I want that awesome "dust seal installer" tool! Where has that been all my life? Also, in a few other sizes besides 30 mm, if possible! And in a nice folding case, where they are arranged in ascending order, from 25 to 35 mm, in increments of 0.5 mm! I'm embarrassed to admit that I've been pushing in these dust seals with my bare hands, like a complete troglodyte.
Do all suntour forks use the same size dust seals? I use a Suntour Duro DJ fork and I looking to replace the seals, but I am not sure what size dust seals to get. Any advice?
dddzzzdddzzz I only have wobble on 1 stantion which has the shock in and I think the shock is leaking causing the wobble but im no expert should I change the seals out incase it's just them? Or get the shock checked?
Where do I find these sleeves ?? I just had my forks powder coated and didn't see them in there so they got completely destroyed ( melted ) during the process... Please help ! Thanks !
You get a spare part list of all Suntour forks on their website, with the spare part numbers. With this number you should find it in Internet shops, or at a local dealer.
Тобто, треба якимось болтом з гайкою вирвати втулки, щоб фіксатор обов'язково відламався, полетів у невідомому напрямку і прилип в непередбачуваному місці. Провернути втулку на 90градусів і вийняти пальцями релігія не дозволила.
Richter Schumann Я понимаю что он новые ставит но старые вытаскиваются очень легко даже пальцем просто повернув их в любую сторону на 60 градусов или даже 45.
Helped so much, was struggling so bad to get them out
This fork is brand new...try to do it on M2000 after 2 years of using...
I want that awesome "dust seal installer" tool! Where has that been all my life? Also, in a few other sizes besides 30 mm, if possible! And in a nice folding case, where they are arranged in ascending order, from 25 to 35 mm, in increments of 0.5 mm! I'm embarrassed to admit that I've been pushing in these dust seals with my bare hands, like a complete troglodyte.
+Kazinator ROFL
instablaster
Cómo se llaman lo que sacas de la botella ?? Grasias
Do all suntour forks use the same size dust seals? I use a Suntour Duro DJ fork and I looking to replace the seals, but I am not sure what size dust seals to get. Any advice?
You can get any part of sr suntore forks from tesco direct cheap
hi, all the suntour forks you use the tool to mount the 30mm seals?
how do you tell if the slider sleeves are worn?
If the fork legs are wobbly the sleeves are worn or missing.
In shitty cheapos like the Nex model - when you've done 100 kilometers in the rain. :)
dddzzzdddzzz I only have wobble on 1 stantion which has the shock in and I think the shock is leaking causing the wobble but im no expert should I change the seals out incase it's just them? Or get the shock checked?
I'm going to make some sliders but full instead of the bit that's cut out, see if it makes any difference there shit and don't last 2 mins
What fork was this procedure performed on?
M3030
Where do I find these sleeves ?? I just had my forks powder coated and didn't see them in there so they got completely destroyed ( melted ) during the process... Please help ! Thanks !
You get a spare part list of all Suntour forks on their website, with the spare part numbers. With this number you should find it in Internet shops, or at a local dealer.
Where can I get these sleeves? I'm not sure that anyone in the UK stocks these, do they?
Какой диаметр штока у етой вилки
Esta muy bueno el video pero lo malo es el audio no se escucha nada. Ni con audífonos!!!!
Тобто, треба якимось болтом з гайкою вирвати втулки, щоб фіксатор обов'язково відламався, полетів у невідомому напрямку і прилип в непередбачуваному місці. Провернути втулку на 90градусів і вийняти пальцями релігія не дозволила.
Мужик гонит срывает башинги с петель нахрен!!!! Это что за сервис такой?
Gauri Rubaka Он новые ставит.
Richter Schumann Я понимаю что он новые ставит но старые вытаскиваются очень легко даже пальцем просто повернув их в любую сторону на 60 градусов или даже 45.
Gauri Rubaka Сегодня пытался разобрать вилку, один башинг рукой снял, второй вообще не крутится не по часовой не против и не выходит. Как-то так
First say dont touch inner side metal, then uses hard force with metal
what a noob you destroyed the plastic cartridges i got these off without any brach
He replaces it, so it don't matter. If you want to use it again, you can turn them 90 °, and pull it out.
thank you@@simonm1447