⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thanks for the video! Replacement was a breeze. Seems like the filter broke off and my solenoid was stuck in the half open position. After replacing, my engine would accelerate at much lower rpms and generally seems healthier.
Hi, so I changed both intake and exhaust selonoid as well as the camshaft timing sensor and I am still getting the p0014 code. Any ideas as to what I should look at next? Thank you
Change your oil. Continue changing your oil frequently. More frequently than normal. Use high mileage oil. It has oil detergents in it yo help remove sludge. If problem persists it is either the wiring harness, the cam, or the timing chain has jumped and that is the worst case scenario because it can cause internal engine damage.
*Hello, i have a 2012 hyundai genesis 2.0t coupe. I keep getting code P0014. I switched both vvt solenoids, replaced both camshaft position sensors, replaced exaust camshaft gear sprocket, replaced oil, replaced oil filter, i checked harness/wires/ plugs and everything was good, i checked the timing, timing chain, timing tentioner, and timing guides and everything is PERFECT. With only 119k miles the car runs very smooth. No rough idling, no stalling, starts up good and yet still code P0014 keeps coming up. please help, I've been trying to fix this car up. Please reply*
Can this solenoid be the problem of catalytic sensor and speed sensor? That's what Mine has. And I've done all kind of stuff to clear the cat code but no luck
I have the code p0013-14 on my Buick 2013 lacrosse. My car is also rattling in timing belt. But only those codes are popping up as well as check engine light. If I change the parts to fix codes will the rattling stop? Or is it an indicator that my timing belt is bad? And that need to be fixed
I have a equinox 2011 and have de p0014 code camshaf position timing over -advance osystem performance bank 1 I change the oil filter, the oil out new solenoids, new sensor camshaft and de code back any idea
Hey guys, my Chevy Captiva 2011 has the same code P0013. The technician just checked it and has confirmed the inlet camshaft sensor is faulty. I am in Africa (Tanzania)how do i buy these sensors for my car?
2013 equinox - won't start at all. Vvt solenoids replaced spark plugs, ign coils, and TCV...... still nothing. It did run super rough and now nothing. Starter just whines and nothing. Fuel is good and pump is dead on 60.... wtf is going on with this car? 😐
Hi buddy, this same error and solution appears on Mini Cooper S 2011. P0013: "B" Camshaft Position - Actuator circuit Thanks for the class. Keep going. Greatings from Brazil.
Alien Spa Employee: Complimentary psychological detox? Removes all your cognitive toxins, (clears throat) purifies your system. Rick: Oof, this guy on commission or something? Morty: I don’t think. Are you on commission? Alien Spa Employee: We’re not on (gurgle) commission. We get (gurgle) paid by the hour. There’s no incentive really- Rick: (Annoyed) Oh, my god. Okay, listen. W-W-W-We’ll try the machine, but but I’d like you to try something. Try swallowing the giant ball of snot that’s dangling around in the back of your throat. (Throws drink on the ground while getting in the aliens face) It’s disgusting. Nobody wants to hear that. Ahem. Ahem! That’s what you do. - Rest and Ricklaxation - Rick and Morty
This video Borat just replaces the part with no testing of possible other problems... Here's a link for actual diagnostics of the senor. ruclips.net/video/y8i3i3Dxidc/видео.html
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
instaBlaster
Thanks for the video! Replacement was a breeze. Seems like the filter broke off and my solenoid was stuck in the half open position. After replacing, my engine would accelerate at much lower rpms and generally seems healthier.
I had no idea that Borat was a Chevy guy
You could of showed “how” you fixed it...
Which bank did you have to replace..or did you have to replace both of them?
Where's the link for the Chevy Cruze solenoid repair? 🤔
in order for people to understand you better, you need to talk slower. other that that the video was good
Thank you...
Hi, so I changed both intake and exhaust selonoid as well as the camshaft timing sensor and I am still getting the p0014 code. Any ideas as to what I should look at next? Thank you
Same thing here.. did you find the problem
@@hermancane9224 believe it or not I did an oil change and it went off and hasn't come back yet. I have no explanation
@@Saldutti66 old oil could cause the error mate
Change your oil. Continue changing your oil frequently. More frequently than normal. Use high mileage oil. It has oil detergents in it yo help remove sludge. If problem persists it is either the wiring harness, the cam, or the timing chain has jumped and that is the worst case scenario because it can cause internal engine damage.
@@CringeComedyTV my oil is only 250 mikes old though???
*Hello, i have a 2012 hyundai genesis 2.0t coupe. I keep getting code P0014. I switched both vvt solenoids, replaced both camshaft position sensors, replaced exaust camshaft gear sprocket, replaced oil, replaced oil filter, i checked harness/wires/ plugs and everything was good, i checked the timing, timing chain, timing tentioner, and timing guides and everything is PERFECT. With only 119k miles the car runs very smooth. No rough idling, no stalling, starts up good and yet still code P0014 keeps coming up. please help, I've been trying to fix this car up. Please reply*
Will you do a video on fixing issue code p0014 and p0446 please. On a 2018 Chevy Malibu 1.5 L turbo
Their are 2 tho, intake and exsaust, how do i tell whitch one?
Intake is the one near the firewall...exhaust is the one near the front of the vehicle!
Can this solenoid be the problem of catalytic sensor and speed sensor? That's what Mine has. And I've done all kind of stuff to clear the cat code but no luck
But?, any time you erase codes on scanner there will always be no codes? now you must drive a vehicle to see if the codes return.
I have the code p0013-14 on my Buick 2013 lacrosse. My car is also rattling in timing belt. But only those codes are popping up as well as check engine light. If I change the parts to fix codes will the rattling stop? Or is it an indicator that my timing belt is bad? And that need to be fixed
I have a equinox 2011 and have de p0014 code camshaf position timing over -advance osystem performance bank 1
I change the oil filter, the oil out new solenoids, new sensor camshaft and de code back any idea
Thank you.
Good video
I have a 2009 g6 .2.4 ecotec. Starts then immediately dies , if I unplug the intake cam position sensor it will start and run.
Any ideas?
Has po0014
With the racing suite and accent I'm expecting this guy drives a F-1 car to work everyday.
intake crankshaft position not plausible ?? What does it mean p0016
Hey guys, my Chevy Captiva 2011 has the same code P0013. The technician just checked it and has confirmed the inlet camshaft sensor is faulty. I am in Africa (Tanzania)how do i buy these sensors for my car?
I have a question
Where are you guys from
2013 equinox - won't start at all. Vvt solenoids replaced spark plugs, ign coils, and TCV...... still nothing. It did run super rough and now nothing. Starter just whines and nothing. Fuel is good and pump is dead on 60.... wtf is going on with this car? 😐
Hellow sir how are you ....and where are you from
Hi buddy,
this same error and solution appears on Mini Cooper S 2011.
P0013: "B" Camshaft Position - Actuator circuit
Thanks for the class.
Keep going.
Greatings from Brazil.
Were you able to fix it om your mini?
What about P2090?
Holy crap this dude speaks like zoooooooom
he sounds like hes under water lol
Alien Spa Employee: Complimentary psychological detox? Removes all your cognitive toxins, (clears throat) purifies your system.
Rick: Oof, this guy on commission or something?
Morty: I don’t think. Are you on commission?
Alien Spa Employee: We’re not on (gurgle) commission. We get (gurgle) paid by the hour. There’s no incentive really-
Rick: (Annoyed) Oh, my god. Okay, listen. W-W-W-We’ll try the machine, but but I’d like you to try something. Try swallowing the giant ball of snot that’s dangling around in the back of your throat. (Throws drink on the ground while getting in the aliens face) It’s disgusting. Nobody wants to hear that. Ahem. Ahem! That’s what you do.
- Rest and Ricklaxation - Rick and Morty
My car got a code and then turned off after i drove a while on my camaro i did have low oil on it
it's never ever the solinoids, this is a timing chain code, $1800 repair.
Video couldve been more better with you showing how to actually fix it & parts
This video Borat just replaces the part with no testing of possible other problems...
Here's a link for actual diagnostics of the senor.
ruclips.net/video/y8i3i3Dxidc/видео.html
Guys. You keep using that word. I do not think it means what you think it means.
you didnt show HOW to replace the sensor, this video is worthless!
No it's not! Simply unplug, unbolt, slide it out...reverse for install. Any idiot could do it. 😉