Comgrow Medium Laser Enclosure - Use your laser indoors with more flexibility!
HTML-код
- Опубликовано: 2 дек 2022
- Using a diode laser indoors can be hazardous without the proper enclosure to help contain the laser light reflections, smoke and other fumes created while cutting and engraving on various materials. While building your own is a way to get the exact setup you need, not everyone has the tools, time or building knowledge to take on that task. Today we look at a good option from @ComgrowOfficial that's easy to set up and effective when combined with an exhaust fan and tubing to route the smoke and fumes outside.
Thank you to @ComgrowOfficial for providing the enclosure for this video.
Follow me on Facebook and Instagram to keep up on behind-the-scenes shop information!
/ vintauri
/ vintaurisworkshop
The links below are to products used in this video, some links are affiliate links that provide a small commission to this channel at no additional cost to you.
Links direct to Comgrow
----------------------------------------
Comgrow Medium Enclosure - www.comgrow.com/collections/e...
Comgrow Z1 Laser - www.comgrow.com/products/comg...
Comgrow Honeycomb Bed - www.comgrow.com/collections/e...
Amazon Affiliate Links
------------------------------------
Comgrow Enclosure - amzn.to/3Us0q1u
Comgrow Honeycomb Bed - amzn.to/3h4hlJA
Comgrow Z1 Laser - amzn.to/3ukMBqT
FreeMascot OD6+ Laser saftey glasses - amzn.to/3Uunxs0
Vivosun 4" Exhaust Fan - amzn.to/3VIIwsa
Vivosun 4" vent tubing - amzn.to/3P1SAKW
Atomstack A20 Laser - amzn.to/3VMkeNT
I really like that Atomstack..... Great video
It's been a great machine so far!
Finally pulled the trigger and bought the medium enclosure with the fan. In the end, your video helped me make that decision. Postage to New Zealand is high hence it took so long to fork out the money. Thank you for the great, informative videos both from you and the Clack Shack.
I’m glad to have been some help. That’s one of my goals is to provide a good overview of things so people have a better understanding of what they are looking at with these products.
I am looking for one of these mfg's to make one to fit a laser with extended rails (800mm long by 400mm wide). Have you seen any of these?
I've seen rumors of one from Sculpfun that is 1440x720x360mm but I've not seen it for sale on their site, or any reputable sites that I'd trust ordering from. I'm hoping to see one soon as I've got the rail extensions for my Sculpfun S10 machine and I'd rather not build my own if there is a reasonable commercial kit available.
How well did the Atomstack fit also was it tall enough for a camera? Great vid.
The Atomstack fits just fine in this one. As for a camera, you’ll need one that it a little more wide angle then the standard but there is enough height to make one work. However the one offered by comgrow sits too high for this enclosure.
Apply fire to the orange screen
Been looking at getting one of these for my xTool D1 Pro. Thank you for the informative video. Question - would the exhaust port fit a normal shop vac? The black part of the exhaust looks like 4 inches but is the blue part an adapter for a shop vac?
The blue piece was just a plug and not an adaptor. You would have to find a 4" to 2" adapter to fit it to a shop vac. There are dust collection fittings sold at woodworking stores that might work.
@@Vintauri Thank you for your reply. It helps make the decision to just add the extraction fan and pipe to the purchase. Much appreciated.
@@onsapplikasies8620 Glad I could help!