1967 Chevrolet Impala Abandoned for 16 Years! Will it Run?!? The rustiest frame we've seen to date!
HTML-код
- Опубликовано: 28 ноя 2021
- I recently acquired this one family owned 1967 Chevrolet Impala 4 door sedan that is equipped with a 283 engine and Powerglide automatic transmission. It's been sitting since 2005 and is in generally poor condition. And that means a lot coming from us! This car is SOLD! As always, thanks for watching!
Check out our new and improved Mortske merch site!!
shop.spreadshirt.com/mortske-...
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: mortskerepair@gmail.com
Instagram: / mortske_repair
Ship us things:
PO Box 1
Gwinner, ND 58040
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $33 shipped
SS4 0.625" wide long handle $31 shipped
SS5 0.625" wide short handle $28 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Tools we use:
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Trouble light: amzn.to/33756kQ
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Carrying case: amzn.to/2ScTqeh
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.com/user?u=49148891
#impala #supernatural #mortskerepair #67impala #67chevy #bodywork #67impala #fishing #oneowner #bondo #crewcab #nostart #brakes #suspension #clutch #upgrade #transformation #rustfree #starter #dailydriver #restoration #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #hackmechanic #mousehouse #mice #powerglide #283 #barnfind #abandonedcar #chevyimpala #chevrolet #hardtop #sedan 
Авто/Мото
Visit Mortske at your own risk! Expect to be ridiculed unmercifully. ;0)
Keeps the riff raff out!
@@MortskeRepair Does not. I'm still here.
I need better friends who I can watch do what you do.
It does have the optional corner parking lights
Just trolling hem a little
I think you are on the right track with this 283 going in the bubble top!
Love Mortske Monday!!! A bunch of us mentioned your channel on VGG’s page on the Facebook. You and Puddin definitely deserve a million subscribers. I make sure to share every video.
You are right 👍
Thanks much David!
Don't forget Jennings Motorsport! He's done some epics, electrocuted, fires, wrestling with 50's engines locked and untouched for 60 years and some real old stuff!! Not the got the production polish but he's getting there....plus he sounds so much like Trey Gowdy it's ridiculous!
I don't know if that was a good idea. I just saw Derek put flexy hose on his old Ford pickup.
I love these old Chevy's. In the late 70s, I had a 65 wagon with gray primer spots on it. That car drove like a powerful cloud. How could we have known??? Time travel back to 1972 and bring a few SS 396s back to today!!! Thanks so much for keeping these magnificent cars alive Mr. Mortske!
Over an hour of pure enjoyment. Glad I'm off on Mondays to watch you and Puddin most times. The only sad part is waiting a whole week for more! Lo e you, love Duff. Best Holiday wishes to you and yours.
Thanks much Renee!
Oh man that's my dream car. Even in that condition I think it's beautiful. Hearing that thing run after being idle for so many years was great.
That motor and transmission are solid 👌. Rest needs to be hauled to compactor. One thing about GM V8s is the distributor placement. I really loved crawling on top of the motor to set the points, not to mention if you opened the hood after a rain , water would run into the distributor. Oh fun times.
In 1974 I bought a pristine grampa car. 1967 Belair 4dr, 250/6cyl 3 on tree, am radio, under dash ac. It had 42k on clock. In the era of 55mph it was perfect. Served me well for years. Solid car, built up your arms with that Armstrong Power Steering.
Nice!
i laf my head off every time you do the clips of jimmy and the dip stick. i gees you stuck as the starter king. dang.shes a runner. cheers morsk.
I’ve heard him called worse then Starter King for sure ! Lol
Gotta like those 283s two speed. Slush buckets.. bring it back memories of my 64 impala
You and Duff 🐕 make my Monday's awesome! Thank you for all you do!
You rock!
I'm amazed you were even willing to put your full weight on the seat with the way that frame is. You're a braver man than I.
Bein brave and bein dumb are 2 very different things!
One of my first cars was a 67 Impala. 2 door hardtop with the 327 turbo 400. It was a very sweet ride and fast for such a big car.
Since the premiere of the TV show "Supernatural" 67 Chevy Impala 4 drs have been sought after so the new owners can clone them into the one that was in the show. Some buyers have made offers that the rest of us would find insane.
Yep, which is why it's so hard to find them. I like Supernatural too and Dean rocking the 67 Impala. Chevy just didnt make enough of them. I wish I had the space for this. Needs a ton of welding on the body but it would be cool to cruise in this!
Yeah, this would be a 10k car if it was a hardtop!
man i love this channel! Such great programming from Mortske and Duff dog! Thanks for all your hard wrenching and dedication!
THE MAD LAD ACTUALLY DID IT! Best year of Impala
65 and 67 full size are the best. This one has a good grille and bumper. Not much else. POS two speed and probably 10 bolt rear.
last person id expect to be commenting on a mortske video
I got a nice original 63 impala 2 door
I wouldn't say it's the best year!
65-66 are my favs.😁 Impala SSs of course. Some good parts on that 68 Impala. I'd like to have the ps pump n alt brace👍
I was expecting the frame to buckle but she survived! We had a 1967 Caprice wagon growing up, basically the same as the Impala, 283 with a powerglide and factory posi. First car I ever drove by myself. Good memories!
Love wagons and a Caprice none the less!
I remember growing up, seeing those driven daily, and I never giving them a second look. Nowadays, I get a kick when I see one on the road. That and old station wagons!
Great video! I watch a lot of "Will it run" stuff on You Tube and it's pretty much the same story on all of them.
Old chevy small blocks wanna just run forever. Thanks Mortske and Duff... this was a good one!
As the weird vw guy in the room, I'd watch you get a tdi running! As always thanks for the great content and pet duff for us!
Duff watching you try to put air in the tire like "Who you kidding? Can't ya see the holes?" I had a 68 with a 307. It was a pile, but it kept on running.
In spite of it's rusty body this Impala is really a good looking Chevy. Hope it'd be put on the road again. Thumb up !
It was a shame to see your starter streak end, but be honest, we all knew it couldn't last forever. Good to see Duff find something he likes the smell of!! The late 60's Chevys were land yachts. Don't recall them lasting very long either. I've said it before and will keep on saying it, Gotta love them SBCs. Thanks for the video. Keep up the good work!!
Thanks Gary!
Thanks for making Mondays better, Mortske!
Thanks for watching and commenting Stephen!
One of the most underrated channels on RUclips ! Mortske I love your channel and all the content buddy !
Whal...that thar mortske
Feller brought another
Relic back around..bravo
Lad..bravo
It's a chevy.. but with Mortske and Duff Dog.. Im watching!
Look out now Rev! You gotta leave that Chevy trash talk on your page. Haha
Fords are too hard to make run!
That 283 sounded decent with minimal smoke. It's a keeper the engine that is,the car not so much
Puddin Fab Shop , Vice Grip Garage and Mortske Repair , the best channels on RUclips ...
Greetings from Chihuahua Mexico
Just bought one of these for my lady. $5500.She loves the show and loves the car. Not gonna clone it. These cars are just art on wheels. Chevy 350, no power steering, low rider conversion. Some work to do but nothing will beat the feeling of burning the tired when it’s done.
Best episode of Mortske ever! Loved this one. Can’t believe you didn’t die taking that thing up to 70mph. lol.
Not my brightest moment!
283’s are a respectable engine, I’ve always liked them a lot and had good luck. I’ve had and driven several old C50-60-70 trucks, most of the time they were the only ones that would fire right up Lol
Thank you for bringing back the exhaust cam, it’s awesome. The smoke cloud is the coolest part of every first start.
Thanks Steven!
All that wallpaper and custom seat cover. Alvin loved that car and took pride in it. Makes me happy.
I’m impressed with show and you read the comments. I love the sigh on your face of the impending repair ahead. Duff keeps you going!
REad em all!
This year Impala is really difficult to find. Wished I had the space for it I would take this in a heartbeat.
Hey Buddy, looks like you found a good engine and trany. I agree the car - not good. Would like to see you do a build using some of these parts. Great video, take care 👍
I owned and restored 2 67 impalas in 2010-2016 and I miss them both. Absolutely gorgeous looking cars in my opinion. If you ever want to sell it, I’ll definitely take her off your hands. They’re few and far between now in Ohio. And you mostly got people with their half ass supernatural replicas wanting $20k for one. 🙄 awesome video man!
It is for sale , in the description
More info on the sale in the video description.
Making lasting memories. You'll never be forgotten in his world.
The flying mouse motel ran great for minimal fiddling, who new it was going to run that good, the rest needs to go into the shredder, no offense to those who love a good rust bucket. Duff seems to like old Chevys no matter how nasty, all the debris kicking up during test drive had me choking, note to self, N95 for mouse motel test drives.
Can’t believe that thing went down the road again that good and the brakes were still up. For how rough it looked I’m shocked 🐭🐀💩
@@Ian-of9oi The badly welded on angle iron on one side of the frame wasn't to confidence inspiring, I don't think even Mortske would jump it like an old motorhome. Ha!!!!
Hi Mortske and Duff. Superb stuff as always. The engine sounds good and if the transmission is good, then these could be used in another vehicle. Unfortunately the bodywork looks too far gone, and probably not worth the effort. Again another enjoyable video that I thoroughly enjoyed. Cheers Chris.
Thanks Chris!
I had a 2 door 68 Bel Air with the 307 and 2 speed. My brother gave it to me when I was in high school because the trans would slip between 1 & 2. I just learned the times and took my foot off the gas. I drove it for 2 more years. Great car.
Best part of a Monday is getting a new video from Mortske!!!! THANKS BUD!!!
Our pleasure Travis!
Just keep them coming ! Look forward to every Monday for the new vid!
More to come!
Yes I'd like to see somebody else have some buyers remorse for a change. I would love to see you have fun with a TDI Volkswagen
Wow! That frams is held together with hopes and dreams! Thanks Mortske, you were brave sitting in all that hantavirus!!!
My pleasure!
Would love to see any car u work on no matter the year. Learning is always useful and can apply to us. Thank u and duff for the videos.
You got it!
I'm surprised all of the "Supernatural" fanboys aren't flocking to watch this video... I'm so glad to see a RUclipsr finally reviving a 67 Impala.
Roadkill had a 67 Belair they got from the junkyard and drove it to Pike's peak. They couldn't drive it back down due to the crappy brakes.
Man, it’s rough. Runs pretty good though! Good work! 👍
The motor and tranny are solid as a rock. Saving the drive-train for the bubble-top sounds like the way to go. Part out the rest. Can't beat a Chevy with a stick !
Bet you’ll get 100k subs by end of the month. Man, the stuff you work on is impressive. Mortske knows all, and therefore can razz whomever he so chooses. Love the treasures you got! Great video as always.
Maybe, but not this month! Thanks much Roy!
Excellent video Mortske Repair :) also 283 V8 motor with 2 barrel carb got 160 hp 210 torque with Power Glide 200 Automatic transmission plus 355 rear end gears and 283 V8 motor is excellent one great engine last long time !
Duff seems to love the car. Did you say bubble top impala?, since the frame is rotted , and if nobody wants it, I would love to see you and Duff put that engine and tranny into the bubble top, they are so cool. Keep up the good work
yeah, 61 bubble
With all the stuff flying out of the window, it should be getting lighter and faster. I think you got a race car there. Love the old 283. That engine would be super for a project car.
My parents had a 67 4 door that exact color 327 with Ac it was a great family car. Miss that car lots of memories
I had a '70. Bought it with unknown miles and full of bondo. Was green, and the floor pan was rotted out driver's side. Like this one, it ran and drove great. I glued a galvanized sheet to the floor with some 5200 and forming it with a deadblow hammer and drove it for a few years until it developed a rod knock.
14:32 made me spew some coffee. Thanks. 😂
Glad you enjoyed that.
Damn Kevin you brought back more memories that was the same exact car same color sitting in the yard of our business we worked at and I had a 67 Scout right hand driver that needed a motor we cut the K member to size pulled everything out and welded it right in the Scout we even used the crossmember on the transmission and cut the driveshaft down what a great swap the only thing that we screwed up on was when we put the motor in with the crane we touch the windshield with the tail shaft of the transmission and busted the windshield. Other than that one of the best swaps known to a 67 Scout. It was the best two wheel drive mud hog in South Florida. Oh yeah and speaking of 14in tires at the time we had the best recap shop known to man, it was actually called Roadrunner Tire company and they stood behind their Recaps they even had 60 Recaps they didn't fly off they'd burn straight down to the core man and they were sticky as hell. Keep making these great videos Kevin I get a big laugh out of a lot of the stuff but seriously I just enjoy watching you getting the suckers running.
That thing sounds awesome!
I think it would be an interesting video if you sent off the old oil from one of these revival vehicles to blackstone and just see how bad it really is.
It's probably not even that bad!
Take a minute to think about what was going on when this car was new in 1967. That was a long time ago. Amazing that it is still around.
Times have changed!
You just cant beat living in a small town. Good friends and good times make for a great life. That Impala is hot garbage. But the 283... A keeper for a cruiser. Nice work Mortske.
Wouldn't trade the small town life for nothin!
too bad its not a hardtop car, those supernatural guys pay crazy for these!
Silly kids...
Gonna have to give this guy a sub. Love the content 👍
Much appreciated Jared!
Thanks for another Mortske Monday! Looks like you'll have you hands full with this one. Good luck and thank Chin for the pain in the ass editing work.🐾
He's a good kid!
The best vidz to watch in the shower 🚿 .. gets my day started everytime, unlike some of those dodgy starters & battery booster packs ..
Great content as always Mortske & Duff! And I have that same sawzall and work with water, those blades kept doing that, sprayed the chuck with penetrating oil and no issues since
I'll give that a shot!
Thanks for making Monday good love watching the show gives me something to do while I’m healing up. Keep the motor and transmission dump the rest
Get well soon Tony!
Bro I used to own this same model/year! I will tell you, never had so
much fun with a car! jumping train tracks, being chased ( I wont give
more details), cruising on strips, and sleeping in the back seat. man I
loved my baby! so proud and happy to of owned this year of car!!!
Nice!
I'm a mechanic in NZ We had one of these in the shop i was working in. We normally worked on European cars in the shop. So i was told "pull the motor and auto out and there's a reconditioned 350 to go back in". Good this will be easy I pulled the motor and box out and left them hanging on the engine crane while i delivered a customers car. I come back and they are gone. The owner had come with a trailer and taken them away. On the floor is a dirty chev short block, two heads, a pan, a new water pump and a dirty th350 with out a dipstick or tube. Apparently he had already sold the motor. I had to get it running and I did. This is what i had to order for it. A gasket set, engine mounts, crank pulley, head bolt, exh bolts, frost plugs, flexplate and bolts, a starter and the special bolts, Hei dist and leads. fuel pump trans dipstick and tube, trans mount and bolts and nuts for everything. The owner turns up with a glimmer belt and pulley kit a fan and a holley and manifold and an alt and mounting bracket and no F%&^^$*G bolts. etc. WE didn't have a unc or unf bolt in the place, Only metric. I had to check the length of every one. I didn't even get the shift lever on the trans. I had to find a picture on the net and make it and the linkage as it had gone with the motor and box. The i had to take the column apart and make it work for a th350. I got it running and it did. I'd hate to think what it cost him. By the way the motor had only had a ring and bearing job and had the heads planed. not even a valve job. He was taken for a ride. The chevs were never sold new in NZ in any numbers. Most here were private imports, so parts aren't thick on the ground like they are in the states.
so cool to see that bad boy running again!!too bad the frame is powdered toast.yah did good on the motor and tranny.some drag racer will love that power glide. thanks again for another great monday mortske.rock on brotha rock on!!! oh yeah rock on duff !! have a great week all!
Our pleasure Joel!
The freaking land barge ,it runs like a scalded ape. The 400 big block it was a beast on the street and the strip.
Its just as easy peasy to hit the like button as soon as i see any new vidz from you,,,!! Cuz i kno im gunna enjoy it,,,!!!
You definitely make Monday mornings better when the weather is shit and keeps me from working. Well done sir👊🏻
Thanks much!
I always look forward to Mondays because of your videos and Puddin's. I saw this and was all happy. It reminded of the Impala from Supernatural
When you passed that row of old farm equipment, trucks, and what looked like the booms of some old cranes that reminded me of when I'd go to the junkyards and wonder what I could make run and drive
Duff is so cool. You’re not to bad also Mortske 👍🏼
Thanks for another great video, appreciate it.
All the best from Australia
Thanks in Australia!
One of my favorite RUclips channels
Mondays are the best !! One hour drops weekly
Your the man mort!! Keep them coming
Many thanks Evan!
@@MortskeRepair just got to up to the starter being no good..!! Atleast the last few had decent starters lol I feel like you got the worst luck with starters man!!
Back when I was driving these things new, the fender vee was a 283, the vee with cross flags was the 327... Who knows no?? Enjoyed the get going, 👍
Not quite. Both the 283 and 327 had the same "V" emblem with flags on it. The difference was that the 327 added a separate "327" number emblem mounted above the V. The 283 had no number, just the V.
My parents had the same car when I was a young fella .. I love it !!
I had a '67 Chev Belair 4 door sedan in 1974. Bought it in September with 80k and sold it in December with 93k. I drove that everywhere during the three months I owned it. It was one of the best cars I ever had!
That's awesome!
My very first vehicle ( 65 Chevy C10 ) had a 283 w/powerglide and my old man put that engine & tranny in it, it originally had a 6 banger and 3 on the tree. But At 16 I ran the bag off that old truck and didn’t hurt that engine and trans. !
love your chanel im 60 and have worked at bodyshops for 35 years now just did a 72 ss camaro that came in one owner car..guy wanted to buy his own fender fine from cali i put it it on the top of fender bit into glass and i could stick my butt in the middle 2nd fender came 3 mths later .i beat it into shape and then used collision glue to pick up the lows .damange i made then light skim all for a 72 ss camaro
Thanks Mortske 👍 old small journal 283 sounds tight
It does!
Been watching for a while.
Have to say that dipstick gag never gets old!😂😂😂
Glad to hear it!
Great video man I look forward to Monday because of your channel
TDI, YES!!! I got one and kinda like it... well, great MPG. Have some fun with it. 👍
I stumbled upon this channel about 4 days ago. Awsome Awsome channel dude. You've got me looking for K20's now.
Much appreciated Nicholis!
Fricken love this channel. Mondays are the best!!!!! Almost makes me want to move back to the Dakota's. Almost.
Thanks much Dustin!
Mondays are better with duff and you stay safe guys
my first car was a 68 crew cab impala with 307 - thanks for the memories! Good save on the 283!
Very cool!
Great video sir. Thanks for sharing
Watching this beautiful classic get the mortske touch.
Love that body style. Can wait to see what happens. Love videos keep it up
Man that car, sigh... I don't know if I want to take it to a De-Derby or pull the good parts off of it and restore a different one. I can't believe Duff was laying in that car. That's NASTY! LOL Loved the video my friend.
I'm one of the Biggest fans if these old Chevys. But this thing is gone .. was great seeing you do an easy one for once well sorta easy for you anyway lol. Thanks for the Monday madness we call Mortske Godspeed
Thanks 👍
1:07:17 … don’t know why I found it soo funny. But I spit coffee all over the kitchen floor. Caught me off guard… too early! 😂 No frame, 1/16 of a brake, boat tank gas tank and 71 mph! Respect ✊!!!
The bank robber look!
Thank you for your sacrifice, Amazing what you do for our entertainment!
Glad you get enjoyment from our suffering!
Motor runs great and the transmission is good you could put the motor and transmission in a 2 door impala or a chevy truck it runs like a top fairly looking car keep up the good work love them old antique cars and trucks
There are Jetta collectors out there. I drove a 1992 VW Jetta from Minnesota to Dayton, Ohio. It was a fun car, with great gas mileage. And it was fricking fast!!! Almost got a speeding ticket in it. We would love to see you work on that!!!
Almost got a ticket in it!! ha
Great video glad you posted keep them coming thanks
Thanks, will do!
Duff looked happy! Didn't see any big spiders. I knew that car would run.
Why is it so windy in North Dakota? It's because Mortske Blows! Love Mortskey Mondays!
Hey now!
Great old car that runs great and has many uses as a parts car, Good that you can move some parts along.
I use mine all the time but it is a good one from carquest when they were in business ! I mainly use it now for surge brakes on my boat trailer !