Hide You Z-Automotive TaZer - Double Bypass Install - Official Video
HTML-код
- Опубликовано: 3 июл 2024
- 0:00 - Intro
0:33 What You'll Need for the Install
0:55 Remove the Trunk Panel Cargo Cover
1:35 Connecting to the STAR Connector Access Box
3:10 Connect the Double Bypass ground lug
3:33 Install the Fuse Tap
4:55 Plug in the TaZer
5:41 Final Steps
5:53 What to Watch Next
This is how to install the Z-Automotive Double Bypass (Required for 2018 - 2023 Dodge Chargers, Dodge Challengers, and 2018 - 2023 Chrysler 300s)
2018+ Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners.
The Double Bypass kit overcomes this obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module.
For 2017 and older models (2011 - 2017) the Double Bypass Module can not only be used as a secondary OBD2, but also as a way to help hide the Z-Automotive TaZer.
This pairs perfectly with the Z-Automotive TaZer's PIN LOCK security feature which helps to deter automotive theft by locking the brakes and the accelerator pedal when triggered.
Our Pin Lock feature also includes the BrickByFob and KillPedalNow feature, which acts as a preemptive theft-deterrent feature, by pre-bricking the BCM, so even if the TaZer is removed, the gas pedal would remain bricked and unable to be driven.
The Double Bypass will also work on 2011-2017 Chargers/300s and 2015-2017 Challengers, for those that want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.
Quick installation, no wire splicing or cutting - plug and play!
Order your Double Bypass Here: www.zautomotive.com/product/z...
Order The TaZer Programmer Here: www.zautomotive.com/product/z...
Follow us to stay up to date on new products, features, and firmware updates:
Facebook: / zautotech
Instagram: / z_automotive
Tiktok: / zautotech 
Авто/Мото
Best instructional video EVERRRR thank you!!
What a nice comment. We work very hard to bring the best installation videos that we can make for our products, so your comment is greatly appreciated
Swear. I'm watching at my desk and can't wait to get home and install it.
Happy to be of service@@brandonmurray4895
Nice to see an official video! I had to use a few 3rd party ones last week, this is much clearer.
Thanks for the comment. We’re happy with how it came out
@@BigBeezy What's your issue, man?
You say they're sucking up to us, but you're the one commenting on all our videos on every platform. We get it, you're obsessed with us, but it might be time for a new hobby!
Have we not given you enough attention on all the other platforms, or just ran out of led lights to lick?
@@zautomotive🎉🎉🎉
Great instructional video! Was much easier than I thought
Thank you z automotive I just double bypassed my 2014 charger Rt awd with the help of this video.
Awesome to hear and happy to help
This is great!
Glad you liked it, thanks for the comment
Glad to see you guys have grown. I was one of the first people to buy when you guys first came out with the Tranzformer for my 06 RT on the Charger forums.
Hey that's awesome, thank you so much for the support
The good ol 10mm socket
@zautomotive so you don’t need the $62.77 “The Security Gateway Bypass Module” if you purchase this “Double-Bypass is a security
gateway bypass” for $50.03? Correct?
That depends on the vehicle. The security gateway bypass is for Durango and Grand Cherokee. While the Double Bypass (which was the install in this vehicle) is for the the Charger, Challenger, and Chrysler 300
See the page for details: www.zautomotive.com/product/z_tzr/#security-bypass-modules
Can I connect the CARLOCK security product to the OBD port under the steering wheel while connecting taper to the obd in the trunk?
Sure
Can you make a video on how to make the DLR brighter while you're headlight or turn on at night. Or just with fog lights on.
Our product doesn't affect luminance
Quick question you said you wouldn’t recommend putting Hellcat splash screen on sxt challenger ? If I did would cause issues to my car or ecm or engine .
No, you’d just get an airbag light
Could any of this process cause battery drain? I'm trying to diagnose everything I can. If I don't drive my car for about a week, even in ship mode, will cause the battery to be dead.
It shouldn’t, but if a reboot and two sleep cycles wasn’t performed correctly it’s possible. Please email support@zautotech.com
Can the security pin be disabled for dealer service? If a theif was to locate the Tazer and remove it, is the car now vulnerable to theft? With the Tazer installed and a pin code set can the car with an automatic transmission be stolen by releasing the hidden neutral/park release?...Great video.
New video releasing early next week will answer all those question 🫡
I have a tazer for my 2018 r/t I’m basically looking to get the super track pack options the question i have is am I able to get those specific things without the airbag light going off ?
If you set the SRT mode on 2015 to present Charger 3.6 or 5.7 models the vehicle will throw an airbag light. It is a vehicle configuration mismatch and not something the TaZer can change
@@zautomotive understandable appreciate the feedback.
If I buy a new pcm for tuning purposes, do I have to unmarry the tazer before installing the unlocked pcm?
Yes: www.zautomotive.com/FAQ/
I just installed mine on a 2018 AWD pursuit, did the option to keep it in rwd get removed? I was looking forward to that
Should be in the live settings. Reach out to support@zautotech.com if you need assistance
I have one but the the lights won’t come on all wires all in the proper spot not sure what’s the issue
Email support@zautotech.com
Just purchased & installed tazer on my 2019 charger I don’t see PIN code setting
ruclips.net/video/nBb8uGz1Y2o/видео.htmlsi=YYtRjyVj5AnhouzJ
How would I do this for a 2019 Jeep Cherokee KL?
Currently, the Double Bypass is not suitable to be used on the Jeep Cherokee
Can this double bypass cause battery draining issues? I installed mine about two weeks ago and I'm suddenly having problems with battery drainage... My battery tested good. Replacing the battery just in case..
Email support@zautotech.com
I believe I didn’t properly do the two sleep cycles after configuring vehicle settings.. I unmarried the tazer, and did a full reboot followed by two sleep cycles then unplugged the tazer..Haven’t had any problems since. I’m going to wait afew more days to make sure I’ve properly diagnosed the problem, then I’ll get the tazer going again! Thank you!
Can I double bypass my 2014 charger rt ?
Yes, see the description: 2011-2017, the double bypass can be used as a secondary OBD2 or a way to hide the TaZer
@@zautomotive
So, the white Star Connector with the white anfd blue cable is the IHS-Bus right ?
Tazer dt everytime I automatic start my ram trx 2021 it unlocks the driver door
Why?
What’s that have to do with the TaZer?
Do you need the double bypass cause mine only has two wires
I’m not totally sure what you’re asking… you need the double bypass if you have a 2018+ model
Do u have to leave it plugged in or can u unplug it
For all live features it needs to be plugged in
Any idea on why it keeps resetting my radio?
Contact support@zautotech.com
any plans to add taZer support for pre-2015 challenger?
Unlikely, but you can request it here: www.zautomotive.com/suggestions/
@@zautomotive thanks will do. I was hoping for at least the pin locking feature would be great for us folks who own older challengers.
So what does this thing do???
Please read the description
Fake stock cars don’t do it
Ummm what???