@@josrojdaz Don't worry, it doesn't change the voltage of the battery. 7.2 or 7.4 are the same, just the reference is different. In fact, when fully charged, the voltage is above 8.2V.
Great thought but the top opening hole is a design flaw. You should make a flexible rubber gasket through which you can push the battery and not risk water coming into the battery compartment
The design is to make the handle as small as possible, so that it can be held well. Adding such a device will make it higher, and the shutter button will not be touched by fingers. You should know that the battery itself is higher than the camera. So this is not a design defect, but the most appropriate. You can't find a smaller NPF battery handle than it.
As a buyer of this product from this seller, I can say that the sold M42N M.2 Solid State Drive Case (NVMe protocol) works with my SABRENT 2TB Rocket NVMe PCIe M.2 2242 on Sigma fp, emitting a lot of noise, which is recorded in the camera accordingly. I found out about this problem too late, after I ordered the ssd and accessories. I could not solve the problem by gluing thermal paste on the bottom of the board, as the seller assured me that it would remove the noise from the case. I contacted other bloggers and youtube authors who also bought this system, but they either ignored my comments, or also suffered with this system. It would be better if such things would be made by a reliable company, which can be trusted, such as Sigma!!!!!!! its
this is a well documented issue caused by the drive you picked, not by the case or accessory. You picked a noisy drive and are now making it the accessory company's fault? pitiful.
Mine is on it's way. I'll post some pictures when I put it all together. Great work!
How has this battery grip held up after 1 year?
Great work on this caddy! I only wish it had a power plug for an external monitor/recorder.
Of course, if you have the tilt screen mod too, then you don't "really" need an external monitor, making this a really powerful setup.
If the NPF550 battery is used to power both the camera and monitor at the same time, the battery may be too low.
This is awesome!! Does the battery grip come with the dummy battery and the npf battery when ordered from your online store?
Hi. The product includes grip and dummy batteries, and NPF batteries need to be purchased separately. Thx.
can this F570 battery be charged using the Sigma FP USB plug in?
Yes. But it's veyr sloooooooow.
That is awesome. How many hours with 3500 battery?
i‘m also wondering
@@ubir9743 3600mAh about 2～2.5H ？
3400 battery will record uhd cdng to hdd about 80mins
@@高日天-z8j thanks
@@高日天-z8j 啊啊，如果能有个3个小时的轻量解决方案就好了
What brand of battery being used in demo for Sigma fL
Recommend ZITAY 3400mAh batteries.
@@DarkPowerLaboratoryyour battery is labeled 7.4v , isn’t it dangerous for the camera? The original is 7,2v.
@@josrojdaz Don't worry, it doesn't change the voltage of the battery. 7.2 or 7.4 are the same, just the reference is different. In fact, when fully charged, the voltage is above 8.2V.
@@DarkPowerLaboratory thank you!
Great thought but the top opening hole is a design flaw. You should make a flexible rubber gasket through which you can push the battery and not risk water coming into the battery compartment
The design is to make the handle as small as possible, so that it can be held well. Adding such a device will make it higher, and the shutter button will not be touched by fingers. You should know that the battery itself is higher than the camera. So this is not a design defect, but the most appropriate. You can't find a smaller NPF battery handle than it.
如果拍照片，可以拍多少張左右？
这个数量很难说。拍最高格式的视频，用我的硬盘盒，3400mAh的电池可以连续三个小时。照片，我想连续拍一两千应该是可以的，但我没具体试过，因为拍照的时间和电量之间没有比例关系。
Where can I order this accessory?
facebook.com/DarkPowerLaboratory
有相應的兔籠嗎？
请看频道里的视频。
@@DarkPowerLaboratory 您誤會了，我的意思是您出了這次的一些新設計，要不要把兔籠一起組起來，給大家看個感覺，特別是有EVF的，謝謝！
@@RyanBBXD 好的我会更新更多的内容。
真香，又要剁手了
As a buyer of this product from this seller, I can say that the sold M42N M.2 Solid State Drive Case (NVMe protocol) works with my SABRENT 2TB Rocket NVMe PCIe M.2 2242 on Sigma fp, emitting a lot of noise, which is recorded in the camera accordingly. I found out about this problem too late, after I ordered the ssd and accessories. I could not solve the problem by gluing thermal paste on the bottom of the board, as the seller assured me that it would remove the noise from the case. I contacted other bloggers and youtube authors who also bought this system, but they either ignored my comments, or also suffered with this system. It would be better if such things would be made by a reliable company, which can be trusted, such as Sigma!!!!!!! its
this is a well documented issue caused by the drive you picked, not by the case or accessory. You picked a noisy drive and are now making it the accessory company's fault? pitiful.