Fast Freewing Avanti 6s 236km/h 1kW WeMoTec jet sound Li-Ion Oracover 80mm edf
HTML-код
- Опубликовано: 23 апр 2023
- Freewing Avanti S.
EDF - WeMoTec 11 blade 80mm
Motor SSS 3660 1650kv 245g (no heatsink)
ESC 60A
max power 1,2kW, 55Amp, 6s
batteries Li-Ion, 6s 4500mAh, total battery weight 450g.
GPS sensor GPS-Logger 3 www.sm-modellbau.de/GPS-Logge...
Transmitter FrSky Horus X10 Express on Open TX firmware.
Receiver FrSky Archer SR8 with stabilisation and full telemetry (amps, mAh, volts, temp, km/h)
#namaxa_media
#WojtekBrzozowski
#EDFjetRC 
Наука
Always amazing what you get out of those little foamies especially with all your modifications! Well done!
Stuwe, I got a little into fpv and are testing Caddx Vista at 5km and DJI O3 at some distance too:) The O3 and Goggles 2 are amazing.
following your footsteps ruclips.net/video/-t2m_BrK9lQ/видео.html
ruclips.net/video/_Jb4lSpz94M/видео.html
This year I seem to have gone from edf jets to FPV flying I really enjoy it 👍👍
@@EDFjetRC Well done both of you! I is a different ball game flying FPV but opens up so many new possibilities. The real fun begins once you start flying FPV EDF's :) keep it up and I hope there will be a video at one point.
When are you coming back with a new video? Love your knowledgeable, pushing the envelope, videos. Sto lat
Great job again buddy! Always a pleasure to watch you fly!!
Wojtek, great video as usual, keep them coming.
So happy you are back!
Very impressive 👏.... I love your setup, sound,aero dynamics 👍
Thanks for sharing 👍
Fast...
Omg. This is Amazing. Such a beautifully filmed video. Props to the camera person for following the Avanti. I now am on my second Avanti s. After 200 flights I am bored of the power. But Geesh 146mph is Amazing! Great job. I would have never thought of thinning those edges. Like you said it helps to decrease turbulence tremendously as the air from both sides meet together at the same point vs having a gap not causing the air to meet at the end of the point.
I'm so glade you're making videos again, I get so excited watching your content. (No homo) 🤣 but about the Innovative work you do. I want to run this type of setup on a couple of my jets.
Another excellent video
Nie tyle prędkość, co dzwięk jest nieprzeciętny. Swietny setup, gratulacje
Radical flying...I would really like to see how you sharpened the edge of the control surfaces and finished them off.
If you make one in fiberglas , I will be buy your second one, Its so a good flying aircraft, I have also the same, super well performing for our hobby, greetings from Remi, Belgium
Great video! Would be nice to see rebel HOT with edf and li-ions. Would need some cheater holes for edf. By the look is almost the same like avanti and we all love the avanti 🙂
Great Video. I really recommend you try to get an FMS/Eflite ViperJet 90mm . It's one of the best flying jets, even better than the Avanti (I have both, lol). And the viperjet is built much stronger compared to the Avanti, so you can push it to higher speeds. Give it a try, you won't be disappointed.
Hi. Love your videos and have an Avanti s myself. Would you be able to give any advice or do a video on how to mount a runcam 2 to the Avanti please as it would be great to see onboard footage 👍
Nice
more vids plz !!!! :P
Thumbs up!
Hi curious to know what the flight weight and thrust is on your setup
And would you recommend to keep it above 1 to 1 ratio thrust to weight
Another good setup and a fast and long flight! This is not possible with lipo 6s! I was not lucky to find the same battery cells, they are rarely in stock. Do you have other addresses to get the same cells? Thank you and take advantage of the weather to fly 😊
Hi Wojtek, I find the tests you do and the performance you get very impressive. Could you indicate what exact model and motor you use in the Wemotec EDF, I can't find for 80mm 6S 55A, the lowest consumption is 82A. Do you put any calculated reduction in the output duct of the EDF?
how do you sharpen the trailing edge of the control surfaces?
Hey, Wojtek
Amazing as always. Do you think for jets like this or other sub 100Amp applications it is okay to solder the li-ion cells with 14awg or 12awg copper wire instead of the copper strips? That would be nice, so my medium string soldering iron, can accomodate that.
Thanks in advance!
Mr. LowAndFast!
Nice flight and landing.
What I don't understand is how you achieve such speeds with only 1kW compared to the stock EDF unit.
Impressive full throttle flight times... is it so much more effiecient with your mods???
I bought some of these molivel to build a few packs myself after watching your other videos. Could you share the stl file for the end caps.
Wow! Nice flight! Very fast! Flying weight?
where did you purchase your speed indicator and does it work with Spektrum?
Hello there from New Zealand.
A little off topic, but i see you're using OpenTx FrSky X10s with telemetry. I have the Horus X12S on OpenTx also, but having problems with telemetry. I fly glow power but looking at getting into edf's. The problems im having eith my telemetry is daisy chaining 2 or more together through the S port. I can only read first one i have plugged in. I can detect and read each unit separately, but can only read the first one i plug in, not all. I have cell voltage, air speed, and verio for hight clime rate. Can you give me any advice do i can use all three together. Thanks for you help in advance. FrSky keep telling me i need to Buy the New X20S, seems a poor answer for some thing that should still work on ACCST and ACCeSS protocols
Hey, Wojtek. What is thrust-to-weight ratio? Approximately 0.67?
How do you make them training edges sharp?
It's EDF but the sound of it just like a turbine jet... how you could set it in order to have a jet sound....thank you in advance 🙏
hawe do you get it to soumd like that
How and what do you use to get the tips of wings and stab to a pointed edge?
balsa
caray de una publicacion de 170 kph ahora a una de 236 kph. con lo mismo?
Can you do a video showing the mods on the Avanti? I'd like to improve my stock Avanti to get less drag. It's a little unclear as to what you did to cover gaps and which gaps you did cover? It also looks like you cut some square holes in the intakes. Be great if you could talk about those too. My stock Avanti pulls 110 Amps on takeoff, 2500 Watts with 6S lipo's.
Yes Wojtek, please can you show how you oracover foam model and other your mods. Nice flight and model.
Hey Woijtek. Great video and flying again.
Im impressed with your results on the Li Ion cells. Would you say that drawing 55A from them on takeoff and speed runs is healthy?
Would the be a good fit for a 40A peak draw on a 64mm edf?
it is a light load for this new cells
@@EDFjetRC thank you Wojtek
Can't find any 18650KV. Do you think the SSS 3660 - 1620kv would get even close to your performance?
I am using 1650kv
I’d like to try this in stock Avanti same battery, would you reccommend limiting full throttle to 70 amp draw to preserve the molicell? I will also try 2 in parallel without limiting throttle.😊
do not limit the throttle, the battery will cope
Show in the camera the actual speed , not by your radio -
the sound not real
Camera man need more coffee. Can not keep you in the shot.
Dude look like your speed is not really accurate - the sounds is nice --but that speed is like 110mph - prove it with gps and show the in the video without editing
You do know 236 kph is only about 146 mph?.
@@tonysmith7702 of course - that speed is not 146 mph - look slow in the video - i flew many of jets and racing plane -