Wow! You have really packed so many resources into your presentations. Thank you for including resources outside of your own channel that can be helpful.
Hi Fred, I am glad to help. Let me also know if you have good tips'n'trick - I am always looking to learn. There are so many good ideas out there. Enjoy ;-)
Hi Piotr, There are several ways of doing this. I will give a couple of examples below with as small a distance as possible. On a straight section you can use some small curves to ease one track closer to the other. As an example if you use 24206 you would use 24206 (turn left or right), 24094, 24206 (turn opposite to the first 24206). However, when doing this it is not possible to make some straight for the parallel track that has same length. One solution is: - Track 1: 24206 (left/right), 24094, 24206 (opposite direction), 24077 - Track 2: 24188, 24071 In a curve you can ease one track closer to another by making the outer track curve tighter as you go through the curve. If you want to make it fit in a 1/4 circle (90 degrees) with 24130 (R1) in the inner curve you can do the following: - Inner: 24130, 24130, 24130, 24094 - Outer: 24230, 24215, 24207, 24130, 24107, 24064, 24064 This is not a perfect fit, but will work. Hope this helps! Enjoy ;-)
Hej BO så dejligt at du ville svare mig vedrørende mit problem med at mine CS3 kun meget langsomt kunne starte op. Problemet er løst idet jeg opdaterede til version 2.5.2(6). Nu er alle tre cs3 hurtige til at starte op. Fejlen opstod sandsynligvis ved opdateringen til ver. 2.5.2 december 2023. Jeg har benyttet mig rigtig meget af dine videoer. Jeg og en togven har lavet en ret omfattende automatisering af 5 lokomotiver der køre mellem tre stationer. Vi benytter os meget af din måde med lamper og omskiftere. Vi benytter også random macro som du benytter i video 7. (dog ikke loop).
Hejsa Niels, herligt at du fik det til at virke. syntes det er lidt mystisk at det blev hurtigere da du opdaterede - med herligt det virkede... Lyder som om i har det sjovt med events og automatisering. Hvis i har nogle gode tips - lad mig endelig høre. Hygge ;-) Bo
Thank you so much for your always interesting and very pedagogical videos. Mgr Jean Pierre
Hi Jean Pierre, My pleasure! Enjoy ;-)
Wow! You have really packed so many resources into your presentations. Thank you for including resources outside of your own channel that can be helpful.
Hi Fred, I am glad to help. Let me also know if you have good tips'n'trick - I am always looking to learn. There are so many good ideas out there. Enjoy ;-)
Hi, can someone tell me how to move from 77,5mm track spacing in the station area to 64,3mm spacing on the main line. Thanks
Hi Piotr,
There are several ways of doing this. I will give a couple of examples below with as small a distance as possible.
On a straight section you can use some small curves to ease one track closer to the other. As an example if you use 24206 you would use 24206 (turn left or right), 24094, 24206 (turn opposite to the first 24206). However, when doing this it is not possible to make some straight for the parallel track that has same length. One solution is:
- Track 1: 24206 (left/right), 24094, 24206 (opposite direction), 24077
- Track 2: 24188, 24071
In a curve you can ease one track closer to another by making the outer track curve tighter as you go through the curve. If you want to make it fit in a 1/4 circle (90 degrees) with 24130 (R1) in the inner curve you can do the following:
- Inner: 24130, 24130, 24130, 24094
- Outer: 24230, 24215, 24207, 24130, 24107, 24064, 24064
This is not a perfect fit, but will work.
Hope this helps! Enjoy ;-)
Hej BO så dejligt at du ville svare mig vedrørende mit problem med at mine CS3 kun meget langsomt kunne starte op. Problemet er løst idet jeg opdaterede til version 2.5.2(6). Nu er alle tre cs3 hurtige til at starte op. Fejlen opstod sandsynligvis ved opdateringen til ver. 2.5.2 december 2023. Jeg har benyttet mig rigtig meget af dine videoer. Jeg og en togven har lavet en ret omfattende automatisering af 5 lokomotiver der køre mellem tre stationer. Vi benytter os meget af din måde med lamper og omskiftere. Vi benytter også random macro som du benytter i video 7. (dog ikke loop).
Hejsa Niels, herligt at du fik det til at virke. syntes det er lidt mystisk at det blev hurtigere da du opdaterede - med herligt det virkede... Lyder som om i har det sjovt med events og automatisering. Hvis i har nogle gode tips - lad mig endelig høre. Hygge ;-) Bo