Since this comment is on our cylinder head guards I'll assume you have the guards. Because the Cylinder Head Guards cover up the entire bar you can't run the guards and highway pegs at the same time. However, if you want to swap out the guards when you ride on the street, or if you don't have the guards your best bet is to mount them on the top bar that runs at the top of the cylinder heads. I'd suggest getting on your bike and extending your legs out to feel where its most comfortable. On our highway peg product page we have some graphics that help with fitment suggestions: www.altrider.com/altrider-universal-highway-foot-pegs/pid/3246
@@AltRiderLLC correct, I was looking at the top bars but due the bar’s inclining inwards the Pegs point inwards also. I won’t be removing the cylinder covers I like them so much, so will check out the link you sent for alternative locations. Thanks for replying, really appreciated.
Absolutely! We make cylinder head guards for the AltRider crash bars, and for the BMW OEM crash bars! Here are the crash bars for the BMW OEM bars: www.altrider.com/altrider-cylinder-head-guards-for-bmw-r-1250-gs-adv-oem-crash-bars/pid/3275/cid/1
You can purchase these from our website here: www.altrider.com/en/product/detail/pid/3275 in the US, or www.altrider.eu/altrider-cylinder-head-guards-for-the-bmw-r-1250-gs-adv-oem-crash-bars/pid/2789 in Europe. Thanks!
That's the cleanest and best thought out design I've seen yet! Nice job!
Thanks Kelly, glad you like them. We are currently working on a set to fit the AltRider crash bars as well, those should be available soon.
@@AltRiderLLC I can't wait! I'm on your mailing list so will be watching for those.
Those look really clean!
Thanks glad you like the look!
I purchased these for my 2023 GSA and then just purchased the Altrider highway mount pegs.
Where will I be able to mount the new highway pegs?
Since this comment is on our cylinder head guards I'll assume you have the guards. Because the Cylinder Head Guards cover up the entire bar you can't run the guards and highway pegs at the same time.
However, if you want to swap out the guards when you ride on the street, or if you don't have the guards your best bet is to mount them on the top bar that runs at the top of the cylinder heads. I'd suggest getting on your bike and extending your legs out to feel where its most comfortable. On our highway peg product page we have some graphics that help with fitment suggestions: www.altrider.com/altrider-universal-highway-foot-pegs/pid/3246
@@AltRiderLLC correct, I was looking at the top bars but due the bar’s inclining inwards the Pegs point inwards also.
I won’t be removing the cylinder covers I like them so much, so will check out the link you sent for alternative locations.
Thanks for replying, really appreciated.
Thank you for the demonstration. Will they fit on my 2021 R1250GS Adventure with OEM crash bars?
Absolutely! We make cylinder head guards for the AltRider crash bars, and for the BMW OEM crash bars!
Here are the crash bars for the BMW OEM bars: www.altrider.com/altrider-cylinder-head-guards-for-bmw-r-1250-gs-adv-oem-crash-bars/pid/3275/cid/1
@@AltRiderLLC thank you so much. I'll get them.
Does it increase engine temp?
Naw, it still has great airflow over the front, top, bottom, and rear of the cylinder head
Do you make these to fit other vrash bars such as sw motech ?
Our cylinder head guard is made to fit the AltRider 1250 bars, and the BMW 1250 bars
Will this fit alt rider crash bars?
We have 2 versions of our Cylinder Head Guards for the GS1250: guards that fit our AltRider bars, guards that fit the BMW bars
Hi , can you give me a link from where to buy your product pls. Thx
You can purchase these from our website here: www.altrider.com/en/product/detail/pid/3275 in the US, or www.altrider.eu/altrider-cylinder-head-guards-for-the-bmw-r-1250-gs-adv-oem-crash-bars/pid/2789 in Europe.
Thanks!
Don’t forget to use loctite!
We use locking nuts with these, so you don't need it, but some thread locker certainly won't hurt