I made a 4-wheel bike for my daughter by myself. My goal is to help her have a 4-wheel bike to safely practice riding. Please follow me to see the results.
Из камеры легкового автомобиля вдоль вырежи полоску шириной примерно 3-4 см и длиной около 15-20 см. На одном конце аккуратно в 5мм от края длины проделай поперек полоски ножом отверстие примерно 1 см в длину по центру. С противоположной стороны конец обрежь как крыша двух скатная у дома и на концах скатов от краев прорези до 1 см в центре(это нужно оставить для замка). Потом этот заостренный конец вставь на оси колеса в отверстие прорезанное ранее ножом на другом конце ленты. У тебя должно получится кольцо внутри на втулке колеса. Во время движения оно автоматически будет до блеска натирать втулку и никакой грязи на ней уже НИКОГДА не будет.
Thank you for your review! 😄 I think so too - this design makes control easier, even for those who lack a bit of balance. 🚴♂️✨ I hope it will bring joy and convenience to everyone. Glad you like the idea!"
If you keep the front wheels and only build two rear wheels, you can create a unique model with a special stabilization system. Although the car will not move without a driver, if you design it so that the rear wheels have a stable support system, the car will not fall even when not running.
Rear axle is nice, however, not supporting much load without som. Framing. While the front axle is just stupid. When you turn, it tilts putting load on the inside tire making it less stable.
Oh, I think it's because of the camera angle or the rough road. Thank you for watching the video and for your positive comments. I will review it to improve it.
Thank you for your comments! 😊 If you have more information or specific instructions about your idea, don't hesitate to share. I'm ready to support and discuss further! Wishing you success with all your creative projects!
Thank you for sharing your opinion! 😄 It's true that easy maintenance is always important. I will consider how to improve to reduce maintenance difficulties. If you have any more suggestions, don't hesitate to share!
I personally hope to bring joy and interesting discoveries to everyone with these homemade products. Thank you for watching and continue to support my RUclips channel
Девочка довыпендривалась короче. Батя отжал велик и сотворил чучело😂 Ездить на этом явно не стоит. И все на сварку посадить, типа первый и последний раз.
Haha, that sounds interesting! 😄 The girl bragged that the bike was pulled out and turned into a scarecrow, obviously unable to ride! But this is a great example of how the creative process is never simple. Sometimes, you will have to try and fail a few times before finding the right way to do it.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I made a 4-wheel bike for my daughter by myself. My goal is to help her have a 4-wheel bike to safely practice riding. Please follow me to see the results.
Из камеры легкового автомобиля вдоль вырежи полоску шириной примерно 3-4 см и длиной около 15-20 см. На одном конце аккуратно в 5мм от края длины проделай поперек полоски ножом отверстие примерно 1 см в длину по центру. С противоположной стороны конец обрежь как крыша двух скатная у дома и на концах скатов от краев прорези до 1 см в центре(это нужно оставить для замка). Потом этот заостренный конец вставь на оси колеса в отверстие прорезанное ранее ножом на другом конце ленты. У тебя должно получится кольцо внутри на втулке колеса. Во время движения оно автоматически будет до блеска натирать втулку и никакой грязи на ней уже НИКОГДА не будет.
👍🔥🚲❤
Thank you very much. Please come back to my next videos.
@@HTN_Vegetable 👍🚲🔥
Outstanding great job well done 👍👍 and your daughter will make you a richman if you put your idea to good use good luck 😊😊😊😊 🤞🤞
Thank you so much for this wonderful encouragement I hope you will continue to follow and give me more comments
ATV cycle my friend 👍
I am so happy for your great encouragement please come back to my next videos
great work and great bicycle thanks my dear friend ❤♥
thank you very much for this encouragement i will appreciate it
Muito bom, ideal para quem não tem equilíbrio.
Thank you for your review! 😄 I think so too - this design makes control easier, even for those who lack a bit of balance. 🚴♂️✨ I hope it will bring joy and convenience to everyone. Glad you like the idea!"
What was missing, was the little girl riding it at the end like she did in the beginning.
yes that's right i will need to do better in the next video
👍🏻
Good work my friend
oh great to have someone who always supports me thank you i am grateful to youtube for bringing you here with me
You could have stopped with only the 2 frontwheels and made it a tricycle.😊
yes
В любой не понятной ситуации: Вари подшипник!
Сашка Полулях полное собрание сочинений
I don't really understand what you are saying, but I will take these comments and thank you very much!
@@HTN_Vegetable Вы приварили подшипники прямо к перьям. Не делайте так. НЕ НАДО ПРИВАРИВАТЬ ПОДШИПНИКИ. Примерно как-то так.
Глаза!!!😎
New subscriber you should try make a 5 wheeler tricycle bike
wow what a great idea i never thought of a 5 wheel bike
Мне кажется что с переди надо делать ось коромысло, для устойчивости.
Спереди там даже на видео видно как бьет руль. И будет бить. Либо вилки ставить амортизационные. Что бы хоть как то идея работала
а на коромысле два ведра воды для устойчивости
😂😂😂👋👋👋🇨🇴👍
Theo tôi nghĩ bánh trước vẫn giữ nguyên chỉ chế sau hai bánh thôi,xe ko chạy ko người giữ xe vẫn đứng ko bị ngã.
If you keep the front wheels and only build two rear wheels, you can create a unique model with a special stabilization system. Although the car will not move without a driver, if you design it so that the rear wheels have a stable support system, the car will not fall even when not running.
Rear axle is nice, however, not supporting much load without som. Framing.
While the front axle is just stupid. When you turn, it tilts putting load on the inside tire making it less stable.
yes that's right i think this version is not good i will make it better if there are more suggestions
Și când vrei sa întorci nu merge😂 ca ai sudat ambele roti pe ax una trebuia sa meargă liber😅
this i need to improve thank you for the advice
Дифференциал нужен. Или обгонные муфты.
Но...
Межколёсная база - маленькая. Конструкция лёгкая. Колёса будут достаточно легко проскальзывать.
Why the handle is shaking????
Oh, I think it's because of the camera angle or the rough road. Thank you for watching the video and for your positive comments. I will review it to improve it.
ну как вы любите вначале сюжета делать дешёвые ремарки
Thank you for your comments! 😊 If you have more information or specific instructions about your idea, don't hesitate to share. I'm ready to support and discuss further! Wishing you success with all your creative projects!
Надо было дочку свою учить кататься на велосипеде 😡😡😡😡😡😡😡😡😡😡😡
nao gostei porque pra fazer manutençao fica dificil
Thank you for sharing your opinion! 😄 It's true that easy maintenance is always important. I will consider how to improve to reduce maintenance difficulties. If you have any more suggestions, don't hesitate to share!
4 колеса оно нахрен не нужно на крайняк и три неплохо держать
Thank you for sharing your opinion! 🚴♂️ Three wheels can bring more stability and flexibility to some vehicles.
επικινδυνες βλακειες
Нельзя все на сварку сажать. Иначе это одноразовое изделие.
I personally hope to bring joy and interesting discoveries to everyone with these homemade products. Thank you for watching and continue to support my RUclips channel
Девочка довыпендривалась короче. Батя отжал велик и сотворил чучело😂
Ездить на этом явно не стоит. И все на сварку посадить, типа первый и последний раз.
Haha, that sounds interesting! 😄 The girl bragged that the bike was pulled out and turned into a scarecrow, obviously unable to ride! But this is a great example of how the creative process is never simple. Sometimes, you will have to try and fail a few times before finding the right way to do it.