Excellent video!!! This is the ONLY one of three that I watched that specified the importance of the 3 second count. I can only think that it is that step that made the difference!!! Thank you!!!
The best how-to RUclips video. After unsuccessful following the owner’s manual, got it working at first try following this video. Thank you very much!!
Thank you!!! Finally after reading the manual more than once and the only results was getting frustrated, I found this video and was able to make it work at the first try!!!
I hope you are still providing these learning videos. I just picked up my new 2021 RDX and love it. I’m looking forward to learning more bout all the features. Thanks for this one.
Wow! Your clear video worked great with our 2023 RDX. However, it did not seem to work for our (classic?) 2005 TL. Any advice for the TL? Thanks again for the clarity!
FYI We just purchased a 2017 RDX and the programming instructions didn't work with our Genie 1000 although it works on our 2009 TL. After contacting Homelink we were told that the software on the older remotes doesn't communicate with the newer Acuras. We had to purchase a new Genie remote (thru Amazon) that has software version 2.0.7. Once we received the new remote the programming instructions worked like a charm. So if the lights on your vehicles Homelink system don't blink like the instructions say they should, that should be your first clue. If you call Homelink have your clicker handy to review the model and software versions.
I have a 2015 MDX and have tried several times over the years to program Homelink to our Overhead Door garage opener using the instructions in the owners manual. Tried again today using instructions from Leo as well as one other video. Just cannot get it to work but feel that it has to do with one of two things: 1) The age of our opener (about 1986) which has no Learn button and 2) When using the remote or the button on the garage wall, the button must be pushed twice to activate the door. No idea why this opener needs two pushes of the button; our other Overhead opener does not which works fine with my 2001 Volvo.
Thank you very much for your review. I appreciate it very much I have a 2020 TLX and soon a new rolling code lift master garage door opener. This will help me out. Again thanks.
would have like to know if you know that you already have a roling code can you just start with the learn button instead of using the remote button process
The issue I have is once I've reset homelink 1-3 buttons.. then go to press and hold my remote and button 1.. it doesn flash fast. I can't get past this step. Please help!
Is there a way to re-program the key fob so that you can disable the function that lowers windows and opens the sunroof when you hit unlock button twice. I dont want rain to come in a sunroof that is left open!!
Renting a house and the clicker is lost and you are saying that there is no way to do it without the remote device on Acura TSX ? Then if I order a new clicker it needs to be re program just like the car. Is this is just Acura problem ?
I had no problem programming the Homelink button. My opener has a rolling code, so after programming the Homelink, I lost the code in the clip on remote. I then reprogrammed the clip on, and lost the code in the Homelink
I have a 2003 Acura 3.2TL and a wayne-dalton prodrive 3222c-z garage door opener with an aftermarket KlIK1 clicker. I tried this for 2 hours Yesterday but it didn't work :( Could you please help me out @Courtesy Acura
Excellent video!!! This is the ONLY one of three that I watched that specified the importance of the 3 second count. I can only think that it is that step that made the difference!!! Thank you!!!
The best how-to RUclips video. After unsuccessful following the owner’s manual, got it working at first try following this video. Thank you very much!!
I’m Dave. And I’m addicted to the Acura TL.
I tried for like 6 months on my 2018 MDX and couldn’t figure it out. I followed this video and BOOM got it working on the first try. Thank you!!
Just picked up a 2016 ILX yesterday and found it had Homelink and then found this video! Thanks for walking me through the setup! Worked perfectly.
I have owned my Acura for 5 years and couldn’t find a way to explain this where it worked…. Til you. Thank you!!!!
Thank you so much! Great and clear demonstration and instruction, much better than the manual and other videos I watched.
The second step of linking it with the actual garage door opener itself worked for me! Thanks a bunch!
Thank you!!! Finally after reading the manual more than once and the only results was getting frustrated, I found this video and was able to make it work at the first try!!!
This was so much more helpful than the manual, which skips several key steps! Thank you for doing this!
Thank so much. Your video is the only one that actually helped me. I watched 4 other ones and they were not helpful. You are the best!
You’re Awesome Leo!!! Made it seamless process
Another thank you. Worked great with the learn button. 2005 Acura TL.
Thank you! I just followed your video to setup my home link button in my Acura to program my garage door
Thanks for the help. This was the only video that actually helped me pair my car and garage.
I hope you are still providing these learning videos. I just picked up my new 2021 RDX and love it. I’m looking forward to learning more bout all the features. Thanks for this one.
Just did it on my 2021 rdx too, my garage has a learn and program set button and it was the program set!
holy moly I have looked at so many video’s to do this and none could help me but this helped me on my first try
Me too
Thanks for the help I rested my car and then I followed your instructions until the door closed/opened. I hold it for like 3 seconds and it works!
One shot after I watched your video.
The instructions were pretty clear.
This is it. This is the video that actually breaks it all down.
Wow! Your clear video worked great with our 2023 RDX. However, it did not seem to work for our (classic?) 2005 TL. Any advice for the TL?
Thanks again for the clarity!
Thanks a bunch!! Had to grab the beer cooler to use as a step ladder but your instructions did the trick. Thanks again!!! You are great
Do I have to do the step where I go into the garage and touch the reset button if steps one through two worked
Thank you so much.. you don't know how long I was looking for this
Thanks! Worked exactly as explained on an old garage door
It worked like a charm! I had the rolling code. Thank you!! ❤
It's so helpful. THANK YOU for showing this.
This was a clear, helpful video. Thank you, Leo.
It works man thanks!!! I have a Acura TL 3.2 2003 it I can't believe it works no more garage remote good bye!!!
FYI We just purchased a 2017 RDX and the programming instructions didn't work with our Genie 1000 although it works on our 2009 TL. After contacting Homelink we were told that the software on the older remotes doesn't communicate with the newer Acuras. We had to purchase a new Genie remote (thru Amazon) that has software version 2.0.7. Once we received the new remote the programming instructions worked like a charm. So if the lights on your vehicles Homelink system don't blink like the instructions say they should, that should be your first clue. If you call Homelink have your clicker handy to review the model and software versions.
why is this not working on my 2015 acura TLX😢
Thank you so much. It worked the first try thanks to your help.
Do you happen to have a video on how to program a Acura TLX key fob on a 2016?
From Brighton, co.. thanks. That rolling code is a little more complicated. Got it working on my Honda Pilot now. Thumbs up!
Very helpful thanks for the extra instruction about the rolling code steps, other video don't talk about this
In order to program a second button for a 2 car garage, we don’t reset using I&III buttons again since the first button was already programmed, right?
Does the process work the same with a entry gate to a community?
Thank you!!! I got it my first time trying.
This worked perfect! I had to get out to push the learn button on my Genie and it was easy to do. Thank you!!
do we have to start the engine to do this procedure?
Help! I’ve tried both ways with no luck. Is there anything else I may need to do or that I could be doing wrong?
I have a 2015 MDX and have tried several times over the years to program Homelink to our Overhead Door garage opener using the instructions in the owners manual. Tried again today using instructions from Leo as well as one other video. Just cannot get it to work but feel that it has to do with one of two things: 1) The age of our opener (about 1986) which has no Learn button and 2) When using the remote or the button on the garage wall, the button must be pushed twice to activate the door. No idea why this opener needs two pushes of the button; our other Overhead opener does not which works fine with my 2001 Volvo.
Worked perfectly! Thank you!
Thank you so much in my case the 3rd times worked for me. I’m glad I did it.
Super helpful. Step by step. Thank you.
Just got a 2019 MDX. I have to use the learn button but the homelink never changes to rapid blinking. Cannot figure this out!
Will it reset the rest of the cars that have the code already? If I hit learner button?
Thank you very much for your review. I appreciate it very much I have a 2020 TLX and soon a new rolling code lift master garage door opener. This will help me out. Again thanks.
This was very helpful to me. Thank you.
Thanks for the help took me about 20 seconds to do 🙌
Thanks Leo very clear instructions worked first time ( after 2 Mississippi's :0 ). Gary
would have like to know if you know that you already have a roling code can you just start with the learn button instead of using the remote button process
I am not why it is not working for my 2016 Acura MDX and Liftmaster. Step 2 and step 3 both are not working. Any help plz?
Thank you from MN for the great and clear instructions
It worked perfectly the second step. Thank u sir.
Easy instructions. Worked on my 2019 MDX
Does it require all 3 steps or can it be programmed with just the learn button mode?
Worked on the used rdx I just picked up. Thanks a ton.
The issue I have is once I've reset homelink 1-3 buttons.. then go to press and hold my remote and button 1.. it doesn flash fast. I can't get past this step. Please help!
Thank you Leo. I've had my car for 9 years garage door opener has never been connected to the car. 🤣🤣
Is it the same steps for the 2005 tl. Thanks
Is there a way to re-program the key fob so that you can disable the function that lowers windows and opens the sunroof when you hit unlock button twice. I dont want rain to come in a sunroof that is left open!!
Great lesson Leo. My clicker worked the 1st time.
Great video! Thank you so much!
Worked like a charm!!! THANK YOU!!
You forgot the dress code, do we need a tie too?
This was sooo helpful!!! Thank you!!!
Renting a house and the clicker is lost and you are saying that there is no way to do it without the remote device on Acura TSX ? Then if I order a new clicker it needs to be re program just like the car. Is this is just Acura problem ?
Thanks for the video, worked like a charm
Perfect. Just did our 2015 RDX.
Well explained, thank you.
Finally after 3 months of new ownership of 23 mdx. 😂great job
Awesome! It worked! Lol truly appreciative of this video!
Got mine to work but my garage door will open and then close all by itself, what is going on???
Worked great! Thanks
Thank you. You helped me a lot.
I had no problem programming the Homelink button. My opener has a rolling code, so after programming the Homelink, I lost the code in the clip on remote. I then reprogrammed the clip on, and lost the code in the Homelink
Thanks, Leo...it works now with my 2012 TL.
Thanks I literally got it on my 1st try with this one 💯
Thank you so much! I programmed mine in like 2 minutes.
Worked Great. Thanks
How about if my garage remote dont work, can i still pair my rdx 2009 ?
I have a 2012 ZDX will this work ?
Ayyee! Worked on the 1st step and first try! Thank you!
Thank you so much. The 2nd option worked perfectly.
Worked Perfect 👍🏻 thanks
👍awesome thanks bro from Winnipeg Canada
Nice it worked for me I got 2017 Acura TLX tech
Thank you so much. Just did my TLX.
Done in 30 seconds. Thank you.
This worked perfect, thank you.
Thanks mate. It worked!
Works like magic!!!
I have a 2003 Acura 3.2TL and a wayne-dalton prodrive 3222c-z garage door opener with an aftermarket KlIK1 clicker. I tried this for 2 hours Yesterday but it didn't work :( Could you please help me out @Courtesy Acura
I also have a 2003 TL (and Lift master MyQ with Learn function) and still could not get this working . Any tips you got?
Great instructions. Easy and done
Worked like a charm
Very good video. Thank u
How bout a community gate?
Ty the only guide that worked
It finally worked, thanks.
Thank you, thank you, thank you. Works well for me.