How’s it work if ya want to switch from a Fass 220 to a 165 5g air dog on l5p! When Fass put on tank dropped new draw straw installed ! Will air dog adapt to that ? Thanks Jeff
Grew videos, huge help to install my air dog ll 5G. Does yours shut off ever? Mine continuously runs with the ignition on and the truck not running. Thanks for the feedback💪🛻
I changed my fuel pump on my 2015 diesel duramax to a cp3 after the original cp4 gave out. Do I need to install the air dog? My truck completely turns off all the time, especially when I release the pedal. Good thing is it starts back up. I replaced the complete fuel system. Please help/ advise. Thanks.
You can pretty much reuse already installed parts. Depends on how old they are, I’d replace them though jwmotorsportsco.com/collections/airdog-lift-pump
Jw so I have a 2010 f250 with a 150gph airdog and mine kepts blowing the fuse. Any idea on that. Iv checked everything over and over. And I'm lost. Iv even called airdog them selves and they didn't have a clue.
Not a suggested fix but I’d consider running the fuse tap into a different higher output ignition run fuse. And if not consider running a bigger fuse at your own risk
@@ronniebray6143 the most sketch fix I can think of is either tapping the line into something ignition ran directly without the fuse box and run a fuse in or just keep buying a monthly subscription of fuses Or maybe it’s the actual lift pump itself that’s faulty to a certain degree
Get your airdog here: jwmotorsportsco.com
Looks good on inside of frame
How’s it work if ya want to switch from a Fass 220 to a 165 5g air dog on l5p! When Fass put on tank dropped new draw straw installed ! Will air dog adapt to that ? Thanks
Jeff
sweet
Very curious as why drop drive shaft whenever the video on airdogs channel didn't? Easier access or just because?
It makes it easier for you to get too the fuel line on top of the tank.
Grew videos, huge help to install my air dog ll 5G. Does yours shut off ever? Mine continuously runs with the ignition on and the truck not running. Thanks for the feedback💪🛻
I changed my fuel pump on my 2015 diesel duramax to a cp3 after the original cp4 gave out. Do I need to install the air dog? My truck completely turns off all the time, especially when I release the pedal. Good thing is it starts back up. I replaced the complete fuel system. Please help/ advise. Thanks.
It will help your Cp4 it want have too work hard by pulling fuel from the tank
Wonder if the air dog fits with sb 64 gallon fuel tank, been thinking about buying the air dog but makes me think it’s not going to fit
I wonder the same thing want to get the bigger tank aswell
what happened to the newest video
my 4g gave out this morning can I simply install 5g pump or do I need to run extra stuff
You can pretty much reuse already installed parts. Depends on how old they are, I’d replace them though
jwmotorsportsco.com/collections/airdog-lift-pump
So no need to drop the fuel tank?
Not with airdog
Jw so I have a 2010 f250 with a 150gph airdog and mine kepts blowing the fuse. Any idea on that. Iv checked everything over and over. And I'm lost. Iv even called airdog them selves and they didn't have a clue.
Not a suggested fix but I’d consider running the fuse tap into a different higher output ignition run fuse. And if not consider running a bigger fuse at your own risk
That what I did after the 3rd one of the 20amp that it calls for. Then I put in a 30amp it blew that just as easy.
@@ronniebray6143 the most sketch fix I can think of is either tapping the line into something ignition ran directly without the fuse box and run a fuse in or just keep buying a monthly subscription of fuses
Or maybe it’s the actual lift pump itself that’s faulty to a certain degree
@rhydershepherd8179
Thank you and thats what I'm think I'm gonna do is probably break down and buy another pump
Is this a old video? Like recorded last year ? You guys are wearing jackets in Georgia
No, it was cold yesterday! Lol jk this was earlier this year