Dodge Charger - DASH AIR VENT REPLACEMENT / REMOVAL (2011 - 2022)

Video on how to replace / remove / change front dashboard air vents on Dodge Charger sedan. Often the air vents get pushed in too hard and detached. Then if you are lucky air vent just has to be pushed back into its place. If something is cracked, then it will have to be replaced with a new air vent or glued with plastic bonder. ( 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | SE | SXT | 3.6L ).
To replace the air vent you will have to pop out complete center dashboard bezel piece. Before you start lower and pull out the steering wheel. There is no screws holding the center piece. Gently pop it out using plastic trim removal tools. Disconnect all of the electrical connectors plugged into the main dashboard radio screen. Now it is very easy to remove / install air vents. Again there is no screws holding these, only plastic clips. Good luck.
Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@peterrx1883]

just replaced mine.. took me about 10 minutes, thanks for the video 😊

[@QuiteAlright]

You're most welcome. Thanks for watching

[@christinewinkleman6087]

Where can I get that little tool you used?

[@QuiteAlright]

@@christinewinkleman6087 You should be able to get it at any cart part store or auto body supplies store. Cheapest option online. It is called trim removal tool

[@Garylee62]

What if one of the tabs is broken off on the dash board opening that the vent clicks onto?