Thank you! This is exactly what I was looking for as I need to install the Icon 2.25" leveling spacers on the front of my 2022 tundra SR5. When putting everything back together, is there anything that needs to change with the installation of the spacers? (Will the sway bar still fit, need new control arms, etc?)
The Icon installation instructions for their 2.25 inch coil over lift talks about undoing a lot more of the suspension than this video showed. I would much rather do it your way, but want to be sure that there’s nothing more complicated than dropping the lower control arm to install their coil over. Also, in icons instructions, they state that you need to grind out some of the lower control arm box to make room for the shock?
So you don't have to jack the truck up before doing this? You just donone side at a time?
Thank you! This is exactly what I was looking for as I need to install the Icon 2.25" leveling spacers on the front of my 2022 tundra SR5. When putting everything back together, is there anything that needs to change with the installation of the spacers? (Will the sway bar still fit, need new control arms, etc?)
What is the part called that you are removing on 1:08. The alum piece connecting to ball joint and knuckle. thanks!
The Icon installation instructions for their 2.25 inch coil over lift talks about undoing a lot more of the suspension than this video showed. I would much rather do it your way, but want to be sure that there’s nothing more complicated than dropping the lower control arm to install their coil over. Also, in icons instructions, they state that you need to grind out some of the lower control arm box to make room for the shock?