Hi everyone! This Atomstack engraver is awesome. If you’re in the market and looking for one, you can’t go wrong with this machine. Enjoy and I’ll see you all in the next one. 👍🏻
I got my x20 pro a week ago, I just cut the dog and engrave the butterfly and after my charger stop working, I buy a new one, and sometimes my machine turns on and sometimes does not. Anyone can help me with this?
Hey, You complain about laserhead\Glass blocking you from seeing laser when using FRAME function of lightburn .. Have you considered raising laser before framing.. then lowering it for actual Burning?
If you start having a lot of laser reviews, please also show us some laser projects. It makes it more interesting for us who don't know anything about lasers.
I placed an order two days later I got an email that they were out of stock. They offered a more expensive version because as they wrote these are available. I agreed and placed a new order after they returned the money. Two days later I got an email saying that this one is also out of stock! This company is a scam.
You video was super helpful. I'm new to laser cutting and just got the x30 pro.... I could not figure out how far the laser should be from the material or how to use the magnetic focal tool. Thank you! ❤ do you have a link to their recommended settings for various materials?
Great Video and testing, made it look so easy, I have a question, I saw that you had to reach over and under the tracking bar & lazor when at home position, can the home position be made to be say back left instead of front left? ok I pulled the manual for X20 from internet, it says that LB will allow you to change it, but I am not sure I will be using LB, my unit should be here today.
I just got the A20 pro tonight. Two things I had an issue with. 1. Trying to center the laser. It cut my test dog in half. 2. When I tried to use the home button it went forward, said "failed" and then told me to unlock it. Can anyone help? Thanks.
I just bought one of these and fiddled with it some now but how do you go about knowing exactly where the etch is going to be? Say if i want to etch a gunstock i have to know exactly where the etch is going to be
Are you using lightburn? Hold down shift while framing and that will fire the laser and show you the outline. In the newer versions of lightburn you can toggle on the switch in settings to enable that everytime instead of holding shift.
![DDG & G Herbo - Nosey [Official Video]](http://i.ytimg.com/vi/I9Ra0Zc2NlQ/mqdefault.jpg)
Hi everyone! This Atomstack engraver is awesome. If you’re in the market and looking for one, you can’t go wrong with this machine. Enjoy and I’ll see you all in the next one. 👍🏻
Hi
Is it possible to see a preview (on mobile/computer) of targetted working area before pushing start button ?
Yes, you simply hit frame and it will show the outline
I have the A20 pro, for framing, I lift the laser up an inch, and frame, then set the focus after, works great.
Thanks for the tip. I’ll have to try that 👍🏻
I got my x20 pro a week ago, I just cut the dog and engrave the butterfly and after my charger stop working, I buy a new one, and sometimes my machine turns on and sometimes does not. Anyone can help me with this?
Hey, You complain about laserhead\Glass blocking you from seeing laser when using FRAME function of lightburn .. Have you considered raising laser before framing.. then lowering it for actual Burning?
You could mention. What is support like‼️‼️‼️‼️‼️ that is important to me.
I know this request is long after your post, but how long did the devil engrave take. Roughly.
Peel the film off the air assist... Scratches will vanish.
Setting up my atomstack a70 max now. So ready to get started.
If you start having a lot of laser reviews, please also show us some laser projects. It makes it more interesting for us who don't know anything about lasers.
I have a few in the works that I’ll be showing 👍🏻
Great video. I going to buy this machine and your videos helped me a lot. Thanks
Would this be a good first time user option
@@bretsherk depending on what you want to do then yes.
can anyone here share with me the settings for the Atomstack A20 pro to be able to cute through 10mm wood??
How to make a metal doughnut
I take it you saw my other video 😉
I placed an order two days later I got an email that they were out of stock. They offered a more expensive version because as they wrote these are available. I agreed and placed a new order after they returned the money. Two days later I got an email saying that this one is also out of stock! This company is a scam.
Do I need special software to start the engravings or is the machine autonomous?
🤔I know nothing about lasers! but I’m curious does a laser need to be 4 corner level with each other like a 3 d printer to make the laser cut evenly 🤔
No necessarily but it will help. My table isn’t completely level and I haven’t had an issue at all.
@@ArtByAdrock good to know, thank you, this laser seemed better than the other lasers I watch you test out, I’m guessing air assist is the way to go
Yes it is. The air assist definitely helps a lot. I would compare this closely with the Xtool but this one is cheaper in price
What kinda wood is that at 11:00 region there, cuttin straight thru! ?
You video was super helpful. I'm new to laser cutting and just got the x30 pro.... I could not figure out how far the laser should be from the material or how to use the magnetic focal tool. Thank you! ❤
do you have a link to their recommended settings for various materials?
Hello what setting did you use for wood engraving? Im strugling to find best.
Great Video and testing, made it look so easy, I have a question, I saw that you had to reach over and under the tracking bar & lazor when at home position, can the home position be made to be say back left instead of front left? ok I pulled the manual for X20 from internet, it says that LB will allow you to change it, but I am not sure I will be using LB, my unit should be here today.
Hello, this is a great video.Thanks.What parameter mode was used for engraving on tile and what paint was used?
How good is this laser to cut and engrave acryl ?
for stainless arent you supposed to put marker on it to prevent reflect?
Need to get a vacuum exhaust set up on it
I just got the A20 pro tonight. Two things I had an issue with. 1. Trying to center the laser. It cut my test dog in half. 2. When I tried to use the home button it went forward, said "failed" and then told me to unlock it. Can anyone help? Thanks.
Dude you had it for a day 🤦
Maybe read a little more before you start asking people to stop what they're doing to help you.
What’s your power and speed ?
Does it come with any computer software or you have to buy software?
LaserGRBL is free or you can use lightburn which has a 30 day trial. After it’s like $60
Can this do unflat surfaces...like a drinking glass?
Of course but you’ll need the rotary attachment if you want to engrave around it.
How does it do with glass?
Thanks for the video. What software are you using?
I use lightburn
Great Video
I just bought one of these and fiddled with it some now but how do you go about knowing exactly where the etch is going to be? Say if i want to etch a gunstock i have to know exactly where the etch is going to be
Are you using lightburn? Hold down shift while framing and that will fire the laser and show you the outline. In the newer versions of lightburn you can toggle on the switch in settings to enable that everytime instead of holding shift.
@@ArtByAdrock naw im using lasergrbl
What software are you using?
I’m using Lightburn 👍🏻
Are going to do any melting?
Did you watch last weeks video?
@@ArtByAdrock actually no. lol. I’ll look for it.
@@ArtByAdrock wait I did !!! The rings.
Yes the rings. The other melts are on my new channel if you haven’t seen that yet.
@@ArtByAdrock new channel??