How to Reset & Recalibrate Whirlpool Washer (30 Sec. Recalibration) 
HTML-код
- Опубликовано: 29 июн 2024
- How to do a whirlpool washer, recalibration & reset.
Even though this is usually known as a whirlpool reset whirlpool owns a lot of different brands that have the exact same way to re-calibrate and reset. These brands include Maytag Amana, Roper, Crosley, estate, and many more. 
If your washer seems to be stuck or locked up, you may need to re-calibrate. You should also do recalibration if you have replaced any parts. Resetting all the components of a washer is very easy to do with this step-by-step how to video.
If you have recently replace the actuator, control board, lid lock, suspension rods, splutch it’s always a good idea to do a recalibration. After all, it’s free and easy to do.
I recently discovered you can unplug a washer while it is in the middle of a cycle and lock up the control board, causing one LED light to flash on sensing or Fill or lock.
The only way I could find to fix it was to re-calibrate. 
00:00 Whirlpool Recalibration Introduction
00:20 How to Recalibrate
00:33 Turn to Rinse to Reset 
Хобби
This helped me out! Thanks!
It worked. Thanks for sharing!
Glad to help
It worked! Thanks for the video
Glad to help
Thank you so much! This is exactly the information I needed. You totally saved me!!
Glad to help
It worked!!! Thank you so much!
Glad to help
Your channel has been a great inspiration! I work in the oil and gas industry but my wife and I started a side business flipping washers/dryers ! We give a 30 day warranty and so far we have had zero complaints! Can you make a vid giving us some stories of what to expect from customers and steps of how you fixed some of the issues (if you had any ) but basically just wanna know what to expect from the people if something breaks down within 30 days
Number one piece of advice I can give you is joining the Facebook group “ appliance refurbish, and repair” I wish they were around when I was getting started off. Amazing guys in there.
Whenever I had an issue with an appliance, I sold on a 30 day warranty most of the time it was user error, hooking it up or using it. Or a stopped up vent pipe for dryers or clogged up drain line for Washer. I change my 30 day warranty to a 30 day exchange warranty. I would never give money back, but I would bring a similar washer out to them if something went wrong.
I did have a few people just get buyers remorse and return an appliance to me when they found a cheaper deal a few weeks later.
A good rule of thumb is if you meet them and they seem like complainers don’t sell them anything those are the worst people for lying about every little problem they have and they’ll drive you crazy in the end. It’s just best to avoid them there’s not many of them compared to good customers.
Be sure to chech out my playlist I’m getting into the appliance flipping business.
@@WasherDryerMoney awesome advice !!
Thank you
Glad to help
I took the steps to reset and recalibrate, but my washer is still stuck in sensing mode . . .
Any luck I have exact issue as you
Same. Simple washers lasted 20+ years back in the day. My Whirlpool is only 3 yrs old and now stuck in sensor or it takes 20 minutes to fill and goes to wash and stops. I tried recalibration, but non of the lights come on unless I start it and I'm back to square one.
@@pinkfreud62 found my issue it was the water pump, the thin metal that connects the blade snapped
Thank you for your video！
Thanks for watching!
My mother’s washer is stuck on “Sensing” after tripping the breaker. Any ideas PLEASE??
I have a roper that I am obsessed with repairing. it fills agitates drains fills again agitates and drains and stops there. Clothes are still wet. I tried to calibrate but I reached the light flashing lights process but when I turned to rinse to calibrate I pushed start button and the lights went out and nothing happened. ANY IDEA?
My washer actually knocked off the circuit breaker.. so once I clicked the breaker the washer lit back up. That was weird but thanks for this information about needing to recalibrate after a repair.
That is weird. If it doesn’t do it again, it could just be a coincidence. If it does it again it could be a short somewhere. Fingers crossed.
@@WasherDryerMoney thanks for that.. It seemed to be a One Time weird happening. I appreciate your suggestions.
Please,help.
My Kenmore800 top load washer will go into wash mode(on any of the cycles). It does work on every Spin mode cycles. But won’t start the Wash cycles. Is there any repair/replacement you could recommend?
Put it in diagnostics mode. You’ll find some good videos on that but I have not made one yet.
Some of the washers that I calibrate won’t calibrate. I put it on the “rinse led “ and press start and it will click and flicker out . Can you share some advise . Been really lucky and haven’t had to work on any control boards yet. .
Not sure. Definitely give the old unplug it and plug it back in trick a try.
Be sure to join the Appliance Repair group on Facebook. Those guys have all the answers.
Greetings, your video worked for me in a certain way, but the lid lock light still came back on when I opened the door and he closed it, he still doesn't want to do anything, he stayed in lock and nothing else, can you tell me more or less that you understand, thanks for help 🙏🏻🙏🏻🙏🏻
Could be a bad door lock. I don’t have a video on it yet, but you can run it through a diagnostics mode to check.
I did this but only the rinse light turns on… it will start rinse cycle and drain but will not move past that. It’s only 1.5yrs old 😢
Hello I'm new to appliance flipping
And I wanted to know if buying parts like thermal fuses and what not on Amazon is ok?? And will they last??
They are usually fine. Be sure to check the most recent reviews to make sure they’re not fake reviews on Amazon.
sometimes thermal fuses will get bad reviews because people do not understand they have to clean out the lint or whatever is causing the airflow restriction. So they will leave a bad review saying that fuse went out after they replaced it. It’s not the fuses fault.
The fuse going bad is the symptom not the problem.
@@WasherDryerMoney right thx
I do this and it immediately flicks on and then does nothing. I tested this on another machine and it works fine. Any idea why this one would do that? If it helps the reason there is an issue is the lid switch light was stuck on. Replaced lid switch still having issues
Hey did you ever figure this out? I'm having the exact same issue
@@michaellundgren9534 The board is bad. I swapped in that used one and it worked fine. just an issue with it unfortunletly. a good test is is to manually test the door switch. If it doesnt work when you do that, then replace the board. Once in diagnostics, you turn the knob to one of the settings (cant remember which) and it will switch the lid on and off. Thats when I new the board was bad it wouldnt do it on the faulty one at all. good one would switch on and off.
Does the washer have to be empty in order to recalibrate?
I don’t think so but I’ve never tried to with water and clothes in it. Is your washer stuck with water in it?
And it gets stuck on the rinse cycle and the light and off
My guess would be one of the water Valves is not working probably the cold valve or the actuator has gone bad.
Harder to know without being in front of the machine, but that’s probably a good place to start testing.
Rinse ligjt still blinking😮
Put it through automatic or manual test mode. I’ve not made a video on that but there are several good ones out there.
my wash light is stuck so wont work
That’s strange. You’ve tried unplugging it for a few minutes?
I tried doing that but it turned on right away
That’s weird
Could you or anyone on here help us out and sale us about 10 or 15 broken washers to help us get started . We got about 15 right now and it’s going great but there getting harder to find . I will pay $40 each for some complete broken ones and we have a big trailer !
Make sure to join the Facebook group, (Appliance Wholesale Buy and Sell)
Hope that helps.
@@WasherDryerMoney thank you ! And if you ever have too many setting around don’t forget about me ! We wanna take a small road trip and find some soon ‘ my girlfriend loves to look for them lol
I did it but it didn't work
You should try to run it through a diagnostic test. It’s probably the actuator.
Hello? Anyone home?..
I’m home.
Went for 20 seconds and stopped… hope that was long enough
Dude your video is so so so small and I can't even zoom for some reason
That’s weird I’m not sure why.