What you need to know before you invest in a power tool brand (Pro vs DIY vs Prosumer)
HTML-код
- Опубликовано: 20 май 2024
- One of the most asked questions in the tool community is who makes professional tools, and who makes prosumer and DIY Power Tools. You don't want to over spend on a tool that you don't need, but you also don't want to under spend on a tool that won't get the job done for you. In today's video, I will cover each tool brand and let you know who is pro grade, who is prosumer grade and who is DIY grade.
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
Which Tool Brand do you use?
Dewalt!
Milwaukee. Specifically M18 platform.
Milwaukee M18 & M12 platforms. Just depends on what I'm doing that day
Tool Review Zone.. I use Ryobi and Milwaukee. Ryobi has been just as good.
Mostly Makita, Hilti and Bosh Professional but Milwaukee is hitting very hard on the Finnish market too.
Buying Ryobi because I can't afford to spend double the money on 5% more performance with deWalt or Milwaukee. But the best advice I heard is buy the cheap tool first, if it breaks, then you actually use that one a lot and it's worth it to upgrade.. if it collects dust, good thing you didn't buy the pro stuff.
That’s why I bought a hypertough drill..i only need it for light duty things, and in the past three years, I maybe charged the battery once. No wasted investment there lol
I was a Ryobi owner, but they sold me a couple bad chargers that destroyed my batteries. Not a bad strategy on the tools, but if the battery chargers are bad, it’s going to go terribly wrong.
Hilti service is terrible 😢
Terrible advice. My dad has tons of cheap tools and he spends more time working on the tools than on the job. Buying good tools that should last me a lifetime was a great investment.
Sounds like your dad forgot the exception to the rule.. some people say “always be frugal, never be cheap” I would say how much you use a thing should be considered before buying either the cleapest or best line of tools.
Honestly as someone that works in construction if you're just starting I would recommend picking up whatever pro grade brand tools your coworkers use, you will almost certainly need to borrow tools/batteries when you're starting out and everyone using the same tool brand makes that much easier. MAKE SURE TO RETURN THE TOOLS YOU BORROW AT THE ENDOF THE DAY.
If you're just starting out you get the brand your coworkers don't have so your stuff doesn't grow legs and walk away, protect your investment. My buddy made the mistake of buying milwaukee and he "lost" several batteries and an impact before spraypanting his whole toolkit pink
I was working on my barn’s roof in Autumn a couple years ago and I accidentally left my DeWalt impact drill up there. Winter came along, then summer. I thought I lost the drill at a job site. Then I went back up on the roof of the barn that next Autumn to fix any leaks and there it was all faded from extreme sun exposure on the metal roof. The damn thing worked just fine and the battery was fully charged! I still use it today and it works wonderfully.
Modern brushless tools with lithium batteries are very durable. I saw a video of a milwaukee that was in a house fire and half melted to a bench that still worked just fine.
my Dewalt brushless impact driver was semi broken at the handle and i gotta use tapes to put them together. Summer using involved lotta mud and dirt so I decided to shower it with garden spray head, shake shake air dry then ... The speed selections went nut but after 1 week, it decided to work normally. I'm like: so the plastic shell is garbage but the motor and battery are quite good.
Started as contractor like 10 years ago with Dewalt tools. Few years later was thinking to move to Milwaukee when my Dewalts start breaking but damn tools dont want to break whatever I do with them 😂😂
amaze
@@Nick-sx6jm The fact this man's house burnt down, plus his workshop and tools (I'm assuming that's his source of income if he has Milwaukee) and he STILL thought to test the melted drill shows that it's some sort of primal drive in our DNA
I bought Ryobi because everyone just said by the tool you need with the money you can afford to invest in tools. I bought it with full intentions of upgrading to makita after the ryobi broke or started to fail. 8 years later the ryobi still hasn't pooped out on me yet. I even dropped the drill 15 feet from a ladder by accident 3 years ago and it's still working.
Yea you probably use it once a year
@@danielredziniak2996 no, it's because most of the power and reliability of the expensive brands is unnecessary. You're just like a kid who buys Apple products because the brand is a fashion statement.
@@presetregret184its not unneccesary at all if you are using them for more than just random stuff around your house. ryobi is fine for that, but not for construction work where you plan to use it all day and be fast. its a massive difference for that application, and well worth the price difference. thats why you wont ever see ryobi power tools on construction sites. and this is coming from a very frugal person that refuses to buy apple products for the same reason you mentioned
@@danielredziniak2996well yeah. Why waste money on Milwaukee if you're only going to use the tools a few times a year? Ryobi is perfect for that.
@@presetregret184lol
I’ve transitioned to all Milwaukee. Batteries are amazing. You can almost always find deals for free tools/batteries and except for cleaning triggers on 2 tools I’ve had no issues. Been running the 1/2 impact, 3/8 impact and impact bit drivers professionally, daily since 2017. Still going strong.
I started with Ryobi because the tools are affordable and they are good enough as entry level contractor. I started my own Handyman business and now I use them more than ever and sometimes really big jobs. What I can tell you is they can definitely handle more than you would think. That being said a couple tools have gotten damaged so they are being replaced as needed by Milwaukee and it's clearly a massive upgrade but Ryobi is no slouch with their HP line and HP batteries.
im a milwaukee guy but if you already got ryobi i say stick to it and any skilled trades person will agree all tools are pro tools all that matters is the best warranty you can get and if the tool can do the job. i have a few nice tools like a mac tools ratchet but i would say 99.9% of the work ive done with it couldve been done with any flex head ratchet. good luck in your entrepenurship
Funny I’m doing the same thing
Keep an eye out for a really good deal on a combo kit. I got a solid start on DeWalt kit; $300 a 6¼" circ saw, then 4 brushless atomic tools: drill, impact, orbital sander, and oscilator/mulitool. It also came with 2, 4, and 5ah batteries with a single battery charger (not rapid), and a carry bag. I got some Hilti tools for free, but have to fix the batteries, luckily scavenged some 18650s from a bad hoverboard, and a bad vac. Just gotta modify the battery case now (original fit was tight and I have to widen it a couple mm to account for the wires). Main gem of it is the rotary hammer and a bunch of masonry bits. Point is keep a sharp eye you just might get lucky.
One more thing is the only grade I disagreed with was the ryobi one; imo they're prosumer.
Haha so crazy i did same thing lol
Started ryobi went straight Milwaukee
My employer provides me Dewalt but once i held a milwaukee i was a fan
I use ryobi. Do alot of concrete work so if it breaks, I can always go for the "buy one, get one free" deals. Needless to say, that was 9 years ago. Original set still going strong.
Only thing I'd say is for concrete work there's simply more powerful options that will make your job smoother. There are certain tools I've used over the years of ryobi, like the sawzall, that were sufficient, but upgrading to a pro tool was night and day. A proper rotary hammer from milwaukee, makita, hikoki, or dewalt will get you a lot further
Milwaukee as a whole is professional grade. They don't win in every single tool category, but they are close. There power and reliability are unreal.
Love everything about the video. The history, the slideshow, and the transparency of it all tied together real nas like. As a long time tool enthusiast myself, I didn’t expect to learn anything on this video. I couldn’t be more wrong. Lots of fun facts. Thanks for sharing it.
The most click baity thumbnail of all time 😂
My dads used Ryobi drills for years, primarily working on windows, doors and conservatories. He's never had any major issues still uses Dewalt for his table saws and such but I think for some use case the distinction between DIY, Prosumer and Pro for every product done by a brand is a bit vague. I know my dad hated Dewalts cordless drills because if I remember rightly they had a stupid battery/charger design that constantly broke and he was expected to pay a fortune to get it repaired or buy a new one whilst new batteries for a Ryobi were far more affordable at the time. I could be wrong though been a long time since I remember him ranting about it.
I’m an active DIYer, meaning I use all my tools on my days off of work. The first battery drill I ever purchased was a Ryobi 18volt (and it was before Lithium batteries were available). I have purchased lithium batteries now, but I am still using my original drill! That is money well spent when the tool pays for itself over the many years of heavy use!
Damn good video - I appreciate the information on the history of the brands and their divisions, as well as where they would be typically found in everyday use. For the vast majority of folks (those who aren't apprentice level or higher in the trades) DIY will be a good choice, I myself own DeWalt, Ridgid and Milwaukee Tools. I tend to be a little hard on my tools
so the "Prosumer/ProGrade" works well for me. Thanks for also covering Metabo Hitachi a line of tools I knew little about. Keep up the great work 👍
Each brand has its strengths, find the one that excels at what you do the most, and I’m sure the rest of their line will be sufficient enough. It’s nice now that you can basically have one platform for everything and its unlikely any of it is going to totally suck.
You are pretty safe with the Big 3 in North America, Makita, Dewalt, and Milwaukie for about 99.99% of use cases. I have a hard time justifying the "pro" brands like Festool and Hilti especially because where I live has repair and distribution centers for all 3 brands, Hilti, Snap on, Mac, pretty much everything but a local festool center. So the allure of a "pro grade" Hilti in that the seldom break just isn't there. I am a M&M user though, Makita and Milwaukie and primarily because I am invested into both battery platforms. But I have friends who use dewalt and do own some corded dewalt tools. I haven't really been let down by any of the big 3 yet... except for angle grinders but as a welder I view those as consumable tools that have a 4-6 month life span.
All the cordless grinders are pretty much disposable. I run dewalt at home, Milwaukee at work. I'll bet we go through 2 Milwaukee grinders/year at the shop...and I'll bet I get a new dewalt every other year at home.
For whatever reason, the Milwaukee porta-bands are pretty much indestructible compared to dewalt though. I'll bet I've killed 4 yellow ones (both sizes) and I'm still running the original variable speed Milwaukee that was at the shop when I started working there.
Jumped down, mostly, from Snap-on to Milwaukee. Still pro grade with better warranty, better accessibility and a lot more power tools to choose from. So far I'm liking it.
Id argue in recent years Ryobi has stepped up to prosumer at least. Their tools are getting far better quality and durability. Also the same battery for every tool makes it very convenient on the job site. I'm an auto mechanic and i use ryobi while my other guys use Milwaukee or snap on. I still get my job done and today i surprised them with my impact wrench which in their mind was whimpy but after taking a torque wrench to it they got wide eyed when after just a 1/2 second of hammering it would tighten lug nuts up to 180. For context tires should be tighten up to about 140.
Felt good to see them walk away just all surprised like i just performed a magic trick
As a diy i bought one of those craftsmen 20v sets. No complaints. After 2 years now they all work great still. I use the drill, impact and saws all the most.
You are in the zone...the Tool Review Zone featuring Professor Clint. Excellent video, informative with great perspective. Thanks 😊
When I first spent thousands of dollars on tools for my construction business I chose Dewalt because they were the only ones with a service center in the area. That made warranty exchanges and repairs (which are inevitable no matter what brand you use) very simple and included over the counter battery swaps for crap batteries. They were also the only ones with a cordless table saw at the time. After a few years the service center shut down :( so I started buying more and more stuff from Home Depot, and was less intent on remaining all yellow. My van now has a ton of Milwaukee m18 and m12 tools. I can run my red tools with my yellow tool batteries via a 20$ adapter if need be, so its a very good system for me.
Which adapter do you use?
Nice!
Whats your experience with the Milwaukee M18 surge? I've multiple collet issues
@matthewgiddings7280 I use generic ones that don’t have a brand name for my m18 tools. Although I made sure I didn’t buy any adapters that have the USB port on them because they will continually draw current from the batteries is left on.
@matthewgiddings7280 my wife has a few ryobi glue guns and things and the adapters I use for those are branded “badaptor” I think. Those are great and low profile.
I’m a licensed electrical contractor and it’s mostly Milwaukee here at Classic Electric. I have Dewalt woodworking tools in my garage workshop. I also have some Makita and even some Ryobi Link stuff.
Love, Ryobi inexpensive tool easy to replace. I’ve had their 18 V platform for two years and never had an issue gets the job done.
Not the best tool out there but don’t feel bad when it breaks
I use Milwaukee FUEL exclusively. Over the years I watched my mechanic work on my vehicles with Milwaukee tools and was always impressed by the power of the tools. I now own Milwaukee FUEL tools exclusively and they have yet to disappoint. FACTS
All my power tools are Ryobi and I have no issues with any of them. They do what I want when I want.
My ryobi kit from over a decade ago is still goin strong! Only thing that died was the vacuum and that’s cuz I didn’t ever clean the filter 😂
Great video. One thing that is worth mentioning is that its always best to take future tools into consideration. Its great to start cheap and upgrade as tools wear out but its not always so easy with the cordless stuff when it comes to battery compatibility between different brands. In my country Ryobi has a line of tools in each category (similar to Bosch) but the DIY line does not have battery compatibility with their more pro tools.
The best general brand review i see, is good definition of the brand offers
hands-down, the best comprehensive explanation, history of the major power tools.
I work in underground utility construction (sanitary, watermain, storm water installation etc.) and I can say I’ve never used anything but Makita. The drivers and drills get consistently drowned, dropped, thrown, beat up, have mud and concrete on them and they keep going. They are on the higher end but I’ve never had any issue with them. That being said…when we haven’t replaced one of our Makitas, with another Makita, we replaced it a DeWalt and they are also a well made brand. I have Ryobi at home but I wouldn’t bring it to the job site. Makita and DeWalt is the way to go from someone who constantly beats on tools. (Yes I realize I should take better care of the tools, but sometimes you’re just in a hurry when you’re breaking mega lugs in a 9’ hole that’s collapsing because your operator didn’t want to put a trench box in. And yes operators like that exist.)
Been a handyman for over 2 years now and I use Bauer of all brands. I have a harbor freight right near me and if anything breaks (only a drill and grinder so far) it’s cheap enough to replace. Their warranties are cheap too so I just buy the 2 year warranty for any tool that breaks and I replace.
Thanks for all the time & work you put into this video, just wanted to mention that Dewalt has some cheaper brushless tools that aren't even prosumer grade, but I know if you are talking about most of there tools, pro grade would be correct, but that brings me to my next point some of Craftsman Brushless tools are just rebranded Dewalt's, so I think for the brushed Craftsman's tools those are DIY tools, but I think there brushless should be at least prosumer grade if not Pro Grade, Thanks again
I use all Ryobi tools (for the most part) for car audio installation
Been solid for years! Some specialty tools Ill get milwaukee snap on etc when needed
I use Ryobi because when I started doing stuff with power tools, someone bought me a Ryobi drill, and as I bought more tools, I figured if I keep using Ryobi, I never have to worry about having a compatible battery. As long as I have A battery
You covered a lot of ground and History. Well put together, well thought out and concise. I am impressed and this is good information. Thank you, Clint. I have my concentrations mostly Ridgid and some Ryobi. Ridgid is a prosumer brand and with some help of the internet dictionary, "an amateur who purchases equipment with quality or features suitable for professional use"-Prosumer. Ridgid's new release of Bench and Stationery tools has a mix of Delta Machinery tools. I own the Delta Table saw which is the New Ridgid Table saw. Delta is owned by the Chang Type Industrial CO. Ltd. Just thought I would share that information. Ridgid Ron
This big brother, you should be a related person in the tool industry. You even know a company in Taiwan. I worked in Changtai many years ago, but DIY tools have gone to the road of Evergrande.
Great job. I think the biggest lesson in all this is, what are these companies producing today and how does it fit my needs? Craftsman, how a giant has fallen. Hercules, the latest David in a world of Golilaths. Flex, flash in the pan or are they here to stay. Festool is raising the bar but how high before the other titans can step up their game… Most importantly, We got Clint to let me know what the real deal is. Thanks Tool Review Zone!
I have tons of Ryobi stuff. I’ve had good luck with it. I use my impact driver and half inch impact the most.
Have had the same Milwaukee portable drill for the past 3 years. Beaten the crap out of it and it still shows me that same day 1 love
Well done video. I work at lowes and it’s fun to purchase new things for friends and family so I got my brother a FLEX combo kit…good tools…overkill for him. I use Bosch…I authorize A LOT of craftsman returns. It’s all fun and fascinating. Thanks for the vid!
I like Makita as a homeowner because they have a huge line of accessory and oddity type tools that go with the 18v system. Yard tools, inflator, radio, etc. and their saws, drills, are also pretty stout.
18v coffee maker
Makita is a titan in a pro enviroment too imo. I am team makita as an electrician and they make excellent tools.
@ERP are u residential and commercial? I'm commercial and industrial as a electrician apprentice. Just bought from Makita due to getting my first power tools now. Wondering how they hold up and ur thoughts
@@mateoandkaralinevillarreal139 I don't use the cordless versions of Makita (german Metabo instead, because of battery capacity) but the corded versions are almost up to the lower Hiltis.
Makita have legendary reliability and excellent battery technology. They're also not owned by a massive conglomerate like Hong Kong's TTi. Milwaukee SOUNDS American... but in the end, it's Chinese all the way.
Yes, Makita make some stuff in China as well... they all do, but I'd trust Japanese R&D over cost cutting I've started to see in some of TTi's stuff.
a more structured list:
DIY:
Ryobi, Hart, Bauer, Craftsman, Black and Decker
Prosumer:
Kobalt, Rigid, Skil, Hercules
Pro:
DeWalt, Milwaukee, Flex, Hilti, Festool, Skilsaw, Makita, Metabo, Bosch
So I was all Milwaukee for a while but I've recently come into doubt concerning their impacts. At our job we drill 3-5k #10 war coated screws into a litany of steel gauges at a fast pace daily. We pitted the red vs the yellow impact countless times and the dewalt 20voltXR was leagues ahead. Just a stronger drill. Don't really give a shit about the battery life if you have production levels of batteries to change out at your disposal. 🤷♂️ prove me wrong.
I mostly use Makita tools. I find it interesting that many company's have such different lineups worldwide. Here in Germany Bosch has still the green lineups for DIY, your Metabo HPT is Hikoki, FLEX is red with different tools (flying under the radar)
is your avatar name GUNSHIP? GUUUUNNNSHIP
@@mos8541 yes :)
I have been migrating everything to Milwaukee M18 line for use on my farm. These are durable tools and worth the $$ for me.
I am a Fence & Deck Contractor. In the job trailer all our power tools are Kobalt 24V with the exception of our miter and table saws, which are Bosch.
I am also a finish carpenter on the side as well as do woodworking at home, and have all Ryobi tools for that trade.
The Kobalt cordless stuff is serving us well, and the massive Ryobi selection of common and niche tools make it a no brainer for personal stuff.
I'm a dork and I personally enjoyed this and it was pretty informative thanks for covering it.
Great video! I’ve been using a Flex impact and hammer drill all year, and they’re still running just as strong as the day I bought them. I’m actually very impressed with them. Longer battery life than DeWalt, more power (easier to start and drive screws, even 6+ inch lags), batteries charge in 30-35 minutes, and great durability. I will definitely be buying more Flex tools as needed.
I rarely heard of flex until after I started buying milwaukee. But I’ve literally never heard a bad thing about them, only good things. Might get some of their tools if I could find a good kit deal.
The tools I use are mixed. I have a blend of DeWalt and Makita, tending towards makita's lineup that uses the same batteries.
lately I've been investing more in Festool, but solely for my woodworking. They are simply amazing tools, and if I have to save a few extra months to pay for it, It's worth it to me. But I take care of those tools, and for daily house use it's usually Dewalt/Makita
My ryobi drill lasted a while but the selector broke. Went milwaukee and huge power difference. One key tech is also way cool, you can program settings into the tools. So, red all day
I’m a Master Plumber and have used several different brands, but have all Milwaukee now because they have alot of plumbing based tools and just easier not having to worry about keeping up with different brand batteries
I use Milwaukee at home and for my small fine woodworking business. Is it too much tool for that? Probably. But will I ever need to buy another set? Probably not. Unless my small business can grow into more than a side hustle, then I’d gladly buy more, but it’ll still be Milwaukee in my shop.
Couldn’t agree more! I had a set of blue Ryobi from 2010 that it was time to upgrade as there were things I was doing that they couldn’t get done. I was weighting green Ryobi vs Milwaukee and I had to go Milwaukee. They’re not that that much more expensive than Ryobi HP and I’m confident my tools will get ANY job I need done. (I still like having Ryobi batteries for tools Milwaukee doesn’t make it power isn’t a concern). I have 0 regrets. Buy once cry once!
@@billsedutto8824 I have some older green brushless (non hp) Ryobi tools I keep around as loaners. They’re not bad, but like you, I was pushing them beyond their limits and was smoking them. Like the old saying goes, I’m not rich enough to buy cheap tools lol.
Yeah they are overkill but just run 2 brands. I have Dewalt and Ryobi I will probably buy mostly Ryobi from now on as they have gotten very good recently and I don't work in the trades.
I have a set of ryobi tools and a few Milwaukee ones. In some cases its too much tool but in some cases (like a drill) you'll be annoyed with low quality, trust me lmao
@@brandondickerson2687 coming from a Milwaukee guy, I can tell you first hand, the new Dewalts that are out and still coming are fantastic. My step-dad uses Dewalt while i use Milwaukee, he recently killed his drill, so I bought him the brand new Dewalt drill. He was blown away by it. I was really impressed with how far Dewalt stepped up with this most recent gen of theirs. I look forward to more from them.
Makita also has a prosumer/DIY line called Makita MT. Much cheaper tools, but the bang-for-buck remains high. Great for people starting out their tool hoarding journey.
Thanks for the historical context and the Clear distinction between the numerous brands. Much appreciated.
For the average DIY-er Ryobi offers a good line up and with a 6 year warrantee they'll probably last either for as long as you like or until something ground breaking comes along to entice you to upgrade to one of their new models.
I work in heavy construction and you are right HILTI is the best, they also come to the site if there is an issue with the tool. In order of commonality on the job site after HILTI its BOSCH, DEWALT, MAKITA, and HUSKY at the very low end. SKIL tools you find are mainly heavy chainsaws and related tools, it is and excellent brand for saws.
When it comes to corded tools, I'm all over the map. I have a Bosch table saw, a Dewalt chop saw, a Milwaukee hammer drill, etc. But my cordless stuff is almost exclusively Makita, because the batteries interchange with a bunch of very good yard tools, and in particular that Makita electric chain saw is just awesome for somebody who needs a chain saw every now and again. When I first started out I bought Black & Decker stuff because it was cheap and so was I, but I soon learned that the better quality tools designed for professional use last essentially forever when you don't use them hard every day, and it is better to buy once and cry once. I don't think there is a vast difference in quality among the pro-grade stuff, but look carefully at the full lineup of tools you might want at some point before deciding on a battery platform, because once you have 10 batteries, you are going to buy that brand of everything, forever. It makes no sense to have a different set of batteries, chargers, etc. for different cordless tools when everybody makes one of everything now.
I roll with milwaukee cordless but I don't think I'll find a better table saw than the dewalt 8 1/4. Best fence, and adjustment and lock is right on every time to where I don't ever have to check with a tape. I do high end kitchens and finish work and it does a hell of a job
I love my Black+Decker Matrix system tools. Perfect for a DIYer who just doesn't have the space and budget for a ton of power tools.
I am a home builder remodeler. We've used Ryobi for 15 years. Definitely not just a diy brand.
I am jumping on the Ryobi band wagon. Started when my brother gave me a small kit like 25 years ago. I still have that blue drill and use it constantly! Not even a p### whatever. Something like a WA model number or whatever. It's old and works. A number are still blue, but keep adding/replacing with the green. Like others, I appreciate that their batteries use the same casing and are backward compatible, so the 18V lineup still works. Also in agreement with others, they are cheap. Consumer Reports had them at a value buy. They punch above their weight class, yet don't break the pocket book so you can buy more of them. Lost/stolen/broke, affordable to replace. My old boss (I'm a stay at home dad now) had Dewalt cordless and Milwaukee electric. Great tools and loved them. But a few times I brought my own Ryobi impact driver and it ran with the big dogs on the job sites. Ryobi has my loyalty, definitely prosumer, and is perfect for my at home projects.
What a great video. I appreciate the history and information you provided . I learned a lot from this.
Used to have bunch of ryobi tools but switched to milwaukee.
Ryobi was fine for the price and DIY projects, but my biggest issue with them was quality and battery.
LED light on impact died on week one, poor quality of measurements on tools, etc but dang battery would overheat and 1 of extra capacity battery died on me only after a year.
This was early time when ryobi started to introduce brushes less so maybe things are a lot better now based on what other people say, but even milwaukee m12 produce as much power (if not more) as ryobi 18 line ups
m18s are just beast.
Definitely a very insightful and informative videos. Thumbs up man. I take it at its simplest level, the difference between the DIY - PRO ranges relates to build quality/materials and total operational hours you can get out of the tools?
Ryobi used to be junk but their newer line of green colored battery powered tools are downright fantastic for the price. They've really struck a great balance of quality and affordability. They're not the cheapest, but they also don't break the bank and feel great to use. So far I've got a drill, two nail guns, a miter saw, and a jigsaw, and I think I'm not turning back any time soon.
Here in norway dewalt and ryobi had max 20% price difference. Here Dewalt is the best tools compared quality/price. Ryobi is getting pretty expensive with the new hp+. My drill sett of 2 powerstack/805/850 + charger cost way less than the equivalent ryobi sett
What is the power tool for cars wheels nuts?
My favourite is their one handed reciprocating saw. It's so nice and small and I can cut 2x4s no problem.
@@Carlos.Riverausually an impact driver.
@@fenix144 sure, either
LOL what you REALLY need to know is.... Batteries are uh spen sive.... battery ADAPTERS... are cheap AND plentiful. Ex. i have a Makita XSH03 subcompact circ saw, i only own its orig. battery and almost always has a dewalt on it, same for some of my HART lights or whatever.... SFMF
That was an excellent breakdown of the available brands, I have alot of deealtcordless, milwaukee corded, and Bosch corded tools One the best tools I have is the first 12,inch sliding miter saw from makita that told is over 25 years old still works beautifully, instead of two skinny slide rails it had very large single ball bearing tube onto instead the bottom like the newer ones, it is very heavy, I would put up against the newer ones anytime
For impact drivers and SDS drills, hilti/Milwaukee. For skill saws and other woodworking tools, DeWalt. For kangos, Bosch. For grinders, Milwaukee and DeWalt. That's just what I've found and based on the tools I've used. Hilti definitely have to be the best tools I've ever used, their impact drivers, drills and SDS drills are very well made and last a long time, I find their batteries to last that bit longer than other brands. DeWalt are solid too and I'd choose DeWalt as the best bang for your buck. You get very good tools at good prices.
When I ran auto installation shops I bought Makita and Bosch power tools because I used them every day. Now that I'm retired, the Ryobi line is inexpensive and good enough for the kinds of projects I occasionally do. I think their brushless HP tools and batteries should be in the Prosumer category, definitely an improvement over the standard DIY line.
I'm super-happy with my collection of Ryobi 18v tools. I have enough experience with other brands to state that Ryobi is most definitely Prosumer and not merely DIY. The batteries are great and most of their tools punch above their price. 🙂 Oddly enough, the very first Ryobi product that I purchased was their most expensive, their battery powered riding mower! ($3000 at the time about 3.5 years ago) I was so impressed with the quality of that mower that I started looking into the 18v tools. I took maximum advantage of their $99 for two batteries and free tool a few years ago to collect quite a few. 🙂
Ryobi might have used to be a diy tool but for sure nowadays they aren't especially when considering their brushless series being even better quality. While I do love me some milwaukee tools and they are usually better, my ryobi tools have been working alongside milwaukee tools for years and are closing that gap.
I use my ryobi 18 3/8 impact everyday at work . The battery life with the 4.0 amp battery is better then I was getting with the Milwaukee m12 .
@@jamesp9998 milwaukee m18 is the best
I've used Ryobi for three years (handyman service use). Just put them back in their respective bags to give away. That's about what they're worth, in my estimation. For example, compare a Ryobi 1/4" impact vs Porter-Cable, a similar price point tool. The chuck alone makes Ryobi a non-starter; I hated its stupid design. The drill/driver is similarly VERY lame: won't hold onto anything, especially in reverse. The circular saw is so weak it barely cuts 2x soft pine, that is if the battery that comes with the tool lasts the duration of the cut. The oscillating tool is a (very bad) joke vs, for example, a Porter-Cable (or any other brand, I imagine) given that it doesn't cut anything well and, again, has a stupid, clumsy chuck design. I could go on. The only Ryobi tool I've used that was any good is the reciprocating saw, except that the stupid designers put a spring-loaded trigger release on it. If you've ever pruned a tree with a reciprocating saw you may agree with me (unless you happen to have three arms/hands or six fingers). Should change the brand name to Cheep-N-Shoddy, or Cheep-N-Stupid; more fitting of quality, functionality and ergonomics, or lack thereof. Just OMO.
Ryobi is junk from my experience. Wouldn't even give them away just throw them in the trash.
This video is very informative. I like the history info with the brands, these brands are very old. They are truly the leading brands out on the market today.
DIYer here. I used to buy cheap tools, many years ago. I bought my first Makita drill for work when my 24v £50 drill gave up trying to drill into a concrete railway platform edge, working in Wembley, UK. I came back the next night with a freshly bought 18v Makita drill driver. Drilled and fixed 25 plates (100 holes) in about 40 minutes.
I have a mixture of Makita, Dewalt and Milwaukee tools now and will never buy cheap again. Dewalt is probably my preferred brand right now but I tend to buy tools when there’s a great deal on and I’m not restricted by brand.
Great video!
I'd say ryobi is prosumer. Although for most tools I'd say brushless only for that though.
Coming from Europe, my electrical engineer dad always told me that Black & Decker is a quality brand. When I got my pressure washer last year from B&D and I couldn't connect the hoses easily, the whole system was pissing water everywhere, I knew the brand had changed.
Bro if you are buying a pressure washer from a power tool company you deserve the shitty product you get. Pressure washers are their own ecosystem with a few specialized companies that make the quality ones
Black and Decker USED TO BE a quality American brand that manufactured elsewhere to the same high standards. It is now just a cheap Asian product.
30 years ago was a great brand like craftsman and Mastercraft. Now it's all garbage including the top brands. In order to make tool light and cheapish, plastic for as many parts as possible. It's like zebco spincasters, the cheap ones with Disney cartoons will suck, but their top of the line, mostly metal construction reels are top of the class and last a long time.
Definitely didn't attach the hoses
@@johncoops6897yup and even worse, they used to be known for certain things that they did well, but now they’re just another brand slapped on generic everything.
Frist and most important question before making a decision: Do you want/need to be cordless? If yes, then check the range of tools. Example: If you have a garden, then go for a brand that offers gardening tools and not only drills and impact drivers. Go for a brand , that covers all field of work that YOU need. Go for one band and share the batteries between tools while saving on the ecosystem aka chargers (and batteries.)
In the end I went for Makita 18 volt, it covers all the bases for ME.
But if I would only care about gardens I would choose Stihl. If I would be a builder, I would go for something else. And so on...
I've had a B&D hammer drill for ten years or so now. Works like a charm. But then again, I only use it as a homeowner with various maintenance and DIY jobs. Biggest thing it's done is drill through brick walls and mount new window frames with massive mounting screws straight through said brick.
Works for me as a homeowner - but I probably wouldn't use it for anything work related.
Bought a Ryobi drill 5 years ago for $35 and it is still running strong for the 3-4 times a year that I use it. Probably the best drill I could have bought for my use case.
Well said. For an average homeowner doing a few repairs here and there, plus maybe some hobby usage, a cheap Ryobi drill will last decades.
In my experience it's the chuck that will wear out on a drill over time. I've thrown out two drills in my life and in both cases the chuck became stripped and no longer held the drill bit securely.
That is my experience with Ryobi tools in general. They're clearly not the best but they're an enormous step up from Black+Decker or WalMart crap and for "average" homeowner/hobbyist usage they will last decades.
For me as a DIY person who likes to buy quality without breaking the bank, it's mostly DeWalt because for the tools in interested in (Drills, Drivers, Shop Vacs, Circular Saws) they are excellent. However for other tools I have crossed brands. I went with the Milwaukee M12 Fuel oscillating tool because it's just better and has less vibration, and if I shopped sanders, it would be Bosch or DeWalt. I almost went Makita for how smooth their circular saws are but the ergonomics couldn't match DeWalt. Each company has tools that they really excel in so if you want the best tool within your budget for various jobs, you may find yourself with 2-3 different brands.
when i worked in construction we had three brands: stihl for the big jobs, ryobi for the jobs that would wear out a drill in a month, and milwaukee for the shelf princess tools that worked when needed but were seldom used
@tool review zone
Clint, that was a very well thought out and produced video; well done my friend, well done👍🏻
Know ppl gonna argue and stand by “their fav”, and nothing wrong with being brand loyal, but as hard as this vid might have been to categorize everything, gonna say; nailed it in my opinion all the way. Home run bro. Cheers✌🏻
I disagree on one brand. Ryobi’s new one plus HP line especially the 1/2” impact and 3/8” extended ratchet are prosumer grade bordering pro. The p262 blows away the snap on mid torque 1/2” impact. The thing can’t even take off semi lugs but the p262 can. Was hoping I would see the 1 year later review on the p262 I’m really waiting for the new cordless 18v carpet extractor cleaner and I’m hoping they put out a compact 3/8” impact as well to compete with dewalt as well as their orange and big red brother. If I could afford to have makita impact I would but for the price ryobi has done really good with the last year of new products. I used to think they were just a cheap tool brand but now for any serious diy auto work they’re the go to. And I could even see myself starting a little Mobile mechanic service with ryobi tools.
Interested in trying Hercules but I’ve committed to the ryobi battery. Guess I’ll have to buy an adapter lol.
I use Ryobi. I have been using the same old blue ryobi tools for years. I have tried to kill them, so I could buy new ones... I haven't been able to.
Edit: my drill I just now starting to go. It still works. It just whines. I have used it to drill holes in concrete many times. I don't mean the hammer drill. I mean the regular comes in a set drill.
In my opinion, the Festool OF 2000 E router was the best and I've been told by a rep for Festool that this particular router was made by another company and since I repaired them, I noticed that it shared the same collet as Dewalt routers at that time.
The OF 2000 E had two bearings in the business area and a small bearing up top, and their switches were perfect and never needed replacement.
Now the OF 2200 E router is made by Festool but it just isn't as versatile and trouble free.
Sometimes companies improve things until they're merely acceptable.
Before even watching the video, I currently use Makita for work (predominantly low voltage/ access control work). And I use a mix of Ryobi/rigid for my more home use tools (miter/table saw) and my oringal entry level Makita drill/impact combo stays at home now.
The thing you can't knock about ryobi is that make everything.
I personally have a mix is milwaukee and ryobi. Just behinds on the tool
When I first started construction I opted for DeWalt simply so I could share batteries with my workmates. Having invested so much in them over years it's hard to make a switch to a better albeit more expensive brand.
I'm in the exact same boat. Started with nothing, borrowing everything. Everyone used Dewalt. Bought all my own tools now I feel like I can't switch which I mean, Dewalt makes decent tools so it doesn't matter all that much. Though I do think now there could of been a better option.
@@TheOfficialDjProduct What are the "better options" that you think one should invest in if they are going from scratch?
I have a few Makita corded-tools, but am looking at Dewalts battery-lineups. I notice most of them are 18V (which most likely will be more than enough, Not sure about the circular saw though. I'm looking at the DCD791 and DCF887 package that I probably would start with
I've got DeWalt and Bauer, both cordless and corded. DeWalt for heavily used items, Bauer for project or rarely used items. I'm a tool girl and happy with my choices.
I own some of everything and there’s no difference. Mostly on the Ryobi system and have no complaints except their miter saw is less capable than other brands, but is totally fine for DIY.
I have my Dad's cordless Black&Decker drill. It's nearly 40 years old (!) and I still use it, today. It fits beautifully in the hand, too, while so many modern tools are clunky and awkward. Black&Decker used to be it, but they have fallen a long way 😢
And you can still get batteries for it?
Yeah, Black&Decker are basically toy manufacturers at this point. It's a shame!
In the old Sears days Craftsman was a good purchase because they basically had a lifetime guarantee. I read about someone that used one of their sanders to strip paint from shingles on a house, and just kept getting a replacement from Sears every time they died.
Lowes sells Craftsman and backs their guarantee. I'm not at all impressed with most of their tools. I do but their 25' tapes and return them to Lowes when they break in less than a year.
I know nothing about tools and yet somehow I still enjoy watching these videos
EXCELLENT INFORMATION!
THANK YOU FOR SHARING!!!
I just bought my first set of power tools today and decided to go with Milwaukee. Seems to be the company with the least amount of complaints online and with my buddies in construction who are familiar with most brands said they're a good buy as well. Won't be using them religiously, but I'd rather buy quality and have the tools for many years than have some cheap chinese tool that breaks in months.
Years ago, I had some B&D drill and some other cheap tools just for simple repairs around the house.. until I saw my friend's entire Dewalt tools set in his truck...I was like wow...But I can't justify the cost for what I do...Fast forward, got my very first set of Milwaukee fuel impact driver & hammer drill about 5 years ago and now I have both M18 and M12 system mainly for our personal vehicles and our delivery van. As small business owner, I deserved pro grade tools 😁
As a small business owner to another… you cannot afford down time with fzcked tools. I run both M18 and Dewalt 20V. M12 for around the house.
Great Video! Love the history of each brand. "Real Nas Like". Looking to get into battery tool system. Leaning towards Kobalt since we have a Lowes close by and with warranty I can just take to Lowes store if have any issues. I have some SKIl 40v lawnmower, trimmer, & blower. They work great so far but did have issue with trimmer and it took 3 months to get warranty replacement. So that makes me want tools that if have an issue I can take back to store and get replacement not have to deal with calling a customer services and take weeks or months to get replacement. I was always a craftsman brand fan but seems like there power tools are not what they use to be. Enjoy your videos. Keep up great work!
I tend to do my research and buy the best I can so have Metabo 36v hammer drill , Makita drill for core holes and 18v , dewalt nail gun and drill , Milwaukee 12v drill , assorted hand tools and I am looking at a Mafell track saw and ukj pocket hole jig . I wait for the job and buy the best tool then for that job. I steer clear of diy brands as I don’t like buying twice .
I heard (not sure how true, but maybe worth looking into) that makita invented the lithium pack technologies but didn’t patten it, and Milwaukee did 😂
As a former makita gnome, I’ll vouch for this. Pretty sure I saw their lithium stuff in the shelves way before anyone else.
My grandad was one of if not the best motorbike mechanics were I live and the best bit of tool advise he ever gave me was that he was never rich enough the buy cheap tools
Makita and Dewalt has always been my go to. Makita for small tools such as sanders, drills, imapact, nailers, multitool. But for dewalt i prefer the heavy tools like table saw miter saw and shop vacs.
The newer Ryobi tools really are transcending the diy zone. They are a pretty amazing balance of price and quality. The sheer diversity of their tools is getting crazy. I bet they will have a battery powered jobsite microwave oven before long... for the pricing and versatility they are really killing it. Very good for someone beginning a trade, etc... without breaking the bank one can quickly amass a huge collection of very good tools
Makita has a battery powered coffee maker
@@buddahkz9980makita also has nice TC guns for structural steel
ryobi is cool, but still just for homeowners. they arent up to par with the pro level tools
Makita has a microwave about a $1000 for it.
Terrific information Flint
I’ve had the same set of Ryobi tools for about 20 years now… They helped build a small house and they have never failed me. I stick with Ryobi.
My dad is in the ecosystem of Dewalt and passed down some of his tools to me and I’m fairly in it’s battery system too , but I’ve been eying Milwaukee for the longest now.