@@LoganLong6620you're so young. How can you possibly say your electrical kit is overkill? Internal combustion engines are electric machines that burn liquid. Electric part is more important than the fuel part.😂😂😂😂😂
I got 52 years of tools. Your is one of the nicest complete collection that can accomplish a lot of work. I would say don't do any sell off of things you don't use often, in time you will be glad you kept them Thanks for sharing!
I'm an A&P, totally agree about Gearwrench. I got the ratcheting wrench set from recent, the 90 tooth, and they haven't let me down yet for what I need them for. I had an older set a few years back and you can definitely tell the difference.
Don’t sell your tools. I have all those tools and more. That 3/8 comes in handy working on valve trains. I think it was 07 when snapon came out with the flex head vibrating beeping torque wrenches that do ft lbs nm and angles. Not something we use every day but it makes you a better mechanic. Nice tool box.
I see you use your 3/8 Milwaukee m12 impact quite often, if magnets and a boot were to be made for the battery where it would be similar to the snap on unit, do you think it would work, stand up to the stress on the battery latches?
I would be interested in hearing... when people say as you did... this Gearwrench is not as good as the Blue-Point but it will work... what do you mean? How is it not as good as the Blue-Point? I seems that many just state that because it is not from a tool truck it is not as good since no one ever justifies the statement with any proof of sorts. I dont think anyone can argue that Snap-On makes a good tool, but some justifications for use would be great.
That Gearwrench set I have is like 5 years old. My only complaint is on the bigger sizes the ratcheting mechanism is junk and will either catch or randomly switch directions during use. I wasn’t comparing them to any tool truck brand I said in the video the newer stuff by Gearwrench itself seems of a better quality. I wouldn’t be afraid to try any new Gearwrench tool.
It’s a 56” box. I’ve had it for four years and it’s held up well really no complaints. The only thing that I would like better is if the two wrench drawers was one long drawer like the top. Not sure who makes em for Deere.
@@austinmoore1689 that should look pretty sweet. I put the tractor decal on it myself cuz I have a 4430 so you could put any model number on. A 4455 logo would look sexy.
People buy 7 dollar coffee’s in the morning! Tools last a life time! Enjoy your self. Great setup
Hahaha good point! Thank you.
@@LoganLong6620you're so young. How can you possibly say your electrical kit is overkill? Internal combustion engines are electric machines that burn liquid. Electric part is more important than the fuel part.😂😂😂😂😂
I got 52 years of tools. Your is one of the nicest complete collection that can accomplish a lot of work. I would say don't do any sell off of things you don't use often, in time you will be glad you kept them
Thanks for sharing!
Thank you!
Better to have it and not need it than need it and not have it. My brother always said it’s worth having just to say you’ve got it.
@@LoganLong6620I just saw you have ball end Allen keys . You're fired. They round off everything they touch.
I'm an A&P, totally agree about Gearwrench. I got the ratcheting wrench set from recent, the 90 tooth, and they haven't let me down yet for what I need them for. I had an older set a few years back and you can definitely tell the difference.
Solid collection. Love the box.
Thanks!
Nice set up and great job with the tour video!
Thank you
Love the work table...
It was worth every penny and a fun project.
Sharp box and nice tools!
I got that mac bit set mine is the 121 piece rbrt set love it....actually got a ton of the rbrt bits best ever. Get a master set if u gonna get them
Yep, sometimes I just rub my Snap On vise Too! Nice collection.
awesome collection
Thank you
Hell of a set up
Thanks!
Sweet setup buddy! 👍👍
Thank you!
I just got that same creeper today. Ordered it a couple weeks ago, already love the thing
It makes it suck to use 1 without a adjustable head rest haha
Very nice thanks for sharing! Tools are an investment hold on to them take care of them and they will always take care of you! 👍
Couldn’t agree more!
Who makes the John Deere boxes? I love the drawer latch design on your box.
Montezuma
Don’t sell your tools. I have all those tools and more. That 3/8 comes in handy working on valve trains. I think it was 07 when snapon came out with the flex head vibrating beeping torque wrenches that do ft lbs nm and angles. Not something we use every day but it makes you a better mechanic. Nice tool box.
Thanks for the advice!
NIce quality throughout!
Great tour!!! thanks for sharing
No problem! Thanks for watching
I spotted your stash for the North Office at 7:54
Nice setup...
Thanks
I like your jd tool box, I hope the dealer gave it to you at cost.
I'm a Case guy, but that's a sharp toolchest (and admittedly, my push lawnmower is an old Deere).
Thanks! I like some older IH stuff
Thanks for sharing! I found some new tools that I now “need” all of a sudden lol what made you wanna back to the farm?
Haha I have that problem too. Being on the farm is my passion. Also got lucky and found the right folks to work for.
What’s your workbench measurements?
what are the dimensions of the steel table top? 3' x 6' ?
Ack red tool box what brand is it where buy it
Do you have a part number for that Mac box you have your electrical tools in? Thats a good idea.
MBTS295
I see you use your 3/8 Milwaukee m12 impact quite often, if magnets and a boot were to be made for the battery where it would be similar to the snap on unit, do you think it would work, stand up to the stress on the battery latches?
Thats hard to say. I could guess but that doesn’t mean anything haha
I love green nice
Where did you get the electrical box I can only find information on it from china
Got it off the MAC tool truck.
I would be interested in hearing... when people say as you did... this Gearwrench is not as good as the Blue-Point but it will work... what do you mean? How is it not as good as the Blue-Point? I seems that many just state that because it is not from a tool truck it is not as good since no one ever justifies the statement with any proof of sorts. I dont think anyone can argue that Snap-On makes a good tool, but some justifications for use would be great.
That Gearwrench set I have is like 5 years old. My only complaint is on the bigger sizes the ratcheting mechanism is junk and will either catch or randomly switch directions during use. I wasn’t comparing them to any tool truck brand I said in the video the newer stuff by Gearwrench itself seems of a better quality. I wouldn’t be afraid to try any new Gearwrench tool.
What's the # for the Mac kit with the bits and ratchet driver?
SBDR121RBRT
Did you go threw the John Deere AYF program?
No I went to our local community college. If you for sure want to work on Deere I would definitely go to their program though.
Good setup
Thank you!
@@LoganLong6620 your welcome. Why u getting out the mechanic field
@@shepherdsfleetservicesllc8147 The shortest answer is I enjoy farming full time a lot more.
@@LoganLong6620 I miss it also. Mechanic and farming kinda goes together
Do you have the model number for that Deere box?
AC-5625CB-G
what toolbox do you have? is that made by john deere, has it lasted you awhile?
It’s a 56” box. I’ve had it for four years and it’s held up well really no complaints. The only thing that I would like better is if the two wrench drawers was one long drawer like the top. Not sure who makes em for Deere.
You didn't need any 3/4 drive sockets ?
Not on a daily basis. When I did I either borrowed or used the shop set. Would nice to have a set but man 3/4 is expensive.
Something I've heard lots is "spend the money on your everyday money makers, but if it's a rare occasion item grab a budget version"
This guy talks just like Ragnad.
Where that John Deere box come from
John Deere dealerships can get them.
@@LoganLong6620 that’s cool as hell might have to go to one so I have something that matches my John Deere gas pump
@@austinmoore1689 that should look pretty sweet. I put the tractor decal on it myself cuz I have a 4430 so you could put any model number on. A 4455 logo would look sexy.
Want to know about the tool box not the tools.
Bet you got a rich dad…..or yo wife got an only fans 😂😂😂
What's the part number on that MAC set w/ the ratcheting screwdriver?
SBDR121RBRT