Loved all your teardowns as you shown and mentions the clip, ram, rom, cpu, cooler & etc. It adds more value for your teardown method & videos (considering to others)... And no bada bidi bong loud & un-necessary bgm...
@@McLova911 One. Leave game mode alone if that's the case, leave it Fan Mode off until you're aware from debris source. 2. You only see bits of debris in the transparent fan window, nowhere else inside of the transparent glass back. (I own the 7SPro and work in a pretty dust ridden workplace. I often keep my phone in my department locker because debris just loves static build up, even from pocket lint).
@@McLova911 Also, this is why the Intake near the camera array has a mesh screen, and if I recall even has a white sheet moisture pad(?) Inside I could be wrong about the pad because I see white something underneath the mesh of my phones intake.
I ordered one of these for christmas so I'm glad your video exists! I do have one question though- With there being so much copper sheeting inside prone to bends and folds, would we expect worse cooling performance after the first disassembly?
You mean on the unit I took apart? Yeah if you take it apart, its always best to re apply the thermal paste. I don't show it in the videos to save time, but I re apply the thermal pastes when I am done with the videos.
Hello i want to replace the fan on my 7 pro because its scattered. But i have the version with the RGB fan is there a option to only replace the fan blade or is it on unit now.
Where can I get a motherboard for this phone? I bricked mine and messed it up desoldering a bad IC. There were shorts all over the board. I really don't want to buy a whole phone for a simple board replacement. I think the damage I've done to my board is beyond repair. Any ideas?
@@McLova911 if you have a portable air compressor, may it be compressed air spray can or a device itself, just blow on both intake and exhaust vents of the phone. Make sure you device is turned off while doing so
@@McLova911 i've seen others used vaccuum cleaners with tiny nozzles to suck out dust or blow it. blowing or sucking dust from the inside would be enough.
There are zero parts available for this phone on the site you link in the vido description. Where can I source new batteries for it? I have been googling around, but simply cannot find a place that would have any sort of spare parts for this brand.
Hello good sir, do you have a video on how to replace/repair a Red Magic 5G shoulder trigger? I accidentally cut my left trigger wire 😭😭 while cleaning my fan and residues
Yep, but removing the paint on the glass wouldn't make much difference since the adhesive strip around it would basically become the black paint border's replacement.
@@PBKreviews You can try out the patented "JerryRigEverything" method (double sided tape) You could also buy adhesive strips specifically for phones and cut them into shape, or the easier but basically permanent method of using UV resin
I'm wondering the same iv tried a long bristled brush but I just can't get it to actually brush the glass lol iv tried compressed air but it's still there
It's not too difficult, just use a hair dryer to apply heat as needed to loosen the adhesive and work your way around prying it off. You will probably need a suction cup tool to help you gain leverage to get a pry tool in between the glass and frame, or you can use a thin metal tool or razor blade but that would probably scratch up or scuff up your frame.
I got one in the new year. Already getting hot wile gaming. Gave me heat warning one time. Search says maybe battery. Why do they make these devices so hard to open up. What's wrong with screws? Maybe places i bring it, living in the north the clement changes alot over they year. I kinda want to keep a device for more then a year or 2. Always have issue.
It helps a lot, blows out the heat from the heat chamber inside the phone helping it cool down faster, and stay cooler. The quicker you get heat out the better the phone would operate.
Thank you i'm interesting this phone. But yeah disassembly is a must for me since after 1-2 year after heavy use need to replace battery / thermal paste like poco i replace button and thermal and battery. This video give me idea how hard to do it :D . Thank you. Nubia M2 remove battery is nightmare for me too so hard XD
Can you do a video to show how to clean the redmagic 6s pro air vents and if its ok to blow caned air through it or would a vacuum work to clean the vents because i have one but the country I'm in we don't have good phone techs or one's who know about the phone and shipping it out to get fix will be extremely expensive for me. Just want to know for future purposes in case my vents gets dusty or clogged
Hello, please help me understand what's wrong with the nubia red magic 7 pro phone, the phone stopped charging, and they can't understand the reasons, replacing the controller did not work!?
@@PBKreviews then thank you for the teardowm video for redmagic 7 pro The reason is because I grew up wanting to be a cell phone repairer and trying to learn something new. like for example the oppo reno 7 pro 's video After watching your teardown video, I will understand the question in the video to learn.
Please Disassemble The New Poco F4GT. I Couldn't Find Anywhere. I Hope You Are The First On YT To Teardiwn That Phone😟😟. Subscribed For The Very Reason For This.💝💖
the fan air portion is closed off with a lining/adhesive so the area it has moving air is just a chamber. The air doesn't get into other portions of the phone so unless you drop your phone and crack the back or the adhesive on the back comes off, there shouldn't be any dust showing up inside the back glass.
@@PBKreviews hello again, you will right about the dust part that it wont get in the back, but theres a bigger problem, so i got my Redmagic 7S Pro and theres alot dust in the intake fan or whatever i don't know what it is called, so i wanted to as is it possible to disassemble the back, get the dust out and but the back frame back on without any damages
i hate those coaxial cables lol. they use them on xbox controllers and you have to remove them to take the controller apart and they aren't designed to be unplugged and replugged a bunch of times so if you like to change your controller case and buttons / replace your sticks often then chances are these antenna connectors will break off the board eventually ripping a pad or two off with them. Nightmare to fix!
Help! I recently got this phone and the darn intro song to theo Vons podcast blew my speaker. It got so loud so fast it was immediate. I just contacted the company but I never finished setting it up because I only used it to watch a video before bed and hadn't gotten a sim for it and didn't finish warranty. They made it so hard to get a year warranty although I bought it FROM them. What do I do. This looks likes if I get the speakers replaced I'll damage other parts of the phone and i barley have gotten to use it. 😭
If you paid with your credit card, I would suggest contacting them and filing a complaint, since your credit card company usually will have more leeway with them and you will have a better chance at arguing for a replacement or refund with them. They should honor it regardless of you registering the warranty.
After you disassemble the phone as shown in the video, all that is left is to pry off the screen. There is no point for me to damage a working screen to pry it off when there is nothing to it. Just apply some heat and pry off.
Здравствуйте я из России надеюсь всем понятна ситуация в России из-за войны толком ничего не заказать! Незнаете когда будет глобальная версиятпо всему миру?
I have this phone it has two issues. The side menu shortcut tab is not removable, defeats the whole point of the fancy screen. Second after the latest software update the fan no longer works. Over priced for issues like that.
@@djkivler1916 latest build I reached out to Nubia and the advised me to enter *#8604# in your dial pad, then you will enter Test mode.After that, please choose the option named "Fan test". adjust to the highest speed, and the speed above 12000 rpm is normal. Noise-related issues are also tested at this gear. It started working, think phone needs ahard reboot after some updates.
Hi bro I has used red magic 7 with battery 4500 mh capacity..can I used the of red magic 7 pro with battery 5000 mh capacity on my red magic 7..is battery are same..
Hi, usually there isn't enough room in the frame compartment for a larger battery to fit. The 5000 mAh battery would be slightly larger. Also since the 7 pro and 7 (from what I remember) have different charging speed capabilities, it might not work for fast charging at the same speed for the battery since the battery may not be rated for it. It might work also but won't know until you try.
@@PBKreviews thanks you do you think i can chance my screen my self im really afraid :( i dont want to pay any personn i want to repair it my self and my new screen amoled is coming in 5 day
lol not sure maybe they can engineer it differently one day but one thing I can think of is it would get damaged easily from a drop if the motherboard or main components were located too close to the outer parts of the phone.
@@alexwagner9674 No, after some time the air Inlett or what it is collect dust and the fan gets louder (Personal experience) but i still love my redmagic
I usually don't pry off working screens unless there is something underneath that needs to be shown because there is a high chance of damaging or breaking the screen and it costs me a lot of money to purchase these phones so I don't want to render them useless. After the disassembly shown in the video, all that is left is to heat it up and pry off the screen from the frame so nothing much to it.
Red magic 7 pro I bought from Nubia Global Store and is worst phone i ever bought. Cooler works very loudly and not only that, it no longer charges after two weeks of use. I did not advise anyone to buy it
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Loved all your teardowns as you shown and mentions the clip, ram, rom, cpu, cooler & etc.
It adds more value for your teardown method & videos (considering to others)...
And no bada bidi bong loud & un-necessary bgm...
Thank you :)
Your disassemble videos are the best. Really appreciate them every time🙌
Glad you like them, and thanks! :)
@@PBKreviews What should i do against stuff going inside the phone? Hair and stuff like that its transparent and has a fan which sucks things in it.
@@McLova911 One. Leave game mode alone if that's the case, leave it Fan Mode off until you're aware from debris source. 2. You only see bits of debris in the transparent fan window, nowhere else inside of the transparent glass back. (I own the 7SPro and work in a pretty dust ridden workplace. I often keep my phone in my department locker because debris just loves static build up, even from pocket lint).
@@McLova911 Also, this is why the Intake near the camera array has a mesh screen, and if I recall even has a white sheet moisture pad(?) Inside I could be wrong about the pad because I see white something underneath the mesh of my phones intake.
@@yeejay6396 Thanks man, but i already have an Redmagic 7s Pro for around 5-6 months now, appreciate it tho 👏👍🙏
Sir really want to congratulate you on your Galaxy S22 series videos very nicely done huge respect.
Thank you 😀
Nice teardown, very thorough 👍
Thank you! :)
The cooling system is very impressive. Good job Nubia.
👍
@Phonelover999 Like.. is this a statement or are you going to be working for them in the future?
@@PBKreviews CAN i change the thermal.. ? 😊
Great work ❤️❤️❤️ Love From Bangladesh 🇧🇩🇧🇩❤️❤️❤️🇧🇩🇧🇩
Hello and thanks! :)
Is there an easier way to clean the vents? I'm always afraid to disassemble anything that's not just held on with screws
just use an air can and u can blow the dust out just dont do it at point blank range with the phone and it will be fine thats how many ppl do it
@@DarknessJuggyJugernaut that won't blow the dust through the vent and right into the CPU or clog the fan on the other end?
@@DarknessJuggyJugernautWhich side is the intake and which is the out?
Just perfect and thank you for this!
Thank you and you're welcome!
stepup improve manufacturing thumbs up for nubia and for pbkreviews for showing us
👍😀
I ordered one of these for christmas so I'm glad your video exists! I do have one question though- With there being so much copper sheeting inside prone to bends and folds, would we expect worse cooling performance after the first disassembly?
lol, hello there
@@4Simmix4 uh...
Well if that's the case then don't disassemble.
The phone is kinda unique with internal cooling fan,nice video
Thanks! :)
Could you give me an explanation about the "dual cell battery" I looked everywhere and couldn't find anything about it?
Isn't it necessary to clean and change the thermal paste?
You mean on the unit I took apart? Yeah if you take it apart, its always best to re apply the thermal paste. I don't show it in the videos to save time, but I re apply the thermal pastes when I am done with the videos.
and what thermal paste do you use? Is the color of this device pink or any of them will work?
Why not make a easy removable fan to remove residual dust?
es muy diferente el desmontaje de el pro al de la versión normal?
Hello i want to replace the fan on my 7 pro because its scattered. But i have the version with the RGB fan is there a option to only replace the fan blade or is it on unit now.
Where can I get a motherboard for this phone? I bricked mine and messed it up desoldering a bad IC. There were shorts all over the board. I really don't want to buy a whole phone for a simple board replacement. I think the damage I've done to my board is beyond repair. Any ideas?
I think my fan is giving me issues and is it possible to clean the fan (module itself if not soldered) without taking out the battery teardown?
how do you clean the fan when dust gets in in it
I guess you can use mini air compressors or blowers, and small gadget brush with fine tips
@@chini2W0 how? Can u explain please i need help since im getting the phone
@@McLova911 if you have a portable air compressor, may it be compressed air spray can or a device itself, just blow on both intake and exhaust vents of the phone. Make sure you device is turned off while doing so
@@McLova911 i've seen others used vaccuum cleaners with tiny nozzles to suck out dust or blow it. blowing or sucking dust from the inside would be enough.
There are zero parts available for this phone on the site you link in the vido description. Where can I source new batteries for it? I have been googling around, but simply cannot find a place that would have any sort of spare parts for this brand.
AliExpress (8 months later, yes)
@@lalkaveka4417 Haha no worries for the late reply, and thanks. I have figured it out in the meantime, but ended up buying a different phone.
Could you change the CPU to a newer model ?
No, the CPU aka SoC is soldered to the board, plus there is nothing newer "yet".
Hello good sir, do you have a video on how to replace/repair a Red Magic 5G shoulder trigger? I accidentally cut my left trigger wire 😭😭 while cleaning my fan and residues
Hi, no sorry I don't. It should just peel off after you disassemble the phone if I'm not mistaken.
is it just me or did i see absence of thermal paste . like the applies the thermal paste in a squiggle and it left air pockets?
you should remove the battery sticker, remove the black paint on the glass, and put it back together, it would look amazing
Yep, but removing the paint on the glass wouldn't make much difference since the adhesive strip around it would basically become the black paint border's replacement.
@@PBKreviews You can try out the patented "JerryRigEverything" method (double sided tape)
You could also buy adhesive strips specifically for phones and cut them into shape, or the easier but basically permanent method of using UV resin
Is there any alternative way to clean the fan from dust?
you can try to use a compressed air can to gently air out the vents but thats about it.
I'm wondering the same iv tried a long bristled brush but I just can't get it to actually brush the glass lol iv tried compressed air but it's still there
@@matthewscarborough2597 Did you get it out?
When will the pro be released globally? And is this phone possible to buy in the states?
Probably sometime in quarter 2 of the year. Its a tempting device, I like it a lot. Especially the transparent version.
Do you know if this 7 Pro have Global(Unlocked) version?
Where I can buy it? I can only find Chinese Version.
The 7 pro global hasn't been released yet
In April 12
Is it easy to change the back cover? The glass got broke and I'm going to prder the cover.
Mine is 7s pro
It's not too difficult, just use a hair dryer to apply heat as needed to loosen the adhesive and work your way around prying it off. You will probably need a suction cup tool to help you gain leverage to get a pry tool in between the glass and frame, or you can use a thin metal tool or razor blade but that would probably scratch up or scuff up your frame.
Nice as always
I got one in the new year.
Already getting hot wile gaming. Gave me heat warning one time. Search says maybe battery.
Why do they make these devices so hard to open up. What's wrong with screws?
Maybe places i bring it, living in the north the clement changes alot over they year.
I kinda want to keep a device for more then a year or 2. Always have issue.
What type of adhesive did you use?
You can watch this video on adhesive to better explain: ruclips.net/video/T4iiPUIM7-Y/видео.html
Can u explain the effectiveness of how does that active cooling fan work in my opinion its kind of useless
It helps a lot, blows out the heat from the heat chamber inside the phone helping it cool down faster, and stay cooler. The quicker you get heat out the better the phone would operate.
@@PBKreviews yea buddy thanks
Not useless at all
Thank you i'm interesting this phone. But yeah disassembly is a must for me since after 1-2 year after heavy use need to replace battery / thermal paste
like poco i replace button and thermal and battery. This video give me idea how hard to do it :D . Thank you. Nubia M2 remove battery is nightmare for me too so hard XD
What alcohol did you use to remove battery?
www.ifixit.com/products/ifixit-adhesive-remover?variant=39915173740647
Can you do a video to show how to clean the redmagic 6s pro air vents and if its ok to blow caned air through it or would a vacuum work to clean the vents because i have one but the country I'm in we don't have good phone techs or one's who know about the phone and shipping it out to get fix will be extremely expensive for me.
Just want to know for future purposes in case my vents gets dusty or clogged
Same, got the RM7S pro and i cant get the dust out
@@McLova911 i can always tell mines have dust from how louder the fan sounds already
@@lithiumdarko2113 Ye
Hello, please help me understand what's wrong with the nubia red magic 7 pro phone, the phone stopped charging, and they can't understand the reasons, replacing the controller did not work!?
Can you remove the glass screen (not screen itself) without complete disassembly?
nope, the screen and glass are glued together and the glass is not user replaceable.
@@PBKreviews ah right okay dam! 😅
And also you can check phone under
display front face camera which can be fun.
Oh yeah I should have shown how the cut out was for it but forgot to mention it.
best choose between 2022 launched
treadown phone for
Sir,Can you film about the redmagic7 series on your channel in the next issue?
Hi, what do you mean?
I would like to see a teardown video about redmagic 7, is that possible?
@@yetongtan726 depending on how much interest there is in this video, i will consider doing the 7 as well.
@@PBKreviews then thank you for the teardowm video for redmagic 7 pro
The reason is because I grew up wanting to be a cell phone repairer and trying to learn something new.
like for example the oppo reno 7 pro 's video
After watching your teardown video, I will understand the question in the video to learn.
Red magic 7 please. 🙏
Please Disassemble The New Poco F4GT. I Couldn't Find Anywhere. I Hope You Are The First On YT To Teardiwn That Phone😟😟. Subscribed For The Very Reason For This.💝💖
same with the non pro version? clean teardown sir 👍
may be slightly different. If i get a chance to do the non pro, ill do that as well down the line. thanks!
How did you tighten the back like before?
You apply new adhesive to the back. Here is a video I did a while back on adhesive: ruclips.net/video/T4iiPUIM7-Y/видео.html
@@PBKreviews much appreciate it dude thanks
Greetings will there be Redmagic 9 pro (not plus) disassembly video ? :)
Currently I don't have plans for it
@@PBKreviews ok, undrestood
Any idea how to clean the fan?
Without opening it up, maybe a compressed air can carefully spraying the air from one end
@@PBKreviews that's the answer I'm afraid of.... Plenty of stories around of people shattering the fan blades doing that.
@@D3Fd0ck Did you get the dust off?
I want to know where I can send the fan of my 16g ram redmagic 7 to be repaired
Hi can you review for mi 11 pro? Thank you
i have the same phone is little break in display. Its crazy how tiny all is
Sorry i want ask, from redmagic 7 pro LCD, compatibility to 7s pro?
same question, do you solve it, i need one for 7 s pro i dont know where
What should i do against stuff going inside the phone? Hair and stuff like that its transparent and has a fan which sucks things in it.
the fan air portion is closed off with a lining/adhesive so the area it has moving air is just a chamber. The air doesn't get into other portions of the phone so unless you drop your phone and crack the back or the adhesive on the back comes off, there shouldn't be any dust showing up inside the back glass.
@@PBKreviews okay thanks
@@PBKreviews hello again, you will right about the dust part that it wont get in the back, but theres a bigger problem, so i got my Redmagic 7S Pro and theres alot dust in the intake fan or whatever i don't know what it is called, so i wanted to as is it possible to disassemble the back, get the dust out and but the back frame back on without any damages
Will you teardown iPhone se 3?
Yes soon :)
@@PBKreviews when bro? Have you got your hands on it
Hi bro please do iqoo 9 se teardown
Anyone here know the power it requires to operate charge separation feature on rm7/7pro? Coz I'll use it on a powerbank with the same rating.
i hate those coaxial cables lol. they use them on xbox controllers and you have to remove them to take the controller apart and they aren't designed to be unplugged and replugged a bunch of times so if you like to change your controller case and buttons / replace your sticks often then chances are these antenna connectors will break off the board eventually ripping a pad or two off with them. Nightmare to fix!
yeah lol I don't like them either.
Help! I recently got this phone and the darn intro song to theo Vons podcast blew my speaker. It got so loud so fast it was immediate. I just contacted the company but I never finished setting it up because I only used it to watch a video before bed and hadn't gotten a sim for it and didn't finish warranty. They made it so hard to get a year warranty although I bought it FROM them. What do I do. This looks likes if I get the speakers replaced I'll damage other parts of the phone and i barley have gotten to use it. 😭
If you paid with your credit card, I would suggest contacting them and filing a complaint, since your credit card company usually will have more leeway with them and you will have a better chance at arguing for a replacement or refund with them. They should honor it regardless of you registering the warranty.
You can do this with Red magic 7s Pro??
I don't think I will be doing that one.
Good job
What about the most important part..the LCD
After you disassemble the phone as shown in the video, all that is left is to pry off the screen. There is no point for me to damage a working screen to pry it off when there is nothing to it. Just apply some heat and pry off.
Great that's what I wanted to know 👍 Informative video thank you
Здравствуйте я из России надеюсь всем понятна ситуация в России из-за войны толком ничего не заказать! Незнаете когда будет глобальная версиятпо всему миру?
The redmagic 7 pro is still not out
@@cleanmvsgaming1014 ok thanks
@@Butcherķř the red magic 7 pro is available. The red magic 7s pro is not available yet
I have this phone it has two issues. The side menu shortcut tab is not removable, defeats the whole point of the fancy screen. Second after the latest software update the fan no longer works. Over priced for issues like that.
what software version have u installed which made the fan not work?
@@djkivler1916 latest build I reached out to Nubia and the advised me to enter *#8604# in your dial pad, then you will enter Test mode.After that, please choose the option named "Fan test". adjust to the highest speed, and the speed above 12000 rpm is normal. Noise-related issues are also tested at this gear. It started working, think phone needs ahard reboot after some updates.
@@davidmacd7525 u mean V312? Thanks for the info. I hope i wont be needing it in the future lol 🤞
@@davidmacd7525 i havent updated yet to V312 cause they said their battery increased consumption after updating to V312.
@@djkivler1916 maybe a slight amount but nothing really noticable, been playing the new apex legends and it still runs for a good while on max setting
Hi bro I has used red magic 7 with battery 4500 mh capacity..can I used the of red magic 7 pro with battery 5000 mh capacity on my red magic 7..is battery are same..
Hi, usually there isn't enough room in the frame compartment for a larger battery to fit. The 5000 mAh battery would be slightly larger. Also since the 7 pro and 7 (from what I remember) have different charging speed capabilities, it might not work for fast charging at the same speed for the battery since the battery may not be rated for it. It might work also but won't know until you try.
Can you up load video compare the battery of red magic 7 and red magic 7 pro.i want try but 😢 but not convinced bro hope you can help me
CAN i change the thermal.. ?
yeah
@@PBKreviews thanks you do you think i can chance my screen my self im really afraid :( i dont want to pay any personn i want to repair it my self and my new screen amoled is coming in 5 day
@@PBKreviews Can you please help me ? where can i contact you ? discord ? snap ? please help me i have no repair center and i want to do it my self
Red Magic 7, the non pro version please 🙏
Will look into it
@@PBKreviews What should i do against stuff going inside the phone? Hair and stuff like that its transparent and has a fan which sucks things in it.
why they put hot cpu on inside not outside???🙈🙈🙈
lol not sure maybe they can engineer it differently one day but one thing I can think of is it would get damaged easily from a drop if the motherboard or main components were located too close to the outer parts of the phone.
Gracias
I like that things
Nfc không hoạt động trên redmagic 7 pro=((
دست خوش ستون
yo queria ver como cambiaba la pantalla :c
not available in red magic usa til now
It is cool
Thanks! ✌️👍
This is way better than destroying a phone 😆. I don't understand who in the hell would play your phone to the point you'll have to scratch or bend it.
lol :) 👍
I liked inside
imagine if iphone 15pm has this cooling set up
And cost 1,5x higher because "revolution"
good mr
Thanks! :)
@@PBKreviews miss you
This is Nubia redmagic 7s pro!
I'm kinda worried about the air inlet.. too much dust comin in
The channel the air goes through is sealed off from the rest of the phone. The air goes through the channel and out the other side.
@@PBKreviews Does that mean I don't have to worry about dust build up inside the phone?
@@alexwagner9674 No, after some time the air Inlett or what it is collect dust and the fan gets louder (Personal experience) but i still love my redmagic
WHY NOT REMOVE THE SCREEN??
I usually don't pry off working screens unless there is something underneath that needs to be shown because there is a high chance of damaging or breaking the screen and it costs me a lot of money to purchase these phones so I don't want to render them useless. After the disassembly shown in the video, all that is left is to heat it up and pry off the screen from the frame so nothing much to it.
يرجي اضافة الترجمه العربيه
Yeeeaaahh....no one is putting this thing back together right. Ill just buy a new one.
habla en español porfavor
is it me or does he sound very unmotivated?
I'm just very mono tone, lol I don't want to act all excited since it would sound fake but yep.
Sir can i buy that phone with a huge discount haha
I don't have it anymore :)
Red magic 7 pro I bought from Nubia Global Store and is worst phone i ever bought.
Cooler works very loudly and
not only that, it no longer charges after two weeks of use.
I did not advise anyone to buy it
What? How
Also its s f ing internal fan, its obviously loud because of dudtz, but it doesnt bother me
How redmagic 7
Bohot Axha h lekin tum khud Q nhi ate apni video me khud B aya kro itna sharmate Q ho?
Its a disassembly video, no real need for me to be in the video directly :). I was in the last few drop test videos.
@@PBKreviews tumhara kaam mujhe bohot pasand h tum zarur tarakki kroge
noice
👍
can i have that phone? 😆
Sold it after the video :) I don't usually hold on to the devices.
do you have contact email? I'm from Brazil and here has no concert assistance for redmagic, I have the 7
Not sure what you mean about concert assistance.