6L90 no movement in forward or reverse

This is a disassembly or a tear down of a 6L90 automatic transmission for a no movement condition in forward as well as reverse range. While no movement can come from a check ball it is highly unlikely that two check balls will stick in the separator plate simultaneously. I have seen this failure before but it has only been on 4x4 2500HD work truck pick ups.
#AutomaticTransmission #Chevrolet #6L80 #GMC #Ford #Transmission #Milwaukee #

[@wymple09]

I have never seen an automatic disassembled so fast & easy.

[@mikehanlon9773]

I've never seen that in my 45 years doing trans. Always never a dull moment. great video

[@alanantekeier2305]

I work on a lot of the express vans for FedEx, I work at a chevy dealer, I see a lot of those failures. they over load the vans with stuff and just pops the weld. Also see it a bit on 2500 trucks with gas engines

[@jaycortez375]

Where are you located, have the same issue with a sierra 1500

[@TravisSmith-k7d]

I have a 2017 chevy Silverado and I bought it wrecked and completely swapped a new frame after getting it all back together fired the truck up it makes an awful buzzing noise and when I I put it in gear and it moves but when I give it more gas it’s like it been thrown in nutural and engine revs up then as the rpm’s drop it will move again but reverse works fine

[@esoterictransmissions]

@@TravisSmith-k7d Inspect the fluid level as well as condition. If it doesn’t smell burned you can remove the pan and inspect for debris or remove valve body. It could be a check ball if the fluid is clean. If not there is something else going on

[@hermanjones4124]

I HAVE A 2014 6L90 THAT I JUST REBUILD AND NOW IT DRIVES AND CHANGES GEARS GOOD BUT AFTER A WHILE OF DRIVING WHEN I STOP IT WILL STOP PULLING IN FORWARD AND REVERSE WHEN I TURN THE VAN OFF AND BACK ON IT DRIVES CORRECTLY UNTIL I STOP

[@projecttuning4453]

This is happening to my 4l60 have you figured it out

[@esoterictransmissions]

Sounds like you have a torque converter failure. You’re able to drive it until the filter is stopped up with meta.

[@killerrf]

Is it normal for the HD 10 spd gm transmissions to have a whining sound in gears 4-5-6?

[@enriquegarcia2357]

Where are you located? Is possible to ship you the transmission to get that rebuilt treatment 6l80 from a 2013 tahoe

[@GrandPitoVic]

I just bought a 2015 6l90 from a 2500 2wd. It will not go forward or backwards. The sfift selector feels odd. The output shaft will not spin. Sound like a shifter replacement?

[@esoterictransmissions]

Something is wrong internally

[@GrandPitoVic]

Thank you very much

[@Rehziicodm]

Would this made it seem like the transmission is locked up ? Tried to pull the truck in neutral and it won’t budge no brakes are hung up etc there is a engine code as well

[@esoterictransmissions]

If something is snapped in the trans it should always move in neutral. Try removing driveshaft and see if it rolls

[@Rehziicodm]

@@esoterictransmissions removed driveshaft and it moved only way I was able to move the truck out of the garage

[@esoterictransmissions]

@@Rehziicodm definitely something in trans transfer case or diff binding

[@Rehziicodm]

It’s definitely something in the transmission it’s 2wd and it rolled once I pulled the driveshaft . Im thinking torque converter or solenoids gonna look at codes and fluid today ! When you shift it to reverse or drive you can hear it idle down and try to engage but it’s completely locked up in any gear

[@Rehziicodm]

@@esoterictransmissions the tip came off the parking rod and it was binding up getting stuck in park .