Cam swap on a 5.3 Tahoe (free cam giveaway in comments!)
HTML-код
- Опубликовано: 29 сен 2024
- Cam swap on a Ls 5.3 4.8 6.0
Parts links
Chopacobra cam :
www.texas-spee...
Valve springs: Gm high performance.550 lift springs
www.texas-spee...
Ls7 lifters: www.texas-spee...
Lifter trays:
www.texas-spee...
Melling M295 oil pump: Amazon
Gm head bolts and head gaskets:
www.texas-spee...
www.texas-spee...
Car trailer rental: @christianquiroz on Instagram
Tell em I sent you for the deallllls!
Thank you watching and Supporting We appreciate it!
Likes comments shares are all appreciated!
If you like what we do hit that subscribe button!
Instagram: JerryFW_
Twitter: JerryFW_
ruclips.net/video/GqhKprJ60NU/видео.htmlsi=JKbpEWu9uCjYFo8J
Doing a free Chopacobra cam giveaway on my latest video if anyone is interested
Love how we all shared in that OH FUCK moment when the last part of that cam came out. 😂
You hit it on the nail, bro. When I heard. That barren fall in the motor I was like, oh, sshit and he paused for a long time I thought the video froze 😂😂😂😂
Hell yea sounds good bro
He paused and then... lol
What was the part that fell?
@@Giroux68lifter
Bueno jale carnalito te la rifaste 👌
Good work man. Even before tune it ran good and sounded decent good mechanic work.... the tune sounded good too
Sounds great man. Glad the idle control is turned of so it sounds like a CAM and not that retarted simulated blower surge bs on most videos 😂😂
I always wondered what that was. I know what to tell the tuner now when I get mine done
@@badas95Z not a problem I literally just learned that this week and that most tuners leave it on default. That's part of the reason I never went LS lol outside of bone stock daily driver.
I can't stand that forced chop sound you are describing, I build a lot and that's what kids want but I prefer the old school sound like natural cam sound like it used to be when your only control was dizzy and carb vs all the computer tuning. I tune also and can change the cams sound completely with just a few changes on laptop
What was that noise that sounded like something dropped inside the motor when you were taking out the stock cam ?
Ong bro, sounded like a oh crap moment lol
It definitely was a oh crap moment, ended up being my 15mm falling and hitting the oil pan. I thought something fell inside the motor lol
@@jerryfw at least you knew what it was bro lol
@JerryFW I would hate to have been there because I would have been so terrified
@@austinblevins6804 trust me I was but relieved when I found it on the floor 😂
Thanks for the video..sounds great..bout to do a cam n head package, electric fan setup myself..gota figure what cam is good for midrange power...any tips??
Sounds insane bro, congrats on the swap. You made it look so easy lol
What’s the owner Ig??
sucios65
Hey bro im chuck ive been wanting to put a cam in my 2002 chevy suburban ls 1500 what do i have to do to get that cam? Ive been wanting to get one just bills on bills keep stopping me
At least you respect your neighbors when it's night time 👏
Im tryna learn more how to rebuild and swap engines i just need my own garage/space
How much do you charge for this setup
i'm interested as well
Charged $800 for labor
@@jerryfw where are u located ?
In Fort Worth
11:30 this things sick
How much does something like this cost labor and parts included
good work...that engine was dirtier than i what i pull from Junkyards 😂
It honestly was lol, Wasn’t expecting that with the 140k mileage on the cluster
I’m about to order..but which stage cam is it brother??
Texas speed Chopacobra cam 108 lsa
A man full of knowledge.
Did you have to change the oil pump and what source of tuning did you use
I did the same cam swap choice as he did on my Hummer and he does not have to change the oil pump. Why would he need to?
what headers you running?!
I swear Bro people don’t understand the pain of removing and reinstalling a pulley 😭😭😭
its easy asf with the right tools
@@ctkzlopez1457 true but I’m too lazy to get the right tools making it harder for me
Fasho Finna Have You Do My 07 Tahoe 🤟🏾💯
Hey man i’m about to do it and that thing sound super nice exactly how I want it. Do you by any chance know his exact exhaust setup?
It’s speed engineering 1 3/4 headers, adapted to stock Y pipe with a Carven TR muffler
@@jerryfw thanks brother💪🏿
Did u have to replace the torque converter?
You don’t have to it drove fine but if you want the truck to launch quicker I’d recommend it
What all exactly would I need to change out to do this?
You can do it by just buying a cam, valve springs, valve cover, timing cover, and water pump gaskets. Or you can do it like the video with all of that plus head gaskets, head bolts, push rods, oil pump, oil pan gasket, lifters and trays.
@@jerryfw thanks I want to do this to my Tahoe next just didn’t know what all that I will need to do
Was that stage 3 sounds perfect 😊
Do you rebuild motors?
NICE WORK 🔥🔥🔥
Good lord she’s rowdy😳
Where are tou located?
Hey, are u in Atlanta?
Can you put the description link of the cam and other parts you order to install the cam.
Done
Thanks
@@jerryfw I can do it just with a stock 5.3 Tahoe 2002?
@@jesusbecerra789 yes you can but I’d say get headers/intake to get the most out of the cam
where you located cam my yukon!!!
Fort Worth Texas
Shadetree at its finest, lol
Gotta do what you go do lol
Were you located
Damn, that sounds like business!! 🔥
What’s the exhaust setup?
Don’t the it call for LS6 springs?
Yes they got swapped with Texas speed springs which I’m sure are just ls6 ones
Sound nasty asf tho💯😮💨
You know his exhaust set up?
Long tubes with y pipe and a carven R
Good Work Sound Bad A**
How much does this whole install cost
With parts and labor around $1500
What live data and tuning software did you use?
It’s hptuners
Hope I win
Does it make the truck shake im tryina put this cam on my daily driver and i wanna know if it shakes
Yes it does
@@jerryfw pretty bad or some light ?
With all that that you did my brother I don't understand why you just didn't yank the whole engine out that way you could have done everything that you wanted to do I mean you could rent an engine hoist or is this one bought one but I do appreciate what you're doing but I definitely applaud your efforts cuz that's a lot of work dismounting all that stuff in the mounting it back up inside the engine play I take my hat off to you it just sounds great too but next time you going to go that deep man you might just snatch the whole freaking engine out that way that way you can paint the engine and clean it up better you can just get out a few things that you take out the engine you know you discover things that you know you need to correct especially yanking the heads off but I think you did I think you did a wonderful job
I need a swap done how much you charge I have a 1980 landau caprice I’m tryna put a gen v lt motor in a 5.3
I don't take my oil pan off to mess with the oil pump (4WD).
Ma guy quedo perra se podra con 2019 Tahoe tambien
You made it look easy. How much would the labor cost normally?
Dude this sounds sick AF. I regretted doing a cam swap all this time and I just finally ordered all the parts to do the swap. Mines gonna sound killer just like this one and I'm doing it on a suburban
Wow what was that noise cam bearing fell
Good stuff I have 04 Tahoe that's been seating in my yard that needs that
How you charge for something like that?
If your in houston I might need a cam swap boss
Which is better chop a cabra or truck Norris cam
I think the Chopacobra
Truck Norris for that low-mid range. Chopacabra for mid-high
BROOO WARM THE DAMN THING UP ABIT FIRST SHEEEEESSSH
That mf clean clean like its fresh detailed and seats look nice
Can you send me the tune file for this
I didn’t tune this one.
Where are you located any way i can get mine done?
4:30 gentlemen, grab your new cam bearings!
I thought he forgot a lifter and it fell into the block I laughed so hard at the pause I do the same thing😂
So what was it that fell and did it fall in the motor
Sounds sick … cabron👏🏻👏🏻😢
What was that fell pulling the cam out ?
Do you do LS SWAPS on older c10s
Do you notice a difference in power.with those headers&The cam??6.0 Denali Yukon Here plan to do the kit
Big difference in power all around, you’d feel the difference even more in your 6.0
That shift wasn't all too happy.
Do I need a bigger stall?
Shit can you do mine?
Dang funny how you said my neighbor just had a baby, and you didn’t wanna be that guy, but still proceeded lol
😅
Where you located?
Fort Worth Texas
Whats your #?
@@jerryfwdo you do LS SWAPS on c10s
Quick question , do I need a high pressure oil pump ? Or what’s all I need for the cam?
You don’t need to do it but I do recommend it.
Basic cam swap parts are cam, valve springs, valve cover and timing cover gasket.
What's that in spray can?
How much labor cost
Did you change the lifters ? If u did what kind of lifters were they ?
Ls7 lifters from Texas speed
How Much For A Cam Swap?
Ls cam swaps start at $700
@@jerryfw Bet Shoot Me Your Info So I Can Get Up With You
where you located in texas bro
Dfw area
@@jerryfw you got a business page?
@@jerryfw what this job cost? im in dfw looking for this with a tune
@@bigkahuna2297 I'm listening. Moving back to Dallas Tx in a few months
🔥🔥🔥🔥
Does it make you miss the Yukon
Does it make you miss the Yukon
Nah you gotta let it warm up before dropping it into gear
Faaacts buddy! And revving
Good job man
Nice
did u degree the cam?
No sir, never have degreed any cam I’ve installed
@@jerryfw do u have too degree the cam when it a low lift cam?
I’m in Atlanta… Trying to get mine done as well!!! Did you do your work or can you recommend someone???
I do my own and out in the A I got no clue lol
Man .. can we link up!!! I want to get my 09 Tahoe !!!
🔥🔥🔥🔥
it sounds soooo good
What's the duration and lobe separation on this cam?
He showed the cam card.
What mufflers?
Carven not exactly sure what model
Outstanding work Sir! Sounds rowdy
Appreciate it!
Nice keep it up man...great content
@@jerryfw what area are you located sir
Where you from
Dfw Texas
Nice work n where did you learn to be a mechanic? I wish i knew how to swap a cam on a truck😢
No better way to learn than jumping in. Get some tools and try your hand at it
I’m 17 years old and did a cam swap myself on my 2000 5.3 it’s not hard to do
@@Southrn_Maniacyago How badly did it affect milage? I'm thinking about doing a cam swap on my '03 cateye 5.3
@@Mid-Michigan-Outdoors dropped mileage down 3mpg mainly because I had a 226 duration cam and just a street tune.
amazing work 🔥
What brand lifters you use
These were Delphi ls7 lifters but I mainly use summit Ls lifters
@@jerryfw which is cheaper? My lifters are tapping when I hit the high way going like 70 but when I drive around town the tapping goes away at like 40 mph 🤔
@JayyMoney-vr7nv summit ones are cheaper, how’s your oil pressure?
@@jerryfw oil pressure is at like 37 idle and goes up a little driving but not to 40
4:30 what happened😂
What Cam kit did you use on that
Tsp kit
Clean asf 👌🏽
Can you do mines ?😅
Can you mines ?😅
It’s a pipe wrench 🫡 I knew you lied when you said that impact got it off