DJI OcuSync Air Module wiring on an Omnibus F4 Quadcopter testing with DJI Racing Edition Goggles
HTML-код
- Опубликовано: 28 авг 2024
- These are the current Drone Coupons I know of including a tab just for DJI: geni.us/DR101Di...
You can get a set right now:
DJI: bit.ly/DJIRacin...
Amazon: geni.us/DJIGogg...
Banggood: bit.ly/DJIGoggl...
Gearbest: bit.ly/DJIGoggl...
Mid/Long Range Quadcopter - Higher End Build
Frame Minibigger Racer 255mm bit.ly/MiniBigg... $33.39
Motors T-Motor F80 2408 2200KV 2-6S Motor x4 bit.ly/TMotorF80 $95.96
ESC T-MOTOR F35A 3-6S BLHeli_32 Dshot1200 x4 bit.ly/TMotorF3... $71.96
FC Matek F405-CTR iNAV FC bit.ly/MatekF40... $39.90
GPS Neo-M8N GPS Module and Compass bit.ly/NEO-M8NGPS $25.99
Props KingKong LDARC 6040 Bi-Props bit.ly/LDARC6040 $5.14
Total $272.34
Mid/Long Range Quadcopter - Budget Build
Frame Minibigger Racer 255mm bit.ly/MiniBigg... $33.39
Motors Racerstar 2406 2-5S 2300KV Motors - 4 Pack bit.ly/Racersta... $39.99
ESC Racerstar Tattoo 35A ESC - 4 Pack bit.ly/Racersta... $47.89
FC Matek F405-CTR iNAV FC bit.ly/MatekF40... $39.90
GPS Neo-M8N GPS Module and Compass bit.ly/NEO-M8NGPS $25.99
Props KingKong LDARC 6040 Bi-Props bit.ly/LDARC6040 $5.14
Total $192.30
Here is the location of the DJI Assistant V2. Currently version 1.1.8: www.dji.com/dj...
Check out my current giveaway: geni.us/DroneRa...
These are the current Drone Coupons I know of: geni.us/DR101Di...
The DJI Ocusync Air module has the potential to be a game changing device. It includes an HD camera, provides uplink from the DJI Goggles RE to the quadcopter so you don’t need a radio receiver, provides video downlink from the quadcopter to the goggles so you don’t need a video transmitter. It’s compatible with your existing radio transmitter via the trainer port, at least if you have a FrSky Taranis. And it uplinks with your flight controller to provide an SBUS connection and reads telemetry data. It says this is an OSD connection but for the data we are getting now that is kind of overstating it. At least it provides live voltage from the quadcopter so that you can see that data.
This is the drone I was flying inside: • KingKong LDARC ET100 D...
Supporting Droneracer101 on Patreon means more reviews and giveaways for you: www.patreon.com/droneracer101
**************************************************
These are some of my favorite components right now:
**** Tiny Whoop ****
• Eachine E010S
Banggood: Eachine E010S: bit.ly/E010S
Gearbest: Furibee F36S:bit.ly/FuriBeeF36S (Try Code RC18OFF)
Extra 45C E010 Batteries: bit.ly/1S45C240mAh
**** Brushless Micro Drone ****
Lizard95: bit.ly/EachineL... • Eachine Lizard95 Revie...
Leader 120: bit.ly/Leader12... (Try Code RC18OFF)
• Leader 120
**** 5 Inch Racing Drone ****
• Diatone GT200 2017
Diatone GT2 2017 True X: bit.ly/DiatoneG...
Diatone GT2 2017 Stretch X: bit.ly/DiatoneG...
**** Radio Transmitter ****
Beginner Flysky Good Radio: bit.ly/FlyskyFSi6X
Best Beginner Option - FrSky GREAT Radio
Banggood: bit.ly/TaranisX7
Gearbest: bit.ly/TaranisQ...
Top of the Line FrSky: bit.ly/TaranisX...
**** Goggles ****
Entry Level Budget Goggles: bit.ly/VR007
Eachine Upgrade Goggles with DVR and Diversity: bit.ly/ev800d (These are the best option)
Aomway Commander Goggles with DVR, Diversity and Headtracker:
Banggood: bit.ly/AomwayCo...
Gearbest: bit.ly/AomwayCo... (Try Code RC18OFF)
Just want to support the channel at no cost to you? You can (and you can find some deals) with these links:
Banggood: bit.ly/DR101-Ba...
Gearbest: bit.ly/DR101-Ge...
Amazon: bit.ly/DR101-Am...
**************************************************
Subscribe and be a DroneRacer! : / @simracer101
Enjoy & remember to like and subscribe!
-- Find DroneRacer101 Online! --
Facebook: / droneracer101
Twitter: / droneracer101
Instagram: / droneracer101
-- Credits --
All titles and images created by DroneRacer101
“Droneracer101 is a participant in the Amazon Services LLC Associates Program and other affiliate programs, advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and other sites at no addition cost to you.”
Thank you for supporting DroneRacer101 by using these links. Testing all this hardware is quite expensive.
These are the current Drone Coupons I know of including a tab just for DJI: geni.us/DR101DiscountCodes
You can get a set right now:
DJI: bit.ly/DJIRacingGoggles
Amazon: geni.us/DJIGoggleRE
Banggood: bit.ly/DJIGogglesRE-BG
Gearbest: bit.ly/DJIGogglesRE-GB
I have one of these on my e-flite rv-7… absolutely amazing..!
Definitely use on a fixed wing to really test that advertised range. Although this isn't something I would ever get involved with, it's fascinating to watch you work all this out. Helps me understand other things that this vid really isn't about. Learning a lot. Thx.
I have a wing on the way this might be great in. It’s been listed in USPS tracking as in my town ready for delivery for 10 days. Think that’s a problem?
DroneRacer101 ...don't even get me started on the USPS. Hope it comes soon, looking forward to it.
Great detailed review. Really hoping to see it on a fixed wing with head tracking next. It's the tool I'm looking for doing formations.
I need fpv goggles bad but can’t afford any being a single dad with Christmas coming up. But those are awesome. Everyone have a good Christmas
you should get paid from DJI for this work ! Like you I have had mine for about a week. I have been using the goggles every day switching back and forth between Aomway and DJI. Thank you SO SO MUCH ! Honestly if you have both DJI AND" Race" quadcopters. the goggles are perfect ! you could go out flying for the day and combine/mix both platforms. I am now (thanks to your video and hard work) going to move forward with installing DJI module system on a Diatone TYRANT. My only question will it work with Taranis X7S ? The future will be absolutely AMAZING with this new technology ! PLEASE DJI make a "race" quad with your battery technology giving us 30 minute flight times ! the digital module is 1/4 the size of Connex and one half the price, and it also carries the sbus signal ! SO COOL !!
I'd like to see this on a long range 6 inch quad with some beefy motors, or a wing would be cool too:)
Thank you for this video! Very usefull! Дрон лежал 2 года, не знал как настроить )
(Russia)
I have a set on offer and was interested to see how they hook up to the Omnibus and exactly what info is displayed. The DJI term of “OSD” totally threw me....what they should say is “Telemetry UART”. Hopefully the osd will show much more info in future as it’s really disappointing how minimal it is on the current software release, the usual info filled DJI osd for long range navigation would be great. Keep up the great posts and updates as more features are added.
Well done sir! This is the only video breaking down the air mod in detail right now. You will be getting a ton of views after Christmas!
Thank you so much. Tell your friends. :-)
As I said below, great and helpful video. For a long-range quad you probably need big props, slow motors, big battery and probably minimal GPS to help get back home from the long distance. Price starts climbing up to almost the price of a Mavic and easily the price of a Spark. OcuSync Air is probably a good option for the long-range planes. Like you said not the best for racing. Maybe also good for just better quality video in local quad freestyling with less breakup, where long range is not so important. I need to do a build large enough to carry the extra weight. Looking forward to what else you find out about this kit.
I have speced out a 6 inch build in the description which will use iNAV. I found that the build I use here just needs a GPS added and it will be able to do everything I need for testing with iNAV. With more efficient props I think I can get this rig out to 1-2km and that will be a good lesson for building a longer range version. Or at least to know if it will go that far at all. It flew about 5 minutes on a 4S 1300 so a bigger, lower C battery will help it stretch it’s legs a bit.
More indoor race quads! and tiny whoop tutorials please
Sorry, noob question: On the DJI Goggles RE FAQ's, it says: Supported remote controllers: X9D (FrSky), DEVO 10 (Walkera), T8FG (Futaba), T14SG (Futaba), WTF09sll (WFLY), and AT9S (RadioLink). Does anyone know why the DJI Goggles air system would need to be compatible with your remote controller? After all, the air system is for FPV, not for controlling the aircraft, right?
Xplore RC You can also use it to control your aircraft. You will want to go that route if you are going to fly long distance.
So the way I understand this is that the ocusynk system is a RX and a VTX in the same time?
Humberto Montalban It can be used as only VTX, or you can use it for RX and VTX.
For long range I'd prefer a Fixed Wing aircraft. To bad you cant get the F4 OSD super imposed over the Ocusync image in the DJI Goggles
That is what I was expecting it to be and kind of disappointed it doesn’t pass that through. The recording is better without it. But I would really like that in the goggles. Telemetry the way it is can pass and display a LOT more data than it does. AND it needs to record that data so I have it after the flight.
I'm trying to set up the DJI ocusync air system with my flying wing. Any suggestions on which compatible flight controller I could use without soldering anything? I have a Taranis x9d plus transmitter as well. Also, if I don't have a power distribution board, where in the receiver would my positive and negative battery cables connect? I've tried plugging them everywhere and I can't even get the air system power light to activate. :-( DJI mentions nothing about needing a power distribution board for that.
Awesome video! Thanks for putting out this information!
I want to see fly live in acro and fly trough gates. But I'm also interest in a fast long range flight.
wouldnt it be possible to cut open the usb c cable on the camera and get osd trough the video signal cable?
Nice video, however I didn't noticed any OSD info coming from the FC inside the Goggle. Did you ever figured out that part?
top notch review, thanks, can i use this module with non dji googles?
Hi
I need your help
I have dji mavic 2 pro with DJI Goggles racing edition (the black one)
I’m extremely happy with it
But now I want to buy a fpv drone and use with my
DJI Goggles racing edition (the black one) and the remote controller which come with mavic 2
I would like to know how can I do that?
I see you also have some battery which last a lot for fpv drones and I would like to use those battery.
I’m not the expert to build it but I can build it if I have to ( I prefer to buy the ready ones if there is some place I can buy ready made ones)
Please if you can help me with this
Thanks
Shervin
Nice!!! Those are what i wanted!!! Great info!! Thanks for sharing !!
Just watched this several times near the end; the 960p through the goggles is far blurrier than through the Ocusync module. Is that because (and I hope this is true) that goggles recorder is not recording as well as what you actually see (which again hopefully, should be like what the Ocusync is recording on the quad before it hits the VTX). Agreed that there is no breakup or artefacts as in analogue, but a Clearview system can achieve much of that; what I want is a truly better picture detail and I'm not yet convinced that it's that much better than the best analogue systems. Really want to buy this system for our model race car tracks to let those new to FPV experience the best picture possible (and we don't care about latency too much because we drive at 25mph tops). That said , I have a Connex system gathering dust because the camera can't do changes in light better than a $15 dollar camera...this is a big improvement; not to mention the comfort and build quality of the DJI goggles...definitely the best of the box style. Your thoughts on the blurry picture at 960 at the end of your video?
I need to update all the firmware and test it again. There have been several updates. But I think the 720 looks better than the 960.
To me this looks like alot of work and expense for not much improvement. But i'm probably not who this is aimed at. Though very interesting so keep up the good work😁
Can you do another build or a more detailed walkthrough of this video?! I’m building this same setup for a longe range build and don’t care about the latency
Your the only video out for this and I would love another helpful video buddy!
Ice on the pond!
So cool that it has separate motors 😂
very nice video. thanks! going to put this into a gopro karma.. no, really! I was given a karma display unit, basically a shell, so I'm going to add this ocusync system and other stuff to make for a unique long range quadcopter. going to be fun to freak people out with how I'm controlling the karma with my x9d and viewing the fpv feed with my DJI goggles. LMFAO
51g extra is a lot for a 5" quad. Also, please do a proper latency test, like RCSchim does.
thanks best video of the world on the ocusync .
can you test the ocusync on the old white goggle Please it important for all people like me.
the video seem very compressed no details on grass and tree is it the same think in real or its youtube compression?
Thanks again
is it can be use with 2.4ghz tx and rx classic ? thanks
ON white Goggle how to change mode 720p 990p 480P ? thanks
The recordings are way more compressed natively than I expected. The files are tiny. I have been told that may change in a software release soon.
Sorry, I do not have the old goggles.
thinks , if you know someone who have white goggle it will be cool that you test different mode on it , because lot of people has allready the old one and watch all video like this to find the answer.
Can I use this ocusync system with flysky FS i6 or something like this???
Just bought the ocusync system and just need to buy the dji race goggles. Do you know where I can get the best deal on the or someone who wants to sell a mint set with all cords boxes and paperwork.any feedback would be great keep up the great work buddy...go Death Star 🤙🏻
Things that make u go hmmm. No brake up but seems to get blurry at times. Some of those DJI updates might fix a thing or 2. Not to bad , but do u have to use DJI googles or any googles?
For the OcuSync module you have to use the DJI Racing Edition Goggles. It’s the pauses that get me the most. In the open they were not a big deal, they were short, but racing down low they are an issue. If you saw the release video they did when these were announced, for that type of racing they are great. But not ready for MultiGP.
I’ve already ordered a walkera f210 RTF quad and the dji re googles.
Is the ocusync air system compatible with it?
Really interesting!
It is possible to use the TBS Crossfire system with DJI OcuSync Air ? Thanks
Yes, just need to wire up the unit to power video transfer and leave urat port to crossfire on FC. Same way you can mount it on car or boat.
Thanks for your video..wondered if there’s a way to connect the ocusync air system via hdmi to the hdmi output on a gaming console, satellite tv box etc to play games, watch tv etc wirelessly on the dji goggles? Thanks
justinspirational Just get a wireless HDMI from Amazon, hook it to the supplied cable connect it to your goggles. Bam!
an other video demo in fly please long range and throu the trees thanks
Do you know of any kits that are specifically made for the OcuSync module?
Thanks for the video. So these are strictly made to work with the DJI goggles? I was hoping to use them on a fatshark HD3. Also this unit serves as a receiver unit for my frsky x9d plus? If so, will I benefit at all if I have a TBS crossfire module on my remote for long range. Trying to do my first build sorry for the silly questions. Any help would be great. Cheers!
Jemdost DJI Goggles RE are the only goggles that connect to the air system. It uses 2.4 and 5.8
is ir possible to fly with only 1 antenna in france CE
So how are you powering yours?
Need more power to lift the weight. Don't think it is useable in racing, maybe good for a custom and stable camera drone.
As of the time of posting I agree. But this is really the first week of release of the first generation of the product. I forsee a lot of testing for this one in the future.
great job but how do you go into settings and ok here we have several settings and then there are clearly only 3? several means 7 not 3. but other than that great video
Several: “more than two but not many” 😉
Possible to bind with the Taranis X-LIGTE ?
What type of connector does the DJI camera have? It looks like a Mini or Micro HDMI? Can you confirm?
bauhaus it’s their special plug.
Does this module work with the white goggles?
Anybody see a separate Ocusync receiver so you dont need to pipe the feed directly from the goggles??
Awesome review.... first time I saw it... looks like it has potential for sure...
Thank you very much for the detailed video.. I'm attempting to wireup a similar setup with a betaflight f4 aio fc and have used uart 3 and set it as smartport on the lower baud, wired white and gray to rx3 and tx3 and I'm not getting any osd through to the goggles. Wondering if you have any other settings or I'm possibly missing something? any help is greatly appreciated thanks!
Make sure telemetry is enabled configuration. And you don’t actually need to slect Smartport. I was wrong on that.
DroneRacer101 much appreciated it’ll give it a check
Do you think the Ocusync Air Module can be hooked up to the F4PLUS2.0? www.gearbest.com/esc/pp_1025750.html I'm trying to figure this out, but I don't have any of the components yet lol
How do you star recording, power the unit
Im not drone fan.
Just looking for a cam that can record HD and be easy to mount and powered by USB
ladjkaoz Two finger double tap on the right side of the goggles starts the recording. It’s not powered through the USB.
If my flight control system doesn’t have range for 7km and I connect Dji ocusync it will upgrade the range to 7 km??
Jskskdn Sdnskdjd Yes, the signal transmission goes through the Ocusync to the goggles. You will connect your radio to the goggles and use it as a slave.
Looked like a lot of delay in the video I don't think I'd fly it close anything the split is a better bet for hd vid and for long range might as well use the dji it safer with return to home what do you think
I'm hoping with a few software updates they make it soother. There are just things you can do in Rate Mode with a real flight controller that you just can't do with a DJI drone. It may turn out that planes and wings are the real winners for this. Time will tell.
If the past is any indication we are about to see a new DJI Race Quad ! Giving us the 7km (advertised) range and 30 min flight times. not something you would crash doing inverted spins but something you might do high speed runs up a mountain or down the beach. DJI will NOT give up a market share.
Is it necessary to keep the training cable connected to the control and the googles ? Thank you
If you are using the goggles to transmit the control signals to the quad then yes you have to keep it connected.
Is there a way to hook it up to BF OSD or a Vector OSD instead of using the DJI one?
Not that I know of... yet...
I think I'll wait for the Eachine EV005.8/2.4 turbo air $200 version.😂😂😂 (P.S. I totally made up the model name, but sounds legit)
LOL, you had me going. In my notification I could only see the first part and thought I missed something.
Haahaa sorry sorta. Was a in good fun micro trolling. I do hope this becomes a good evolution for us though. even if it pushes another company to step up the game (looks at fatshark)
Will this work with the original dji goggles?
DJI says no. I have seen on youtube one italian geezer connected it to original white goggles, but there was no video signal
When they first came out DJI reported that it would work with the original goggles. You just have no analog signal receiver.
Great video. Quick question, what batteries do you recommend for a long range quad with the air module installed? Higher than 4s?
It depends on the components. And what you call long range. Several km and 5 inch on a big 4s will work. Past that you need bigger props and quite possibly a higher S battery to go with it.
I have several mid range builds in progress I will be going over eventually.
DroneRacer101 that makes sense. My build will be the tbs long range endurance motor with low kv and 7" props. I may go with a 5s and see house I go.
per the website those are supposed to be used with a 4s on 7 inch props
Yeah and 6s for 6", I wonder where the 5s fits into this picture.
Updates???
Does anyone know where to connect UART TX/RX ( White/Gray ) cables from Ocusync unit to KISS flight controller?
Sorry. I have never used a Kiss FC
Did you figure it out?
I. Also need to use with kiss Fs
Someone have do with success?
your video is in 30fps mode ... the video of ocusync is in 50 or 60fps ... please make an other video in 60fps 1080p to feel the rate of streaming. thanks
I plan to. I wanted the 4k so people could see the wiring and decided the full flight review really need to be a separate video.
4K unuseless
720p 60fps or 1080p 60fps
Did3D... Is that a word? Lol
Un = not, so it not useless, or usable! Or, worthwhile! OK!
Lol hApPy h0liDaYs!
"useless" sorry i m frenchy 4k is useless a good 1080p is already good
Antennas were crossed; coax was bent :.( hahaha, probably does't make a difference. Just DJI trying to cover themselves
yea, we bend antenna all the time so I think that part was probably ok. If they said you could bend it I can see some people kinking it 90 degrees. Mounting antenna is probably the worst part of it. I see thingiverse in a lot of people’s future.
Way to complicated for a simple race quad
Yea, I don’t think this is going to be popular for Betaflight racers. That is why I am exploring it with iNav.
You mind adding 'uploads' to your home page? When I click on you in subs, I then have to click on videos to see your most recent. It would save me a ;click'.
Done! :-) It was due for an update anyway.
DroneRacer101woot. thx. The app loads videos for me as default. PC doesn't.
But it's cool having a 7inch...... drone
OPEN IT UUUUUUUUPPPPPPPPP !!! :)
DO NOT BEND THE ANTENNA ≠ DO NOT BEND THE COAX
郭牧楠 It’s okay, just don’t bend them too tight.
These are a gimmick seriously! The latency alone is horrible and the lack of diversity, no fan,no extra batteries, heavy, LHCP analog antenna, heavy module, proprietary antenna (we break antennas as you know) and the 1000 gram weight of the goggles themselves! do not make these racing anything... If you flew your machine like most do around trees when freestyle then the latency would show up big time anything over 10mph.. I think these would be great for high flying wings but not for "racing" Also the FOV is way too big for shooting holes in trees or gates. I think you know EXACTLY what I'm talking about ;) put this on your HGLRC LOL
Oh I agree that was pretty much my conclusion. For now they are not gate racing. That is why I am building a long range rig for these. My GPS just arrived. Now I need time to get it mounted and install iNaV.
Maybe their next version. There are alot of goggles coming in 2018 and I think a couple of companies are really going to challenge fatshark with price and performance. I think Fatshark will also surprise us this coming year as well as connex.... DJI doesn't understand racing as shown with "snail propulsion system" /rolleyes... next thing you know they will release the turtle FC and Sloth 5 inch frame designs... to go with their laggy helmet..
I think they will release a Phantom R to go with these. But if you look at the release video for these you can see what they are calling racing. It's race to that point and back. These are fine for that. But I don't plan on racing them through gates. I do think I will use them a lot this winter though. The flip up design will be really convenient for flying outside with snow on the ground. I can wear my glasses and just flip them up to land LOS.
The dji vtx is toooo big 👎
6inch or 7inch no not that prop size
So which size do you want to see?
7 more flight time?
I'm still researching but it seems like there are overall better options right now for a 6 inch.
Yeah that make sense
I fucking hate DJI, I wish we had another real choice.
Second
#nonotificationskwad
Too complicated and expensive. First crash you'll break something and DJI will drain your wallet for replacements...