Suntour Fork Lockout Repair
HTML-код
- Опубликовано: 24 окт 2019
- I show how to fix the lockout on your SR Suntour forks. These instructions are for Suntour forks with a blue speed lock lever (hydraulic lock-out). These are the instructions Suntour has on their site to adjust your lockout when your lockout is not working. If these instructions do not fix your lockout, it's possible your lockout cartridge is damaged or broken. I have seen some replacement lockout cartridges available online. You will have to determine what type your fork needs. Not sure if a non-working lockout cartridge can be repaired. If I get one, I may give it a shot. The forks in the video are Suntour XCR forks.
▶ SUBSCRIBE & HIT THE 🔔 bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
/ rjthebikeguy
▶TOOLS
www.rjthebikeguy.com/tools
▶SHIRTS
bit.ly/RJBikeGuyShirts
▶WEBPAGE
www.RJTheBikeGuy.com Хобби
For more bike repair videos hit the subscribe button 🛑 and click the notification bell ► bit.ly/SubRJTheBikeGuy
Good video!!! I'm new on bikes i have the same fork, what is the function of the preload? I appreciate your help thanks!!
You're a lifesaver. I was about to contact the vendor for selling me a fork with a broken lockout and after watching the video fixed it in two minutes :D.
Is the blue lever part in 2 pieces ? I have XCR but the lever looks different to that
Have you done a fix rebound video ?
HELP ME OUT ! I have a cube hardtail. And the lock(red dot) and unlock(green lock) fork indicator for the fork. I noticed that my bike mechanic put the cap in the wrong way bc when i lock it it is green and when i unlock it it is red. Can i fix this by just removing and puttin the cap back on
Thanks RJ you really saved me a few years back I moved to the Netherlands and needed to earn extra money for my family and fixing bikes to sell really saved me as I knew nothing about bikes.
Aaahh. I am really very grateful to you. I have had this fork for almost 2.5 years and everyone told me it was broken because it hadn't moved. thanks to you, it works perfectly now. lol 🤣
I've been repairing bikes since I was a child. No-one taught me, and over time, mainly through trial and error, II earned a reputation for being able to fix almost anything. I don't drive because of my (adult) ADD, so have cycled almost everywhere in my life. Consequently I consider myself something of an expert. Not being arrogant or 'owt like that. It's just accrued knowledge over the last 45 years (I'm 51 now but like I said, been repairing bikes since a child).
But dang it, this bloke always, and I mean *always* teaches me something I didn't know before. Brilliant.
So thanks RJ, and I really mean that. I can imagine that something that took just a minute or so to fix in reality then becomes an hour or two when you add in setting up the camera, various tripod positioning, working the camera itself, all the way through to editing the video and posting it in here for us all to watch, be entertained by and learn something from. Nice one, thank you. 😊
Thanks! Yeah, shooting video adds a lot of time. Reshooting a single shot over and over, just because I didn't like it, or flub what I was saying. In this video I had it shot, was editing it, and didn't like one shot, so went back and reshot it.
Well said.
I had my doubts that that fix would be that simple. But I did exactly as you explained, and my lock out for my shocks work again. Thank you so much.
This was exactly what I was looking for! Cap fell off on a ride and when I tried to put it back on the lockout wasn’t working at all, needed a lot of tightening and now it’s perfect again. Thank you 👌
how long is it taking to tighten? been here 5 mins
Then yours might be broken.
I don't even have suntour forks. I just enjoy your videos.
Richard Roberts I don’t even ride a bike anymore and i still watch
Me too! I love watching people work...
@@michael102 Have you heard of AvE, thisoldtony and abom79? You'd probably enjoy their channels if you enjoy watching fabrication, welding, machining etc.
Deep
Funny you sound like Donald Trump.
Thanks for the video. Thought 'someone' had broke my fork. 5 minutes after watching your video, I'm happily riding with a functioning lock out!
I have this fork. I have this problem. I couldn't work out what was wrong and was going to buy a new fork. Your video popped up. I watched it. I still have this fork but I no longer have this problem!
You're awesome. Thank you so much!
Thanks for the great video! The bike store said they couldn‘t repair it because it was very rusty and they told me to by a new one. I just sprayed some WD40 and I could repair it at home. Now it works perfectly fine :)
Had the same issue with a slightly newer version of the fork you have in this video, but it worked a treat for me and fixed the lockout issue. Thanks a lot mate!
Thanks! 5 minutes of my life and now I have the lockout working again!
You are a life saver - I somehow lost the lockout lever and my forks have been stuck on no bounce - managed to sort it - Thankyou.
Thank you for this video I was able to repair my folks that were lock in a few minutes. Saving me money for replacing forks as the bike mechanic recommended.
You're the man as always! You just saved me a lot of time and money! I thought I was going to have to rebuild it.
Dude thank you!!! My Raidon fork started making weird noises yesterday (unbearable to ride with) every time I compressed or released the fork. It was like a clicking / creaking with a bit of play and sounded like something needed to be oiled. I contacted suntour and was told the noise was normal and to keep riding. Naturally I took the whole fork apart (which I needed to do anyway to increase travel to 120mm). I put the fork back together and still had the same noise! It was so bad that I really contemplated not being able to ride with this fork and if I should look for another one. After watching every video online about this fork I came across yours. Sure enough the Allan key bolt under the lockout wheel was completely loose and there was grease all over. I tightened it and the noise went away. Thank you!!!!
I've just bought a new Whisper electric bike and lockout has stopped working just days after purchase. Blue lever flicks back and forth like it's not doing anything, very loose. Hoping this easy fix solves it as it'll be a trip to the bike shop later today.
Thank you very much RJ. 3 days back i told you my lockout was screwed and a video for that is already uploaded. Thank you very much!
ruclips.net/video/kzz915SsEkw/видео.html
Fantastic thanks; fixed my lockout. Spindle was tricky to get out, as had rusted in. But coaxed out after few drops of light oil.
Hey there, thank you for your guide! Bought a brand new bike but it has non working lockout. I even thought about refunding my bike but your video helped me not to do it. Thank you so much!
I'm glad that thru your video, you are able to help a lot of people. I also have the same issue with my suntour fork but unsuccessful so far to fix it.
I had a hard bump with a rock on a rough road and since then, the lock out no longer works.
When I watch this video, I though this would be the solution but no! the nut at the top could not be tightened, it just turn and turn.
Thanks for this RJ and for all the others that have taught me so much about my bikes.
Another helpful video RJ thanks for the input. You really have covered so many subjects and saved people money and time. All the best Andy
Sorted my issue, you’re a life saver dude thank you so much for this video
Absolutely unblieable from bikeguy, I was just started the maintenance on this very same fork with my exact intention to service the lockout. Just went to turn on your channel and here you go... absolutely amazing and thanks again for your good work.
Exactly what I was looking for and it worked perfectly. Thank you so much!!! Very helpful
Mate thank you so much I thought I was screwed my forks wouldn't go back soft man you have saved me was so stressed now I can hit trails again haha thankyou
Thank you so much for these explanations ! I have just fixed my fork lockout
Helped me fix my lockout in under 5 mins! Thanks from Wales 🏴
Saved me 60 bucks from buying a new lock out kit ! Super thank you !
Simply brilliant and so helpful! Thank you so much.
Thanks for the help! I had no idea what locking cap I needed and you helped me with shopping and installation. Thanks
Thanks for the video! Saved me some time and money. Thought I would have to buy a new lockout lever. Now I know I can just use a 4mm allen wrench (shown at 1:00). No need to purchase a new lever just to have it fall off again.
Perfect how-to video. I was able to quickly fix the lockout on fork using the instructions.
Thank you very much for your support, I managed to repair my bike! greetings from Argentina.
Thank you for this vid i was worried i broke it because im a beginner in biking and i fixed my fork just by watching this vid! Thank you!
Excellent advice. Sorted out my son's forks! Thanks.
Legend mate just bought new bike and this saved me
Thank you so much, took me ages to find an easy repair lol.
Thank you! Saved me a trip to the bike shop and took 2 mins to fix
God, thanks for this video, in the Russian segment of Google there is no information about this lockout. I just had to search in English and the first link gave me a solution to my problem))
this is why i'm a subscriber.something commonly on bikes needs fixing?
RJ has covered it
This did the trick for my newly purchased (used) bike. Thanks a lot!
Thanks RJ. Great vid and saved me a trip to the bike shop.
Awesome. Good content as always. Thanks RJ.
Shit to my contact address for a phone bill to send you to me
This guy has helped me twice I can’t tell you how thank ful I am of this video thanks mate your a like saver 👍👍😑
Your videos are really helpful. Thank you. 🙂
Thank you so much my forks came factory without a working lockout and this fixed it.
Great video! Bought a used bike and this was the fix!
Thank you so so much 👍
Short and useful instruction, thanks a lot! 😄
you've made my day by saving hours and £££££. Thankyou
This fixed the front fork on my Trek Marlin! Thanks so much for the vid!
this is exactly what i want to know. now i solved the lockout on my bike. thanks!
Thank you for a great troubleshooting video! I will need the cartridge but at least I know what to expect!
Thank you so much master.Greetings from Turkey🇹🇷
This worked like a charm! Thank you so much!!
Nicely done 👍🔧
While I was riding my hard tale the front suspension got stuck so I took it to my local bike shop. The man who waited on me told me it couldn’t be fix and to replace it would be $190 to 250 depending on the fork plus labor. No way Would I spend the much on a $700 bike. Fortunately I came across your video and it took me less than five minutes to fix my fork. Thanks
This worked Great and took me about 2 minutes! Thank you! have subscribed for more!
RJ you rock
Taking away the mystique
I took my voodoo bizango to 2 repair shops and they said naaah we dont touch forks take it back to the manufacturer for fucks sake !!
So I followed ur instructions
and within 5 minutes the forks were sorted .
I just subscribed thanks
Yr a fucking king !
Thanks for this usefull tips, from Colombia, thanks again! 🇨🇴
Gracias, excelente video me salvaste... justo me llego una trek marlin 6 y pense que vino con falla de fabrica y con tu ayuda lo solucione... gracias
Thank you! My time was saved by this video 👍
Thanks a lot! It worked. I have suntour XCR (with blue lever).
Thanks you VERY much! Now my bike is work! 👍
I didnt want to touch it because of varranty also didnt have time to go service. Anyway i fix it in two minutes. Thank you :)
Thank you from germany , this did help me a lot today 👍👍👍
My man's u just got a new subscriber!
Thank you so much RJ.. This is very helpful
Love this guy so much thank you
Thanks very much for the help. Gonna try now!
Thanks RJ that's what I've been looking for )
Thank you man, I was able to fix the lockout on my Talon 2.
Worked like a charm on my voodoo bizango! Thank you
I dont even have suntour forks but this vid helped me fix my trek bike forks
Brilliant and simple!
Thank you, finally i can repair my fork
Thank you so much! My Brand new bike fork was not working good. Now it is fine. It was a wrong lockout setting from factory.
Very helpful video sir! Kudos!
Thanks RJ. Perfect.
You actually saved me, thanks !
Thank you a million worked a treat.
Great...just subscribed...i'll try work on my xcr now...hope it works..thanks.
very helpful, thank you.
dont even have the same brand forks but this still help me out cheers
Thanks! Just fixed mine.
Great vid.Thank you.
very nice, you save my fork, bro. Thank you.
thank you for help me to resolve my doubts..
This allowed me to unlock and get the cartridge back into fork, mine is a simpler cap which is annoying and it just button fits to allen head...at least I will leave it in the unlocked position now till U upgrade the forks.
thanks!! the biker seller wanted to order me a new fork, unbelievable
Thank you for this video !!!
It worked thank you so much!!
Fantastic..... thanks a million👍
Worked perfectly!
Thanks v much for your video i eventually did it..after severel on going efforts & bit of cussing lol..
Why do both the screws turn at once if your not carefull though..
excellent vid & simply explained etc
eternal gratitude again.
Не нашёл видео по этой теме на русском ютубе, но ты мне помог !!!
Thank you again sir
great explanation.
What do I do if the 4mm is tightened (in lock out position) and it still does not lock? what is broken?
Perfect! You have e really helped me😊
Thanks man,it worked for me