I had to make an impromptu cake topper but don't have an acrylic sheet with me. So I put together 2pcs of laminating sheets, laminated them and followed the same process you did. It turned out beautifully. Thank you
I don’t have a maker but gives me an idea that if I had some acrylic I could cut out with scissors and add Cricut design. Thanks. You are such a good teacher.
Yes, about the transfer tape... I would imagine that they are not all the same.. so I'm assuming then, that of what you've tried that they all do the job for the most part but if you want to deal with something where details matter than go with the brand name? To which i would also assume that aside from leaving behind less residue on the clear parts it would probably also handle finer details the best as well? On any materials? I'm going to pour thru your videos looking for looking for answers as they seem to be the most complete. As well as what i pick up in the comment section! Just time consuming.. but I have yet to find a quick guide to this machine.
This is awesome, thank you so much. I know you say to watch carefully when cutting…but what happens if you go too many passes? Or how do you know if it’s too many? I’m making a fairly small project so I can’t really “see” anything. Brilliant tutorial thank you.
Place a popsicle stick behind the stem of the acrylic. You won't need to glue it, of course you wouldn't. Try some icing as glue. The acrylic stem now has support.
All supplies linked in the description below the video. Click on show more on computer. On mobile, click the arrow to expand the description or swipe up on the video.
Great ideas and simple to do! Thank you for sharing this project step by step. Are there acrylic sheets a little thicker that could be used for mor stability?
I'm late to the show. You actually don't need a stencil font for YAY. You created a new hole at the bottom of A by adding base and it worked fine. It would be the same with the "eye" in A. Otherwise, interesting and informative project. I make a lot of non-transparent cake toppers using 2 mm PVC foam board as the base, which is very stable. Then I apply glitter or mirror cardstock on top and possibly other materials. Adhesive vinyl can be applied before cutting. I as well used heavy chipboard setting in the beginning but later realized that 1.5 mm chipoard with 12 passes was just enogh.
Angie, I see the thin plastic comes in 25 count packs only. Could you point me in the direction of other uses for this product? Don't want to have this product sitting around! Love the cake toppers! Will be making some smaller versions for cupcakes!
Thanks for your tutorial. Did I have to set the circuit machine to a particular point before started cutting. E.g paper, vinyl, iron-on, light cardstock, cardstock,, bonded fabric, poster boards, or custom
Gracias por tu video, sòlo para aclarar, este material es conocido en español como acetato, no es acrilico, es un plastico duro como el que viene en las cajas de los juguetes como ventana para que veas el contenido, tengan cuidado, la maker NO CORTA ACRILICO DE VERDAD, Puedes dañar tu màquina si lo intentas, este material que muestran en el video es ACETATO.
Angie, when you say click on button below For a list of items needed for this project, The first button my Mac shows public comments. Where else can I look.
It would invalidate the warranty if used as it also been stated the explorer has been known to engrave also but again would make warranty not valid if and breakdowns
Love this! I bought all the suggested tools needed but ran into a problem when i got to cutting the acrylic. What material did you set in the Cricut design space app? I’m not seeing an acrylic sheets option or any similar option where the parameters of the cut are set to 16x pass or set to a knife blade. Please help. Your assistance is greatly needed!
I'm new to Cricut and when I tried this project where the topper needed multiple passes, it looks like the blade shifted 1/4" every time it passed through so it's a mess. I've tried calibrating and it's not helping. Does anyone have suggestions for how to fix this? This is only the 3rd time I've used my machine.
Hi. How do I get the vinyl to line up with the word celebrate pls? I made one tonight with a different word and couldnt get it to line up! Is it the font type i might be using? Can I paint the acrylic instead? Thank you!
@@AngieHolden I tried painting with acrylic paint but didnt work. I printed out the word in the 0.020 plastic and then in vinyl but was hard to match up. Will try again with an offset. Thank you
Hi Angie! I’m following your directions from the video. I have the maker and using design space on a Mac Book Pro but I am not seeing the offset button/option to make the back of the cake topper. Does it only work for text? I have an image and text in my cake topper.
Dear Angie thanks for sharing the Acyleric cake toppers Can we cut acyleric on Cricut explore air 2 with deep cut blade and chipboard settings Please whenever you share tell us how to do it on explore air 2 also Thanks Basharat
Links are always in the description below the video. On computer, scroll down and click show more. On mobile, swipe up on the video or click the arrow to expand the description.
This confuses me a bit. So you manually fed the mat in 16 times, or the Cricut kept cutting for 16 rounds? Also wondering if cutting two matching acrylics together would make it sturdier. Would need a clear glue…🤔
@@annaphelps7775heavy chipboard is 24 passes by default without unloading the mat. She just stopped cutting at 16 passes. But you probably know by now.
Not sure? I have used this a BUNCH with no issues. I sometimes have to do more passes at the end. I think humidity effects it as sometimes I need more and other times it is done way before the last pass.
I have links to all supplies in the description below the video. On computer, click show more. On mobile, swipe up on the video or click the arrow to expand the description depending on how you are watching.
I cant get the knife blade to work in my Cricut Cut Smart 2....can you think of any reason why...It wont even register as an option and wont touch the acrylic
Really looking at getting into making these myself, I don't own a cricut just yet but just stumbled on your channel and it's brilliant. Is there a way to make them more 3d like? I've seen some pictures where they look proper 3d. Is there a way to contact you to explain more? Thanks for the videos anyway, persuaded me to get one 😀
I think I responded to your email but for anyone else. Be sure to keep your design simple without any small pieces. Also you want to make sure you let the machine cut all the way through as if there is even the smallest bit that isn't cut, the piece will break in that area.
the "celebrate"...I didnt see you make they vinly and put the vinyl on that. I was hoping to see the entire process. I am a new cricut owner and everything is confusing to me. I am trying to stick with one or two youtubers. Thanks for the wonderful helpful tips
@@AngieHolden what is it though? I didnt see it. It was just presented in the video with the vinyl on it already. I mean like how did you get the vinyl the same size as the word celebrate? Did you cut the vinyl and the plexiglass at the same time on the cricut? It is easy for those who have done it
Hi, I have a design, and I have tried to cut several times, but in every once there are two problems show with me: 1- first one: during cutting, there is a cutting mistake shows in some part of design, that is happening when the blade stops in some place and it hangs machine from continuing. 2- Second one: after cutting, there are some parts of design not cutted very well although, I have tried to solve problem in several ways: 1- I putted tape on parts self, not only on edges of design( I used several types of tapes: blue, masking paper, ...itc). 2- I update blade setting to make more no of processes ( I increased until 4x), also I select 'more' option for pressure at cutting process 3- I experimented to make big & small sizes of design 4- I cleaned my mat to be free of all debris of waste materials. but no any of that solve the problem?!! Note: I'm using Green (standard one) mat, is it Ok, or should I use strong grip mat? and material is Acetate.
Correct but that setting is for a very thin acetate sheet. If you are using something thick, that setting and blade will not work. If it is really thick, the Cricut will not cut it at all.
The acrylic sheets that I used are linked in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.
The clear is acrylic. All products used are linked in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.
I don't know why but mine can't cut this and use the same grafix plastic 020 just work for me the first time and I was excited!😢 now I'm frustrated to see how others can do it and I can't!🤷🏻♀️ even with the heavy chipboard setting!
Is it a directive of Cricut the company to intentionally conflate acrylic with PET plastic? These 2 materials are vastly different in physical properties and are not interchangeable is most technical applications. Acrylic is very hard and useful in making dies. PET is not.
![Run Away - Tzuyu(TWICE) ツウィ 쯔위 [Music Bank] | KBS WORLD TV 240906](http://i.ytimg.com/vi/KnHNNyAYiu0/mqdefault.jpg)
💕 how did I miss this video until I saw the "short" you posted... 🤦♀️
I try to share my older videos as shorts so people can find it!
I had to make an impromptu cake topper but don't have an acrylic sheet with me. So I put together 2pcs of laminating sheets, laminated them and followed the same process you did. It turned out beautifully. Thank you
OH awesome!
BRILLIANT!!! I will copy you. Thank you so much
I can’t tell you how much your video has helped me with knowing the proper use of the options in the software. Thank you, thank you ❤
Wow that's fun! Great idea. On longer/larger designs how about just using 2 inserts on the bottom!
Great idea! That may work!
Yes, definitely worth a try.😊
I love these toppers. This looks so easy to do and you can basically have any custom design. Great project Angie. Thanks
Thanks so much 😊
I don’t have a maker but gives me an idea that if I had some acrylic I could cut out with scissors and add Cricut design. Thanks. You are such a good teacher.
Thank you. I bought this acrylic previously to do exactly these style of cake toppers. Now I may have the motivation to get some made.
You can do it!
I was looking for the right kind of clear plastic to simulate the acrylic look. Thank you for this, came right on time!
Glad it was helpful!
Thanks Angie ❤️
Nice cake topper i would put a white stick on back of the acrylic stick thank u
Thanks so much for sharing. I love this. That's what I am looking for to do for my daughter's birthday
You are so welcome!
Oh my those look fun to make.
This is so helpful thank you! Very clear tutorial and useful tip about the Cricut transfer tape
Glad it was helpful!
Yes, about the transfer tape... I would imagine that they are not all the same.. so I'm assuming then, that of what you've tried that they all do the job for the most part but if you want to deal with something where details matter than go with the brand name? To which i would also assume that aside from leaving behind less residue on the clear parts it would probably also handle finer details the best as well? On any materials? I'm going to pour thru your videos looking for looking for answers as they seem to be the most complete. As well as what i pick up in the comment section! Just time consuming.. but I have yet to find a quick guide to this machine.
excellent video
i love it
Love, love, love this!!! I have so many ideas!! Thank you so much for the tutorial!!!!
🎉💜💗❣🎉💜💗❣🎉💜💗❣🎉
So glad!
Thank you 🙏 what a fantastic video .
Thank you for sharing!!
You bet!
This is awesome, thank you so much.
I know you say to watch carefully when cutting…but what happens if you go too many passes? Or how do you know if it’s too many? I’m making a fairly small project so I can’t really “see” anything.
Brilliant tutorial thank you.
If it goes too many, it will cut into or even through your mat and into your machine.
Place a popsicle stick behind the stem of the acrylic. You won't need to glue it, of course you wouldn't. Try some icing as glue. The acrylic stem now has support.
Great tip!
Or chocolate
Love your videos so much info thank you
Glad you like them!
Omg! Thank you this was so helpful!
You're so welcome!
Yassss
Thank you for this video🥰😍🤩
Of course!!
Hi there! New here. I love your video….very informative.
Have you tried cutting thicker plastic?
Only thin plastic will work in a Cricut.
I love your tutorials , so helpful and detailed!🙂
Glad you like them!
You could have 2 "legs" for the topper to stand on so when you push it in, it won't be so floppy.
Sure.
Hi Angie this tutorial is great as I’m just starting to do acrylic toppers but I wondered what thickness you use
All supplies linked in the description below the video. Click on show more on computer. On mobile, click the arrow to expand the description or swipe up on the video.
Those turned out great! I only have an Explore Air 2 though, but I will have to see if there are enough reasons to get a Maker and a Joy. 😊
Very true!
I think you can use the explorer - look in your list of things to print on in design space- click print then browse all
@@marlenenicholl6825 I will, thanks!
What about doubling up the material? Cutting two separate and attach to each other to strengthen it.
You can try? I never find a glue that is clear enough and doesn't look horrible!
Beautiful, can you try to make a cake topper blank with thermal laminate sheet?
Thanks for a great tutorial, I enjoy them so much and learn things everytime.
Glad you like them!
Great ideas and simple to do! Thank you for sharing this project step by step. Are there acrylic sheets a little thicker that could be used for mor stability?
This is the thickest that I have been able to cut.
@@AngieHolden thank you!😊
I'm late to the show. You actually don't need a stencil font for YAY. You created a new hole at the bottom of A by adding base and it worked fine. It would be the same with the "eye" in A. Otherwise, interesting and informative project.
I make a lot of non-transparent cake toppers using 2 mm PVC foam board as the base, which is very stable. Then I apply glitter or mirror cardstock on top and possibly other materials. Adhesive vinyl can be applied before cutting. I as well used heavy chipboard setting in the beginning but later realized that 1.5 mm chipoard with 12 passes was just enogh.
Do you think adding a sheet of vinyl before cutting would be a problem ? So basically just use this for its thickness, but the vinyl adds color to it.
That might work!
Angie, I see the thin plastic comes in 25 count packs only. Could you point me in the direction of other uses for this product? Don't want to have this product sitting around! Love the cake toppers! Will be making some smaller versions for cupcakes!
Yea it is in a bulk package! Sorry I don't have any other crafts with it that I know of!
@@AngieHolden there you have it! A challenge for you!😀
Is there any way my Explore Air 2 can make these (2 gg-daughters with birthdays in July)? Wonderful tutorial! Thank you...
I don't think so! Sorry!
Thanks for the tutorial. Very clear instructions!! Does this also work for the Cricut explorer2?
I have not had any luck doing this with the Explore.
I can’t seem to find the list of materials you used. I can’t wait to try this!
In the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.
Thanks for your tutorial. Did I have to set the circuit machine to a particular point before started cutting. E.g paper, vinyl, iron-on, light cardstock, cardstock,, bonded fabric, poster boards, or custom
I use a basswood setting and watch it carefully.
@@AngieHolden my circut is explore Air 2
Can you cut this with a circuit air 2 machine and if so is the knife bland different.
No you cannot.
Gracias por tu video, sòlo para aclarar, este material es conocido en español como acetato, no es acrilico, es un plastico duro como el que viene en las cajas de los juguetes como ventana para que veas el contenido, tengan cuidado, la maker NO CORTA ACRILICO DE VERDAD, Puedes dañar tu màquina si lo intentas, este material que muestran en el video es ACETATO.
I have a cricut explorer can I use it for same
No it will not work.
@@AngieHolden thank you for your response I got a maker 3 after reading below comments. Thank u.
Hi there I absolutely love your videos!!!! Can I cut acrylic on my explorer air 2?
No that will not work.
@@AngieHolden thank you so much for the answer. Keep up the amazing videos 🥰
Can I stick two or more layers of acrylic together? Which adhesive is suitable for acrylic?
You would need a REALLY clear adhesive. Gorilla Glue makes a good one.
Would these be thick enough to make drink stirrers? Thank you!
I don't think so.
How do I scroll up or down on the patterns selection? I have a MacBook but cannot scroll up or down in the patterns secrion
Hmmm...not sure on a Macbook as it works for me on PC.
Hi so my cricut will arrive tomorrow, so where can i find to make that design? Do i need to download?
I just used a font then the offset tool in Cricut Design Space.
Love this! What was the option you choose to cut the acrylic?
Heavy chipboard or basswood both work.
So is this a thin acrylic or a thick acetate?
Maybe like a thick acetate?
Could you make two back to back to make stronger ?
Yes. But you would need some sort of super clear glue. I hate it when the glue shows!
Angie, when you say click on button below
For a list of items needed for this project,
The first button my Mac shows public comments.
Where else can I look.
There should be something that says "show more". Try that.
Hi, Can you please tell me what width size it is in mil the acrylic sheets
Can you do this on the explore 2? Or just the maker?
Just the Maker.
In the Amazon reviews included for the sheets, some people cut them using the explore machines.
It would invalidate the warranty if used as it also been stated the explorer has been known to engrave also but again would make warranty not valid if and breakdowns
Love this! I bought all the suggested tools needed but ran into a problem when i got to cutting the acrylic. What material did you set in the Cricut design space app? I’m not seeing an acrylic sheets option or any similar option where the parameters of the cut are set to 16x pass or set to a knife blade. Please help. Your assistance is greatly needed!
I think I used heavy chipboard setting.
Check if ACETATE is listed.
I'm new to Cricut and when I tried this project where the topper needed multiple passes, it looks like the blade shifted 1/4" every time it passed through so it's a mess. I've tried calibrating and it's not helping. Does anyone have suggestions for how to fix this? This is only the 3rd time I've used my machine.
Most likely it is moving on your mat slightly. Or your white star wheels are not moved over and are on the material. This causes a drag.
Hi. How do I get the vinyl to line up with the word celebrate pls? I made one tonight with a different word and couldnt get it to line up! Is it the font type i might be using? Can I paint the acrylic instead? Thank you!
I did an offset to get the outline. Not sure if that is what you mean? And yes you could paint it!
@@AngieHolden I tried painting with acrylic paint but didnt work. I printed out the word in the 0.020 plastic and then in vinyl but was hard to match up. Will try again with an offset. Thank you
Hi Angie! I’m following your directions from the video. I have the maker and using design space on a Mac Book Pro but I am not seeing the offset button/option to make the back of the cake topper. Does it only work for text? I have an image and text in my cake topper.
Well it should be there on a Macbook. Maybe try updating Design Space. If that doesn't work, they may have a glitch.
But can I paint the acrylic before cutting
I haven't ever tried that before.
Dear Angie thanks for sharing the Acyleric cake toppers
Can we cut acyleric on Cricut explore air 2 with deep cut blade and chipboard settings
Please whenever you share tell us how to do it on explore air 2 also
Thanks
Basharat
I have not had any luck cutting on the Explore machines.
Angie, are there any Cricut machines that can cut thicker acrylic? I bought our wedding cake topper on Etsy and it’s very thick and sturdy. Thanks!
No there is not.
What’s the best cheap printer for sublimation starting out
Try this: ruclips.net/video/-f4oH2x-Nu0/видео.html
Hi. Just wondering which Cricut Machine you are using for this tutorial. Thanks Jamine
The Maker is used for this one!
Good afternoon! How many millimeters does cricut cut the acrylic, or does it just record the letters?
Try this: ruclips.net/video/VIq9oWM7oS0/видео.html
Where do I find the links for what u used please
Links are always in the description below the video. On computer, scroll down and click show more. On mobile, swipe up on the video or click the arrow to expand the description.
i can make this too keychain right and engrave
It is really too thin for a keychain.
I would love to try this, but I can not find the link to the acrylic on Amazon. What are my old eyes not seeing?
Try clicking show more on computer or swiping up on mobile.
I LOVE this idea. Quick question…. When you say 16 passes… does this mean you cut it 16 times?
Yes.
This confuses me a bit. So you manually fed the mat in 16 times, or the Cricut kept cutting for 16 rounds? Also wondering if cutting two matching acrylics together would make it sturdier. Would need a clear glue…🤔
@@annaphelps7775heavy chipboard is 24 passes by default without unloading the mat. She just stopped cutting at 16 passes. But you probably know by now.
Hey Angie, can I do this with explore air 2 or I need the maker?
You would need a Maker or Maker 3.
Hi, I tried everything and it still did not fully cut trough. I have a Maker 3 and used the exact acrylic you had linked. Am I missing something?
Not sure? I have used this a BUNCH with no issues. I sometimes have to do more passes at the end. I think humidity effects it as sometimes I need more and other times it is done way before the last pass.
Can you do this on the Cricut explore air 2
No you can't.
I love this idea but my cricut won’t let me choose heavy chipboard
Do you have it set to Maker? This also uses the knife blade which is on computer only so no mobile devices.
Thankyou for that, I was on my iPad but just been on my PC and it works 🥳😘
Ok so this can I use the knife blade on explorer 3? And if not can I make these with explorer 3
The knife blade does not work with the Explore 3. Not sure how you would make these with that machine.
@@AngieHolden hmmmm ok 👍 thank you for replying though
Can you share the link to the acrylic you’re using please?
I have links to all supplies in the description below the video. On computer, click show more. On mobile, swipe up on the video or click the arrow to expand the description depending on how you are watching.
Hi .. it’s beautiful.. which machine u r using for this?
This will only work with the Cricut Maker or Maker 3.
I cant get the knife blade to work in my Cricut Cut Smart 2....can you think of any reason why...It wont even register as an option and wont touch the acrylic
any suggestions?
You need to have a Cricut Maker or Maker 3 to work with the knife blade. You also need to have a computer as you can't use it with mobile or tablet.
Would this work with acetate? I have clear acetate and have no idea what to do with it
Yes! It will just be thinner than when is shown here.
Really looking at getting into making these myself, I don't own a cricut just yet but just stumbled on your channel and it's brilliant.
Is there a way to make them more 3d like? I've seen some pictures where they look proper 3d. Is there a way to contact you to explain more?
Thanks for the videos anyway, persuaded me to get one 😀
Message me on IG or Facebook with pictures of what you are talking about. Maybe I can help!
@@AngieHolden thank you so much! I've sent you a message.
The setting is heavy chipboard? 16 times?
That should work. Just check once it is done before removing it.
Do you think that the cricut maker 3 will be able to cut thicker acrylic ??
No. It is the same.
Hi
How many mil can I use?
Everytime i try to make the topper it breaks. Am i doing something wrong? I have a maker 3
I think I responded to your email but for anyone else. Be sure to keep your design simple without any small pieces. Also you want to make sure you let the machine cut all the way through as if there is even the smallest bit that isn't cut, the piece will break in that area.
Is that the thickest that can be cut
It is the thickest I have been able to cut.
Hello, can this be done on the Cricut Explore Air2?
No it cannot.
Can you use other cricut machines to do acrylic toppers?
Not that I know of.
I’m not quite sure why you needed a stencil font? A normal ‘A’ would have been fine. Having the center fall out would be perfect.
If you like that then that works!
the "celebrate"...I didnt see you make they vinly and put the vinyl on that. I was hoping to see the entire process. I am a new cricut owner and everything is confusing to me. I am trying to stick with one or two youtubers. Thanks for the wonderful helpful tips
The process is the same for any design.
@@AngieHolden what is it though? I didnt see it. It was just presented in the video with the vinyl on it already. I mean like how did you get the vinyl the same size as the word celebrate? Did you cut the vinyl and the plexiglass at the same time on the cricut? It is easy for those who have done it
@@AngieHolden nevermind
Can you use Iron-on with acrylic?
I haven't ever done that so I am not sure.
Is this only capable with maker?
Yes.
hi, what is the maximum thickness cricut maker can cut as acrylic?
.020 is the max I have done.
Hi,
I have a design, and I have tried to cut several times, but in every once there are two problems show with me:
1- first one: during cutting, there is a cutting mistake shows in some part of design, that is happening when the blade stops in some place and it hangs machine from continuing.
2- Second one: after cutting, there are some parts of design not cutted very well
although, I have tried to solve problem in several ways:
1- I putted tape on parts self, not only on edges of design( I used several types of tapes: blue, masking paper, ...itc).
2- I update blade setting to make more no of processes ( I increased until 4x), also I select 'more' option for pressure at cutting process
3- I experimented to make big & small sizes of design
4- I cleaned my mat to be free of all debris of waste materials.
but no any of that solve the problem?!!
Note: I'm using Green (standard one) mat, is it Ok, or should I use strong grip mat? and material is Acetate.
Sounds like you are using an acetate that is too thick to be cut with the machine or just that setting/blade.
as mentioned in its setting, it uses deep point blade with it, but i haven't, what I should do?
Correct but that setting is for a very thin acetate sheet. If you are using something thick, that setting and blade will not work. If it is really thick, the Cricut will not cut it at all.
What size acrylic did you use for these?
The acrylic sheets that I used are linked in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.
Is it possible to make this with a cricut explore air 3?
No sorry!
@@AngieHolden thank you!
Which clear vinyl is this?
The clear is acrylic. All products used are linked in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.
Does this cut 2mm thick acrylic?
NO it will not.
Can you use acetate?
This is basically thicker acetate so maybe? Not sure if it would be too thin.
What machine brand is that?
It is a Cricut Maker.
What is the transparent thing called?
Acrylic.
Thank you
Where do you get your acrylic
Link in the description below this video for what I have found that cuts well.
I don't know why but mine can't cut this and use the same grafix plastic 020 just work for me the first time and I was excited!😢 now I'm frustrated to see how others can do it and I can't!🤷🏻♀️ even with the heavy chipboard setting!
Is it a directive of Cricut the company to intentionally conflate acrylic with PET plastic? These 2 materials are vastly different in physical properties and are not interchangeable is most technical applications. Acrylic is very hard and useful in making dies. PET is not.
This video is not associated with Cricut in any way. Thanks for the comment.
Love this! What if you don’t have a knife blade?
I have not had luck with any other blades.