How to Add Heads Up Display On Older Mercedes
HTML-код
- Опубликовано: 14 июн 2020
- How to add a Heads Up Display (HUD) on your older Mercedes.
Part can be purchased here: amzn.to/3d1eoBH
Check out my book here: amzn.to/3SvoZuT
Appreciate my help? Make a small donation: paypal.me/irepairautos
Support the Channel - get your parts from Amazon (Affiliate)
iCarSoft Mercedes Diagnostic Tool - amzn.to/2MecnHr
Ambient Air Temperature Sensor - amzn.to/3dzw3ks
Car Door LED Logo Projector - amzn.to/2wygWIj
Harness Kit - amzn.to/2zJPCrg
Oil Drip Pan - • Mercedes Oil Drip Pan ...
Air Intake Manifold - • Mercedes Intake Manifo...
Mercedes Diagnostic Tool - amzn.to/2MnmcEf
2006 Mercedes Knock Sensor - amzn.to/3b5Seyw
SLK 230 Rear Brake Rotors - amzn.to/30SKOYM
SLK 230 Front Brake Rotors - amzn.to/2nnckjz
SLK 230 Radio Removal Keys - amzn.to/316zeKT
SLK 230 Radio Replacement - amzn.to/2LClbpH
ml350 2006 fuel pump - amzn.to/2HfIEM1
Fuel Pump Locking Ring Tool - amzn.to/2KDTtcW
High-Temperature Gasket Sealant - amzn.to/2KIhQGw
Power Steering Fluid - amzn.to/2LRYmRF
Mobil 1 Synthetic Oil - amzn.to/2LKpxNZ
Mercedes ML350 Oil Filter - amzn.to/2LLqkOB
Mercedes Transmission Fluid - amzn.to/2K0nR0U
Mercedes Auxillary Battery - amzn.to/2SRm6WE
Mercedes ML350 Fuel Pump - amzn.to/2Krrv3X
Mercedes Fuel Pump Cover Removal Tool - amzn.to/33kJG2G 
Авто/Мото
great video bro
Good job
ur videos I luv becoz, ur informations are accurate within low duration videos..
Nice❤️
Thanks brother! Love your videos. I have a 2002 ML500 with 321,000mi and it’s still a bad azz nice looking ride. My recent issue is BAS/ESP light stays on. Tech say the sensor is bad. Any tips on finding it and installing myself? Thanks.
Hi Keith great video, Thank you. Do you have images how you finished mounting it on the dash board? I have a 2008 ML 350 as well.
Thanks illwills. I'll send a pic
instaBlaster
Will this work in a 2017 GLC ?
how does it work with polarized sunglasses?
What kind of problems do you have with this unit when it is very very bright outside?
I haven't experienced any. It automatically adjusts its brightness to ambient light.
Bro Keith, I have a video of my engine making abnormal noise coming from the cam during cold start in the morning, few seconds after cold start, it makes the noise for few seconds and then stop. I need your expert oppinion. Please through which medium can I share the video with you?
Your hydraulic lifters are draining out at night. How many miles on the engine?
How did you hook up the unit on the SLK? It does not have the rectangular OBDII under the dash but a circular 38 pin connector in the engine compartment. I bought a circular to 16 pin rectangular connection cable from China and a ELM bluetooth code scanner which might work for this but now fear attaching them in case they cause electronics problems with the car's systems.
Im not sure. Chinese products are not guaranteed. Proceed at your own risk.
@@iRepairAutos thanks, but how did you hook it up on the SLK>
Hi bro can we fix this to a 1992 car
Off topic but need help ASAP. I had all front suspension bushes replaced after 100 K miles on my 1999 SLK. Now climate control just puts out hot air, very hot air, even when dials all blue mode. What could he have disconnected or done to cause this?
Possible, Refrigerant leak, possible disconnect of ac compressor.
@@iRepairAutos Thank you. Will check.
Diagnosis was refrigerant low and fuse #15 missing (HOW???) Two hours labor and refigerant recharge. Suspect fuse removal on bushes replacement repair?????
What is this sticker at 2:01 ?
S&Q?
😉
My car is mercedes, problem p0020 code can you answer me thanks
it's "Powertrain" related to the camshaft phasers... low oil pressure on passenger side caused by failed tensioner, right?
What sort of work has been done on this engine???
What engine oil do you run usually w20, w30 or w50?
✌🏾
@@glasser2819 w30 oil change, camshaft position magnet change, only these . burned after these events . thanks
@@glasser2819 What can I do, I would be happy if you help me
@@sergeinkolov3015 what you're going to do to your engine is up to your judgement because you have complete history, mileage and information.
Since you report changing the sensor with no joy, then must be either the solenoid or the phaser unit itself.
See if your engine is affected by blown passenger chain tensioner because this will affect the available camshaft oil pressure.
10W30 oil is a good viscosity or 15w40 if the engine is older to keep up oil pressure with leaky bearings, specially passenger side which is (purposely) designed imbalanced 🙄
I get that with a phone app lol
Which one bro
Bro. Keith this HUD looks nice but beware that it may be slowing down data Xfers on your CAN Buses.
You should scan all the CAN modules to see if HUD upsets them more than they already are before MadeInChina plugins.
👍🏾
Good point. I'll look into that.
That thing looks tacky and cheap as hell. No thanks