Thanks to you, I now know that I can actually replace the broken preload on my xct fork, whereas a local bike shop told me that I would need to buy a new fork cause the preload would be pressed in instead of screwed in. I ordered the correct preload and the corresponding wrench for a little fraction of the prize of a new fork. Thank you very much.
Great video, excellent resource saved me from racking my brain trying to figure out how it opens. That 3d print worked perfect at 104% size on my sr suntour xct for 26” wheels. Additionally if you want to remove the seals and inner fork sleeve suntour youtube channel saved me on that also.
Thank you very much! I've done this service with my XCM30. But, this time, I'll do the service in the bike of my friend, equiped with a XCT, and was in doubt if it would be similar.
Hi, I love your videos. Can we clean the sleeves inside and replace the bushing too? just like the video you did without the lock out mechanism. Thank you!
Thank you for the kind words. The sleeves can be removed and replaced, I forgot to do it for the video though, oops! I documented the process of removing them a little better in this video on the M3010 series, ruclips.net/video/uAQzXqL8Q4E/видео.html just skip ahead to the 3:00 minute mark and the same technique applies to the XCT!
It's best to open the lockout so that it moves freely, but you can still take it apart with the lockout engaged! You can stick a hex key in there to adjust the lockout once you've removed the cap if it becomes an issue
How do I find out how to get a stiffer spring? Or do they make some kind of preload spacer I can put under the preload cap? I have forks similar to this on my E bike, but they have no labeling of any kind, but I believe they are SunTour
It looks like if you have an XCT LO model, there are soft, medium and firm springs for sale on SR Suntours site, but I haven't been able to find any direct aftermarket springs for this particular model. I'm sure there are some out there that fit, but it might take a little experimentation to find one that matches up well!
It's been difficult to get typical pricing lately, but these cartridges can be bought for about $40 dollars or so right now on SRSuntours main site. I'm not 100% about the fitment, but they have some on ali express for $30 or so dollars too.
Don't know if this is still relevant to you, but I will explain it anyway. Also I don't know your experience level, so I will go rather detailed. There are some variants of this fork. Some have two steel springs inside some have a spring and a dampener (the part you indicated), but both tubes should be populated by either of the two. A dampener basically is used for slowing down the speed that the spring contracts and extends with, e.g. through increased friction or flow of a liquid through a tiny opening (there are many ways to achieve this, some rather simple, others more complex). It also takes energy out of the system, which means if your spring was oscillating, with each oscillation the dampener would take out a bit of energy and translate it to heat, making the next oscillation cycle a little shorter in length. Actually on suntour's webiste you can find the construction plans of those forks including the part numbers of individual parts. Make sure that the name of your fork matches with the name of the fork specified in the document. Be careful: a comma used in the name in the document might indicate that the document specifies 2 slightly different forks. e.g. the document for the "SF16-XCT-DS-HLO-29-80,100" specifies two similar forks with 80mm travel on one and 100mm travel on the other fork, thus the name of your exact fork will either end on 80 or 100, but not both, eg: SF16 XCT DS HLO 29 T 100 (that's what might be written on the fork somewhere). Variations in the parts can depend on the exact model of the fork, the wheel size... For the fork named above, intended for a 29 inch wheel, the number for the dampener would be FUN050-14 (don't ask me how they came up with that part number😂). The parts can be found online for sale.
![БЮДЖЕТНЫЕ вилки SR SUNTOUR. Все про XCE, XCT, XCM, XCR, M3010 / ПРО [БРЕНДЫ]](http://i.ytimg.com/vi/LTitb06hmng/mqdefault.jpg)
![БЮДЖЕТНЫЕ вилки SR SUNTOUR. Все про XCE, XCT, XCM, XCR, M3010 / ПРО [БРЕНДЫ]](/img/tr.png)
Thanks to you, I now know that I can actually replace the broken preload on my xct fork, whereas a local bike shop told me that I would need to buy a new fork cause the preload would be pressed in instead of screwed in.
I ordered the correct preload and the corresponding wrench for a little fraction of the prize of a new fork.
Thank you very much.
Great video good description of process rarely get videos like this well done
Great video, excellent resource saved me from racking my brain trying to figure out how it opens. That 3d print worked perfect at 104% size on my sr suntour xct for 26” wheels. Additionally if you want to remove the seals and inner fork sleeve suntour youtube channel saved me on that also.
Spectacular video, well made and really well described!!!
Thank you very much! I've done this service with my XCM30. But, this time, I'll do the service in the bike of my friend, equiped with a XCT, and was in doubt if it would be similar.
Fantastic video! thank you! and love your chill voice dude. Peace
you are talking like a asmr so loud lol
Thanks a lot for this video.
super, thx😊
am trying to find out how to fix a stuck preload dial on that fork, mine is stuck past weak tension.
This was useful to me
Lo logreeeeee!
Gracias brother!
Well done
Hi, I love your videos. Can we clean the sleeves inside and replace the bushing too? just like the video you did without the lock out mechanism. Thank you!
Thank you for the kind words. The sleeves can be removed and replaced, I forgot to do it for the video though, oops! I documented the process of removing them a little better in this video on the M3010 series, ruclips.net/video/uAQzXqL8Q4E/видео.html just skip ahead to the 3:00 minute mark and the same technique applies to the XCT!
@@crossedhelix8698 Cheers buddy.
keep up the good work! =)
When I first heard your voice I thought you are going to tell me a secret that no one knows! Alas, that cognac like voice did no such thing
This might be a stupid question, but is it possible to remove the lockout mechanism and just put in a spring like the other side?
Ypu cant
@TAR-FF Good to know, thank you, SIR!
Eu uso uma suspensão dessas, aqui no Brasil.
Hi, Before removing everything did you close or open the lockout.
It's best to open the lockout so that it moves freely, but you can still take it apart with the lockout engaged! You can stick a hex key in there to adjust the lockout once you've removed the cap if it becomes an issue
How do I find out how to get a stiffer spring? Or do they make some kind of preload spacer I can put under the preload cap?
I have forks similar to this on my E bike, but they have no labeling of any kind, but I believe they are SunTour
Sf16 xct sd?
my man needs a pop filter so we don't hear that saliva in his mouth
A pop filter dosent do this
Hi is it ok to use slickolium mobile 1 together
Do you have a .stl file for those 3d printed spanners?
Have you done a 32mm xcr?
Great video!! Can left spring be changed to different spring tension/compression?
It looks like if you have an XCT LO model, there are soft, medium and firm springs for sale on SR Suntours site, but I haven't been able to find any direct aftermarket springs for this particular model. I'm sure there are some out there that fit, but it might take a little experimentation to find one that matches up well!
Hi. Can you tell me what you put on the spring? I couldn’t see it from the video.
That was a can of Mobile 1 Synthetic grease, Its super inexpensive and very tacky which is why I like to use it!
Can we get the .slt file for printing tool like you?
there is plenty on Thingiverse
is it suitable for 29T with mt200?
If you’re talking about mt200 shimano hydraulic brakes, then yes, that’s what I have on this fork
1:44 How much will that mechanism cost if it's broken?
It's been difficult to get typical pricing lately, but these cartridges can be bought for about $40 dollars or so right now on SRSuntours main site. I'm not 100% about the fitment, but they have some on ali express for $30 or so dollars too.
omg get the mic a away from your face... sounds like your slobbering... I can't even listen to this
I bought a bicycle with this fork and it doesnt have this 1:41 element inside but it works,what is this part called?
Don't know if this is still relevant to you, but I will explain it anyway.
Also I don't know your experience level, so I will go rather detailed.
There are some variants of this fork. Some have two steel springs inside some have a spring and a dampener (the part you indicated), but both tubes should be populated by either of the two. A dampener basically is used for slowing down the speed that the spring contracts and extends with, e.g. through increased friction or flow of a liquid through a tiny opening (there are many ways to achieve this, some rather simple, others more complex). It also takes energy out of the system, which means if your spring was oscillating, with each oscillation the dampener would take out a bit of energy and translate it to heat, making the next oscillation cycle a little shorter in length.
Actually on suntour's webiste you can find the construction plans of those forks including the part numbers of individual parts. Make sure that the name of your fork matches with the name of the fork specified in the document. Be careful: a comma used in the name in the document might indicate that the document specifies 2 slightly different forks. e.g. the document for the "SF16-XCT-DS-HLO-29-80,100" specifies two similar forks with 80mm travel on one and 100mm travel on the other fork, thus the name of your exact fork will either end on 80 or 100, but not both, eg: SF16 XCT DS HLO 29 T 100 (that's what might be written on the fork somewhere).
Variations in the parts can depend on the exact model of the fork, the wheel size...
For the fork named above, intended for a 29 inch wheel, the number for the dampener would be FUN050-14 (don't ask me how they came up with that part number😂).
The parts can be found online for sale.