maybe for those who wondering how much the truck engine weight. although the engine size , and the 'look' on Lada pretty much explain how heavy the truck engine is.. 😄
Given that in a *modern* car (with stock engine) the difference between having a 100kg total driver and passenger and a 150kg total driver and passenger is very noticeable on the suspension, having 330kg of extra engine certainly will make a difference.....
Looking at it that way, true. But the simple fact is, 330 extra kg over those 2 little tiny tyres is a LOT of extra mass.... Certainly WAY over the safe loading limit of the tyres. That car would have a max payload of around 250kg. Therefore the engine would make it overweight even with NO driver and NO fuel!
that would be pretty funny if they went that route lol. I still think if they went this far with it make it into an off road beast! put some military axles on it and big off road tires it'll go anywhere they put it!
They're not necessarily Soviet era. The 2104, 2105, 2106 and 2107 were made well into the 2000's, and even a mid-2000's car might look like it's 30-40 years old.
Rotary into Corvette? Loads of vids, over a month of work, everything seems to be a trouble. 7 litre ZIŁ engine into lada? One video and engine installed, wired up and fired up in the car. Russians are engineering gods.
Lol. I rather sit in a rusty 1500 with the original engine than this shitty V8 what is did to the views. And the Corvette will be a weapon altough this will be aaaan engine with 4 wheels.....
@@CMDRSweeper you are correct, sir. Back in the day we started by translating Best Motoring vids to Russian (I actually wasn't part of the team back then, I joined a bit later), hence the name.
OK, so It's a 7.0l truck engine with a Lada car around it. It has been assimilated. In 'Merica we call that a sleeper. You guys are master shadetree mechanics. Awesome work.
I thank God for You. Since I was a kid, I was always wondering what would be like to swap truck engine into the car, and now thanks to You, You make my kid dream come true. Thank You Garage 54 You are the best! :)
When I want to watch a quality build I go to the Skid Factory... when I want to have a laugh and be amazed that it works at all I come here. You guys are insane! Love your channel!!!
Awesome!! "Thumbs up or down I don't care..." Best attitude ever, you guys rock! We do stuff like this in the US, but it's hard to get ahold of tank engines... Thanks for the videos, cheers!!
what madness! with that engine it is not necessary to lower the suspension. I would put the battery in the trunk so that the weight distribution is 50%. And I would also make a small hole in the hood lid or it will not close. 😂😂
Brilliant concept fellas, combined with great voice over translation and cool garage crew.. turns it to an epic show. You can always count on the Russian if you're like extreme and crazy stuff. No pain, no gain right?, whatever it takes. Awesome
The lada with 38-inch tires way we modify it we changed rear axle wider one and put off racing knocks long travel shocks and steering racks. you have a monster car.
Am I the only one who appreciates how much time and effort goes in to the videos never mind the time edited the real life time it took to do this engine swap everything involved and the editing time of the video to make this content ❤️❤️❤️
Make a nice custom hood cowl by reinforcing the inside of the hood with a metal template (the cut-off bottom of a turkey baking pan) which you spot weld on. Then cut out the shape in the hood. Cut one side off the remaining rimless turkey baking pan remnant and face it toward the windshield to fit it. Attach tabs from the remnant to the motor. Spraypaint all pieces white.
I think you should try to save the hood as much as possible. Weld up pipes for the manifolds and have them come up through the hood like we do on American tractor pull trucks. Either cut out a hole for the air cleaner or build your own huge scoop over it from sheet metal. Radiator can sit where the back seat was with electric fans, run metal tube for coolant with rubber flex hose for engine and radiator connections.. Widen the rear rims, that Lada will look like a sweet drag car, it looks mean already. I'm really liking this one guys! :) Hello from Texas!
@@BreakTheWicked I take it you've never been to upstate NY... 2 million people upstate NY... With a million of that in Rochester buffalo and Syracuse... Leaves a population density that of probably Wyoming 😂
Filling the tyres with concrete should stiffen them up a touch
you made me laugh so much LOOL
Better not leave the car sitting on that wheels when concrete sets. Or it will be rough ride 😃
That was the first ever Garage54 video I've seen. Had so much fun since then. :D
Lmfao
Where have I seen that before?
54: I need a new engine for my Lada.
Junk yard: All we have is this truck en...
54: yes
Brandon Caldwell u killed me right there 😂😂😂
You mean
54: Da
@@bmwf10lci Na, not as good.
😂😂😂😂dead
@@ryanriddell9314 54: Da, davayte
“The stock engine weighs approximately 120 kilos while this one is about 450, that’s not that big of a difference” 😂😂
maybe for those who wondering how much the truck engine weight. although the engine size , and the 'look' on Lada pretty much explain how heavy the truck engine is.. 😄
Given that in a *modern* car (with stock engine) the difference between having a 100kg total driver and passenger and a 150kg total driver and passenger is very noticeable on the suspension, having 330kg of extra engine certainly will make a difference.....
Idk, considering how much more torque it can produce (maybe even more power compared to an old Lada engine), i would say it isn't much.
Looking at it that way, true.
But the simple fact is, 330 extra kg over those 2 little tiny tyres is a LOT of extra mass....
Certainly WAY over the safe loading limit of the tyres.
That car would have a max payload of around 250kg. Therefore the engine would make it overweight even with NO driver and NO fuel!
You guys are funny. I routinely drive around with about 500lbs in my trunk, and I have a two door. A kg is about 2.2lbs.
Offtopic: This is the best sounding English i ever heard in a Russian video. Your translator is worth his weight in gold : )
and with his Russian accent haha
2 weeks later: “Adding a third 7-liter truck engine onto our Lada” 😜
YES. This must happen!
best prediction comment I have seen here x'D
that would be pretty funny if they went that route lol. I still think if they went this far with it make it into an off road beast! put some military axles on it and big off road tires it'll go anywhere they put it!
Might be a bit nose-heavy........😁😁😁😁😁😁
21 liter displacement... lol what could possibly go wrong?
looks more like "adding a Lada into a 7 Liter Truck Engine" :D
People add k20's to their turbo
@JONOTron zil*
Garage 54 is responsible for the death of half of the Soviet era Ladas in Russia.
been thinking about it too.. lol
DAMMIT!!!!......Garage 54...."Soviet lada Murderers!!!!"....
Anything that kills the image of the dark days of communism is a benefit tbh. Things like this wouldn't have happened in the days of the USSR
Facts
They're not necessarily Soviet era. The 2104, 2105, 2106 and 2107 were made well into the 2000's, and even a mid-2000's car might look like it's 30-40 years old.
Rotary into Corvette? Loads of vids, over a month of work, everything seems to be a trouble.
7 litre ZIŁ engine into lada? One video and engine installed, wired up and fired up in the car.
Russians are engineering gods.
XStuntManiac I just came from the rotary corvette vids!
@@timrattenbury5321 Same lmfao
Also in this video he's over doubling the power of the car, the rotary corvette has half the power as before
Because Russians aren't pussies looking for attention they just get shit done!
Lol. I rather sit in a rusty 1500 with the original engine than this shitty V8 what is did to the views. And the Corvette will be a weapon altough this will be aaaan engine with 4 wheels.....
I bet this translator has learnt how to build a full car by doing these vids
I've actually been a car guy for pretty much all of my life.
@@SwapBlogRU lol
@@SwapBlogRU Nice channel :)
@@SwapBlogRU Now... I suspect the BMIRussian may be inspired by Best Motoring International? :D
@@CMDRSweeper you are correct, sir. Back in the day we started by translating Best Motoring vids to Russian (I actually wasn't part of the team back then, I joined a bit later), hence the name.
next episode: putting a 1.3 litre lada engine in a truck.
Barely getting to 30 mph with the engine screaming.
I would imagine it would either explode because too much power or it’s screaming bloody murder hitting 30 like the comment above lol
They actually did that 😂😂
Americans
-2Jz swap/ RB swap
Russians
-*Hold my kvass*
That engine is kinda like old american v8 made by soviets
My friend put a 702 ci. In a 68 Chevy truck
That's a V12 11.5L GMC engine
@GM Kof hard no it was supposed to be part of my other comment don't know how it got split up into two comments 😂
Nah this is more like the equivalent of an ls swap
Everyone: no dude, you can't swap an 2JZ into a cinquecento, there isn't enough room
Garage 54:
DrathVader and then deboss garage walks in with a 4 rotor gokart xd
Good example, but why would you put a 2JZ in a small Fiat?
@@TopGear25S why not?
@@bubbab89 ruclips.net/video/GH2uwjk3fqM/видео.html
I have fiat 126 bis I think swap the engine I will send my car to this dudes LOL
when she tells you it won't fit... just show her this video
@D.O.A. I only have one and one will do the job.
That won't be a problem 😏
From my couch , i can confirm oil pressure is sufficient .
It's a Lada wrap around a truck engine.
Drag Lada:)
Not a Lada room for that engine.
Nothing like a little 90/10 weight distribution.
Lol
You go ahead and calculate the distribution of weight on that amazing creation
Fantastic burnouts
Fucker probably does a wheelie in reverse
Cut the firewall out, take out the front seats, extend the steering and pedals and drive it from the back seat.
No, but they will put driver seat on the roof.. 😁
@@pebri427 better yet, bolt a.couch on the roof and steer from there 😎
*Test fitting the engine*
Lada: GET THAT THING OFF ME!!
*After sucessful conversion*
Lada: I have become death... destroyer of worlds.
I can"t wait for Inline 14l 2 truck engine lada.
"inline 14l" that's a V8
@@jm036 Wtf, no
That would count as V16...
@@EdvaE39 a inline with one cylinder could be 14 liters. Displacement doesn't change cylinder number
@@_Anthony___ is it technically inline if it only has 1 cylinder? :-D
10:44
Slav: Aaaaagh
Translator: What the hell was that?
So accurate 😂
so true :DD
- Has loose 7.0L truck engine resting lopsided in the engine bay of a Lada
- "This is really starting to get interesting!"
Saphire Throated Carpenter Ant still trying figure out where the trans case going. Or is that going to be the new drivers chair 😂
992lb engine and trans.
That's a heavy combo!
How about a motorbike engine on each axle?
In my town there is fiat 126p with 600cc hayabusa engine, it goes like crazy
@@fila1445 hayabusa is not 600cc
@@Stropitor my bad it was from cbr600, Google tor Kielce 126p 600cbr
@@fila1445 In my country that is highly illegal!
@@DG_427 yer country must be led by dimwhitted pussyfootin mofos.
You have some space left in the back, add a 8.3l Dodge viper engine 😂
I'm from Poland and i like watch yours projects, big hand up.
"How much pulling power do you need?"
"Well, I've got a Lada, so only enough for a small trailer or something"
"Leave it with me"
Vlad, no!
they got me good when the engine squirt for the second time lol
Local warning
lmfao! me too! I was like "ok, so this is gonna be like an episode of Looney Tunes"
Shit that's alada work
**It's like watching porn**..that car can't take anything bigger than that.
Big Black Truck Engine vs. tiny white virgin lada
Hold my beer!
@@RaptorTroll360 interracial😂😂
@@zaraak323i 😆
Small white box gets big Russian load
That's a lada engine. *ba dum tss
So terrible it deserved a thumbs up (I'm actually just jealous I didn't think of it first :p)!
Punny. Haha xD
The sound, the vibrations and fire from the exhaust are very cool
I love these videos, the guys a legend and he's even filmed it in the correct aspect ratio, nice
They have better cinematography in this tiny Russian garage in the middle of nowhere than a lot of movies do.
Front suspension and rear drive axle: am i a joke to you
OK, so It's a 7.0l truck engine with a Lada car around it.
It has been assimilated. In 'Merica we call that a sleeper.
You guys are master shadetree mechanics. Awesome work.
I thank God for You. Since I was a kid, I was always wondering what would be like to swap truck engine into the car, and now thanks to You, You make my kid dream come true. Thank You Garage 54 You are the best! :)
Strips of old tire rubber as motor mounts. Genius.
That's a Lada DIY classic actually!
The work these guys can do is incredible!
You might hear the oilsyclone spinning on the top of the engine and If so, you're god to go 🙏
This channel keeps popping up in my feed. It's the ultimate 'what if' car channel. I love it.
I looked up the specs for the engine 6.95 liters with 6.5-1 compression. It’s glorious
You guys don't do engine conversions, you do engine mutations.
Classic😂🤣
When I want to watch a quality build I go to the Skid Factory... when I want to have a laugh and be amazed that it works at all I come here. You guys are insane! Love your channel!!!
If they put on slicks it’ll grenade that rear end in a jiffy.
just love the strange things you do with cars, cant stop watching your videos, so entertaining.
Now drop a Cat 797F engine in the Lada
Cut off Lada hood, roof and fender, attach to engine. Still larger than Lada car. I like it!
Ford Mustang: I love losing control and taking out crowds of people.
Lada: Hold my Vodka
Lada: ... I am ready to kill everything that moves.
They should make the exhaust come from under the fenders, hood or side!
Upside down headers demolition derby style !
exhaust goes directly into cabin
Awesome!! "Thumbs up or down I don't care..." Best attitude ever, you guys rock! We do stuff like this in the US, but it's hard to get ahold of tank engines... Thanks for the videos, cheers!!
This is the type of content I signed up on this thing for... 👍
Im from the US ,love cars ...but never heard of a lada until i saw your videos.
The first gearbox would have been perfect! Imagine the explosive destruction when it went!
8:47 Where do you think you're going?
9:49 Alright, we have another geyser.
Those mechanics are insane and funny at the same time. Huge respect. 🔥
Hello from Australia, enjoying your insane channel... :)
Hay mate wanna bear
Blistikmoo no but ill have a beer
This would be the best garage to work at for apprentice. they get real hands-on experience.
what madness! with that engine it is not necessary to lower the suspension. I would put the battery in the trunk so that the weight distribution is 50%. And I would also make a small hole in the hood lid or it will not close. 😂😂
I would put the driver in the trunk to get that perfect weight distribution. Bet it turns 9's in the quarter
Nope, remember the first Police Academy. Bubba Smith just took the front seat out. That would definitely give you the 50/50 you are after.
That exhaust system looks great as is. The flames are a nice touch. Keep that.
Brilliant concept fellas, combined with great voice over translation and cool garage crew.. turns it to an epic show. You can always count on the Russian if you're like extreme and crazy stuff. No pain, no gain right?, whatever it takes. Awesome
The lada with 38-inch tires way we modify it we changed rear axle wider one and put off racing knocks long travel shocks and steering racks. you have a monster car.
Its like fitting M249 Mag in Uzi
Understandable lol
love that the owner is not too proud and admits when he is not knowing everything!
3:24 See, fits perfect ;-)
I love your channel! Thanks for always having an english translator! No matter what, I'll still watch your channel!
Am I the only one who appreciates how much time and effort goes in to the videos never mind the time edited the real life time it took to do this engine swap everything involved and the editing time of the video to make this content ❤️❤️❤️
i agree with other posters KEEP THE SAME TRANSLATOR GUY whatever you do,,,,,,,,he is part of the chemistry that makes these videos so enjoyable
the hold my beer equivalent of sloppy mechanic engine swaps
Old Tyre for an engine mount bush. Really Genius idea.
next video: Putting Two 7-liter Truck Engines into Lada
Shhhhhhhh don’t give him any ideas
Giving "the long drive" vibes. And I'm here for it
UP NEXT:
Swapping T-34-85 tank V12 engine into a Lada
Hold my vodka
The lada is one of my favourite cars, as they made so many of them, it is cool to see what can be done!
"give us a thumbs up or thumbs down" lmao love u guys
You guys are smart and super technical. Keep doing it. Japanese motors are available in my country but nothing Russian.
it'll be fiiiiine....... dam near pissed my self laughing watching this. remembering all the crazy swaps ive done. like 572 ci into a stock s10 pickup
Still got it?
Make a nice custom hood cowl by reinforcing the inside of the hood with a metal template (the cut-off bottom of a turkey baking pan) which you spot weld on. Then cut out the shape in the hood. Cut one side off the remaining rimless turkey baking pan remnant and face it toward the windshield to fit it. Attach tabs from the remnant to the motor. Spraypaint all pieces white.
"MOOOOOM! The crazy Russian man is doing crazy Russian things again!" 😫
I think you should try to save the hood as much as possible. Weld up pipes for the manifolds and have them come up through the hood like we do on American tractor pull trucks. Either cut out a hole for the air cleaner or build your own huge scoop over it from sheet metal. Radiator can sit where the back seat was with electric fans, run metal tube for coolant with rubber flex hose for engine and radiator connections.. Widen the rear rims, that Lada will look like a sweet drag car, it looks mean already. I'm really liking this one guys! :) Hello from Texas!
A GM 350 V8 should fit into the Lada’s engine bay.
Would look rather nice too, or a 454 probably a little smaller than that truck engine they have
@@ce5243 a 454 is like 7.4 litres lol
It's great to have the translation. Awesome project guys! It's been great fun to see it.
Next Lada engine in truck?
maybe as a starter...
Absolutely love these guys. Complete opposite to all the expensive stuff.
I love the Russian make it work attitude!
you are a brilliant man, I would consider you a genius even as many would not put you that high.
I forgot there are parts of the world that dont do LS engine swaps
Ikr
“so we good, yeah” 😅😅😅🙏 love your work
8:54 "Aaahhh" Translation: What the hell?
Translating Russian is a mystical, magical artform.
The what the hell its probably what the dude who got the oil in the face said
You crazy Ruski's!!!!! Love watching the whacky stuff you guys do! Love from Australia!
You guys are amazing well done love this channel.👍🇬🇧🍺
You are fortunate to have the time and material to do these neat projects ! Very interesting,Thank You for a great vid !
Hell yeah, that's a Russian Hotrod.
How is this channel not more popular than it is
“Hey there fellas. We actually didn’t do an LS swap in our Lada.”
Right?! probably the only 'modern' non LS gasoline V8 swap in a long time!
That would be great. I was born in New Zealand but my Great Grand parents came from Russia. So I love these guys.
How to lower the suspension in 2019 in your car... Just install engine from the truck :P
Awesome. No wonder you guys were first in space! 👍⭐⭐⭐⭐⭐
My 5yo child said "it's ambitious but rubbish like Top Gear"
One word:
Disown
A 5 yo wouldn't say that
.......your 5 year old child doesnt know the word "ambitious" 🤣 quit your bullshit.
I love how "engine" and "motor" are used interchangeably. Just the way it was intended (in this type of context).
Now install a motobike engine into a truck
I’m very late, but there’s a lawnmower engine in a pickup truck here on RUclips
@@nbain66 Are you meaning a 212cc Predator engine? Or an actual lawn mower engine swap?
@@desertrat1357 that would be funny, 5.5hp Briggs and Stratton.
Hey soviet car specialists (so called). The thing making noise is a centrifugal oil filter. It is spinning long time after the switch off.
*Swapping a Lada Body to 7 litre truck engine!*
Vlad is a type of guy who would start a car even though it's already started *haha*
How much to get this thing shipped to new York 😂😂
East coast is too crowded. Have it shipped to one of the six western states where you can really open it up.
@@BreakTheWicked I take it you've never been to upstate NY... 2 million people upstate NY... With a million of that in Rochester buffalo and Syracuse... Leaves a population density that of probably Wyoming 😂
Best project yet. Im thrilled. Rock on!