What is amazing to me is that these guys are making some an incredibly smart product in a simple garage. No question that they are very bright engineers and work with whatever they have at hand. I commend you!
It looks like you would just be able to flip the wheel around as well, no major engineering to fix this. Maybe the car was too unbalanced with them out of phase?
@@RustyCraftKnife That's my thought. I'm also thinking with the way it walks that this would double the speed but also double the amount of strain on each leg. This way there's always two legs firmly on the ground
15:07 it's because this type of walking system is supposed to work with the leg of the same axle 180° degree apart in the rotation (with the eventually front legs at the same 180° degree "distance" but swapped, if the rear in in the rear position on 0° the forn thave to be on 180°, same in the rear, if left is 180° in rotation right have to be at 0°, sorry for the bad english, i'm italian >
It's also meant to have many sets of legs, all offset from one another by some amount. No matter if the legs are 180 degrees offset or not, I don't think two legs would ever work quite right.
I don’t know what substances the authors of the video use to raise their creative level, but they do not cease to amaze in every new video! This is just fantastic!
If i remember correctly, they run smoothly when you are having sets of 3 pairs of legs per side, that way always one is moving linear at any time given.
I love you guys.. im in america. California in fact.. Oakland. Been watching you guys for about 18 months... awsome and creative. I try to watch every episode. Keep it up!!!
that forester in the intro scene has the slimline OEM wind deflectors on it, they're rare as hens teeth in the aus market and these guys just have them laying around hahaha
You guys have excelled yourselves this time. This a serious engineering challenge that many have failed at including the military and you have managed it in 3 days! RESPECT!
You have to offset the timing on the legs to walk forward smoothly. Try moving the wheel studs over one hole, on one side. This will help it walk better and put far less stress on the parts. As long as you don't have to turn, you could probably make it 4X4 or even 6X6 by transferring the power between the "wheels" the same way they do on a locomotive. Just mount more legs and connect them with steel rods. Crazy, but it might work.
You guys are so awesome. This is the wildest concept you have explored. I think you need another set of legs on the front or maybe put a huge lift and a straight axle under the front to lift it up. Great video keep up the good work.
You've just invented the first autonomous walking Lada. That's weird thing to say, but yea..cool! Btw I think if you lift the front tires to level the car, it will move better, not like back and front like in this video.
I remember when Vlad did all his own stuff. We liked the personable Vlad making fun from workaday junk, maybe even stuff we could do ourselves (wooden pistons, anyone?). It was uplifting to see how the ordinary could be made fun (20 kilos of lead in wheels) and vicariously explore beautiful Russia. As the channel grows it's becoming more and more like everything else that's out there.
Those legs need a third offset to counter some of that roleback, plus the the legs need some ability to counter turn to prevent snapping. But that is cool, engineering is the ultimate universal languange and it aamazing to see crazy stuff built in other countries. Can"t wait to see more.
Hey fellas, cool lada. Keep it up. Both legs step at the same time, try asynchronical. As in left-right left-right. That might help with that little backdrag. And deffo raise the front end. But eventually make it a centipede.
You should try making this a three wheel car using a motorcycle on the back as your powertrain, and the two front wheels to steer the car. You guys are Awesome keep up the good work!
I have a feeling like this is gonna be in everyone's recommended in 7 years
The future is here, old man...
Seriously and im going to be in the comment 🤪-Future me
Ikr
I'm in
110%
What is amazing to me is that these guys are making some an incredibly smart product in a simple garage. No question that they are very bright engineers and work with whatever they have at hand. I commend you!
4:38 Is it me, or is that… Russian CNC using a real hand instead of a computer controlled thing?
ah, it's not a real hand, the dude is a cyborg)
As a CNC operator, I don't get that, at all.
HNC - Hand Numerical Control 😀
@@YeshuaDisciple916 my guess is there was something loose and he was holding it in place
I laughed way too hard at this man. Thank you
Boston Dynamics Russian style!
Vostok Dynamics
@@MyFavoriteDisease Funny!
@@MyFavoriteDisease восток динамика - Lol!
diesel powered robots!!!
Everything’s better Russian 😂
They need to lift the front end, the height is giving the legs trouble.
Nope. The frame of the legs was built parallel to the road. Not the car.
And the fact that the rear of the legs retracts too much and it gives way and moves backwards.
Make it ALW (All Leg Walk)
*Milk Man* unfortunately you won’t be able to steer :(
Rear leg are to long
15:02 "it's squatting" - then you know you're in Russia when the Ladas start squatting
Literally searched for this comment XD
Gopnik Lada :D
Gopnik Lada :D
It’s Blyatiful! Lmao
Гопник Лада😁
it should be alternate...
those 2 legs should be 180 degrees out of phase...
It looks like you would just be able to flip the wheel around as well, no major engineering to fix this.
Maybe the car was too unbalanced with them out of phase?
Yep, exactly. One of the crank needs to attach to the top of the rim while the other attaches to the bottom.
@@RustyCraftKnife That's my thought. I'm also thinking with the way it walks that this would double the speed but also double the amount of strain on each leg. This way there's always two legs firmly on the ground
That would make the car move at least 2 times faster
180 degree rim attachments will not work.. with rotation, the moving parts of the two legs will hit each-other and get stuck.
Garage 54: The official Channel of "Meanwhile in Russia..."
I love these guys , they’re hilarious
In soviet russia, car walks you
lol
Everytime when someone brings his lada to garage 54
«hey there fellas...»
It's STILL funny.
They're good fellas!👌😎👍
This guy builds the stuff I think about when I can’t sleep
Boston dynamics need to learn from these guys!
Boston dynamics are way ahead of this...
Look up Theo Jansen
That's like saying that BMW need to learn from Dacia, like WTF!
@@alexanderthevoice Boston Dynamics has way more US dollars than these guys have in Rubles.
Look up strandbeest, this mechanism originally comes from a wind powered walker thingy
What sort of top speed is this thing capable of?
However fast we're able to go.
Pretty much the definition of top speed.
15:07 it's because this type of walking system is supposed to work with the leg of the same axle 180° degree apart in the rotation (with the eventually front legs at the same 180° degree "distance" but swapped, if the rear in in the rear position on 0° the forn thave to be on 180°, same in the rear, if left is 180° in rotation right have to be at 0°, sorry for the bad english, i'm italian >
It's also meant to have many sets of legs, all offset from one another by some amount. No matter if the legs are 180 degrees offset or not, I don't think two legs would ever work quite right.
Ehy
The car wasn't parralell to the ground.
Apple dictionary cannot spell parrallel .
Pietro M parallel
@@tripplefives1402 they welded the diff
*This is research and development for future mech devices. Garage 54 is on the forefront*
Slav engenering on its finest👌😆
when you think they can't do anything more weird, they drop this..
I don’t know what substances the authors of the video use to raise their creative level, but they do not cease to amaze in every new video! This is just fantastic!
Traditionally I would assume Vodka.
gasoline drained from old ladas, soviet quality
Vision powder.
One step forward...two steps back. Welcome to the world of innovation. Even if it didn't work, it looked awesome on the hoist.
No way I can afford a Boston Dynamics robot, but what the heck, the very affordable Lada based one is cooler anyway.
My respect ..........this kind of people make youtube fantastic.......Good luck....
If i remember correctly, they run smoothly when you are having sets of 3 pairs of legs per side, that way always one is moving linear at any time given.
Correct. I've built one, just a few 100 times smaller :)
Crazy 😅
The more you watch these videos the more you want to buy a Lada. Just too cute.
Wild Wild West Lada, cool!
1900: we will have flying cars in the future.
2020:
This is better.
If there is a real need for the flying car it would be there since 70s!
Commie Goose correct. Russians always beat everyone else to it.
We have walking car
@@AbdurrahmanAllahem your prophet fly on his donkey so why not
Yes the 8 leg drive version would be great !
on lada niva 4x4 or uaz
Hello from Canada. We have so much fun watching you and your friends making fun things. We wish you lots of Love.
Garage 54 next month: "Caterpillar-movement Lada".
ruclips.net/video/VrQDfs8qIQQ/видео.html
@@Kalugaved
ты легендаo
ruclips.net/video/iA0gggfQaKA/видео.html
The Ladapillar
"Don't drill into this beautifully made Lada!" Said no one, Ever.
id love to see a homemade Russian tank
Look up russian tanks from WW1.
Haha, a custom russian tank with 4 lada engines
Yess the Lada Tank!
They already covered the country in ladas .
Look on the Academeg channel, they have a sorta homemade Bentley tank
Now that is some bloody clever engineering I have to say!! 👍👍
Bearings and a shit-load of washers would be a massive help.
It's Russia after all
It needs another set of legs on each side, mounted half a cycle compared to the first set. That would support it better in between each stride.
I love how all people have the same voice dub but just with a different tone
I see I'm not the only one who noticed that.
I love you guys.. im in america. California in fact.. Oakland. Been watching you guys for about 18 months... awsome and creative. I try to watch every episode. Keep it up!!!
You need to separate the two legs on each side and offset so they take turns stepping. :)
that forester in the intro scene has the slimline OEM wind deflectors on it, they're rare as hens teeth in the aus market and these guys just have them laying around hahaha
The last thing you want to hear when leaving the mechanic:
"Hey there fellas"
You guys have excelled yourselves this time. This a serious engineering challenge that many have failed at including the military and you have managed it in 3 days! RESPECT!
We are living in 2020, while they are living in 2120 :D
and driving a lada 2105
@@Digidi4 It's a 2107
Best video I've seen in a while. Keep this project going
Yesterday I found a walking bicycle video... today a walking car... tomorrow I hope to find a walking plane
I hope to see a flying cow. 🐄🤣
One small step for a car, and a leap for the automotive industry!!
Boston Dynamics: we domain legs on machines
Garage 54: hold my beer
In terms of work put in to produce a video, this channel is prob. in the top 3 of all YT channels
Imagine sending your car in for a service and while you're walking out you hear a sudden voice in the background..."heya fellas"
Yall have lada engines lying around like we have LS engines lying around here in America
"Hello comrade. I need more steel"
"What for?"
"......um.... weapons"
You guys are geniuses. Awesome job.
First time that guy looks like thinking "what the f we are doing? "
Bystanders were like, "walking car??? Oi blin no more vodka" 😂😂😂
Now we just await the invasion of walking Ladas. We wont stand a chance!
The feet needing to be off the ground don't clear the ground enough. If there was a way to retract the legs on the lift would make it better.
That car looks so small with you standing next to it. LOL
well tbf it is a really small car
You have to offset the timing on the legs to walk forward smoothly.
Try moving the wheel studs over one hole, on one side.
This will help it walk better and put far less stress on the parts.
As long as you don't have to turn, you could probably make it 4X4 or even 6X6 by transferring the power between the "wheels" the same way they do on a locomotive.
Just mount more legs and connect them with steel rods. Crazy, but it might work.
*NOTHING CAN STOP A LADA*
even his handbrake can't stop it
My mechanic friend and I want to see Garage 54 dealerships in the future.
Start designing cars guys, we reckon you have it in you.
This isn't what I had in my mind when you tell me it's a 4x4
People before 2000: In the 21st century cars will fly.
Garage 54:
Oh snap it's Billy.... He's gonna invest for sure.
spider lada spider lada
Holy shit Garage 54 made a fucking STRANDBEEST lada!! I love you guys. Never ever stop.
Ooh strandbeast legs
This! Also they should add way more legs like that
I too am reminded Theo Jansen
It's crazy experiments like this is why I subscribed to this channel. You guys are crazy geniuses. Lol. Keep it up.
19:43 Looks like a Juan Manuel Fangio! :D
You guys deserve way more subscribers
Imagine 4wheel drive with that. All four wheels with these on all four corners
You guys are so awesome. This is the wildest concept you have explored. I think you need another set of legs on the front or maybe put a huge lift and a straight axle under the front to lift it up. Great video keep up the good work.
Little bit of smoke after a million miles on russian winter roads.
Amazing collaboration, hope to see more of these!
Legend says this thing walks by itself every night
5520 years after the invention of the wheel we are finally revisiting our ancestors. :D
dang imagine driving up to a girls house with that thing!
She would get wet
Or super old by the time you get there...
"Honey I ran out of gas. Can you pick me up?"
By the time you got to her house she divorced the third time, having 10 kids and still curse the skin out of you for being late, very late.
It hurts to watch but i couldn't look away. I'd say this was a 150% success.
He just said screw the questions, and started ghost riding.
You've just invented the first autonomous walking Lada. That's weird thing to say, but yea..cool! Btw I think if you lift the front tires to level the car, it will move better, not like back and front like in this video.
man if i did not find your channel, would not have started a channel🙏😃
I've already seen you in comments, we Watch the same videos
@@pietrom2642 thats awesome man🙌😃
That was one impressive godzilla just yet to be perfected. I can't wait to see the next improvement 😃
My Russian isn’t that good, but I’m pretty sure he didn’t say “what’s up g” lol
yes in russian there are no words "what’s up g".
hah, that's a wonderful implementation of strande-beest legs
Damnnn, imagine seeing this on the street lmao
Love the crazy things you guys come up with.
This looks like something out of cyberpunk 🤣
If even Garage 54 thinks your car mod is nuts, you're doing something right!
you know you're early when youtube says the video got no views
They are all completely mad and brilliant. Nice to see the youngsters doing good work
It's called a Stradbeast!
Strandbeest, from the dutchman Theo Jansen ;-)
“Limp My Ride” 🤣
Imagine if you were tripping on acid, mushrooms, DMT or somethng and this thing drove around the corner
* walked * around the corner.. 😉
I remember when Vlad did all his own stuff. We liked the personable Vlad making fun from workaday junk, maybe even stuff we could do ourselves (wooden pistons, anyone?). It was uplifting to see how the ordinary could be made fun (20 kilos of lead in wheels) and vicariously explore beautiful Russia. As the channel grows it's becoming more and more like everything else that's out there.
Try building a formula 1 car next video
Lada in F1 yes
The brothers are crazy fun ..respect from Bulgaria
2020 cars will fly. Russians-we make joke We meant walk 😂
I found this mesmerizing to watch
You might call it an
“IMPERIAL WALadaKER”. 🤔
The BlyAT-AT
Those legs need a third offset to counter some of that roleback, plus the the legs need some ability to counter turn to prevent snapping. But that is cool, engineering is the ultimate universal languange and it aamazing to see crazy stuff built in other countries. Can"t wait to see more.
Anyone have a link to the builders channel?
Edit: Workroom Siberia
Thanks man, couldn't find it on my own :)
Hey fellas, cool lada. Keep it up. Both legs step at the same time, try asynchronical. As in left-right left-right. That might help with that little backdrag. And deffo raise the front end. But eventually make it a centipede.
This is AWESOME!
You should try making this a three wheel car using a motorcycle on the back as your powertrain, and the two front wheels to steer the car. You guys are Awesome keep up the good work!
Russian engineers: Making crazily cool stuff with basically no money since time immemorial.
I vote for legs on the front too!