I am doing this now - you can loosen or even remove the 41mm nut while it is still on the car, but you may need a thin wall socket or a normal silver one. I couldn't so had to take the whole strut somewhere with a large impact wrench to undo it and it was quite easy with the correct tool. My next problem was getting the metal tube of the new airspring over the large o-ring - it was stiff and no grip to hold.
Any other idea figuring this out why it still leaks after replacement ? I had a leak at the top of the strut....never checked for other places and just assume is either the bag or the gasket...purchased the bag and follow all instructions here step by step and reinstalled. With the new bag it still leaks at the same place, top of the strut. What else could cause the leak up there other than a defective new/old blown bag and the little 2 gaskets that get installed on the strut which are the new ones provided that I used.
John Medhurst I did change mine on my own I bought the air spring bag on eBay shipped from china is about $ 250 including shipping cost. I was by myself and couldn't got the opportunity to take a video coverage and post it on RUclips
what is your source for the air bag assembly? when I replaced my front drivers side I only found whole strut assembly. and how much does this cost versus getting a whole strut? I can only imagine that this is much cheaper if you don't need to replace the strut.
djenn434 when you buy the bag, the rings are provided. Don’t try to fix the leaks with the rings, they don’t work, the rings are only to prevent the bag to move up/down too fast that break the bag.
djenn434 because the ring on top leaks more than the bottom, hence you see the leaks on the top. I’m 99.99% sure that the ring won’t fix the leaks LOL.
@@3dogs1monkey I'm not really sure what you meant by last statement. If airbag itself is leaking, why would air shoot out top of strut? Wouldn't it leak out side of strut under the boot? I haven't taken one of these apart but the airbag rubber seems like just a outer sleeve that keeps inside air tight. So air enters through valve, pressurizes metal chamber which is sealed by rubber airbag, lower o-ring, and upper o-ring. It seems like when you tested air bag in other video having to seal top hole and bottom hole proves the two O-rings are needed for strut/shock to hold air. What am I missing? Doesn't really matter I guess, I already sent leaking strut back to seller and now am looking at a rebuild kit .
I tearout the upper 9mm bolt? Pillar? And cannot detach the 18mm bolt, ㅜㅜ how can i replace it, i sprayed wd40 and on and on . . But 9mm part does not fix properly t.t
If you can’t get the 9mm out, you can’t get the shock out. Buy a new strut. Try to loosen the 41mm from the car, it’s easier ruclips.net/video/4pyzyftN3wg/видео.html
Love the videos buddy! Just ordered my whole front control arm kit & been watching your videos that will help big time!
Thanks for sharing and taking the time to post!
I am doing this now - you can loosen or even remove the 41mm nut while it is still on the car, but you may need a thin wall socket or a normal silver one. I couldn't so had to take the whole strut somewhere with a large impact wrench to undo it and it was quite easy with the correct tool. My next problem was getting the metal tube of the new airspring over the large o-ring - it was stiff and no grip to hold.
Any other idea figuring this out why it still leaks after replacement ?
I had a leak at the top of the strut....never checked for other places and just assume is either the bag or the gasket...purchased the bag and follow all instructions here step by step and reinstalled. With the new bag it still leaks at the same place, top of the strut. What else could cause the leak up there other than a defective new/old blown bag and the little 2 gaskets that get installed on the strut which are the new ones provided that I used.
Bardzo dobra robota 👏👏
Pozdrawiam 👋👋👊👊
great video!
Well done! Hope I don't have to do this on my D3 in years to come. But you never know.
John Medhurst I did change mine on my own I bought the air spring bag on eBay shipped from china is about $ 250 including shipping cost.
I was by myself and couldn't got the opportunity to take a video coverage and post it on RUclips
Where I can find just the shock gas?
Great video!!!!
what is your source for the air bag assembly? when I replaced my front drivers side I only found whole strut assembly. and how much does this cost versus getting a whole strut? I can only imagine that this is much cheaper if you don't need to replace the strut.
o0ThunderGod0o www.ebay.com/itm/252537823763
3dogs1monkey many thanks. this will be a great help in the future
Thanks for video, I get to attempt this repair now. Just need to locate a o-ring kit.
djenn434 when you buy the bag, the rings are provided. Don’t try to fix the leaks with the rings, they don’t work, the rings are only to prevent the bag to move up/down too fast that break the bag.
@@3dogs1monkey Damn, ok thanks for info.
@@3dogs1monkey Are you 100% sure? My leak is coming through the top where the wires comes out.
djenn434 because the ring on top leaks more than the bottom, hence you see the leaks on the top. I’m 99.99% sure that the ring won’t fix the leaks LOL.
@@3dogs1monkey I'm not really sure what you meant by last statement. If airbag itself is leaking, why would air shoot out top of strut? Wouldn't it leak out side of strut under the boot? I haven't taken one of these apart but the airbag rubber seems like just a outer sleeve that keeps inside air tight. So air enters through valve, pressurizes metal chamber which is sealed by rubber airbag, lower o-ring, and upper o-ring. It seems like when you tested air bag in other video having to seal top hole and bottom hole proves the two O-rings are needed for strut/shock to hold air. What am I missing? Doesn't really matter I guess, I already sent leaking strut back to seller and now am looking at a rebuild kit .
I tearout the upper 9mm bolt? Pillar? And cannot detach the 18mm bolt, ㅜㅜ how can i replace it, i sprayed wd40 and on and on . . But 9mm part does not fix properly t.t
If you can’t get the 9mm out, you can’t get the shock out. Buy a new strut. Try to loosen the 41mm from the car, it’s easier ruclips.net/video/4pyzyftN3wg/видео.html
Good
Hi,did you pre pressure the airbag before instal or just pump it up with the car compressor after instal.
Richard Meisel No, i turned on the ignition for the pump to pump to check for leaks before lowering the car.
3dogs1monkey ok thanks,i wil do this repair the coming week sso we wil see how it goes.
Is the bag still peforming well?
Richard Meisel the suspension is like original, perfectly working
3dogs1monkey Pefect, i will let you know how it goes with mine.
Ps ,did you have to do a suspension hight calibration?
Richard Meisel No, just the height for the CA because I had to replace a bad one. Don’t mess with VCDS and screw everything up.
how are the new air spring bags? still running?
Mustafa Solmaz yes, running like original
@@3dogs1monkey also the ones from China?
Mustafa Solmaz made In China shipped from California
@@3dogs1monkey Big thanks. ill get some of these if o-ring change wont work. can you please tell me the size of the o-rings?
Mustafa Solmaz o ring will never work, don’t bother
Took me a while to find, but this is how you de pin the connector so you don’t have to cut. ruclips.net/video/RytEwNbhak4/видео.html
Thanks for the tip Paul
Провода зря різав,верхню шайбу не так вчіпив