Can u cut the sleeve to go lower? So the treaded sleeve and not the spring. Or will the shock blow when cutting the sleeve underneath? I am maxed out on those things but I want to go lower
I don't have max speeding rod coilovers, but the only way you're going lower is likely different coilovers. A company makes drop forks for the front, but nothing for the rear. I'm on skunk2 Pro ST, and even at the highest setting, I can't put one finger between the tire and fender. My header is about 3 to 4" front the ground.
Trying to sneak one past us? You might want to read some of the technical articles on MotoIQ regarding suspension design, et al. And, thanks for the link. Well Done, Billy.
Loved the vtech sounds at the beginning!!! #staymad!
👊🤬
The cleans lines of the interior (CRX). IMO, aesthetics were better back in the late 80s and 90s.
And that gearbox xx.
Better put sum lock sealer on the bolt on top of the coilover. Ive had 2 sets and they both got loose.
This is interesting. I've had 5 sets and watched tons of videos on the t7's and never seen them with blue springs.
yeah T7s are supposed to have thicker grey springs with firmer spring rates
Can u cut the sleeve to go lower? So the treaded sleeve and not the spring. Or will the shock blow when cutting the sleeve underneath? I am maxed out on those things but I want to go lower
Thought about that. I'm pretty sure that that part of the strut is filled with hydraulic gas.
I don't have max speeding rod coilovers, but the only way you're going lower is likely different coilovers. A company makes drop forks for the front, but nothing for the rear.
I'm on skunk2 Pro ST, and even at the highest setting, I can't put one finger between the tire and fender. My header is about 3 to 4" front the ground.
@@Billy_Built true that
I can only get the base(yellow) ones for my 2003 toyota camry
awesome video！
Thank you 🤗
I need new camber kits. Cuz these just won't sit rite for me
I cant get these to sit rite. Its driving me crazy
Nice crx
Thanks!
Dude needs to give feedback on the performance of the new rods
There are no rods in this video..
Soooooo what did you think of them????
I like them. For the price you can't really complain
Trying to sneak one past us?
You might want to read some of the technical articles on MotoIQ regarding suspension design, et al.
And, thanks for the link.
Well Done, Billy.
Can't slide nothing by you!
I'll go freshen up! thanks!
Luv ys man but just sell that pos to a poor guy n put moar $ into the z ;)
Heard this before🤣 love this car too much
A CRX with a B16 is not a POS. You cannot measure the fun factor of the golden era 80s/90s Hondas. That CRX is only getting more rare. Keep it Billy.
@@rudimerm7686 An average crx can fetch 15k+ in australia, they're gettig rarer and rarer
Me too but they just have no idea, do they? Heheheheheee!!!! @@Billy_Built
Yes, you don’t want to be the guy regretting they sold theirs, like so many on YT comments. @@rudimerm7686