1989 Box Chevy Build Ep.50 Primed Oil System Installed Long Tube Headers And All Sensors ITS READY!!
HTML-код
- Опубликовано: 4 фев 2024
- RUclips!!! In this episode I'll be getting the engine ready for the first start by installing some parts and all the sensors. Got the long tube headers installed after beating them in a few spots for clearance, got all the sensors installed flex plate installed, harmonic balancer, spark plugs, wires, coil packs and even got the engine oil system primed!!! It's Officially a sealed system!!! I'll drop links for parts down below! Next episode ill be installing the Holley Terminator X Max wire harness!! (HOW TO VIDEO!)
STAY TUNED FOR MORE!!!
THANKS FOR WATCHING!!!
Speed Engineering Headers
speed-engineering.com/collect...
LS Engin Swap Oil Pressure Sensor Adapter M16 1.5 Adapter to 1/8 NPT for All GM LS Engines LS1 LSX LS3 4.2L 4.3L 4.8L 5.3L 6.0L 6.2L
www.amazon.com/dp/B0894LDF76?...
Chapin 20075 Disinfectant Bleach Sprayer, 1 Gallon, Made in the USA, Adjustable Cone Nozzle, Compatible with Bleach Solutions and Fungicides, Translucent White
www.amazon.com/dp/B00295QD96?...
U.S. Solid Brass Hose Fitting, Adapter, 1/4" Barb x 1/8" NPT Male Pipe Fitting
www.amazon.com/dp/B07VHH9J3S?...
Lucas Oil Engine Break-In Oil SAE 30, 5 Quart (Pack of 1)
www.amazon.com/dp/B00INXYZH0?...
ACDelco Professional 213-4663 Intake Manifold Temperature Sensor
www.amazon.com/dp/B0049ZDD7O?...
Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX
www.amazon.com/dp/B087JB34VK?...
ATP Flexplates Z-270
www.summitracing.com/parts/AT...
Delphi Camshaft Position Sensors SS11368
www.summitracing.com/parts/DF...
ACDelco GM Genuine Parts Engine Coolant Temperature Sensors 19236568
www.summitracing.com/parts/AD... 
Авто/Мото
You might of already got the info,
But use them for your Dash to tie into the Terminator ECU / Can-Bus. Then you can eliminate using the addl’ senders. I use it on my Chevelle. I have a Supercharged Box too.
Nice ride and great content!
Can’t wait to see the 1st start 🔥
Im caught up!!! Hell yeah!!! Badass build process!!!
Stay putting the work love the dedication love the content Keep It coming watching and learning so much gotta keep the box Chevys alive 💪 keep it coming 👀 🍿
Yea get that holley or aeromotive regulator. If you can please, do a full rundown on the fuel pulp setup with the term x max. Nobody really goes into detail with the setup(ie; what wires to run, relay etc) keep up the great work. I goto the 919 often so linkup sometime gang🔥
Good stuff big dog! Y’all bois motivating me too jump back in the Game!😎
Go for it! it’s never going to get old! i’m enjoying the learning process. Then seeing the outcome is rewarding 💯🦾
Congrats on the oil pressure fam 💯 I’m ready to hear that first heartbeat 🔥🔥🔥
Congrats on your oil pressure fam 💯 I’m ready to hear that first heartbeat 🔥🔥🔥🔥. Can’t wait
Nate you are saving yourself a lot of money 💰 doing it yourself believe that
It's go time💪
My favorite build right here. Everything has been touched.
Your the coldest on RUclips love the video bro
Coming along nice! Try adding a Valve stem to your pump sprayer it will fill up much faster with air 👍
Man!! You’ll tackle anything that comes UP!!💪🏾
Okay big dawg, I see you!! Keep doing what you doing playa, the world’s watching!!
#builtnotbought #northcarolina
Nate, good job on the biuild Keep up the good work.
Rust on the rotor come off while driving
I would wrap the headers in heat wrap for 2 reasons to keep heat down under there and to dampen vibrations later 🫡
They gotta a heat shield that covers the spark plug from the heat
Can’t wait to see this beauty when finished, keep up the good work.
Great job! Keep up the great work!
Thank you! Will do! 💯🦾
Get it started
Next episode! 💯🦾
Go big I see you
Nate, much respect to your abilities and work ethic! Great build, you should be very proud of this Box Chevy !!!!! Been following you since the beginning!
I appreciate that! 💯🦾
Aye Nate good look with the pump sprayer but next time take the plugs out and it'll be easy to turn the engine... I also had that issue with the oil filter just changed the fitting from my stock oil pan and the filter fit
Fellow NC boy here! Hell yea bro! Great work nate! Been watching all the old videos. It’s crazy to see how far you have come with the car!
Appreciate it bro!! 🦾💯 She almost ready!
Bro you have summer rain looking🔥 . I love the series! Pure motivation!
Appreciate it!! 💯🦾
10K is just around the corner 🎉🎉🎉🎉🎉
Yessir!! 💯🦾
It’s go time!
Yessir!!!! 🦾💯
Actually with the holley computer Dakota digital makes an interface that allows you to not have to hardwire every sensor on the engine in
What's up Nate great job keep up the great work 💪💪💪
Yea it's gone be well worth it...I'm loving it
I've been withcha since day 1 big dog 4real I'm proud of you bra
I learn from you how to prime the engine with oil .thanks dude ❤respect 🙏 👏
You’re welcome!! Happy to help!! 💯🦾
❤ it summer rain is coming along make a video of her
Looking good.. keep up the good work
Southside nate proud of you dawg you real motivation
Thanks fam! 🦾💯
I wait on this like a crack head wait for the dope man
I’m waiting on the next hit
Nice job
Thanks!
Yessir!!!!!! 👍🏾 You are a great person, keep up the amazing work and staying humble 💪🏾
I appreciate that! 💯🦾
My boy about to let us hear summer rain bust off🙏🏻
They sell heat resistant sleeves you could put on the spark plug wires works good when you have headers
Well deserved accomplishment bro bro keep up the content keep it going appreciate yah for the DIYr inspiration its been a long time coming
Oh okay then bro I see you
you making me about to take my box Chevy apart and we got the same one
Check lowes, menards, home depot, walmart for the fire extinguishers.. should be by the smoke detectors.. i even got one for the crib. Some fire departments may fill em for free or check em after they expire
Nice
Ls motor looking good 💪🏾💪🏾
Appreciate it!💯🦾
What up Chevy coming out nice
Appreciate it! 💯🦾
Oh man thought this whole video I'm like dam start this Thang I'm so pumped. Anxiety level rising. Great work
Good job ready to see the car on the road
Thanks fam!! i’m ready too! 💯🦾
👏🏿👏🏿👏🏿👏🏿👏🏿
What up big dog I clicked on the video it said you uploaded the video 17s ago 💯
Hope you make Ross car show I wanna see it
🤞🏾
That Mac sensor it's supposed to go in to the intake tube in front of the throttle body and 2 or 3 bar map sensor goes in that hole in the back of the intake and I would put a LS1 steam tube because you're going to have an air pocket in the back of the heads because the back of the motor faces 3 Degrees down I'm surprised you didn't move the motor back a couple of inches did my boys box Caprice love the car good work
Man bro liked the video before it started cuz I know it's gone be 🔥 you give me motivation to do my own box chevy
Appreciate that!! 💯🦾
Try Taylor 51046 spark plug wires. They have a 130° end on them. Should angle up off the headers. Also, would leave starter off until transmission mounted. How u gonna bolt flywheel to converter
Good job my nigga you doing yo thing king !! 💯 💪
Keep it Up 👑‼️💪🏽
Dope content 💪🏽💪🏽
Appreciate it! 💯🦾
🔥🔥💪🏽💪🏽💪🏽
Bro when you wire the mini coop roof up can you make a detailed video on how to wire it? Like what wires are needed and which ones to get rid of. I’m trying to install the same mini coop roof in my bubble and it’s just too many wires for me 🤣
I get it. It’s a clean vibed out whip, but you are going to have to figure out the excessive positive camber. You are going through tires left and right if you don’t.
It was worth the wait you doin a great job 💯
Thanks 💯
Let's go Nate uploaded‼️😎
The top lip on that metal keep it from😊 flexing making flimsy
Yessir summer rain almost done🙏🏾🙏🏾
U the man
Summer rain going to be ready for the summer
Great job making this video.
42:05 😂😂😂
Damn Cletis!! To entertaining!! I know your struggle bro!!
It’s go time!!!!!
Hell yea brother much love from Maryland❤❤❤. That's one hard ass box chevy. U got that bitch right cuz
Blue loctite fly wheel bolts
Pull the spark plugs next time, you're fighting compression trying to rotate the engine to prime it
It's go time baby! 😉✌
Go to the website for the curve in and weld it back how to cut it would be a
🔥 in the hole soon
What size boards did you use to make those wheel stands? I like that... might make me some
2x4s
hey bruh you only need to run one set of sensors to the holley but u need to get a dokota digital EFI interface module part number BIM-01-2-HLLY then the only things you will need for the dash is ur turn signals high and low headlight and fuel gauge. u also will need a holley splitter
Thanks for that information bro i just looked it up and found exactly what i need. I’m about to order it so i’ll have it for the next video!!
www.summitracing.com/parts/dak-bim012hlly?rrec=true
What size engine is this ? Also did you have to change the drive shaft and the differental ? I am new to this and will be redoing my grandma 89 as well just need some info!
Do the headers come with gaskets? If so that would push them out alil father
yep!
You said mat sensor that was iac sensor
Hey brother out of their keep it from flexing bro that s*** going to be kind of like flimsy you should do something to the header
Where u find your ls motor at
Facebook marketplace!
@@SouthSideNate ok bet, I got a 04 gmc envoy I’m finna ls swap in the next few months
Dis bih pressure
Next build get shorty header you want have any problems and you still will get all your horsepower and it’s no wear near your starter no frame no nothing that’s why they get used on a swap
Yay yay i know about the shorties i put them on my obs ls swap. but i wanted long tube headers on my box. check this out i got dirty dingos motor mounts on the box i didn’t even have to beat them all i had to do was move the engine back! 🤦🏾♂️
@@SouthSideNate that’s what up ✌🏾
Seeing the progress is satisfying, keep grindin bro🫡#Itsgotime