Stock V6 Ecotec Turbo DYNO time for Kevin! We add BOOST!!!
HTML-код
- Опубликовано: 6 сен 2024
- This Episode of Nugget Garage we put Kevin on the Dyno and add BOOST!!!
Check out how we go as Scott adds boost to our Stock V6 Ecotec Drag car project!!
Instagram: / nuggetgarage
Facebook: / nuggetgarage
Music: www.bensound.c...
Went from watching rob dahm make 1000+rwhp in his 4 rotor awd rx7 to nugget garage making almost half that in a dirty old 6 banger rwd commodore, love it. #strayacunt
Commycruza ....in the days if you drove a rice burner u would get flogged by the flano boys ....obviously we didn’t flog enough good bye holden will miss ya
instablaster
You and me both. Next up CartuneNZ for my daily dose of how to wire my lexus v8!
You guys show that anyone with any budget can build a fast and fun car, a true Nugget.
Im just concern that every bogan in Logan with an Ecotec now has a formula to Turn their Centerlink funded skid pig in to a 379Hp one wheel peeler super skid pig. The streets will never be that same lol.
The cops would love it, within a week all there Kevin's will be sitting in the impound yard, paying them rent with all proceeds going towards the Xmass party. And all Paid for by Barry Bogan and his mates.
Even the most Centrelink funded skid pig has a welded diff. No need to remove the carrier... just blast it off with brake kleen and weld 'er up 😂😂
Full name for Kevin.... 'KEVIN BLOODY WHISTLIN!'🤣🤣🤣
The banter in this episode was next level was in stitches 🤣 keep it up boys Go Kevin!!
Just like the days of coming home in the early hours from a huge night out, watching Rage music clips, 'Just one more'
Miss those days.
So true👍
poor kev, just wants to mang
It was the RTS badge on the dash that was responsible for most of the power.
Love the grunt files sticker in the back ground, 🤙🤙
Kevin is this man just keeps going and going and never wants to give up haha
Isnt it amazing how easy the Autronic is to work with. Absolutely love working with them even to this day.
Thought they where rocking the autronic
I think that snails got no more power left to give.. with a bigger one and revving it to 6k I recon she'd crack the 400hp mark pretty easily... add a few sneaky psi at the track to get the goal sorted 😊🤘
Lol possible
Oooor and just putting this out there just just leave the wastegate pressure hose off... 😁🤘🤔
I was seriously hoping for the 4 hundie.. but 379 will do.. for now. Not bad for a throw-together old donkey.
23:04 wonder how long the plastic dip stick will last.
Mines held with with a spring 😂 blew out on the Dyno... 😅
Three eights are all the rage right now, Scotty from Carnage with the SC L67. Be interesting to see what power he can get in comparison. Good result!
This is all for you Wes! lol
Loved watching all your build series. Hope use are doing well with your latest issues but that's life. We have to take the good with the bad
did you guys have the power button pressed on the shifter ?
Of course mate!
283rwkw is not bad for a completely standard ecotec. If you stuck a cam in with the supporting valve train components you could have made that same power with a lot less boost.
"Just one more"... famous last words
You're supposed to be the best exhaust shop in Qld, and it sounds like THAT!
Well, given the car doesn't so much have an exhaust as a 2 foot mang pipe plumbed straight to the deck, I think they're off the hook.
I dont think thats a full system. It sounds like its just the dump pipe
Kevin Dudd!!!!! What a weapon.
Page up! Page up! Page up!
Great to see you fellas having so much fun modifying crap cars and whooshkiechoochooing them
Leave the nitrous on for the whole run and go out in a blaze of glory 😂
Gee someone spoiled it, was going to comment 442 likes and no dislikes but now 482 likes and 1 dislike.
Had 380 in mind, was doubting myself but Scotty pulled through 👍
Great episode guys, I was expecting about 300 on the dyno.
You blokes did well, was waiting for the bang lol. Nice work!
It actually sounds great like a old same tractor 🚜
Loving your work guys 👍🏻
Yep love the videos boys, keep em coming!
Intro need to keep the mitsu express van
6:35 Because boost is a measurement of the air which did not make it into the cylinder. 😋
Yep. A water pressure washer makes >2000 psi of "boost".
So apparently boat anchors can make some power!
We were running 13 sec cars back in the 60's
Great watching you guys as you can tell your builds actually mean something and are about having fun....secretly e85 and water /meth injection gets installed (its just the button for nos) haha.
Just make me respect the dirty barra even more 😂 reach around turbo and no intercooler living it's best life. Should wack a ebay water to air intercooler on it bigger fuel pump and e 85 tune see what it makes before it dies 👌👌👍
And the Barra was running half the boost & std pump fuel, and made 10 HP less.
Your right mate respect to the Barra, makes you wonder what the Barra could really do
At 15 psi with every pull through the mid range when your making your most torque those rod's will fatigue a little more each time till it throws a leg out of bed .
Geez, anyone who reckons a turbo barra sounds bad needs to listen to this. Kevin sounds like my Kenwood Chef on speed 10! If he could pull 8-9000rpm might be RB territory lol.
Shaun Dunford there’s a guy over here in the states who revs his to 8k in a Monte Carlo. Just look up 3800 series 2 turbo 8000 rpm... sounds pretty mental in comparison to this
You both seem a LOT more relaxed today
Ecotec loves the boost! L67 was great 🙂
Kevos a Sicko 😂
Hahaha
To mang or not to mang.......Barra is the answer.
Watched and liked all the videos. Good job fellas keep going with those nuggets haha
Sounds like a diesels exhaust under water 😂
Kevin 💪🔥
Ole" kevin & Absolute WEAPON IN THE ARSENAL..🔫🔫🔫💥🔥🏇
I thought you where going to do a Scotty,
neutral drop, oops my bad.
NEXT
"Good job Kev, ya dickhead"
So much mang from llama thrusts.
This is great guys, keep em comin
Falcon against Commodore sounds like fun. But couldn't you keep pushing Kevin with V6 till he blows !!! Then put the Falcon Barra into Kevin and repeat the procedure .... Same car , different engine. Be a nice comparison. We once boosted a stock LPI barra and managed 410rwhp on 7psi.....e85 of course.
Man, that thing sounds great!
Is that the same lump we got in the UK for Carltons, Cavs, Omegas or whatever else? Me old man used to come home for breaks in Vauxhall Senator 24v, Vectra V6 etc as well as the Volvo T-5, Mondeo ST24, ST200, WRX - seem to remember a late model V6 Cavalier (he was a motorway cop).
Not as far as I know, these are the older Buick motors as used in Buick, Pontiac etc in the USA market, Not the MV6
Nah they're straight 6s and the vectra v6 is only 2.5L and is absolute rubbish lol the 24v straight 6s go ok though from what I've heard but we don't have them in oz 👍
3 out of 5 ain't bad
Wow just fantastic !!!
380hp from a stock Mang? That's choice!! What's everyone complaining about?
DEATHSTROKE
They do kinda sound like rubbish.
They have been taken to 575hp on standard fuel lines
@@RhysK94 What do the yanks get out of these in Buick GNs?
@@tezzrterry7485 thats a completely different motor, unsure on stock forged over 700 easy
@@tezzrterry7485 buddy Ingersoll was pushing like 2000hp out of a l27 in the 80s you should RUclips that, he backyard built it and twin turbod it and is racing 700+ci pro stock engines.
Always entertaining lads!
Famous last words "what could possibly go wrong"
Kevin making boost for the ewes
That cant be right, don't they make around 400 RWHP NA ? That's what all the P plater's tell me.
Only in the wet
With any of my echos made that much na
Even the apparent better v z Alloytec was only 195 at the engine that's for the SV6
I think I missed an episode how did you do the coil pack setup what video?
As always love ya work lads 👍👍🤙🤙🤙
canny wait to see Donkey run 👍🏻
Good stuff fellas
Kevin survived the Dyno and made ok power, still sounds like shit and head to head with the Falcon could be fun
Needs a cam or different ratio lifters. So limited up high lol
Rockers not lifters sorry
Nice
Awesome. I want
YES! New video!
Up the ecomanga at the price of an Ecotec engine it's a no brainer
That's pretty good.
"What a F-in weapon!"
I like the supercharger on the Ecotec 6,turbo's are expensive
Never heard an eco moo b4
Kev The Rev is Awesome !!! Hopefully ;-]
Great Stuff love watching the Channel!! Do you know the car weight yet? I’m interested to see what a striped out VS is I’m guessing under 3000lbs?
Stock yet it’s got a massive turbo on it yeah right 😂
Go the old Autronic ;)
Mint car!
Did you fellas delete the air conditioning? Also with the reverse plenum did the wiring near the throttle body reach over or did you have to extend the wiring. Cheers
Hello, I have a problem with the 3.8 ecotec engine. When I press the accelerator pedal, a slight gurgling sound appears, and when I lift the fuel, a slight crackling sound then fades and falls significantly. I have been suffering from this problem for a year and a half for the Lumina Model 2000
Sick "executive" dash
Have you looked into the mace engineering plenum spacers?
God I love you guys, so funny XD
Now put the falcon back on and push it alil because you know it will dyno more than that holden brah ha
Very impressive 3.8 a cheap unrated old powerplant !
It's a piece of shit lmao
Bring on the gas
mmmm dunno what the go there is, ive seen much more ghetto turbo setups on eco's pushing into the 400s easily
More than a few running around Victoria with between 430 and 450 wheel safely, quite a few been running around for 4/5 yrs at that level on completely stock engines, just fuel system and boost 👌
Harley Ross this ones probably just a really tired engine
No cam that's why the engine is cam limited
Oh kevin.... your so nuggety.....
Definitely match race go the barra turd!
Take the balance shaft out and let it rev lol
Autronic ftw
Where do I get a turbo for mine ?
get the die grinder and port it... same boost more power
Kerenn teman semangat trs ya
Looks mean in black
How do you guys wire up the ls1 coil in V6 pls
Too bad Kevin’s not a BT1
Then he would be KEVIN BACON 🤯
Dudes can you guys please just do what you do best and JZ that thing and get the show on the road. Lol. Love the show boys.
Winner winner chicken dinner :)>>>
Congrates mate!!!!!
Nugget Garage Thanks very much :)>> And thanks to all the other competitors too :)>>
Em-barra-sing lol poor old ecotec
Can you tell me what I'll need to complete my vy V6 Ecotec I want to turbo it I got the turbo kit an manifolds, piping will it just need a tune
If you have to ask that question, then you shouldn't be trying it.
you guys are fucken mint love it
Where's the G13B goodness?