How to Replace Transmission Valve Body 2005-2010 Dodge Dakota
HTML-код
- Опубликовано: 17 окт 2024
- Buy Now!
New Valve Body Solenoid from 1AAuto.com 1aau.to/ib/MPTR...
This video shows you how to install a new Transmission Valve Body in your 2004-2012 Chevrolet Colorado.
This process should be similar on the following vehicles:
2005 Dodge Dakota
2006 Dodge Dakota
2007 Dodge Dakota
2008 Dodge Dakota
2009 Dodge Dakota
2010 Dodge Dakota
Tools you will need:
• 18mm Socket 1aau.to/oZM/1AX...
• 19mm Socket 1aau.to/oZM/1AX...
• 8mm Socket 1aau.to/oaKg/1A...
• Dead Blow Hammer 1aau.to/oKH/1AX...
• T25 Socket 1aau.to/oAC/1AX...
• 1/4 Inch Ratchet 1aau.to/oaKg/1A...
• Ratchet 1aau.to/obea/1A...
• Socket Driver
• Socket Extensions 1aau.to/oa2p/1A...
• Torque Wrench 1aau.to/oaka/1A...
• Cloth Rags 1aau.to/owH/1AX...
• Gloves 1aau.to/oxB/1AX...
• Transmission Fluid
• Drain Pan 1aau.to/os9/1AX...
• Floor Jack 1aau.to/oPk/1AX...
• Funnel 1aau.to/ofL/1AX...
• Jack Stands 1aau.to/oKR/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/opI/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
tell me how you got the bolt back in the pan, above the crossbar 😭
I have a 2004 4 * 4 I am assuming the procedure is roughly the same? I absolutely love how thorough you are on your work you are a lot more professional than most of the videos covering these topics thank you for being awesome!!
Thanks for posting this. It will prove very helpful this coming week for me. 👍
I just recieved a *new* mopar solenoid from rockauto. It's saturated in transmission oil?! Is this right? Or did I get shipped a previous returned part?
If your truck have over 200k do u used new atf or 1/2 from the old atf and add more atf?
Thank you for your wonderful mechanical help and parts and information regarding this vehicle. When replacing the solenoid does it require the trs plate to also be replaced and what part would that be ? 68002342af or 68002342ae? Do you have this part? Please Advise prior to doing the replacement of solenoid which has arrived Thank you very much! KC jesses mom
You did a swell job. Thanks for the video.
Rtv is good is a gasket it is good for transmissions I use it all the
Over all good video. Tho I’ve always used brake cleaner and had no problems clean it never heard to not use it. Also don’t clean off your old gasket with a wire brush that can scratch it. You should use a carbon non-marring tool.
Awesome guide, good clear instructions
What kind of rags is she using? Where can buy those?
Where's the shift sillinoid sen at? for 2007 dadge dakotasor
Thank you so much for this beneficial video 🙏🙏🙏🙏✋️🙂
Do you have any videos for any 97 98 chevys gmc?
I change the valve body and now my truck isn't starting up
They come from the factory with rtv....
So computer needs to be reset
Rtv seal better
This doesnt look like the 42RLE