Clear, proper explanations, no tacky RGB carnival, very well done. Haven't built a Windoze in 15-odd years, would like a proper gaming machine that doesn't look like a tuned car, this was a good kick-off point. Much appreciated! Cheers from Belgium
@@DTUnboxed Hey bro, What are the VRM temperatures on Ryzen 9 + TUF B450 motherboard combo you made in this video? Did you take these measurements with a temperature sensor under a moderate load?
Thanks for the awesome video! I was really surprised to see this pop up on my feed as I'm getting ready to build mine with a lot of the same components you used in yours. I'll be referencing this video once I get all the parts in and start the build. Thanks again and keep up the awesome work!
Thanks for video. A bit dated now, but while the parts have changed names and speeds, the concepts are dtill the same, practically. My last pc build was 12 years ago, OMG!, and really there are more options both altogether, and per a single build. It’s about 1/2 part selection, 1/2 installation, and 1/2 building the OS and tuning BIOS, OS, Drivers, applications, games, the entire world online, and another 1/2 hardening the build. I failed advanced math many times, but I can 1/2 count
I'm planning to buy this case to make a MS-DOS/Windows '95 gaming PC, while I get the Rosewill Stryker M or Cooler Master Storm Stryker to make a Windows XP gaming PC.
Hi bro I got a very similar setup, same motherboard but a rtx3700 ... but the motherboard is showing me a white error light (vga) and no signal is being sent to the monitor ... could you please help?
My last PC build was 11 years ago using an Abit KV-85 mobo and Sempron CPU. The PC is still working, running Windows XP. it was such a success that I bought the identical mobo and accessories a week later and built a second PC. This is also still running fine, with Windows 7. However, after watching this video I would not feel confident building another PC. Modern, fast PCs are much more complex, with a lot of terminology I'm not conversant with. I really would like a Ryzen 5 PC, but there are not many ready-built ones available in the UK.
@@thesexyskywalker3283 Interesting thought, but not sure about that. My last pc build was 12 years ago, OMG!, and really there are more options both altogether, and per a single build. It’s about 1/2 part selection, 1/2 installation, and 1/2 building the OS and tuning BIOS, OS, Drivers, applications, games, the entire world online, and another 1/2 hardening the build. I failed advanced math many times, but I can 1/2 count!
Great video, you didn’t seem too sure about the ssd… it didn’t make a difference where to put it because x570 supports gen 4 m2 ssd in both slots. But if you had bought a B550 the gen 4 is the closest to the cpu and the other is a gen 3, so if you wanna take advantage of the gen 4 high speeds, you have to know or be lucky. Someone in the comments correct me if I’m wrong :)
Hi, thank you for your content, very informative, just want to ask if you also have a step by step tutorial in setting up Asus Tuf Gaming b550m-plus wifi Mobo? Thank you
Hey Dave! Thanks heaps for this upload, I’m about to build my PC tonight. Your video is heaps clear and your explanations are on point. Can’t wait to build this workhorse!
My computer, custom built not from HP or whatever. Last year I bought the Windows 10 Pro New OEM Disc and installed with it. Now I'm replacing motherboard, CPU, Ram etc. I have been told I can use the same Windows 10 to install after I upgrade the motherboard. Another person told me no you have to buy a CD Key for around $25. I tried to call Microsoft Support and had trouble hearing the person and got nowhere. I think he was having a bad day, so I finally said will look at this more. This is what I bought off of Amazon: Windows 10 Pro OEM 64 Bit DVD English. Also shows on the sleeve "This is not a COA". Not sure what that means.
I finally got in touch with Microsoft and told to install and during activation if I understood right will have option to remove old motherboard and active the new one. Gave me a case number that I can use if there is an issue.
Great video. I just purchased an Asus TUF X570 and an EVGA 500 GD power supply. For the CPU cable, there are two 4-pin connectors. On the mother board there are two CPU Connectors, one is a 4 pin connector, and the other is an 8 pin connector. Do I put the two cables in the 8 pin connection, or do I need to get an adapter cable? Any advice you can give would be greatly appreciated.
I built a pc with x570 plus wifi, and was going to run it without gpu for a while. But I can not get it to boot. Heard from a pc shop that I needed gpu on this motherboard.
I appreciate the walk through. But wasn't quite step by step. You didn't show what the cables looked like, or how they are put in. IE my power supply EVEA supernova has it's cpu plug as two 4 pins. The receptacle on the MB is a 4pin and an 8pin. So I don't know quite how to address that. Do I put the two 4's from the power into the 8, or do I split them up?
Did the case have stock fans on the front? You removed them to mount the liquid cooler on the front? Why not keep them and mount the cooler to the top?
Great video but could use a bit more information about how to set up the front panel. I got my mobo second hand and I've got no manual for it. Also I have 2 power slots for my cpu on the mother board so does it require both the 8 pin and 4 pin slot?
That particular motherboard have a AIO pump conector close to that area you plug and call cpu fan. Did you plug it in a cpu fan or you just call it like that. I’m only asking cause I have the same motherboard and I’m building my first pc ever tomorrow.
I'm replacing my motherboard, CPU AMD Ryzen 7 5700x, Corsair 16gb 2 8s for Ram. Plus, a Samsung M.2 Pro SSD. Will my power supply be adequate. It is a Termalite 650 watt. Also, I have an AMD CPU cooler Fan. Not sure if I should buy a better fan. I checked reviews and it seems some say good and other replaced due to overheating.
If you are using the onboard graphics, you can use this motherboard with any monitor as long as your monitor uses a HDMI or Display Port connector. If you install a graphics card, then you want to connect your monitor to the graphics card and not the motherboard.
My Celcius S24 came with two mounting methods for an AM4 install. One is the way you installed it and the other is with 4 standoffs and screws which require the removal of the brackets on the motherboard surrounding the CPU. I'm confused as to which I should use. Which is better?
Hey there is no issues at all. That is how i am having mine mounted as well. It depends on where you are putting your PC. Just make sure where you are putting your PC will have a lot of clear space on the top so the air can outtake properly. Hope that helps.
Because I'm a broke pos, I've been trying to put mine together since the Fall of 2019...nothing works. Swapped out RAM bc the mb displays the DRAM light. Didn't resolve the issue. I'm about to go Office Space on this thing!
So I’ve had that exact motherboard for awhile now, and got an rtx 3060. I’m curious if it matters which pcie slot I put the card in and if I would have to change something in the bios, because I have always used the pcie slot farthest from the cpu. Does it really matter what pcie i put the gpu in ?
I know this video is old but I had a question about the backside of the gpu when you screw on the back panel if the pins on the back of the motherboard are damaged would it make my pc not boot or say no signal
What does it mean if the lever doesnt close when you put the cpu in? I have the same type of cpu and the lever remains rigid if I attempt to click it in.
How loud is it? Would you say the silence is worth the higher temps? Just wondering since this particular case isn't as known as Fractal Design's or Bequiet's silent cases.
Just built a system with 9 5900x and this MO today. On the box there is a sticker " Ryzen 5000 ready". I also asked the sales guy 3 times. You might find still some leftover old stock in not so frequented shops.
@@gero291 it perfectly works with the mo since ive gotten it built it in august, but about the bios i dont think u needed to do it, i also had the sticker
Just bought the same motherboard for my RYZEN 9 5950x and it won’t post. The CPU ez bug light is on please help!!!! This is my my 2nd pc build and I have been unable to boot for the whole week. I tried rebuilding the pc already and did not find anything out of place.
Some say they received the MOBO with an updated bios for Ryzen 5000 series, and others say they needed an update. I guess it's a mix bag of when the board is built and if the manufacturer started updating the bios already.
Hey I got a question about the wifi antenna of this mono, I connected it and it’s working but does it have to be outside of the case of where does it have to be put?
Your a lifesaver man, I could not figure out the wiring of this thing and you did a great job showing it off.
Clear, proper explanations, no tacky RGB carnival, very well done. Haven't built a Windoze in 15-odd years, would like a proper gaming machine that doesn't look like a tuned car, this was a good kick-off point. Much appreciated! Cheers from Belgium
Thanks mate!
@@DTUnboxed Hey bro, What are the VRM temperatures on Ryzen 9 + TUF B450 motherboard combo you made in this video? Did you take these measurements with a temperature sensor under a moderate load?
You fans on the cooler are set to exhaust not intake
Was about to point that out too.
So how should he have placed them?
Thank you for the awesome tutorial! Good explanations. Good video angles. Good order of operations. You're the best!
nice video! but you are wrong about the fan direction, please correct this as it is misleading to folks that are new to building.
Very detailed that was what I needed thanks 🙏 again
Thanks for the awesome video! I was really surprised to see this pop up on my feed as I'm getting ready to build mine with a lot of the same components you used in yours. I'll be referencing this video once I get all the parts in and start the build. Thanks again and keep up the awesome work!
TY SO MUCH NOW I HAVE MY OWN GAMING PCCCCC
Thanks for video. A bit dated now, but while the parts have changed names and speeds, the concepts are dtill the same, practically.
My last pc build was 12 years ago, OMG!, and really there are more options both altogether, and per a single build. It’s about 1/2 part selection, 1/2 installation, and 1/2 building the OS and tuning BIOS, OS, Drivers, applications, games, the entire world online, and another 1/2 hardening the build. I failed advanced math many times, but I can 1/2 count
Can't see what you're doing at all during cable install
Comung from the future here😅 i have recently paired my 3950x with a 3060ti 8gb and am currently awaiting delivery of this motherboard. I cant wait❤
I'm planning to buy this case to make a MS-DOS/Windows '95 gaming PC, while I get the Rosewill Stryker M or Cooler Master Storm Stryker to make a Windows XP gaming PC.
Can you make a video of what cables goes on the pins for the motherboard I’m building a pc with that motherboard and idk about front panels
InstaBlaster...
Are you the same guy from GuitarZero2Hero? Love your contents!
Best PC build (I subscribed after watching this video)
Same here great video 🤣
Damn you look like the guy from guitarzero2hero .xD😂😂
Never thought i would see you building a PC.
Great 👍 video I’m getting a Ryzen 5900x cpu that would work with that same motherboard right 🤔 I’m getting that same motherboard
Hi bro I got a very similar setup, same motherboard but a rtx3700 ... but the motherboard is showing me a white error light (vga) and no signal is being sent to the monitor ... could you please help?
My last PC build was 11 years ago using an Abit KV-85 mobo and Sempron CPU. The PC is still working, running Windows XP. it was such a success that I bought the identical mobo and accessories a week later and built a second PC. This is also still running fine, with Windows 7.
However, after watching this video I would not feel confident building another PC. Modern, fast PCs are much more complex, with a lot of terminology I'm not conversant with. I really would like a Ryzen 5 PC, but there are not many ready-built ones available in the UK.
Not too hard to build mate. Trust me. You had it harder back then.
@@thesexyskywalker3283 Interesting thought, but not sure about that. My last pc build was 12 years ago, OMG!, and really there are more options both altogether, and per a single build. It’s about 1/2 part selection, 1/2 installation, and 1/2 building the OS and tuning BIOS, OS, Drivers, applications, games, the entire world online, and another 1/2 hardening the build. I failed advanced math many times, but I can 1/2 count!
Awesome video, awesome build :)
You must be so glad you held back on the graphics card, good vid
Haha absolutely!
i have this exact MOBO and i ended up moving my grapics card down so it wasnt blocking the fan at all on the mobo
Great video, you didn’t seem too sure about the ssd… it didn’t make a difference where to put it because x570 supports gen 4 m2 ssd in both slots. But if you had bought a B550 the gen 4 is the closest to the cpu and the other is a gen 3, so if you wanna take advantage of the gen 4 high speeds, you have to know or be lucky. Someone in the comments correct me if I’m wrong :)
You are corrected if wrong 🙃
@@outlawdragons7056 Thank you 🤣
Bro is a guitar hero.. And a pc hero too?
Thank you so much! You’re the best!
Hi, thank you for your content, very informative, just want to ask if you also have a step by step tutorial in setting up Asus Tuf Gaming b550m-plus wifi Mobo? Thank you
This is awesome. Thanks for making this video ❤💯💯
this is my dream build
This a good bulid but I would suggest going with a better graphics card if you can and like cut down on the cpu
Thank You. 🙏
Hey Dave! Thanks heaps for this upload, I’m about to build my PC tonight. Your video is heaps clear and your explanations are on point. Can’t wait to build this workhorse!
Thanks!!! Saludos desde España
gr8 vid, thx.
Wtf this guy taught me how to play fast car by Tracy Chapman when I started guitar and now a pc?????
Is this the same as the x570 with wifi,will this build work the same
You did not put thermal past
Great video however my usb are not being read my keyboard cannot do anything I'll see what I can do
I'm honestly just here to see if I plugged in my fan header right
My computer, custom built not from HP or whatever. Last year I bought the Windows 10 Pro New OEM Disc and installed with it. Now I'm replacing motherboard, CPU, Ram etc. I have been told I can use the same Windows 10 to install after I upgrade the motherboard. Another person told me no you have to buy a CD Key for around $25. I tried to call Microsoft Support and had trouble hearing the person and got nowhere. I think he was having a bad day, so I finally said will look at this more. This is what I bought off of Amazon: Windows 10 Pro OEM 64 Bit DVD English. Also shows on the sleeve "This is not a COA". Not sure what that means.
I finally got in touch with Microsoft and told to install and during activation if I understood right will have option to remove old motherboard and active the new one. Gave me a case number that I can use if there is an issue.
Shoot man I needed to know where the power switch went this video is the closest I’ve been to seeing someone show it :/ manual is no help to me
Great video. I just purchased an Asus TUF X570 and an EVGA 500 GD power supply. For the CPU cable, there are two 4-pin connectors. On the mother board there are two CPU Connectors, one is a 4 pin connector, and the other is an 8 pin connector. Do I put the two cables in the 8 pin connection, or do I need to get an adapter cable? Any advice you can give would be greatly appreciated.
I built a pc with x570 plus wifi, and was going to run it without gpu for a while. But I can not get it to boot. Heard from a pc shop that I needed gpu on this motherboard.
You have a second not used slot m2 with heatsink, on the buttom of the mb, why don't you have installed in?
great video is TUF-GAMING-X570-PLUS can run 2 nvidea rtx3080 ti GPU for GPU rendering or not
Great Video! But, in the case bag that has the screws there is a motherboard stand off. Do I use that?
Using a Phanteks case, this doesn't have all other smalls connectors (the three) aside the one for the PWR_SW x.x
I did this but I don’t get a signal on my monitor, everything powers on
I appreciate the walk through. But wasn't quite step by step. You didn't show what the cables looked like, or how they are put in. IE my power supply EVEA supernova has it's cpu plug as two 4 pins. The receptacle on the MB is a 4pin and an 8pin. So I don't know quite how to address that. Do I put the two 4's from the power into the 8, or do I split them up?
I recently bought this motherboard, I'm having issues, called asus and they had no idea either, cpu light is on.
Did the case have stock fans on the front? You removed them to mount the liquid cooler on the front? Why not keep them and mount the cooler to the top?
Front fans are not included.
Great video but could use a bit more information about how to set up the front panel. I got my mobo second hand and I've got no manual for it. Also I have 2 power slots for my cpu on the mother board so does it require both the 8 pin and 4 pin slot?
You can just use the 8-pin
That particular motherboard have a AIO pump conector close to that area you plug and call cpu fan. Did you plug it in a cpu fan or you just call it like that.
I’m only asking cause I have the same motherboard and I’m building my first pc ever tomorrow.
I'm replacing my motherboard, CPU AMD Ryzen 7 5700x, Corsair 16gb 2 8s for Ram. Plus, a Samsung M.2 Pro SSD. Will my power supply be adequate. It is a Termalite 650 watt. Also, I have an AMD CPU cooler Fan. Not sure if I should buy a better fan. I checked reviews and it seems some say good and other replaced due to overheating.
how was the airflow with this buld? did you run in into any issues?
Dude, where`s the thermal paste ???
buddy, did you plug all the 12 pins in the CPU slot from the power supply or only 8?
Can I use this motherboard for any monitor , or it work with specific monitors please help , thanks
If you are using the onboard graphics, you can use this motherboard with any monitor as long as your monitor uses a HDMI or Display Port connector. If you install a graphics card, then you want to connect your monitor to the graphics card and not the motherboard.
My Celcius S24 came with two mounting methods for an AM4 install. One is the way you installed it and the other is with 4 standoffs and screws which require the removal of the brackets on the motherboard surrounding the CPU. I'm confused as to which I should use. Which is better?
Hey man, did you have to update the bios ?
hello, I noticed that the board has 12pins for the power supply cable. did you only use the 8pin cable on the psu?
Is there anything wrong with top mounting an AIO and having the fans push the air through the top outside the case?
Hey there is no issues at all. That is how i am having mine mounted as well. It depends on where you are putting your PC. Just make sure where you are putting your PC will have a lot of clear space on the top so the air can outtake properly. Hope that helps.
Corsair vengeance pro 3200mhz work with this motherboard and ryzen 9 3900x?
How do I install a 2.5 in. Sata ssd?
Because I'm a broke pos, I've been trying to put mine together since the Fall of 2019...nothing works. Swapped out RAM bc the mb displays the DRAM light. Didn't resolve the issue. I'm about to go Office Space on this thing!
So I’ve had that exact motherboard for awhile now, and got an rtx 3060. I’m curious if it matters which pcie slot I put the card in and if I would have to change something in the bios, because I have always used the pcie slot farthest from the cpu. Does it really matter what pcie i put the gpu in ?
I know this video is old but I had a question about the backside of the gpu when you screw on the back panel if the pins on the back of the motherboard are damaged would it make my pc not boot or say no signal
Does the case have a location to put the commander core?
Wait you're the guitar guy!
Was here
What does it mean if the lever doesnt close when you put the cpu in? I have the same type of cpu and the lever remains rigid if I attempt to click it in.
Honestly RGB is something I don't like either I find it embarrassing personally love this style of build a lot more
Will I have any issues running to M.2 drives?
Whats the max GPU size this case can take?
How loud is it? Would you say the silence is worth the higher temps? Just wondering since this particular case isn't as known as Fractal Design's or Bequiet's silent cases.
I can still hear it - It's not as quiet as an imac for example.
Dont you do acoustic covers 😭
hey pretty useful, just got a question im getting the same motherboard and ryzen 9 5900x do i have to do bios upgrade or no?
Just built a system with 9 5900x and this MO today. On the box there is a sticker " Ryzen 5000 ready". I also asked the sales guy 3 times. You might find still some leftover old stock in not so frequented shops.
@@gero291 it perfectly works with the mo since ive gotten it built it in august, but about the bios i dont think u needed to do it, i also had the sticker
@@gero291 thanks for the reply btw haha
@@tr6gic Better late then never ;-)
Aren’t you the guitar tutorial guy??
u loook like GuitarZero2Hero
It's him bruh, more channel more you know
Just bought the same motherboard for my RYZEN 9 5950x and it won’t post. The CPU ez bug light is on please help!!!! This is my my 2nd pc build and I have been unable to boot for the whole week. I tried rebuilding the pc already and did not find anything out of place.
I swapped out my cpu for my old RYZEN 5 1400 and the same issue occurs
@@djdragons7734 the problem might be the bios. x570 is required to be bios flashed for using 5950x, the second problem- RAM
You forgot the guitar on this one
U don’t need themal paste
Is the m.2 SSD necessary or can I skip that if I have HDDs?
Yeh not necessary :) regular hard drives will be fine
I’m getting the same motherboard with the rtx 3080 and Ryan’s 5 5600x. Anyone know if you need to update the bios or will they work right out the box?
Some say they received the MOBO with an updated bios for Ryzen 5000 series, and others say they needed an update. I guess it's a mix bag of when the board is built and if the manufacturer started updating the bios already.
HEY BRO PENGE
Qué tornillos utilizo para asegurar la placa madre? me vinieron muchos tipos
terrible video , went you are about to conect something ... you cut the video ... dude!!!
:)
Why do u have a 1650😭😭😭😭 and the 970 ssd instead of 980💀
thank you for not clearly showing any of the connections you made or explaining anything in detail!
What about the paste on the cpu?
Hey I got a question about the wifi antenna of this mono, I connected it and it’s working but does it have to be outside of the case of where does it have to be put?