You uploaded this TWO years ago, I just wanted to say I have watched you like you're Dom Toretto. I'm currently at the 1:25:47 mark. Just thought you deserve a MASSIVE thank you and well done. This truly is an absolute brilliant video. The fact it's 2:15:16 in total, the extra time it must have taken to fuss around with the cameras and some of the lighting. Just wanted to give you a big shout out from England, UK from a new MX5 ND owner, who is now going to subscribe. Brilliant, just brilliant!
Thorough clutch job. Really took time to explain the details which many will not do. Also why to put the grease where you did & not in others. Nice to have all those tools helping to do it right. Awesome Jonathan ! 😎
Great video. Thanks for taking the time to show every step! Just replaced my transmission...... with a lift. I would not want to have done it without the lift. Alos thanks for calling out the torque specs when doing the reinstall.
Just subbed for this content. Not cutting the install short and showing the entire process. Please post more ND or NC content if you get them in shop. Not too many people doing it as clear as this!❤
All that trouble just to replace the clutch? I'd better be kind to my clutch! 🤣 Headband flashlight would have come in handy while filming. You remind me of my brother who is also a mechanic. Great job! Good luck.
Nice! From all the videos about clutch replacement this is the cleanest! Do you thing an automatic RF could be swapped with a manual transmission without pain? Its just a curiosity. I recently bought mi first Miata, a ND 2019 in México. The passenger airbags lights are not showing, so just dissasembled the indicator and I found no leds are installed. First project is to install those leds or replace the board. But I cannot find schematics or anything usefull. Can you point me where can I find Miata schematics, please?
I have the exact same car and year, but bought it new (leftover model year) during the outbreak of the pandemic in April, 2020, and now has over 15,000 miles only due to the pandemic, work from home or retired, and just a weekend car! 🙂
Great video, thanks for explaining in detail. Replaced my flywheel and clutch recently, (not DIY though) my mechanic didn't use torque wrench with specific torques that I told him according to your video, to tighten flywheel and clutch plate. Should this be a concern? Could this damage new flywheel or clutch?
Thank you for the great video. In retrospect, do you think you needed to remove the manifold or could you just have loosened the exhaust at the manifold joint?
What's the ballpark cost for the clutch replacement you charge your customers? just bought a 2019 and it seems it needs a new throw out bearing so might as well get the clutch done too. Previous owned must've hooned it a lot.
Thanks a TON for the video! One question: I didn't see you align the PPF??? The FSM shows there is a measurement from the underside chassis brasses to the PPF.
Hi Benjamin, glad the video was helpful! During this repair the nuts that fasten the brace to the transmission left a blemish where there were previously installed. I simply matched the position where the nuts were previously installed upon assembly. It is also not adjustable where the brace mounts to the rear differential. At approximately 1:40:00 into the video, you can see that I verify the position of the nuts prior to tightening them down.
I’ve done it on two transmissions and trust me you’ll hear it lol. The clutch will go in and out fine but when you try to change gears you will feel the bits locking up random gears it is very easy to tell
Great video! Does anyone know how i can remove the clutch release bearing sleeve that the bearing sits on? trying to replace my version 1 with a version 5 and the website i bought from tells me i need to swap them out for it to work in my ND1
I have a 2016 mx5 that rattles a bit slowing down at around 2500 rpm. Sound goes away when clutch is pressed. Do you happen to know what can cause that?
Do you need to change the spigot bearing when you change the clutch kit, my mazda has difficulty engaging 1st and reverse gears sometimes other gears .
Next time you do one again take of the two motor mount bolts jack up to engine push engine to the left remove the exhaust manifold it will make it easier to drop and when you are under about to take it out use your pole jack with a peace of wood and jack it up a few inches witch will make it easier to turn the transmission and drop it
Can anybody help me? I tooked my ND to it's clutch replacement, but now everytime that i shift from 1st to 2nd gear @5,000/6,000 rpm, it makes s clap just underneth the arms rest, it's a metallic loud clap, i'm concerned and the mechanics saids everything it's fine, it has been checked 3 times now and the sound percist, someone knows what is happening? Thanks a lot in advantage.
very sad to see this beautiful machine need a new clutch at 8000 miles . thats called abuse to a car . i have a 2019 nd2 38700 miles runs perfect . i guess people dont realize that the harder your run these little gearboxes the faster they wear out . i had a 2009 bmw 328 coupe 6 speed manual 180,000 miles , same clutch , brakes , rotor and pads . anyway . nice to see this nd2 is in good hands now .
So my clutch lever has been getting stuck half way when driving fast and shifting, and I have to sometimes drag it back into place with my foot while driving and it's super sketchy, do you think my clutch is dying or am I just bad at shifting? 2016 with 69k miles.
As a former dealership mechanic, your work is impeccable. Suggest you where safety glasses and let that gorgeous lady help you more.
You uploaded this TWO years ago, I just wanted to say I have watched you like you're Dom Toretto. I'm currently at the 1:25:47 mark. Just thought you deserve a MASSIVE thank you and well done. This truly is an absolute brilliant video. The fact it's 2:15:16 in total, the extra time it must have taken to fuss around with the cameras and some of the lighting. Just wanted to give you a big shout out from England, UK from a new MX5 ND owner, who is now going to subscribe. Brilliant, just brilliant!
Thank you for the kind words bro! I appreciate you taking the time to watch the video!
You certainly know what you are doing.. brilliant to see it in real time....👍
Thorough clutch job. Really took time to explain the details which many will not do. Also why to put the grease where you did & not in others. Nice to have all those tools helping to do it right. Awesome Jonathan ! 😎
Glad you like the video! I appreciate you taking the time to write this kind comment bro!
Amazing video. Thanks for taking the time to record and upload it. That's a lot of work.
Great video. Thanks for taking the time to show every step! Just replaced my transmission...... with a lift. I would not want to have done it without the lift. Alos thanks for calling out the torque specs when doing the reinstall.
Top tier bro most no nonsense video for stuff like this.
This is a great video. I’ll be uploading my own tutorial of this removal soon in case anyone else has trouble following his video.
Fantastic video. Very comprehensive and informational!! Nice job!!!
Just subbed for this content. Not cutting the install short and showing the entire process. Please post more ND or NC content if you get them in shop. Not too many people doing it as clear as this!❤
Very professional and thorough engineer. You can work on my carcany time
SUPER !!! nice video . Very clear step by step instructions .
Book marked this. I have 16k miles on my 2019. I hope this video will be around in 40 years when I need it :)
Glad the video came out useful for you bro!
All that trouble just to replace the clutch? I'd better be kind to my clutch! 🤣
Headband flashlight would have come in handy while filming. You remind me of my brother who is also a mechanic. Great job! Good luck.
Great work an video... very complex stuff to film... thanks
What kind of “lube” did you put on the drive shaft going into the transmission? Great video.
Nice! From all the videos about clutch replacement this is the cleanest!
Do you thing an automatic RF could be swapped with a manual transmission without pain? Its just a curiosity.
I recently bought mi first Miata, a ND 2019 in México. The passenger airbags lights are not showing, so just dissasembled the indicator and I found no leds are installed. First project is to install those leds or replace the board. But I cannot find schematics or anything usefull. Can you point me where can I find Miata schematics, please?
Great tutorial. Thank you for making this.
I have the exact same car and year, but bought it new (leftover model year) during the outbreak of the pandemic in April, 2020, and now has over 15,000 miles only due to the pandemic, work from home or retired, and just a weekend car! 🙂
That’s awesome bro! Enjoy the car!
Great video, thanks for explaining in detail.
Replaced my flywheel and clutch recently, (not DIY though) my mechanic didn't use torque wrench with specific torques that I told him according to your video, to tighten flywheel and clutch plate. Should this be a concern? Could this damage new flywheel or clutch?
Great video, detailed and captured every step. Thank you.
Is filling the shifter assembly part of the regular service? I haven't seen that part before.
Excellent video😊😊
Thank you for the great video. In retrospect, do you think you needed to remove the manifold or could you just have loosened the exhaust at the manifold joint?
My favorite customer, the one who blows a clutch in only a few thousand miles. :)
What's the ballpark cost for the clutch replacement you charge your customers? just bought a 2019 and it seems it needs a new throw out bearing so might as well get the clutch done too. Previous owned must've hooned it a lot.
Thanks a TON for the video! One question: I didn't see you align the PPF??? The FSM shows there is a measurement from the underside chassis brasses to the PPF.
Hi Benjamin, glad the video was helpful! During this repair the nuts that fasten the brace to the transmission left a blemish where there were previously installed. I simply matched the position where the nuts were previously installed upon assembly. It is also not adjustable where the brace mounts to the rear differential. At approximately 1:40:00 into the video, you can see that I verify the position of the nuts prior to tightening them down.
Loved it. Thanks for sharing.
Good work. How did you test to make sure the owner didn't grenade the trans as well? Just no metal bits in the gear oil?
I’ve done it on two transmissions and trust me you’ll hear it lol. The clutch will go in and out fine but when you try to change gears you will feel the bits locking up random gears it is very easy to tell
Very useful. Must've been a PITA to film.
Great video! Does anyone know how i can remove the clutch release bearing sleeve that the bearing sits on? trying to replace my version 1 with a version 5 and the website i bought from tells me i need to swap them out for it to work in my ND1
It should just be 6 bolts that hold the clutch release bearing shaft cover on. Refer to part number: PE33-16-220.
Good job, very instructive video!:)
Thx sir!
Hi, can you share the codes of the parts or the website where you bought the Clutch Kit?
I'd be really grateful.
I have a 2016 mx5 that rattles a bit slowing down at around 2500 rpm. Sound goes away when clutch is pressed. Do you happen to know what can cause that?
Do you need to change the spigot bearing when you change the clutch kit, my mazda has difficulty engaging 1st and reverse gears sometimes other gears .
Next time you do one again take of the two motor mount bolts jack up to engine push engine to the left remove the exhaust manifold it will make it easier to drop and when you are under about to take it out use your pole jack with a peace of wood and jack it up a few inches witch will make it easier to turn the transmission and drop it
Can anybody help me? I tooked my ND to it's clutch replacement, but now everytime that i shift from 1st to 2nd gear @5,000/6,000 rpm, it makes s clap just underneth the arms rest, it's a metallic loud clap, i'm concerned and the mechanics saids everything it's fine, it has been checked 3 times now and the sound percist, someone knows what is happening? Thanks a lot in advantage.
wow, the driver destroyed the clutch in less than 8k miles!! I had mine for 20k miles and a few race starts and doughnuts.
Doughnuts won’t do anything as long as you keep it in the same gear
why not just go with a higher performance clutch?
The transmissions are pretty weak, I would worry that a more aggressive clutch would be really hard on the transmission.
Nice
god bless you thanks
very sad to see this beautiful machine need a new clutch at 8000 miles . thats called abuse to a car . i have a 2019 nd2 38700 miles runs perfect . i guess people dont realize that the harder your run these little gearboxes the faster they wear out . i had a 2009 bmw 328 coupe 6 speed manual 180,000 miles , same clutch , brakes , rotor and pads . anyway . nice to see this nd2 is in good hands now .
2:15 hours…is it the real time it take you to do the job ?
Hard to say how long it took me total since this video was shot in 2020, but I believe it took me 10-12 hours total.
@@jonathanjovenal thanks for the info Jonathan…good job 👍
Mazda dealer charged me 8 hours to do mine on a 2021
Must have been really riding the clutch to strip the clutch in 8k miles.
So my clutch lever has been getting stuck half way when driving fast and shifting, and I have to sometimes drag it back into place with my foot while driving and it's super sketchy, do you think my clutch is dying or am I just bad at shifting? 2016 with 69k miles.