Do This Or Your Mercedes Engine May Die!
HTML-код
- Опубликовано: 10 июл 2024
- Quick check on your Mercedes Engine CCV - Crank Case Ventilation system.
Appreciate my help: Make a small donation: paypal.me/irepairautos
Check out my book here: amzn.to/3SvoZuT
Get the parts here and save $$$
ICarSoft Professional Scanner: amzn.to/2iKQnZy
Rearview upgrade here: amzn.to/32SsZOq
Rear Left/Right Sensor: amzn.to/2AogPOU
Front Left/Righ Sensors: amzn.to/2jKecgx
Linkages: amzn.to/2IjHLR8
Front Ball Joints: amzn.to/2IgLw9X
Rear Ball Joints: amzn.to/2Klumsp
ml350 2006 fuel pump - amzn.to/2HfIEM1
Fuel Pump Locking Ring Tool - amzn.to/2KDTtcW
High-Temperature Gasket Sealant - amzn.to/2KIhQGw
Power Steering Fluid - amzn.to/2LRYmRF
Mobil 1 Synthetic Oil - amzn.to/2LKpxNZ
Mercedes ML350 Oil Filter - amzn.to/2LLqkOB
Mercedes Transmission Fluid - amzn.to/2K0nR0U
Mercedes Diagnostic Tool - amzn.to/2MnmcEf
Mercedes Auxillary Battery - amzn.to/2SRm6WE
Mercedes ML350 Fuel Pump - amzn.to/2Krrv3X
Mercedes Fuel Pump Cover Removal Tool - amzn.to/33kJG2G 
Авто/Мото
Thank you so much! I just got back from vacation and the battery for my Mercedes ML 500 is dead, I’m gonna fix my car watching your videos bc youre great! Thank you for your time:)
Thanks for all you knowledge and keep it comming🙏
Precious knowledge man. Great stuff!
Salute Keith. Thx for the information. That's something you never think about.
Hi Keith, I've been enjoying your DIY content now for a few months thank you very much! April of last year I purchased a 2009 SL550 Roadster with 61K miles and I really love the car however 4 months later I had to replace the hydraulic tandem pump ($4.5K repair ouch) but that's okay moving forward. Like you I prefer to be preventative and proactive to minimize large repair bills, that said and since the ex-owner of the car didn't have much service history on the car I'm looking at all I can do to feel confident that the car will last me as long as possible. The car now has 66k miles and I've done all the fluid changes (Engine, transmission & differential oils etc) and because of this video I've ordered the parts to replace the crank case centrifuge and cover the three plugs on the back of the engine and the front right crank case oil separator, a few less thing to worry about. I did run across your video about the typical air intake manifold failure for the M272 & M273 engines and I wanted to ask if you know the MTBF value of the air intake manifold, in your experience when are they failing and since I'm at 66k miles is it something I should be proactive to avoid a road failure?
Thanks, so much for all your informative knowledge on Mercedes vehicles.
That was insane!!! Than you for the heads up.
Wish I new this before changing the engine. Thanks Bro for the knowledge 👍🏿🙏🏿
This is my Mercedes Man !!!!! Learnt a lot from you
Love you and what your doing for us regular driver's that saved for a long time to buy a used MB, and to find out afterwards that you have been ripped off is infuriating. Where I live in New York it can get the seller serious problems to there health if or when they are found out. I know that the guy who did it to me was drinking through a straw for a while and had alot of time to think about doing it again, i got my money back and then some and let's say an unwanted but gratifying bonus. Your a good man and doing a great service for us.
Love ur videos , very blessed with knowledge bro
Thank you for all the information that you provide us... You are a great help...!
Thank you Keith❤️
Thank you so much for all your informative videos! Helped me with a leaking part to my coolant and was able to replace, drain, and refill by watching your videos!! Your amazing!! 🥰❤️
Thanks a lot buddy! 👍🏼
Omg I feel like that’s going to be my bmw ..checking today! This is amazing info Keith. Thank youu!
Good tips 👍🏾
Many thanks really appreciated
Thanks for the ez tips
Thanks man I love ur videos much info
Glad you like them!
Brilliant video x
I am a subscriber of yours, I like your videos, so I am encouraged to make my RUclips channel thanks to you, although I don't have that many followers, I do it with great enthusiasm, thanks
Hello Gentleman, I have been following your all videos in RUclips. Thanks for your time and interest and sharing. I have 2006 E350 and like to change VVT solenoid (not the magnet). Can you please guide me. Or location if the part please. Thanks in advance.
Hey! Thanks for this video, but I am still a bit confused. Will this test prevent anything?
Very informative 👏 👌 👍
I changed the oil recently, and that cap didn't go on correctly. Ended up getting oil all over the exhaust. That was fun. Ended up it was crooked, but it seemed okay, when I put it on. It's good now.
Hi Keith. Have you check the so called egr on that mercedes engine. Also what is the maintenance schedule on that. It's the 2 circular metal color part bank 1 and bank 2. In the front.
I just bought my first MB w204 4matic. Can that v6 you showed be removed topside? Please and thanks!
You have to know, some m112 &m113 gudgeon pins noise sounds like lifter noise , with people flushing and changing lifters when its actually gudgeon pin
❤ love your videos.
Question: I have a 2003 E320 Mercedes with 86k miles. It's currently stuck in winter mode, or what I assume is winter mode. Basically, it's stuck in second gear.
I had been told incorrectly to press the w/s button when it's raining. Which is what I did last week when it was... Any idea how to rectify this issue? Thanks so much!❤
Hello Quintus,got a question got a S430 Mercedes Benz was told byq electrial shop need a computer modular a factory reset is that correct, everything has to go to the dealer expensive ha!!! It want stay crank you can jump it but turn it off as to be jumped again, HELP!!I use you tutorial for everything God bless
This is scary eh? Keith, do you have any videos on how to find a vacuum leak. I have 2006 SLK 350..thks jc
Thanx, do i have a crankcase breather on my slk 200k, R170 ??
My drivers side power side mirror window doesn't lock open, it moves freely, even when it closes, but it won't open unless I physically push t open. Can you do a video on how to replace or remove the side mirror. Also ho much can you get a replacement side mirror for, 2008 ML 350 gas, 6 cylinder.
Hey can you tell how to change 2009 gl450 starter . Thanks
Timing chain broke on a 2006 ml350 w164... it was a bad day
Would you recommend another years engine to upgrade or should I stick with the original
I am considering purchasing a 2015 ML350 but it doesn't have the 6 CD changer my current vehicle has. Is this something something I can add? Thank you Liz
Love you videos. I have a 17 GLE350 4MATIC. Any suggestions on why the windshield and rear window sprayers Stopped Spraying?? The reservoir is full, and the cap is on tightly...
Bruce
Bruce Castells Nice car Bruce... if you can’t hear the washer pumps working have a look at the fuses. For both ft and rr to not work suggests it’s a wiring fault.. get a test light and check the fuses ok. Also get a sewing needle and clean out the washer holes as well in case there blocked. Ya should do that at every service..
Can the brake line on the rear left side of the C320 2001 Be repaired at home
Question, I installed a right side ignition coil on my 92 500sl Mercedes Benz. On the left side of the coil there a bolt an ground strap location . Right side just one bolt. I don't see the location of the ground strap on the left side of the coil. Do I ground it to the positive side coil or the left side bolt. Please help solve.
Hey where can I get the crankcase and send it to mexico i don’t find it here
Is this for just the 6cyl or 8s as well?
i have in my sam rear a error mercedes benz ml320 cdi ( the output of component f4kr(circuit 15r relay has short circuit to ground) and my right brake light and reverse dont turn on any help well be appreciate thanks
Good morning just curious what State are in?
Please help
I have E350 2014 with traction control and engine warning lights on I would like to turn them off as I have an MOT next week
The problem with the car is nox sensor as reading from OBD2 shows
Thanks
Subscribed...
What part do I order
Hi my Mercedes ml350 2006 start turning on the SRS sensor and then stop turning on at all what u think is wrong with it?
Keith, I bought the new hoses, the plugs and the Centrifugal rebreather (Oil Drip Pan/PCV per your other video) a year or two ago from you and went about installing everything on my 2009 ML 350 4matic after dealer told me I had a small leak. The plugs and hoses all went on very easy but I had much difficulty with the centrifugal rebreather apparatus. I just could not get it to seat properly so I could put the cap back on. I checked it very carefully against the old one and looked exactly identical. Tried again and no luck. Is there any trick to getting this to seat properly? I put the old one back on and have periodically rubbed a rag back there with no evidence of oil leaking (and no negative pressure on the oil cap per this video) so have been content to not replace it but I would like to get it done eventually! Thoughts?
Video
I’m having a problem with my c230 I plugged a portable heater up to my cigarette lighter and it blew a fuse and everything started messing up I’ve had to replace the alternator, belt , the sunroof stopped working, the back shade don’t work I’ve replaced some plugs some coil packs and it’s still saying misfire on different cylinders could this be an electrical problem or just a coincidence that all this just messed up
Thanks for making things plain! Question: if the rack and pinion needs replaced, will the power steering feel stiff and possibly make a whining noise?
Whinning noise usually comes from the veins in the power steering pump where you check the power steer oil level which is caused by low oil levels due to a leak somewhere in the hydrolic system. allowing the pump to suck in air and causes the oil to turbulate creating air bubbles in the oil damaging the power steer pump. Because of this yes the steering will feel stiff, and as you turn the whining noise goes up and down. Suggest to replace power steer pump and do an air bleed sequence. [Extreme Caution here. You can damage the pump quickly if you don't yeld to doing the air bleed sequence during the fitment process] Hope this helps. Note: Your rack and pinion should be ok if you have no leaks. MB suggests Power steer oil Q1460001. or an alternative you could use www.walmart.com/ip/Prestone-Full-Synthetic-Power-Steering-Fluid-for-European-Vehicles-12-oz/43155500?wmlspartner=wlpa&adid=22222222227031369925&wl0=&wl1=g&wl2=c&wl3=68571491808&wl4=aud-273067695102:pla-96544866048&wl5=9027577&wl6=&wl7=&wl8=&wl9=pla_multichannel&wl10=8175035&wl11=online&wl12=43155500&wl13=&veh=sem something like that...
Thank you so much!
As a request how about a video on changing a Radiator please 🙏 🙂
Try this Roger. Hope it helps.. ruclips.net/video/5mJ-b310sf0/видео.html
my mercedes-benz Ml500 amg went dead after I run out of gas. I filled it up but won't start. what to do in this situation
Oh God just bought a 2007 for $6500 going to do this test when I get home I hope it ok.
we call that issue engine back pressure in the caribbeaan
06 ml350 engine starts on only bank 2 drivers side, no spark on bank one,... can you please help,..
i have repalced with new parts from md dealer the 2 cam sensors and the 2 magnets on bank one,...
help, help, help,.. thanks
Hi, tks for your videos and the awesome info. I hv my s350 grounded for 2 yrs and now I have lifters noise after oil change. Do you recommend adding lifters noise fix oil ? Cheers
The little ticking sound that is driving everyone insane, especially the owner.
Engines sitting for long periods draining oil out of the lifter into the sump. When the engine fires up, Hydrolic pressure races through to the lifter to make it work. Firstly. get some additives to flush the oil and replace the oil and filter. When you've done that try and see if the tick noise changes. if it does then suggest to maybe look at a slightly thicker oil to take up the slack of the damaged lifter to reduce to tick noise.. You may and usually if the tick noise comes, then lifters need to be changed is the only way... Lifter additives can work but it thickens the oil hense why i suggested look at a thicker oil as a pose to adding additives all the time... Hope it helps.
@@js-amg great, I shall start flushing the oil system first then go for a bit thicker oil and give it a go. Hope it gets better and avoid going through the lifters change drama :-). Many thanks indeed for your help and time..much appreciated
@@ahmedalmulla8212 Ya welcome my friend anytime.. Have a look in the book for recommened oils. eg 0w, 5w, 10w ect. if its recommened as example then go for the 10w and try that. Stay within spec and you should be ok without changing the lifters.. it may take a while for it to calm done but hang in there... All the best...
@@js-amg o'yea, currently using 5w, I'll switch to 10w and run it for sometime then change it again to get rid of any contamination should there be any.
@@ahmedalmulla8212 Now your talking my language!! YES... You've got 2ys of stuff in there hense why it may take a bit to flush out the rust and old deposits ect...
Wow did not now this
Do we reciece answers back
Where's are you located to take my Mercedes Benz gl450 to you
Is this for all Mercedes? If so what’s years? I have 04 cl500. Runs good just want to make sure
Yes. Pretty much lots of models uses this same engine. His ml suv engine is on the 06 07 and even the newer model c class. Same engine same problem same intake manifold , same design.
Hey, what does the part look like and where is it located ???
Check out his other video for the pcv vent cover and oil drip pan. It's located on the left back corner of the engine (passenger side).
Hey Kieth thanks for all your help, I had a situation the other day I have a 06 R350 about 130,00 miles I was sitting in park position about 30min then as I drove off a loud continuous beeping noise was going off and a message read drive to workshop without changing gears so I stop and it wouldn't allow me to put in park so I shut the car off and restarted it and the beeping had stop and message was gone and I was able to Put it in park so I drove it for a couple of days no problem but I don't want to further damage something do you know what could be the issue thanks
Sounds like possible transmission issue. You should have the car scanned. Doki you own the icarsoft scanner?
@@iRepairAutos Thanks!
I am changing my water pump. I removed all 13 bolts but the pump won’t come off. Does anyone know what I should do please in order to take it out?
Fan belt replacement
How can I get you to work on my ML350 2009, it has 150k miles and aI hear a knocking or clicking on the engine. Im in Philly / Philadelphia.
Im in Massachusetts
I'm going to be installing a JEGS air oil seperator in my r170 230.thats be the same as upgrading the air oil oem seperator eh?
Don't see the need there my friend. A costly add on for something that's not needed... JEGS Air Oil Separator is designed for vehicles with positive crankcase ventilation systems. This air oil separator prevents oil blow-by from being displaced into the intake tract on engines where crankcase pressure is high, such as high-RPM applications. In other words. Hi powered engines and race track engines.. Too much and faster oil flow has a damaging effect as well to street cars you know... Not useful for street cars and if the addon hose splits its bye bye engine as it will pump oil out at a rate faster than the oil light coming on saying. Hay man, im running out of oil here... A costly expense for you my friend if you go that way... To answer your question... NO its not an upgrade in anyway but a casino machine rolling around $ signs when it goes horribly wrong..
@@js-amg but its purpose is to separate air / Oil , the fact the engine is high compression doesnt make a difference if the whole purpose is to draw back air from the blowby and through to the intake again. the cycle would continue the same way if not more efficient, as well as negating a poor air/water/oil mixture from drainback? I thought I was onto somthing that would be able to get rid of the ugly OEM one the slk230 has. more wanna put it next to my catch can, but the air/oil seperator is because I dont want to leave it with ONLY a catch can. you see? The Best or Not at all right?
@@Mitutumuch Hey there.. Yeah i get it i really do my friend. But think of it this way... If MB saw a need for it, wouldn't it be there already? I know you've made your decision already about the JEGS and I know that... 35+ years as a master senior tech and i've seen it all before I just want you to be careful and to not spend money after money thats all and not spend money when its really not needed.. I wish you all the best my friend.. Good luck to you..
thank you J S, I'll take your words and expand as much after. Manufacture date is 2000 after all.will look into the a45 models and see how they are doing with it.
Great channel. I'm having a problem with my 2008 ML 350. I turn the key and nothing happens. No engine crank. Battery is good. Can you help?
many things could lead to this. It could be a bad brake pedal sensor, drive authorization may be disabled etc. Do you have a scanner (icarsoft)
@@iRepairAutos No I don't , However when I turn on interior light and try to start car, the light shuts off and does not come back on until I shut it off and turn it on again. COuld it be a bad battery. I don't know how old the battery is, It's an after market battery. Thanks for responding.
@@iRepairAutos It was the battery. I'm going to buy a icarsoft to test alternator.
Hey bud. I have a serious question about my ml. Please if you could contact me and not om youtube? If not it is okay but I need your help brother. Thank you!
Hello Keith, thanks for all the helpful videos.
I have two problems with my 2006 ML 350 w164. First, the engine starts with a lot of difficulty - when I turn the key, I have to depress the accelerator and step on it repeatedly before the engine starts. Second, as soon as I change gear to "DRIVE " or ""REVERSE", the engine stalls (shuts down).
Any advice on how to fix these? Kindly help.
Thanks
Hi Henry... MMM doesn't sound too good does it... Ok well the first thing is to check the TPS sensor and the throttle body. When you depress the throttle your telling the PCM the ohms resistance in the TPS has changed to make it start which could suggest an incorrect reading with the TPS. ENGINE OFF Check all the throttle body is clean there, and disconnect the harness at the throttle body and clean it out with contact cleaner and allow to dry out.. check the wiring harness for any signs of damage. Also check the air filters and have a look at the fuel filter as well as they can give the impression of a bad sensor as well and if that fuel filter / air filter is blocked then it can give the similar situation your having... Sometimes depending on where you live in the world, rats and mice can get in the engine bay and chew the wiring harness on the car as the car is dark and warm.. So have a look at the harness all over as well.. The main thing is the car is able to start which is a good thing, but it doesn't start as it should... Its pointing towards a sensor or wiring issue there.. If you can get your hands on a scan tool that would help you and it would give you an area to have a look at and use the live data as you crank the car... Give those things a go. Hope it helps...
@@js-amg Thanks J S. Your response is highly appreciated. Your approach is holistic and sounds great.
First, you said : "Sometimes depending on where you live in the world, rats and mice can get in the engine bay and chew the wiring harness on the car as the car is dark and warm.. So have a look at the harness all over as well".
What "harness" are you referring to here? Same "throttle body" harness or some other?
Second, when I take my feet of the throttle, in "park position", the engine does not stay running while idle. The engine rather stalls and goes off. What could be the reason for this?
Third, could these problems be caused by a faulty or bad Brain Box ( the main computer situated on top of the engine)?
Kindly help.
Thanks again.
HENRY OKWUKAMMA Hi Henry.. Sorry check all the wiring harness all in and around the engine bay for suspect damages by rodents ect..
HENRY OKWUKAMMA Hey Henry. Yeah with the idle nearly stalling that could be a resistance fault to the TPS sensor. But do check the air filter and fuel filter for flow restrictions ect. A low fuel pressure could give a similar issues of stalling ya know... its similar to applying the choke on the old carby cars which did in fact stall and fart ect when it was hot cause people forgot to push the choke off... give it a go and see how ya go.. Cheers Henry..
Henry no I wouldn’t crucify the pcm on the top of the motor.. It’s running ok just not idling well.. usually but not always the first tell tail sign of the top engine PCM is the cooler fan will kick on and won’t turn off even with ENGINE OFF KEY IN HAND. unless ya pull the relay.. That would be an expensive exercise and the PCM would need to be cloned / copied to a new PCM..
What does it mean when every light come on and off while driving.. like every light.. battery, temperature, exc.. and it jerks while driving and slowing down.. on 2009 E350
Usually that means the serpentine belt is gone. Please tell me more. All components usually don't fall all at once like that. Did you scan the vehicle? When you pull over and turn the engine off and back on does it start?
Possible bad earth, dead cell in the battery, if you can’t see any physical signs of issues in the engine bay use a multi meter and check volts at the alt and battery... possible a wiring harness connector fault would give a similar issue.. wiring harness short is also an issue. The exciter diodes in the alternator can cause dash lights to come on all over the place hence why I suggested check the alt volts.
When I turn it off and on it cranks right back up without a problem.. and it’s not my belt I just put new one on.. my car ran hot because my upper radiator hose popped off on eway going around 75mph I couldn’t put it back on because the rubber oval that helps keep it in place broke and got lost.. it’s like it jerks when pulling off but jerks really bad makes ERK sound when slowing down almost like stopping on a dime
Dream_Chaser 901 Ok well I didn’t believe it was a belt... have a look at the throttle body to make sure it’s clean. Also check the connector that plugs in to the TPS sensor. Spray some contact cleaner in the plug to clean it out and let it evaporate to dry out. Whilst the car is running wiggle the connector and see if that makes a difference. It seams an intermittent electrical fault to me that’s causing it to make and break a circuit under load and usually that points to plugs or coil pack whilst under load. Make sure you check the volts at the alt and battery with a multi meter. You must do that ok. A low volt will give a false sensor or component that’s at fault. Anything over say 14.1 volt ya cheering and we can dig elsewhere. Also if it ran hot then how hot, and is it possible you’ve cracked a cyl head.. engine compression test and radiator pressure test to confirm ok.. I’m not saying it is but keep it in the back of ya mind.
Wizard!!!!
Hey Prof, nice work on the Vids.
I wonder if I could pick your Brain, about a prob. I am having with my Mercedes Benz B200t Radio. The Antenna mast for this car is located on the roof and at the rear of the car.
When I turn on the Radio, I only get a couple of stations and a lot of static.
So I took the ceiling off, at the rear and located the Mast. It has a circuit board at the base with two wires connected to the it. One Blue, which was connected to a wire going to the front of the car and the Radio I presume. The other wire, a Red plug, which was soldered to another part the circuit board was just left hanging and not connected to anything. It looked kind of new, like a spare.
Would you happen to know what the reason for the static and bad reception is? Does this Red plug need to be connected somewhere?
I tried to isolate the Mast from the body of the car, in case it was grounding out, but it did not improve. Do you know if there is an Antenna amplifier involved?
I would appreciate any help you could give me.
Thanks, and stay awesome man.
Do diesels have this problem also ??
Leo Davis read my comments my friend. Don’t stress ok..
Hi - Would like to email you an issue I have my W163 - how can I do that? thanks
Send me a message on my facebook page
@@iRepairAutos Hi Thanks again. I am not on Facebook though on Twitter. Will that work
Thanks again for your help and message.
and whit diesel, too?
Yes diesels have too but more known as PCC valve. [ Positive Crank Case],
Great Chanel!! I have a question. I was driving a 2013 Mercedes ML63 and it was raining very heavy. After I drove down a street with about 10-15 inches of water and now the car is stalling and sputtering. It can start, but loses power after a few minutes. The water never got inside the vehicle and it was for no more that 20-30 seconds... but I don’t want to keep trying to drive it. Any suggestions?
2006 E350 turns off
Out of the blue ?. It turns back on
I never got my part that I ordered from yall no tracker number or nun I emailed yall and no reply
I'm sorry about that. What is your email address?
I ordered a part from him about a month ago. I still have not received the part and he doesn't respond to my emails. Got burned for maybe $40. Some bs
Hey Keith, I have a two part question about my 2010 E550; #1 is there anything that we can do to save our engines from this? #2 the oil separator on the driver side, there's a whistle sound coming from that hose leading to the mass air but when I detach the hose from the driver side oil separator although the engine idle roughly the whistle noise stops, I put my thumb over the hose to simulate it being plugged back into the (driver side) oil separator and there's that whistling noise again, so my question is could this mean that the driver side oil separator need replaced?
Yes, also check that hose is plugged into as that seems to be plugged as well.
Thanks a million Keith...
Good morning, Keith, quick question, could you give me some insight on why my 2010 E550 idle is fluctuating on its on after warming up while parked? it'll start to idle high until i give it a good revving and then it settles.
Can we PM or speak. I have a situation that I hope you may be able to assist me with. RSVP
please message me on my facebook channel: facebook.com/irepairautos/
Why don’t u show us the fix after we check
It's in his other videos.
Hi there - i have 2007'ML350- 4Matic - check engine light on for few days after light is off , so i checked with Auto Link scanner Car diagnostic code reader showing codes - P2006 $07E8 Generic (Intake manifold runner control stuck closed Bank 1a ) and other code showing with P0015 $07E8 Generic (B Camshaft position Timing over -Retarded Bank 1) - Please tell me how i can fix these code issues from my end - thanks in advance ~ Jeeva
Sounds like you have a intake manifold issue.
You can check the obvious, the front black circular, should have 3 of them. Follow the plastic rod, it will be connected to a triangle. See if those moves and if anything is broken there.
Is there oil residue build up in this area that is encase with dirt?
Check throttle body, is there oil residues.
If any of those is yes.
Then you have a intake manifold project on your hands.
Go check out his intake manifold replace video to show you all the related parts.
Holly molly.. that rebreather is clogged as though that part is a 1 way check valve. Which japanese cars has that piece and usually either stuck open or like your video stuck closed.
Good thing the mercedes part doesn't gets blocked at all. Heh, probably that is the problem... Now all the oil fumes goes into the intake manifold.
Bro i love my Mercedes so much I'm scared to drive it....lol
Heh... I know exactly where you're coming from
@@_Solaris facts bro especially when its out of warranty
@@_Solaris facts bro especially when its out of warranty
Well, unfortunately, it's going to happen sooner or later. It's how it's design. Until mercedes figure out a way to prevent oil fumes routed back through the intake manifold. An oil catch can comes in mind, but it still routes back to the intake manifold, hence just delaying what's to come. The idea of having it not connected was also discuss, but it will cause air pollution and also the engine will end up showing an error. So another words, we are stuck with it as it is how it's designed.
Ugh! Neggy Nancy! I'm going to enjoy both of my Benz. My first one was my first Auto purchase ever-10 years ago..And this newest one, my G-ride, I recently bought for my birthday 🎉🎂🎁!!😁
The M272 engine will die eventually, for some other mechanical issue anyway
Everything dies at some point I guess. Im pushing close to 300k miles on my engine.
Why do you say that? Seems like a solid engine to me.
Technically, it's a pretty strong engine. Just the little known hickups. If you ensure proper maintenance, then you can prevent the bigger issues.
The intake manifold is a plague to a long line of mercedes models. As this part seems to be incorporated to the majority of their engines. Then you have a few models that have a sprocket issue, a certain models that has the 7speed transmission related to the conductor plate and the trans bell issue, oil leaks from the pcv vent cover, oil leaks from the cam plugs, sensitive coolant / heat issues. Aside from that, it's pretty much strong. Also, the above items can be prevented if you keep up with the maintenances.
You
2006 c230 mercedes have lights on bright no horn no front signal lights on no windshield wipers got car pro and this what the codes. Etc the supply voltage of control unit n2 13 w as weight sensing system is to low. Voltage supply of sensor m12bl hall sensor 1 m12b2 hall sensor 2 short circuit or open circuit. B1od6 fault in can commuiction with control unit sam f. B1001 under voltage supply etc status.9020 fault in can commuiction with control unit n73le1s control unit.9101 fault in can commuiction with control unit n475 esp dps pm and bas control unit. Please help me
Hey Joy... Ok it suggest theres possible issues with communication there with sensor going off and horn, front signal lights not working... I'd have a look at all the fuses to start with using a test light IGNITION ON. Check all the connection that plug into the fueses at the back and just make sure your happy that everything is solid and connected there... Use contact cleaner to clean the conector plugs behind the fuses as there could be corrosion there.. With scan tools at times one sensor can cause other sensors to say its a fault.. Eg. LHF AND RHF seat belt pretensioner open circuit... When you replace the LHF the RHF works and doesn't show a fault you get what i mean? Scan tool a great, but they can lie to you so dont always take it a gospel unless ya really positive. There are a great guide and they will usually help you narrow things down.... I hope it helps...
@@js-amg ok I will do the test light thank you for responding
Light test. Back 1thru 20 .10 40 fuse out.heated rear window. 21 thru 42 all work. 43 thru 65 . 52 20a start enable out. 51 7.5a air conditioner s e.50 5a switch illumination out.49 7.5a air bags side airbag control unit out. 48 15a engine electronics out.54 15a engine electronics out. 53 2.5a.engine electronics out.55 7.5a electronic stability program out
65 40a teleaid sensor. Telephone system sensor out. 56 electronic stability program out. What can I do now . Thank you for helping me.
Joy Carter Hi Joy... Forgive me are you saying you have blown fuses when you say [out]? If that’s the case and I take it when you checked the fuses you had the IGNITION ON fully just before the initial start... Then replace the fuses 1 at a times... If your still blowing fuses, then You’ve got a short somewhere connected to that circuit, and you’d need to hunt down a wiring diagram for that.
Test light no light
Dude, need u in my family. I have a sister, her name is Blessing, she is 5ft, 375lbs, & has 8 kids, from 8 men, & is unmarried, but she makes a good Mac n cheese. We have 8MB’s in the family, so if u marry Blessing, we will all be happy!🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
Wtf lmfao
😂
I ordered a part from you an still waiting for it. Might be like 3-4 weeks by now. Starting to think you burned me for my money
Well, you be happy it's just this part and not the intake manifold. It will burn a hole in your wallet to fix that.
Dang I fallow you and you're great but please fix your microfons/audio sounds... Almost bkew my ear drums with your comercial sound... Gosh... Keep all souns close to same level... Please.
You’re dragging it out get to the point
Mercedes are garbage , What a bad design this car is。
Hello Gentleman, I have been following your all videos in RUclips. Thanks for your time and interest and sharing. I have 2006 E350 and like to change VVT solenoid (not the magnet). Can you please guide me. Or location if the part please. Thanks in advance.