If you found this video helpful, a donation would be highly appreciated! @t (BuyMeACoffee) @t (PayPal) Let me know in the memo if you would like a shout out on my next video!
Awesome video. Very helpful. I got my pump replaced today. NOTE: DO NOT TEST WITHOUT MIDDLE RACK INSTALLED or you'll get a nice leak from the front and chase that down for like 5 hours...
This was Extremely helpful!!!! Thank you for making this video! Our pump makes that exact whine. This is stuff the manual doesn’t tell you. They just want you to call their technicians and charge you $$$$.
My exact issue as well. This video was extremely helpful. Our LG dishwasher had all the symptoms mentioned in the video (the washer didn't complete the cycle, there were dirty dishes with dirty water in the dishwasher filter region, the detergent wouldn't empty from the detergent bin, and the high pitched whine was heard with Drain Error on the display). I called LG service and they indicated that it would cost $90 to have a local repair person come by and make an assessment. Of course there would have been additional cost for labor and the $50 part would have likely been marked up by the service company by 100%. I was able to fix the dishwasher, prevent landfill waste and I probably saved between 2-300$ in the process. Many thanks. The dishwasher is working perfectly now. The spare part was ordered from e-bay for $52 including the shipping. I also noted that checking the resistance of the drain pump with a multitester was useful. The bad drain pump measured 9-11ohms and the replacement was 2 ohms further giving indication that the repair mentioned in this video would solve the problem. I didn't have to replace the black rubber one way reflux preventing valve in the sump housing adjacent to the drain pump. That valve could only be seen on my unit after the faulty drain pump was removed and it was obvious that the rubber valve was positioned correctly and did not need to be replaced. Save yourself the money and prevent landfill waste by fixing this problem yourself!! This is a low to mild complexity fix. Thanks for this great video. I didn't have to go out and buy a new dishwasher!
If you are getting this message and you recently installed an Insinkerator garbage disposal, there is a plastic piece you need to knock out inside to the dishwasher inlet tube. Knock it into the garbage disposal and retrieve the plastic piece. Took us two days to figure this out on a brand new dishwasher. Removed plastic piece and it worked just fine.
This video was spot on for my problem. My Symptom was that pump would not run continuously when in drain mode. One or two second bursts. New pump runs continuously in drain mode.
If you ever put an Insinkerator garbage disposal and first thing you get OE code, there is a plastic tab on the dishwasher inlet tube you have to knock out and remove from inside of garbage disposal that needs knocked out. Found out the hard way.
Thanks for this video.! I need to recap on how to reinstall a drain pump. This is the second time I've had to replace it. I'll never buy an LG product again.
Thanks for the helpful video. Pulled the pump and it registered the right ohms. I was checking the impeller, and I was able to pull it away from the housing just a tad (sounded like removing a suction cup). Reinstalled it and it now it works fine...no more residual water. Hope this may help someone.
How did you pull the impeller away? I tried gently prying from both sides with 2 screwdrivers at the same time but I was scared the impeller might snap off. I suspect there might be some debris trapped underneath. I measure 4.2 ohms so not sure if my pump can somehow be saved?
@@Erich1 It didn't require much force. It popped out a bit by gently pulling it straight out. I wouldn't use any tools doing this. I can't say this a fix for everyone; it just worked in my case. BTW my washer is still emptying flawlessly.
@@sulwalki I tried prying really hard on the impeller and it won’t budge. It rotates with just a bit of resistance so I might leave it alone. Not sure how you pulled your impeller out.
My LG Dishwasher has buttons on the outside of the door, and has some different descriptions/labels on the buttons, 'Dual Intensity - Auto - Eco - Quick&Dry - Quick', model is LD-1482W4, which button combo is needed to turn the drain pump on. Normal use I hear it start, water comes out at the sink, yet I still get the error, it does how ever only run for short bursts
Where did you get the info that 3-4 ohms meant the pump was good and over 5 ohm is a bad pump? My new replacement is reading 5 ohms and the bad pump is 4.3 ohms. Verified these readings 3 times with two different high end digital multimeters.
I have a kdp6787bd, high pitched whine at start up sounds like pump, but no discharge to the disposal. When I cancel cycle it drains fairly quietly. Is it the grinder bearing in the pump making the noise? Not throw a code but this thing is noisey.
My kitchen sink got clogged up and the dishwasher will not shut off. I turned off the breaker for a few minutes but when the power was turned back on, the dishwasher was still running. Any idea how to shut it off?
With my LG I get something similar but it has an E1 error. From what I can tell, E1 means water has leaked out and the dishwasher has detected the water leak. The dishwasher then turns the pump on continually to try and empty the water. Even if you turn off power to the dishwasher, it will come back if it still senses water where it shouldn't be. You need drain it then let the water it's sensing dry out. Only then will E1 go away when you cycle power to the dishwasher. (Well technically provided water isn't still leaking you don't need to drain it but it's probably best.) As I mentioned in another reply, you can get E1 error with a draining problem, especially if you keep trying despite an OE error without properly emptying the dishwasher.
Might be a clogged drain hose then. I would take off the hose that goes into the sink drain lines and use a shop vac to vacuum the hose whilst having the dishwasher perform the drain operation.
Did you measure the voltage going to the pump during pumping. Mine does the same as yours and when I force it to drain, the pump works for 3 seconds then stops for 5 seconds and then starts again and keep doing the pulsing drain. I checked the resistance it reads 4.6 ohm I also checked the voltage going to pump it reads pulsing from zero to maximum 0.7 volts!
@@josephjames6369 I had the same problem, surging water flow from the pump but not completely draining. OE error before the soap drop and water left in the bottom. Ordered a new pump and had it in in about 20 minutes, only tools needed were a philips screwdriver to remove the kick plate and a pair of pliers for the hose clamp. Solved the problem and I now get a steady, strong stream out of the drain tube. Given the number of google hits on LG OE error I'm suspecting this is a very common problem.
@@chicagohandyman Thank you for commenting. I replaced the drain line, replaced the pump (the new one seems to be weaker than the original), I just replaced the sump assembly tonight, I've blown the drain out multiple times... Still OE.
Sounds like you have a clog in your drain line. I would take off the end that goes into your sink drain. Take a wet vac and vacuum on the end of the hose while running a drain cycle. Hopefully that will get your clog out.
Disconnect the drain hose under your sink. Use a wet/dry vac to suck on the end of the drain hose. At the same time, force a drain cycle on the dishwasher.
Yes, inevitably. It would be a good idea to get the part in advance so you have it when the pump fails. I’d keep using the dw as-is until the bottom of the dw is no longer dry after running it.
I have an LG LDF7551ST. Shows code E1. Power light stays on and pump runs continuous. i turn off with breaker pour water in and restart water will pump out but unit keeps running. I checked drain hose blew air back to unit no clogs. Could not find any leaks....????
As far as I can tell, E1 means water has leaked out and been sensed by the dishwasher. It then turns the pump on continually to try and empty the water. Even if you turn off power to the dishwasher, it will come back if it still senses water where it shouldn't be. You need drain it then let the water it's sensing dry out. Only then will E1 go away when you cycle power to the dishwasher. As for why E1 happens, it may be because the dishwasher got overfull because it wasn't draining properly, especially if you tried to run it a few times despite DE/OE. Or it may be there is a leak in a hose or something. If it's just an overflow from not draining properly, then this video could still apply.
@@tetyoonlee4373thanks for this. I just worked on my dishwasher trying to fix the lack of draining issue and now I’m getting a 1E code. However, I’m theorizing that the code may be coming through because in the process my dishwasher got water everywhere in it lol. That would include areas it’s not supposed to be. And there are no leaks underneath currently so hopefully tomorrow the code won’t come back.
Does the new drain pump sound like it’s running and you still get the DE? I would disconnect the drain hose and connect it to a wet/dry vac. Turn the vac on, and turn on the Drain feature on the dishwasher.
@@chicagohandyman correct it runs and and water moves/drains but it DE in the middle of a cycle. I have tired drawing water from the end of the drain tube and it works but for not every cycle. My thinking is the check valve may be stuck.
I ordered this new pump.. installed it.. and went from barely pumping to nothing at all.. thought it was a bad replacement pump.. ordered a new one and installed again.. same.. nothing at all
problem solved Amazon ABT72989206 $173.67 Phillips screwdriver and pliers required. Would say I'm unhappy with LG service, but that would imply that they responded and have a service department. They want you to throw it away and buy a new one. I think it's sad the one part LG brags about failed in 2 years regardless if they think it's going to make it 10.
![[LG Dishwashers] OE Error](http://i.ytimg.com/vi/mV5Pqa3M2ls/mqdefault.jpg)
If you found this video helpful, a donation would be highly appreciated!
@t (BuyMeACoffee)
@t (PayPal)
Let me know in the memo if you would like a shout out on my next video!
Awesome video. Very helpful. I got my pump replaced today. NOTE: DO NOT TEST WITHOUT MIDDLE RACK INSTALLED or you'll get a nice leak from the front and chase that down for like 5 hours...
This was Extremely helpful!!!! Thank you for making this video! Our pump makes that exact whine. This is stuff the manual doesn’t tell you. They just want you to call their technicians and charge you $$$$.
My exact issue as well. This video was extremely helpful. Our LG dishwasher had all the symptoms mentioned in the video (the washer didn't complete the cycle, there were dirty dishes with dirty water in the dishwasher filter region, the detergent wouldn't empty from the detergent bin, and the high pitched whine was heard with Drain Error on the display). I called LG service and they indicated that it would cost $90 to have a local repair person come by and make an assessment. Of course there would have been additional cost for labor and the $50 part would have likely been marked up by the service company by 100%. I was able to fix the dishwasher, prevent landfill waste and I probably saved between 2-300$ in the process. Many thanks. The dishwasher is working perfectly now.
The spare part was ordered from e-bay for $52 including the shipping.
I also noted that checking the resistance of the drain pump with a multitester was useful. The bad drain pump measured 9-11ohms and the replacement was 2 ohms further giving indication that the repair mentioned in this video would solve the problem. I didn't have to replace the black rubber one way reflux preventing valve in the sump housing adjacent to the drain pump. That valve could only be seen on my unit after the faulty drain pump was removed and it was obvious that the rubber valve was positioned correctly and did not need to be replaced.
Save yourself the money and prevent landfill waste by fixing this problem yourself!! This is a low to mild complexity fix. Thanks for this great video. I didn't have to go out and buy a new dishwasher!
If you are getting this message and you recently installed an Insinkerator garbage disposal, there is a plastic piece you need to knock out inside to the dishwasher inlet tube. Knock it into the garbage disposal and retrieve the plastic piece. Took us two days to figure this out on a brand new dishwasher. Removed plastic piece and it worked just fine.
yes that would be one of the first things to check just in case.
Thank you for the video even it is likes 4yrs already.. It helps me in my diagnosis and pump replacement as shown in your other videos.
You’re welcome!!
Thanks for making this! Helped us diagnose our dishwasher and realize the pump was gone.
No problem. I’m also learning that a clogged drain hose could also result in the same problem. Something to keep in mind.
This video was spot on for my problem. My Symptom was that pump would not run continuously when in drain mode. One or two second bursts. New pump runs continuously in drain mode.
If you ever put an Insinkerator garbage disposal and first thing you get OE code, there is a plastic tab on the dishwasher inlet tube you have to knock out and remove from inside of garbage disposal that needs knocked out. Found out the hard way.
Although I have a Siemens the tip about the pump giving a high pitched whine if bad was helpful, good video thanks for uploading!
Thanks for watching!
Thanks for this good video.
Can you show how to take off the bottom part that cover the pump in normal LG .
Thanks for this. Helped me diagnose the problem with my DW and have the confidence to fix it myself.
Good luck! Check out my 2 other videos that shows you 2 methods for the repair.
Thanks for this video.! I need to recap on how to reinstall a drain pump. This is the second time I've had to replace it. I'll never buy an LG product again.
I had to replace my pump again and I also watch my own video again to see how to do it!!
Thanks. Was able to fix my dishwasher with help from this video and one other one that pointed me to it being a drain pump issue
I had the OE error, drain program did not work; ended up blowing in the hose a couple times, did the trick :)
Great video. Explain everything quickly. Not my exact model but close enought
Glad it helped
Thanks for the helpful video. Pulled the pump and it registered the right ohms. I was checking the impeller, and I was able to pull it away from the housing just a tad (sounded like removing a suction cup). Reinstalled it and it now it works fine...no more residual water. Hope this may help someone.
Maybe your hose was clogged.
How did you pull the impeller away? I tried gently prying from both sides with 2 screwdrivers at the same time but I was scared the impeller might snap off. I suspect there might be some debris trapped underneath. I measure 4.2 ohms so not sure if my pump can somehow be saved?
@@Erich1 It didn't require much force. It popped out a bit by gently pulling it straight out. I wouldn't use any tools doing this. I can't say this a fix for everyone; it just worked in my case. BTW my washer is still emptying flawlessly.
@@chicagohandyman Hose was clear. It was the impeller.
@@sulwalki I tried prying really hard on the impeller and it won’t budge. It rotates with just a bit of resistance so I might leave it alone. Not sure how you pulled your impeller out.
My exact issue !!!, Thanks for posting !!!
My LG Dishwasher has buttons on the outside of the door, and has some different descriptions/labels on the buttons, 'Dual Intensity - Auto - Eco - Quick&Dry - Quick', model is LD-1482W4, which button combo is needed to turn the drain pump on. Normal use I hear it start, water comes out at the sink, yet I still get the error, it does how ever only run for short bursts
Look for a combo that says “Cancel”
I have the same issue. Did you figure out a combination?
On mine it's Delicate and Dual Control
Thank you so much this was very good information.
Glad it helped. Good luck with your repair.
Where did you get the info that 3-4 ohms meant the pump was good and over 5 ohm is a bad pump? My new replacement is reading 5 ohms and the bad pump is 4.3 ohms. Verified these readings 3 times with two different high end digital multimeters.
It was probably in a PDF from LG somewhere or possibly the wiring diagram on the inside of the toe kick cover.
I have a kdp6787bd, high pitched whine at start up sounds like pump, but no discharge to the disposal. When I cancel cycle it drains fairly quietly. Is it the grinder bearing in the pump making the noise? Not throw a code but this thing is noisey.
My kitchen sink got clogged up and the dishwasher will not shut off. I turned off the breaker for a few minutes but when the power was turned back on, the dishwasher was still running. Any idea how to shut it off?
Never had that happen to me.
With my LG I get something similar but it has an E1 error. From what I can tell, E1 means water has leaked out and the dishwasher has detected the water leak. The dishwasher then turns the pump on continually to try and empty the water. Even if you turn off power to the dishwasher, it will come back if it still senses water where it shouldn't be. You need drain it then let the water it's sensing dry out. Only then will E1 go away when you cycle power to the dishwasher. (Well technically provided water isn't still leaking you don't need to drain it but it's probably best.)
As I mentioned in another reply, you can get E1 error with a draining problem, especially if you keep trying despite an OE error without properly emptying the dishwasher.
Tried pushing those 2 buttons, but it looks like delicate button not responding. Any idea?
What if my pump doesn’t make a high pitched sound? I do hear some sound coming from the pump, but it’s not draining..
Might be a clogged drain hose then. I would take off the hose that goes into the sink drain lines and use a shop vac to vacuum the hose whilst having the dishwasher perform the drain operation.
@@chicagohandyman thank you, it was just installed, but will surely try this and see
I bought a brand new drain pump and I got a 5.4 ohms.. just an fyi
Did you measure the voltage going to the pump during pumping.
Mine does the same as yours and when I force it to drain, the pump works for 3 seconds then stops for 5 seconds and then starts again and keep doing the pulsing drain.
I checked the resistance it reads 4.6 ohm
I also checked the voltage going to pump it reads pulsing from zero to maximum 0.7 volts!
Is it supposed to pulse? I'm getting the DE code as well and if I force it to drain, it pulses like yours..
@@josephjames6369 I had the same problem, surging water flow from the pump but not completely draining. OE error before the soap drop and water left in the bottom. Ordered a new pump and had it in in about 20 minutes, only tools needed were a philips screwdriver to remove the kick plate and a pair of pliers for the hose clamp. Solved the problem and I now get a steady, strong stream out of the drain tube. Given the number of google hits on LG OE error I'm suspecting this is a very common problem.
ldf7774st is my model... Pump works fine, even replaced it, still OE.
Sounds like you have a clog in your drain line.
There’s a comment I posted here somewhere that explains how to clear the clog.
@@chicagohandyman Thank you for commenting. I replaced the drain line, replaced the pump (the new one seems to be weaker than the original), I just replaced the sump assembly tonight, I've blown the drain out multiple times... Still OE.
I keep getting OE as well 10 minutes into every cycle@@harryeichelberger4799
Have you checked the air gap?
My new pump is showing 4.8 ohms. It is spinning but doesn't sound like it is moving water. Any ideas?
Sounds like you have a clog in your drain line. I would take off the end that goes into your sink drain. Take a wet vac and vacuum on the end of the hose while running a drain cycle. Hopefully that will get your clog out.
I put in a new one it still doesn’t drain and the new one makes that high pitch whine. Any suggestions?
Disconnect the drain hose under your sink. Use a wet/dry vac to suck on the end of the drain hose. At the same time, force a drain cycle on the dishwasher.
You probably have a clog in your hose.
But how to remove the cap inside the dishwasher?!??!?! It moves up and down does it just pop off?
What If I never used it and its giving me a error, my kid pressed the power button and it was the first time I ever used it, we only used for storage
What error message are you getting? You might be getting a DE if your drain line is clogged from sitting unused for a long time.
@@chicagohandyman DE, we maybe used 1 or 3x when we first got it. It was 1300 lg dishwasher. I check the air gap and garbage disposal its clean
What's the difference between DE error and OE error
The actual error is DE. With the limitations of the 7 segment display, the D is confused as an O. There is no OE.
Also, DE stands for drain error.
So that intermittent pumping mine does says it’s going bad
Yes, inevitably. It would be a good idea to get the part in advance so you have it when the pump fails. I’d keep using the dw as-is until the bottom of the dw is no longer dry after running it.
I have an LG LDF7551ST. Shows code E1. Power light stays on and pump runs continuous. i turn off with breaker pour water in and restart water will pump out but unit keeps running. I checked drain hose blew air back to unit no clogs. Could not find any leaks....????
Figure it out? Same issue.
As far as I can tell, E1 means water has leaked out and been sensed by the dishwasher. It then turns the pump on continually to try and empty the water. Even if you turn off power to the dishwasher, it will come back if it still senses water where it shouldn't be. You need drain it then let the water it's sensing dry out. Only then will E1 go away when you cycle power to the dishwasher.
As for why E1 happens, it may be because the dishwasher got overfull because it wasn't draining properly, especially if you tried to run it a few times despite DE/OE. Or it may be there is a leak in a hose or something. If it's just an overflow from not draining properly, then this video could still apply.
@@tetyoonlee4373thanks for this. I just worked on my dishwasher trying to fix the lack of draining issue and now I’m getting a 1E code. However, I’m theorizing that the code may be coming through because in the process my dishwasher got water everywhere in it lol. That would include areas it’s not supposed to be. And there are no leaks underneath currently so hopefully tomorrow the code won’t come back.
Powers on but I have 3 dashes on the display and the dishwasher won’t run.
What model LG dishwasher is this dishwasher ?
lg ldf7551st
So what happens when It is still showing DE and the pump has been replaced?
Does the new drain pump sound like it’s running and you still get the DE? I would disconnect the drain hose and connect it to a wet/dry vac. Turn the vac on, and turn on the Drain feature on the dishwasher.
But first, I would fill the bottom of the dishwasher with about 4 cups of water.
@@chicagohandyman correct it runs and and water moves/drains but it DE in the middle of a cycle. I have tired drawing water from the end of the drain tube and it works but for not every cycle. My thinking is the check valve may be stuck.
And just to be clear, you took out the filter’s and cleaned them as well?
@@chicagohandyman 100% both filters are clean.
I ordered this new pump.. installed it.. and went from barely pumping to nothing at all.. thought it was a bad replacement pump.. ordered a new one and installed again.. same.. nothing at all
Did you check your lines for a blockage?
@@chicagohandyman yes. It almost seems like the pump isn't getting enough power
Same here dishwasher not draining. After replacement it worked fine only for one cycle. In the second cycle the DE error showed up. What to do?
IT’S “OE” error, not “DE”!! (As we all can see in the video.)
DE for Drain Error.
Boom, smoking gun for me!
Glad it helped!
What’s an error code E1 ?
The dishwasher thinks there’s a leak somewhere so it stays in drain mode.
Do you know how to fix? Thank you
@@stevesturdivantnot using it for a few days so it could dry out did the fix for me.
I have another video on my channel to fix a E1 error.
I don't even get a code. Mine fills when it is off
Yeah this is my problem. Just installed don't even use it just always has water in it.
What about E1
That’s a simple fix as well. I’ll upload a video on that this weekend.
This video is here btw. ruclips.net/video/b6p7y5JHR3U/видео.html
Amazon is not a good place to buy drain pumps.
Please share a better place to buy them from. Thanks!
problem solved Amazon ABT72989206 $173.67 Phillips screwdriver and pliers required. Would say I'm unhappy with LG service, but that would imply that they responded and have a service department. They want you to throw it away and buy a new one. I think it's sad the one part LG brags about failed in 2 years regardless if they think it's going to make it 10.