▼EXPAND FOR LINKS TO THE TOOLS▼ 🎥 Watch Next - Hater's Guide to Harbor Freight - ruclips.net/video/_WzDCxfJXAY/видео.html 🛠 Tools In This Video: Ryobi 8-Tool Combo Kit - homedepot.sjv.io/a1qKRj Ryobi Router - homedepot.sjv.io/Jr1LE2 Ryobi Variable Speed Router - homedepot.sjv.io/oeAXEo Ryobi Brushless Tools - homedepot.sjv.io/0JbxLO DeWALT Jobsite Table Saw - amzn.to/3QrlO6r DeWALT Miter Saw - amzn.to/3QkPulL Metabo Miter Saw - amzn.to/3ZhWlR1 Skil Miter Saw - amzn.to/3QmbHQe Milwaukee M12 Kit - homedepot.sjv.io/rnZg4G Milwaukee M18 Router - homedepot.sjv.io/EaMNNP Ridgid Router - homedepot.sjv.io/RyzOvX Other Tools/Equipment I'm Asked About Often: Where I get my t-shirts (mostly) www.kerusso.com Toolbox in Background - homedepot.sjv.io/x9B2xy Tool Wall over Miter Station - amzn.to/3ZgWq7B Digital RUclips Sign - amzn.to/3GL2a2e Some of my Favorite Under $30 Tools DFM Square: amzn.to/3Jfb5H2 Thin Rip Jig: amzn.to/3LKm2lB DFM Saw Height Gauge: amzn.to/3jidia1 Small F-Clamps: lddy.no/157u9 (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe the 731 Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store use code 5NEWTOOLS to save 20% off your order. Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
Ryobi did split in 2018 and Kyocera got Ryobi limited in Japan and handles power tool markets in , Asia , Latin America , Middle east and Africa . TTI handles Ryobi brand in North America , Europe , Australia and New Zealand ... totally different tool lines .Blue Ryobi tools are Kyocera .
I have over 20 Ryobi tools. I use them for everything basement , tiles, cabnets, countertops, wood working for over 10 years. They work as good as Dewalt, milwaukee . I used them before
highly recommend getting the HP Oscillating Multi-tool over the regular. The regular requires a hex nut to change blades and drives me crazy, whereas the HP has the lever for switching blades. HP is also 30% more powerful, which you'll need for metal (the regular can get by on max power but leaves more to be desired).
Their commitment to battery compatability over time is key. It's easier justifying a tool purchase when you know that access to a battery is a non-issue.
@@FTsingos I havent exactly had a ryobi tool fail on me but I did over work and overheat one of their cheap brushed 5.5" circ saws. And smoked it. I dont blame the tool for failing under abuse. Ive got a ryobi brushless 7.25 with likely a spotty trigger switch. Doesnt reliably start when trigger is pulled. Havent gotten to fixing it yet.
@@fixerupperer I do NOT understand tool snobbery. I get it. You can buy cheap stuff and it's cheap for a reason, breaking, etc. But hearing people rip on ryobi when I've had nothing but dependable service from them perplexes me.
This is exactly right. I still have an old set of blue tools from them that I still use. There was a time when you could buy a new "set" for not much more than new batteries, so I have newer duplicates of tools that I use more often, but I don't think any of my tools are non-functional even after all of these years. It is fair to say that some of the other brands may be higher quality and beefier, but for my home shop I'm invested in the Ryobi ecosystem. I will agree with the assessment on the table saw and miter saw. Although it was cheap and it works, the table saw is pretty sloppy. The miter saw is better and works for me, but if I were to do it again, I would probably spend a little more money and get something better.
I use Ryobi tools almost exclusively. They have come a very long way in the last 10 years. All my Ryobi tools work great and have never let me down. They are coming out with so many great products for their 18 volt line. I am not ashamed to be a Ryobi user.
Ryobi has a special place in my heart. My entire life, my Dad used Ryobi for household fixes. So I grew up watching him use them. They were a reasonable price and got the job done. When he passed away in 2014, my mom gave me a lot of his Ryobi tools since I am a woodworker. I love those tools. I love even more that I can buy new batteries and use them in my Dad’s tools. ♥️
I'm still using a DeWalt Radial Arm Saw, made in Towson, Maryland, that my dad bought brand new in 1971. Finally had to have the motor rewound. But after all these years, the saw is still square and has no play.
Make sure to give them some grease every once in a while to keep em running. My dad is a dewalt guy but used ryrobi for houshold things as well. I got my own dewalt set of tools but ryobi is special to us
I love the fact that Ryobi kept the same 18 volt battery when they went to lithium batteries. It breathed new life into my old blue tools I bought back in the early 2000’s. I still have every blue tool and they all work flawlessly. I’ve been adding the newer tools to my collection and my two favorites are the grease gun and the backpack sprayer. I run a lawn care business and have been using the backpack sprayer almost every day with zero issues.
@@Deno2100 No offense intended but that's a bit of a loaded question I think. If they are powerful enough to do the job you need them to do, they're as powerful as they need to be. What is powerful enough for me may not be for you ... One thing I have noticed however that directly addresses your question, my leaf blower is twice as powerful when I use the 6amp battery than the 2 amp battery. This could be by design but I always thought that more amps meant more time between charges. Hope that helps.
I’m very much a Ryobi fan. Love the wide array of tools available. I’m an avid DIYer and woodworker. I don’t work on a job site or stress the tools daily. For light to moderate duty use I think these work just fine and have a great price point.
I totally agree. I'm an HVAC contractor, and I use Milwaukee and Dewalt tools in the field for daily abuse, but I use Ryobi for my own home projects or occasional repairs. Don't get me wrong. They're capable tools for the field as well!
I keep hearing "if your a home owner or DIY'er". I have used Ryobi for over 25 years in commercially work and still use them today. I still own blue Ryobi tools that work like new...once I updated to lithium batteries powering them, it was like renewing them. have had great results while costing less than others. The battery compatibility is also a huge plus. I have dropped them several stories and they survived, never broken one yet. Love them. Really like the channel.
Only ryobi I've ever seen actually fail was a lower end drill. The clutch eventually stripped out, was 15 years or so old and was used to do everything from hanging planters to build entire decks. I will say ryobi doesn't necessarily make the most powerful tools and occasionally comes out swinging with a few garbage tools(like the purpose and function) like their battery fogger device or their lackluster palm sander... granted the other 99% of their products are solid as can be.
Yup. Its like cars. A budget car still functions as a car. Maybe it doesn't have all the bells and whistles but it can get the job done at a large cost savings.
Great review, have a very large Ryobi tool collection, probably 80% of what they offer from drills, saws, snow blower, inverter, and even a chainsaw. These tools are ideal for me and a lot of people because of the cost and the diy factor, which let's you keep the tool after the job is done, unlike when you hire a pro. Pros will always down these tools because of durability, warranty, quality, power, and reliability, which is probably only a 10-17% difference between Ryobi or tools like Milwaukee or DeWalt. The thing I did like about Ryobi is that Hart tools look exactly like Ryobi and will do nothing but devalue Ryobi and my collection.
I'm a professional cabinetmaker. I've used Ryobi tools since they were still blue and grey and ran on Ni-Cad batteries. The commonality of the battery design was the deciding factor for buying the new brushless models; the new batteries would fit my old tools which would become my "Home" set. I still have a few of the new, green tools that are not brushless, but the majority of my collection is. I have pretty much every tool type in this video and 10, 3 and 4 amp hour batteries along with five chargers. Pro Tip: Wait until the "Ryobi Days" sale, buy the 2 batteries and charger combo and get a free (brushed) tool. I've picked up a couple like that. The tools with brushed motors are being discontinued so don't have the best features. I use these tools every day, both to build cabinets and countertops, as well as install them. The brushless impact driver will drive 3" #8 screws hard enough to snap them on it's high setting. The 6" circular saw is a battery hog, but handy for quick cuts, the router _is_ top heavy, and the table saw has alignment problems at times. That said, I had a coworker over-stress a sander and kill a new battery. Ryobi replaced it with no questions asked, I just had to go to Home Depot and pick it up. Some of my coworkers have Rigid and Milwaukee tools, but don't have the variety I do, so my tools get a LOT of use. These are NOT DeWalt. But I think DeWalt are overpriced for what they are. What Ryobi has produced in the One+ line are good tools for the money they charge. They are not the best you can get, but they are worth every penny and then some.
I still have some of those “blue tools”!!!! A jig saw, light and reciprocating saw. I don’t use those particular ones often. Yet every time I slap in the battery, they fire up and get the job done. I finally had to discard the last old battery that I bought probably 20+ years ago as it no longer would hold a charge. I’ve done everything from minor repairs to tearing a 1920’s kitchen down to the studs and joints and rebuilding it with my Ryobi. We did have to buy a corded circular saw to cut through the hardwood and subfloor, but everything else was done with battery Ryobi. And as a woman, I like that they are not overly heavy and fit in my hands.
The brushed tools are not being discontinued. Just like Ridgid and Milwaukee, Ryobi also has base tools they use to bring new customers in with attractive prices and basic features for the home owner. Most of their old brushed tools were revamped like a year ago: The drill, impact driver, impact wrench, circ saw, sander, jigsaw, you name it
Good video. When people ask me which is best, I say “pick a color and stick with it.” I chose black and yellow, I don’t want 3 different chargers taking up room in my shop. For most, the green, yellow, blue or red brand will do everything they need it to do.
Have you found the newer random orbit sanders to be battery hogs as well? Asking for some friends. I like their lil compact router, and their yard equipment is actually really decent not considering the pricepoint.
I live totally off grid in the wilderness. I have 22 Ryobi Lithium tools. They have been reliable and cost effective for me. I had a 7 1/4 inch Ryobi brushless circular saw that was used daily to cut firewood for my wood stove. I cut thousands of pieces of ironwood and mesquite with it. I also used it for wood working. It lasted 3 years before it died, so I without question bought a second one.
The biggest thing I love about Ryobi is that they were the first one to adopt the battery platform idea and really run with it. Since the beginning of battery-operated tools my biggest complaint was that they changed the battery every time the new tool came out almost forcing you to buy it and throw your old tool away.
It's so dumb to orphan a cordless tool line. Once the customer has committed to a manufacturer, he's more or less locked into the manufacturer. It's not like coded tools, where brand loyalty isn't enforced. At the price of batteries, once a customer buys a tool (the reason for sales, BTW) he's pretty much locked into that line by the battery. Orphaning the battery design not only gives the customer an opportunity to jump ship but almost pushes him out the door, perhaps never to return. I've switched brand at least twice when the old batteries were obsoleted. Makita was the first. Their batteries were absolute junk (had them rebuild several times) and when they changed to NMH, I went with DeWalt. When DeWalt switched to LiIon and a new form factor (for no reason), I went to Bosch. I just threw away my last DeWalt tool as my final battery died. Yes, I know there is a converter but that's a kludgy afterthought. I'm not going back to either Makita or DeWalt for anything. There are too many, better, alternatives. Ryobi, in its own way, is one.
@@kwilliams2239 Makita batteries was the exact reason why I finally bit the bullet on the Ryobi cordless world. My Makita drill/driver itself was great, but neither battery was particularly good, even when new. The first one died completely a while back, and when the second one recently hit its last legs I discovered those batteries aren't even available any more. Sure you can get ones that *look* the same on Amazon/Ebay, but batteries are something I'll only trust if I know they're genuine - and the original ones were crappy anyway, so it was time to change. I took the motor out of the Makita and added a power supply and controls to make an electric table lift mechanism for my DIY drill press though, so it's not all bad :)
My first power tools were Ryobi and Ive been planning on upgrading to more premium brands over time. However Ive been having a hard time since my Ryobi tools just wont die, they have never done me wrong. I will agree you should stay away from the larger saws and whatnot, but their drill/drivers and other small tools are great for the price minded diy/homeowner.
I agree..sort of. I got my ryobi tools before the brushless versions and intend on replacing each tool as they break or fail with the newer brushless, however, they haven't died yet.
Same story. 18 years ago I was a new homeowner on a budget. Bought a starter set of Ryobi tools. They have all been heavily used and are all still in operation.
Yup. My dad left me a couple of the old blue Ryobi tools ... and they still work. They are bulkier, but they just won't die. The only problem I've had with any Ryobi tool was a 10 year old 18v blower I used ALL the time. The switch failed, but I definitely got my value out of it, and didn't cry about buying another one - for $79.00 !!! I'm not going to knock a brand that has been so good to me for 10+ years.
The big saws works great you just need a bigger battery. I use 9ah batteries for my Ryobi tools that need the extra power. Ryobi brushless are the bomb.
I bought the brushless Ryobi tool set for home renovation projects 4 years ago & they were all great. I've never ran across issues & they've all held up well over the years, doing 4-7 projects/year. I recently bought their hedge trimmer & absolutely love it! I have no idea how these tools will hold up if you were to use them everyday but it's the best bang for your buck for casual hobbiest DIYers + homeowners!
I've been a custom home builder for almost 25 years now and the majority of my tools are Ryobi. Using the right tool for the job as well as the larger capacity batteries is what truly makes a difference. I have some makita hammer drills and drivers that i abuse the crap out of for more industrial work. My Ryobi tools have lasted me many years in residential construction and still perform very well. I even have lots of that older blue line, still running strong today with the help of the newer battery technology. I do feel the cheap combo kits are for beginners and are priced really affordable for them, but the separate perchased tools and HP brushless line are game changers. I've also over the years wasted tonnes of money and have bags of broken Dewalt and Milwaukee tools in my garage, that suffered burn outs, multiple motor and battery failers, non brushless and brushless. I like Dewalts larger tools chop saws, table saws etc, but avoid their cordless hand tools like the plague.
Same here. I'm a contractor both residential and commercial. I switched to Ryobi years ago and love them. Durable and cheap. Like you I have bags of Milwaukee, DeWalt, Bosch, Makita etc; I'm sold on Ryobi. I always hit Home Depot each year around the holidays and buy the 2 batteries, charger, bag, and get a free tool too. I own about everyone they make now.
@ronlovell5374 would you be willing to sell those broken tools? Struggling to make ends meet and am trying to do furniture repair on the side so upgrades to old tools i have would be great
Yup, I have a similar story especially about the blue tools. I have a blue tool box set that I bought from Home Depot in 2002 and I still use it for my main moneymaker. Got a lot of the newer Ryobi stuff too but I like the box set because everything is together, and I just wheel it around the job site with the new batteries. The new batteries make the blue tools better than ever. They’re kind of like they are on steroids. Long as you have a good blades, drillbits and accessories you can’t go wrong. Started using Ryobi in the late 90s.
I've just recently burned out a ryobi oscillating tool and a 5 1/2 circular saw, but too be fair, it was with a lot of hardwood cutting on a huge house. If I smack the oscillator it will jump start. LOL! The saw is toast but I'm thinking of purchasing the 7 1/4 brushless as it's half price currently.
I am a big fan of Ryobi. My collection of tools spans almost the full breadth of the 18v line (both brushed and brushless) and a good chunk of the 40v line. The versatility of the 18v battery across so many tool options is a godsend for the hobbyist and home owner because I can make a big mess during a project using several 18v tools, then turn around and use the same 18v platform to clean up my mess as well as finish and polish my project. Then I can turn around and use that same 18v battery platform to make and clean up another mess in my yard from trimming my trees to pruning my hedges and string trimming my grass before switching to the 40v platform to cut and bag my grass and blow everything into a nice pile. And if I were feeling particularly productive, I could switch back to the 18v platform and wash, polish, and vacuum out my car after covering it in grass clippings from the string trimmer. All that being said, I do think that you have a point about full scale construction site durability. Do I think the batteries or equipment would fail if used for their intended purposes on a job site, no. But I, too, used to do construction, and I have witnessed the thoughtless abuse of tools by workers because the tools weren't their own. So, I believe that under those circumstances I would opt for more robustly constructed tools simply because people are going to be people, and often they have a more callused approach to things that are not their own or that they don't have a vested interest in. I appreciate the honest assessment you gave of the tools you purchased. Great video.
@@shadowbanned5164 true, it can be addicting. But there comes a point where you own so many that there's really nothing new to buy. Lol. That's me. Sure there are some 18v and 40v items of theirs that I don't own, but I absolutely have no justifiable use for those items, so I can now resist the urge to purchase them. Ha!!
I have had some Ryobi tools for many years. Started with the Blue ones and now am into the new styles. I was working on the roof of a van and knocked my drill off. It went about 7ft down and bounced a couple of times. Still works perfect years later.
Used them professionally for a few years. I stepped up to Dewalt 20v XR and the difference is huge. That being said, I use Ryobi for all my diy stuff and couldn't recommend it more highly for that purpose. Ryobi is 100% the best for at home. The versatility is crazy. They make a pool cleaner for Gods sake haha.
Ryobi is getting WAY too expensive! I bought a DeWalt pole saw that is far better than the POS Ryobi pole saw that I returned AND IT WAS THE SAME PRICE! WTH???
I started my woodworking several years ago with Ryobi. I picked them up at a swap meet from a guy that bought return pallets, and he would test them and sell the ones that worked. I only had a couple that failed in the first year, and the rest I am still using. I have added and upgraded with new ones from Home Depot over the last couple years when they sold more brushless tools. I have been very happy with them. The $$ I save on tools allows me to buy wood other than pine.
I have a Ryobi reciprocating saw that I bought about 25 years ago and I've abused it, cutting everything from truck exhausts to nails and everything else since, and it's still going strong. If I can't kill it, it's a good tool.
At my highschool we use Ryobi exclusively in tech theater for building sets, I’ve seen a drill or impact drop 50 feet from the catwalk while we were changing lights. It still works. The main problem with the older ones is that the rubber grips peel a bit but they get used with people who have no idea how to use tools all the time and hold up well.
That is the good reason to have an economic tool. I worked in a university wood shop where they had every high end tool. The 2 table saws where 20k each. Every semester we have new students do a safety class. Five minutes after they are set loose to do their personal project a 1/3 of the class are miss using the tools. When I was a student I bought all my own tools and never let anyone use them.
I'm a maintenance technician at a local University and every one of my 13 power tools is Ryobi and I have yet to have one fail on me. To be fair I have only been in maintenance for about three years and I just recently decided to buy most of these tools, within the last 6 months. I am absolutely loving all of my tools so far and I hope they do last. I will update if anything changes
Swapping out all my DIY-tools for ryobi when it’s possible or something breaks. They have a really nice feel and the number or products with the same battery makes it for me. Started with garden tools but now also more and more for my hand\build tools. Think they are great value and yes go for the HP brushless. 👍🏻
I’ve been doing HVAC for 10 years and 90% of my tools are Ryobi 18V. Never had an issue with lack of power. From their portable band saw for cutting 1 1/4” black iron pipe on a boiler, to the impact torque wrench for changing out anode rods. My go to brand for tools
Once you have a few batteries, the logistics of Ryobi tools makes so much sense. My wife and I have 11 tools, 4 batteries and two chargers. We can get projects done in our home. My blue corded Ryobi drill is still working, too. Ryobi rocks on. :-)
As a home DIY person with only the basic home set up my Ryobi power tools and gardening gear has been very good and served me well. Having everything use the same batteries is a big bonus.
I have had Ryobi tools for years now. It started with an old blue drill and driver set that my father gave me and I have stuck with the platform ever since. I love the compatibility and versatility of their tool line and have never had an issue with anything breaking or failing. I would highly recommend any of their tools.
Ryobi is great for the price. I own over 20 Ryobi product. I love the versatility of the battery platform. My wife bought me a combo set back in 2008 and they lasted over 10 years.
I'm a Ryobi fan boy(78 year old kid), they work great and I like the ergonomics. The only tool I wasn't to happy with was the 12" chain saw, leaks bar oil out all over the place(maybe the line is off, will take it apart and see). I even have the 40+ system for lawn care and quite impressed with the 20" lawn mower, works much better than I thought it would. Will keep buying Ryobi for my home shop.
I'm a DIYer so these tools suit me just fine. Price and availability are key points. I do small projects and minor fixes around the house so this is why I've been a Ryobi user. And those battery deals that they've had in the past are hard to pass up, hahaha.
The tools aren’t as bad. One friend has a set and he uses them for his DIY. I also owned a pressure washer that comes handy removing the snow with a bucket (I don’t need to get a long hose and risking forgetting not closing the water and leaving it the pipes) and ice with is less damaging than trying to scratch your windshield with an icebreaker.
I have gone mostly all in on Ryobi over the past 3-4 years and have been completely satisfied. The single greatest motivation is the battery compatibility. Ryobi has gone on the record to say their batteries will always have compatibility. I had bought a set of Craftsman cordless 20 years ago but they eventually not only left the C-3 system behind but disappeared as a store. I use not only the drill driver, impact driver, saws and sanders but also have the tire inflater, impact wrench, hedge trimmer and caulk gun. Yes. The caulk gun. It gives a smoother bead when filling long, narrow cracks in my blacktop driveway than I ever could using a manual caulk gun. I have a few if their portable lights as well that are as handy under the bathroom sink as they are under the hood of a car.
The Caulk gun works perfectly. My wife even uses the battery powered hot glue gun for her crafts. We have about 25 or 26 battery powered items. One we use daily is the vacuum that looks like a Dyson with the foot or so wide brush head.
I have two 20 year old Ryobi drill drivers that have been used and abused and just keep on working. The fact that the new batteries will work in these drills is awesome. I am adding to my cordless Ryobi collection and am 100% satisfied!!!
I'm considered a beginner woodworker but, I've used Ryobi tools due to the price and I've found them to be pretty durable for what I use them for. I do exclusively Barrel Stave Art and small projects. I will continue to use the Ryobi tools. Thanks for the video and I really enjoy your content.
Howdy Mr. 731... I am EXTATIC at this video!!!.... I literally put down my buffer and work in my shop came to a COMPLETE stop so I could watch this video. 😅 I feel personally responsible for this videos creation as I've been harping on you about Ryobi for over a year now. Am I a fan. Yeap. Absolutely. And keep in mind, I'm a Dewalt guy. Let's also keep in mind to those who don't know and "hate" Ryobi....Dewalt is made by Black and Decker. How many woodworkers out there wouldn't even think about having a Black and Decker in their shop? Well, if ya got a Dewalt, congratulations, you've got a Black and Decker. SURPRISE!!!! Back in the day, "Dewalt" was sold exclusively by Sears. Which also exclusively sold Black and Decker. This was Dewalts infancy, the "call to action" if ya will of Black and Decker stepping up to include "Contractor" grade tools. So, those who shy away from Ryobi...take that under consideration. Ryobi does have its caveats. As you mentioned, tablesaws and miter saws. Those are an outstanding NOOOOO!!!!! As well, Ryobi has recently got into the "Dremel" side of tools and bits. I can't personally speak about their line of carvers n such, but I can speak about their bits. AVOID THEM!!!! Spend a little extra and get the Dremel line of bits or Kutsall. Ryobi, for the most part, make excellent tools "DEPENDING" on your purpose of that tool. Drills and Impacts. Fantastic. I've had mine for over a decade. You're drilling a hole. Do you need a $200-$300 drill for that? Absolutely not. Circular saw. Mine is corded, I wouldn't go battery powered for that regardless of manufacturer. Mine holds a standard 7.25 blade and has a laser...albeit laser had to be adjusted, no biggie. Again, what am I using that saw for? I am rough cutting lumber. Do I need a $300-$400 saw for that? Absolutely not. Allow me to list my "Ryobi" tools if ya will. Ryobi: Drill and Impact-battery, Drill corded. Buffer. Miter saw STAND (extremely well made, holds my Dewalt miter saw). Router table, very well made and durable. Router, plunge, plunge ain't so great, but the router itself has LOTS of power and variable speed. Battery powered trim router, agreed, a bit awkward but I got it on an Xmas sale for $50 bucks. Works great. Wet Saw Tile cutter. Less than $100 bucks, upgraded my entire bathroom with it including curved cuts around the toilet. Corded belt sander, fantastic. Angle grinder, WOW!!! Mosquito sprayer, TOTALLY kick ass!!! Leaf blower, HOLY CRAP!!!! What leaves? Grass trimmer and brush cutter. Kick ass. AND, they all Fir onto the same gas powered motor, just swap them out. Starts on first few pulls, have had it for several years, no maintenance and starts right up. Tree trimmer chain saw. I've got 12 Oaks in my front yard alone over 70' tall. Slap that saw on a pole and go to town. Battery powered fan and shop light....Got both PLUS a battery and charger for less than $100 bucks. ALL of those tools....NEVER had to return and ALL still work flawlessly. I've had Makitas, Boshe, Milwaukee tools, each of them failed. Dewalt and Ryobi are the only tools in my shop and I can build ANYTHING someone else can with more expensive tools and have equal or BETTER results for wayyyyy less money. I will BASH Ryobi on one thing though.....Their batteries.....There is ZERO indication that it's about to die on ya. One minute you're using it and everything is fine....Ya put it down, pick it back up and BAMMM. Dead battery. You yall read all of that....Virtual Fist Bump to ya.
Great review! Impartial and not biased. I have Ryobi products and purchased them just for reasons you mentioned. I don't use them daily but have put them through the paces over time. I do take care of all my tools and imagine that is why my drill driver and impact driver have lasted 13 years and still kicking. You hit the nail on the head when you spoke of the batteries and cost. That is what attracted me to Ryobi initially.
As a DIYer, I’ve been using Ryobi for about ten years. I love the battery compatibility. The only issue I’ve had with my Ryobi tools have been with their 18v nailers. I’ve had two, and both broke. I personally love their drills/drivers 1) because they have a light and 2) they have the magnetic base to hold bits.
I've never used an electric nailer that didn't have issues. They just don't have enough power to reliably clear each nail and they jam up all the time. After enough jams, things go seriously wrong. For cordless nailing, gas fired (which I guess have electric ignition, so they are technically battery powered as well) seem to be the only type that are reliable over time. And, if you don't use it all the time, the gas cylinders are a lot cheaper than even the smallest air compressor.
I have bosch for work but recently started using ryobi garden tools and they're fantastic especially for the price. Mower, chainsaw, brush cutter and hedge trimmer work great. Their features and ergonomics are really well considered. I'm aware that I need to be more careful with them compared to my bosch tools but I'm still very pleased.
I'm same, Bosch blue 18v cordless for my trade tools, and ryobi 1+ for my garden - mower, line trimmer & edger (expand-it) and a hedge trimmer. I have found the said garden tools to be brilliant.
I feel like Ryobi has stepped up a lot in recent years. Went from like a Black & Decker type brand to something pretty legit. My chop saw and circular saw are Ryobi.
Love my ryobi. They allowed my to start and build mu toolkit rapidly. A few years ago when I bought a medium sized chainsaw and a polesaw, greenworks' had much better reviews than ryobis so I went with greenworks for cordless, electric chainsaws.
Good description. Definitely not the top of the class tools, but very descent products for light duty us. I just build a wall closing off a loft. Used my Ryobi circle saw, impact driver (brushless), drill, and I'll be using the brad nail gun for putting the trim back on. All the tools work well and are fine for small projects. If I were building a whole house, then get the Milwaukie. Ryobi is great value for solid quality products.
I have been using a set from Ryobi for at least 15 years. Exactly as you stated, they are a good choice for the home DIYer, but would not be first choice for contractor service. That said, I have been satisfied with them.
First time home buyer, here. Your described use case for these is exactly why I went with Ryobi. They're great for the occasional DIYer. I have their 40v brushless string trimmer, one of their impact wrenches, and one of their palm sanders. I've been really happy with all of them. Their battery compatability throughout their massive product catalog definitely played a role in why I chose them. Great video!
Being almost entirely A Dewalt shop, I was hesitant to buy into a new battery platform. But then I found the Dewalt Battery to Ryobi tool adapter, which allows me to buy Ryobi tools, but still use my Dewalt batteries. I especially love the Ryobi glue gun…it’s terrific! As always, thanks for your videos!
Dewalt has terrible cordless drill i has some but big shit i fight all my Dewalt tools to trash because have too heavy use,no balance in hand use, broken alltime very expensive, not good, i buy all my factory handtools ryobi 3 year before and fight all Dewalt,makita,boch to trash, lot better working now. and not has come broken any tools after i change all tools to ryobi. Dewalt,rigid,bosch,festools has alltime broken or shit battery need many battery one little work, ryobi can workig one battery all day 8-12 hour no need change battery.
@@mattivirta wow - i borrowed 2 drill dewalt XR drill motors from a buddy - and then were both much more balanced than my ryobi drill motors and esp. my ryobi impact .. which is noisy and one speed.
Thank you , great content ,I was a Bosch person until I started with ryobi, now I have 9 tools and I’m waiting for my birthday to get a brushless drill to replace current one. I agree with the weighty situation with the router as well . Keep up the good work
I purchased my first Ryobi cordless drill 25 years ago. I was a cheap DIY and couldn't spend 2.5X for another brand. The tools were blue at the time. When I decided to finish my basement, I purchased the cordless combo kit and a cordless reciprocating saw. These were inexpensive and used the same 18V batteries that I already had. They were blue as well. Since then, I've purchased the new line of brushless tools including their cordless circular saw and new drills. All of the Ryobi tools that I've purchased are still working. All of them...even the ones I purchased 25+ years ago. I own a bunch of Festool tools as well and know what works best for me. The Ryobi line is great for a lot of folks. Tools snobs and those married to another platform won't love them, but to each their own. The only Ryobi tool I've been disappointed in is the jigsaw. I replaced it with a Festool jigsaw last week. :-)
The Ryobi drill is amazing. I treated mine so badly - completely overloaded it mixing tons of concrete, dropped it off decks, accidentally left it in the rain for days, spilled paint all over it etc. It lasted 5 years and I was amazed. Bought a replacement immediately and was so cheap. For the price you just can't go wrong.
I love mine as well; I have a drill driver and impact driver that I got in a combo kit (along with a nonreciprocating saw, circular saw, and multi tool) about a decade ago; the drill driver is still going strong, despite constant use and abuse (not quite what you put yours through, but still!). My wife suggested I might want to get a new driver this past black Friday and, while I thought about it, when I saw that the newer model lacks the mag tray, I decided mine worked just fine, even if it was a little rough looking around the edges. In fact, everything in that bag is still going strong, and I used all five of the tools within the last week.
My problem: female with tiny hands that has problem removing battery; brain fart- just put BLASTER on the inside connection and inserting removing the battery is slick & easy. Thank you for your informative 731 Woodworks Videos. I am basically self taught from books and ‘RUclips’ videos.🦋
As a DiY homeowner, it's Ryobi for me. Battery compatibility is key for me. I've several of them and one of their pod chargers. Had them for years and convenient knowing I can just grab a battery and a tool and do the job. Not one battery for this tool, another for that one plus whatever chargers. Great review.
I love my Ryobi tools, have been in the platform since they were all blue. Have never had one actually fail on me and I have remodeled more than half my house and built a 12x12 shed using them. I probably have more than 30 of the tools now and will continue to buy them as needed. Just bought the stick vacuum and speaker last weekend, wife loves the vacuum and the speaker lasted almost 12 hours with the 4ah battery and sounds pretty good.
I use my Ryobi half inch impact wrench almost every day putting boat trailers together. Also have a mini weed whacker, transfer pump, portable vacuum, reciprocating saw, flashlight, even a mini 5 inch fan in my bed room. I've had the half inch impact wrench for 2 years when I paid $99 for it with a 4AH battery and charger and that's the start of me getting into Ryobi. Love them.
As a beginner woodworker, I've been researching different brands to slowly replace my old cordless Porter Cable power tools(tools still work great, but the batteries are wearing down after 15 years). I started looking at Ryobi and was impressed with the variety of tools available and they almost fit my budget. Looking at the larger tools, I agree that the table saw quality isn't the best, so I would probably go with a more premium brand. However, I bought the Ryobi 18v miter saw and it seems like a much better quality tool, plus it was a great value for the price this past Christmas. I've only had it a few weeks, so I'll have to see how it performs long-term.
Hey Matt, this seems like an extremely fair assessment of Ryobi, from what I can tell. I appreciate that you dug deep for the history and even took polls about the tools before hand… You did your homework and we appreciate that thoroughness! I have a few Ryobi tools. I’ve been happy with the cordless brad nailer and caulking gun, not too crazy about the router or the drill bits & router bits... my Ryobi plunge router always plunged unevenly, and actually got worse as I had it.
I switched to Ryobi years ago and I'm super happy with them as a home DIYer. I have the table saw and sliding mitre and actually use them quite a bit, no issues.
I personally love Ryobi tools. I have never had an issue with them. The only thing I would probably skip out on is the drill bit and countersink drill bit sets. They are not the steadiest, and I have broken a few before. I love how lightweight they are, as well as how they fit in my hands. Gotta love the interchangeable battery system, too!
@NATIONAL Security and Automation very true...I love Harbor Freight. I get some of my essentials from there instead of getting them from the big box stores.
I find the impact driver and drill a little uncomfortable, same with Milwaukee's little drill and impact. I like the way dewalt feels after a few hours but value-wise Ryobi has them beat.
I started as a handyman 3 years ago and I picked Ryobi because of the amount of tools and the battery. Out of the 3 years I've been doing my handyman service, I only had one tool die on me. That was the oscillating tool. I do have that table saw and that miter saw, I think it does all right. For what I needed to do which is cut wood relatively straight it does a job.
Great review. We live on a 3 acre country property in Western Australia and have loads of Ryobi and they all work well. We have two 8” chainsaws, one on an extender pole, sprayer, lawn mower with mulcher, hammer drill, Secateurs and an angle grinder. No issues with any of them. Small chainsaws cut much thicker than recommended and since a lawnmower catcher is useless on a property the mulcher insert works a treat. So they do get more of a workout than your average home diyer but have not had any fail.
I live in Anderson and drive by the Ryobi facility a few times a week on I-85. I never really knew why they built such large offices until this video. That's really cool to know that their innovation center is there. They've also been building some additional buildings 1-2 exits down.
I think the main takeaway from all of these tool brand review videos is to "do what's right for you." Nice Matt. FYI I had a Bosch corded router that burnt up just like that. I exchanged it for the exact make and model and haven’t had any other issues. It seems that no matter what brand you choose, sometimes you just get a dud!
As a new woodworker, Ryobi was the most approachable brand and most affordable. Personally so far they fit in my hands better than some of the more expensive brands
Yeah, I think you nailed it. I was a professional cabinet maker / contractor, and I used pro tools. I am not a pro now, and I use tools maybe 10 hours a month, rather than 10 hours per day. Ryobi are just fine for me. Actually likely better for someone who has the "feel" for when a tool is being abused. A lot of beginners are going to over stress the little brushed motors. The brushless are quite a bit better.
Having already been bought into another power tool line, I decided to expand into Ryobi also for their oddball tools that either have no equivalent with the line I have, or are seldom needed but quite useful on those occasions. At Ryobi's price point, I can justify the purchase.
I have a lot of Ryobi tools and never has a single one broken. They're the best I've ever own and will keep buying them. I have a reciprocating saw, blower, edger, weed trimmer, push mower, drill, hedge trimmer, and circular saw. Love em all
I have a few of Ryobi tools and I LOVE them. The only thing I would advise (and that is probably valid for other brands) - is to stay away from sets and kits. Their tools might look the same as the ones you can buy separately, but they actually are not. Separately available ones are usually more powerful and/or offer more features. Plus, you buy what you actually need, and not what the company tells you what you need.
The Ryobi days tool sets, buy a battery kit and get a tool, are usually lower quality tools compared to the single tools for sale. You can find good ones, I got a P262 impact wrench and a battery kit for a good price. I ended up buying a lower price impact driver - it worked for the job, which is important, but I am going to return it for a better model cause the P262 spoiled me, and I guess the better model will have better future proofing. Do some research about product models before purchasing!
I doubt that! The tools are the same in the kits or not it's just that they have varying tool models just as the big boy brands have various models of a drill.
I started with a Ryobi string trimmer because it was $20 used with battery and charger. Now I've got their driver and a drill and feel they work really well for the price. I'm not doing heavy construction with them, but they handled building a laundry room very well. What sold me was the battery compatibility.
I got a Ryobi string trimmer in 2009 for like $60. The old NiCad batteries didn't last more than 10 minutes and my home had a LOT of edging and trim that needed cut. I also picked up the cheap leaf blower which was under-powered for the 3 trees that needed the leaves blown each year. I gave up on it and went back to my beloved gas powered tools. Now 16 years later, I've moved into a new home with a larger property. It's super easy to take care of the 1/2 acre here and way less trimming. I've pulled out the old trimmer and blower and upgraded to a 9 amp hour Lithium battery. I can now trim and blow my entire yard when I use the riding mower to cut the grass. They are 1/4 the weight of my gas powered equipment. And the battery lasts for 2 mowing/trimmings without charging.
I love most of Ryobi's smaller tools. I have been using them for years and have never has a bad experience. I have used Dewalt, and Milwaukee tools on jobsites and found that for the type of projects I do on a regular basis at home, Ryobi works. They have stood the test of time for me and have been through some abuse on my part. I agree that when you get to larger tools, chop saw, table saw, etc. you definitely get what you pay for. I am about to retire my Ryobi table saw and upgrade to a higher quality brand. It served its purpose but I would not trust the its accuracy for fine precision woodworking. Thank you for putting out these videos and helping all of us DIYers see where we can add value to our tool collection without breaking the bank.
My first table saw was a Ryobi, 10 + plus years ago. Then I tried the Dewalt!!! BIG difference. The Dewalt fence is much more accurate and the micro-adjustments knob is a game changer.
That's how my shop is too... the cordless tools are mostly Ryobi but the heavier bread and butter machines like my contractor saw and planer are DeWalt. With Ryobi, I can catch sales regularly enough that knock off another 30%+. With a little planning, I can generally save a ton, especially on their batteries.
I started using Ryobi tools when they were blue. I choose them due to price and at one point wanted to try another brand but again price won. In my opinion, Ryobi is now competing with professional brands and can handle bigger jobs. I've had two contractors test my P238 impact driver and was impressed. One used it to drill several lag bolts through 6x6 cedar posts for a gazabo and another drilled self-tapping screw through 2x4's into a 14 gauge square tube for a sliding gate, they both continued using the impact! Majority of my tools are Ryobi and I will admit not all of Ryobi's line is ready for heavy lifting, so I do have other brands in my shop.
i've used the Ridgid lifetime warranty a few times and they always take care of me.. they even send me just parts to make repairs myself instead of forcing me to take the tool to an authorized repair facility and have them do the repair.. internal parts that require disassembly too.. that was impressive..
I am a full time wood worker. I decided to upgrade to “better” drill and driver and purchased Porter Cable. I’m back to using my Ryobi drills. The battery life is longer and provides better power.
@@ewetoobblowzdogg8410 there is an argument to be made harbor freight has some better drills and drivers than porter cable & most of the gutted stanley B&D lines
@@moldyzucchinis3251 Gotta agree with you on that one, especially these days. HF has stepped up their game alot, but has always carried some decent stuff for any market. Their floor jacks are top notch
@@moldyzucchinis3251 Gotta get the 3 ton low profile, not the 2. I lifted an incinerator that was the size of a large safe like it was made of feathers
Great video Matt. Couple of things. Go brushless if you can. The gearboxes are not built for continuous use, so, when you run a battery from 100 to 0, leave the tool cool down especially the grinder & the sawzall. The 18 gauge nailer is one of the best thing they make. Hedge clippers, brush cutter & chemical sprayer are great too. Good platform for the price & the range is fantastic.
I liked alot of the stuff they make, but you managed to circle in the worst two tools they have; recip saw and angle grinder are... well... really not good. My old Ryobi grinder could heat the house after light use. 🤣 I liked the drill, impact driver, OMT and even the small inflator.
I have a roofing and siding company and i started using ryobi tools for fun over 20 years ago, and not a single one has ever failed! So i just keep using them :)
I think another point is that Ryobi often make multiple versions and models of the same type of product. The impact driver is a perfect example, there are at least (that I've counted) 3 or 4 models you can buy that all have different features. The driver I have does have 3 speed modes on it but costs obviously a little more than the base model. So for those that want those features they exist, and for those that don't need them you can save a few bucks.
Great video Matt, the tti facility is about 10 minutes from my house in anderson sc. it’s a spectacular facility, and they have a factory outlet where you can go buy discounted tools
Bought a small kit and added to it. Love the 18 gage nailer. Ryobi days are like Christmas for 4 amp batteries. Love your channel. Keep up the good work.
Thanks, Matt. This has rapidly become my fav channel. You are super insightful and people can tell you are a been there done that kinda guy based on the way you review tools. As far as ryobi, i bought my set based on everything you said at the beginning, but primarily because of battery swapability. For bigger jobs and longevity, obviously go for the plug in highend stuff. For us weekenders, ryobi has my money. I've built a garden, deck, cutting boards, workbench, and numerous other projects around the house with just ryobi. Keep up the great work. I'm interested to see if you ever get into lathe work. I'll stay tuned.
I have a ton of Ryobi tools both 18 and 40 V. I agree with you that some of them are really worth having. I like the versatility that Ryobi offers. I would love to see you build something using the Ryobi tools you have.
I’ve had a Ryobi chop(miter) saw since 2009 and I have built kids playhouses and cut railroad ties for garden beds secret door bookshelves and more… I love it.
Ryobi really seem to have stepped up their tool game over the last few years. The quality you get for the price makes them pretty damn appealing these days.
I sold all my craftsman and switched to Ryobi. I love their tools for general crafting like the clamp on magnifier/ light. Makes my life so much easier. Picked up a vacuum and the HP 10” sliding miter too. The 10” sliding miter came with a 4 amp battery and the saw stand for $270. Kinda hard to beat and does everything I need as a non professional. I’ll always love my dewalt stuff but I think Ryobi will take a considerable amount more of my money in the future.
Craftsman is vile. They are merely riding on their 20th century glory. They are equal with Black and Decker in quality although B&D is a far better ecosystem.
We started with the Ryobi 1 system a very long-time ago and love them with heavy use! Only had one break- mider saw (operator error) and it was fixed and no cost! Just got the brushless jigsaw and love it! Im over all the tool snobs! Peace ✌️ and great video
As a ryobi guy myself i can say some tools have their downsides but starting off especially just for a hobby they can do everything you need them to at an affordable price
I don’t have much experience with Ryobi, but I do think they have their place in the tool world. I really think you should try out Flex tools. They really hit the ground running since their release of their 24 volt line in 2021. They have also extended their lifetime founders warranty through 2023. I bought into the line and love them. Definitely worth a try. Only downside of the line is the amount of tools they have at the moment, but that is because it is so new. They are releasing many more tools this year.
Have around 25 tools from Ryobi. One tool have totaly broke down on me, a sander thats 10 years old. Some of my tools are not that great, but all of them is useful and do what they should. What most people hating on Ryobi is not getting where Ryobi is placed in the market. If you are a professional carpenter or something like that (I am not btw), you probobaly should go with something else. Ryobi is located in the market for home owners and similar use, and is priced like that. Many of those hating on Ryobi is comparing the brand and the tools with much more expensive brands and thinking its the same. I love my Ryobi tools even though they are not perfect. The variety, price and performance is awesome and I do not regret getting into this ecosystem one bit.
Love the different options that Ryobi offers, it was the major selling point, along with the battery platform not likely to change. My newest favorite Ryobi tool is the air-inflator which works great as a duster for my PC. No more cans of compressed air, this thing does great. I have lights, USB-charger, saw, drill, etc with Ryobi. Makes it hard to move to another brand with so many useful tools. Hot glue gun, tire pump, dremel, soldering iron, I mean does Dewalt do all that? I don't think so. My old Dewalt drill? Yeah they don't make the batteries anymore. I had to buy an knockoff battery, and I gave it to my Mom to keep at her place. Haters gonna hate, but to me it's just ignorance.
Not only does Dewalt not make the batteries anymore but their own battery adaptor is unnecessarily clunky (like it looks like an aftermarket creation rather than an official one in the way it plugs into the old tools) and above all else, expensive: it costs almost as much as their smallest Li-ion batteries, which is really kind of insane when you think of what it actually is - some plastic, some pins and wires and a control board. Indeed the clunky adaptor with its weird offset angle thing causes it to limit the range of cutting depths on my old circular saw when it has one of the bigger batteries (5Ah) attached. I really wish I had bought into Ryobi rather Dewalt about a decade ago when we still in the late Ni-Cad era.
I am a beginner woodworker and I have a Ryobi table saw and so far it is working well for me. If I pursue this any further then I most likely upgrade, but for mow I am very happy and satisfied with this table saw. If you ever make a comparison I would love to see that.
Funny. I tell buddies Ryobi is perfectly fine, but just steer clear of their table saws. I had one for awhile and it always felt under powered and dialing in the fence was annoying. I ended up replacing it with the DeWalt 10in jobsite saw, and good lord that was a huge upgrade. That being said, Ive also owned Ryobi miter saws and never had a problem with them. They're great.
@@CPtheCoug Agree. Hated that table saw. Replaced it with the Skil(not the best but a great upgrade). No matter what I did, it couldn't stay "inline". Miter saw is really good, drills are good... stay clear of the biscuit cutter(oye so bad). Save some more $$ and find a Directtools outlet. Great set of tools for a home worker.
He has a video on the Skil as a great entry level or budget table saw. WHEN the motor on yours fails, or when the fence inevitably won't lock correctly, Skil might be your next step (yeah, that's my story too lol)
I bought a set of 18v ryobi tools when we bought our house 12 years ago, and more over time. They’ve held up very well with light and medium duty use. A couple years ago the batteries started failing, so I’ve replaced them, but to get 10-12 years out of the batteries and have none of the units fail in that time is quite good in my opinion.
You hit the nail on the head here. If you're a professional, or someone using these tools heavily every day, its best to avoid Ryobi. But for 90% of homeowners and hobbyists who use the tools occasionally, Ryobi is great.
Agreed. I’m a DIY homeowner (pretty handy) using Ryobi tools for years and haven’t had any problems with any of them. I will say though, I’m an Electrical Engineer working in construction and visit a lot of job sites and see contractors using Ryobi tools all the time. Most say that they work great and cheap enough that if they break due to employee neglect, they don’t feel bad about buying another.
I use the brushless Ryobi tools professionally and I haven't had any issues the past couple of years. I burned out a recip saw that wasn't brushless. It still works, but I got it to smoke so I don't use it anymore. The only thing I haven't figured out yet is if the batteries are lasting as long as other brands. Never have a second tool doing the same job to compare it.
@hulkhuggett The brushless Ryobi are pretty decent, but I wouldn't want to be using them all day, everyday. More for comfort. I have Ryobi and Milwaukee m12 and m18. I really love the m12 stuff for comfort and size, but whenever I want the extra power, the m18 stuff is just more comfortable and feels better than Ryobi.
@@mikebonom My first thought was the same that Milwaukee felt better in my hand. After using the brushless Ryobi for a while and then grabbing my Milwaukee I didn't really notice it anymore. I haven't used the M12. I keep my Milwaukee at home and take Ryobi to work.
I've been invested in Ryobi since my first years as a homeowner in the blue tool days. I stayed with them for compatibility and because the value was there for my limited needs. I now have 20+ tools and have really enjoyed the non-traditional ones. The nail guns and the outdoor line have been especially helpful and somewhat unique at the time I picked them up. I still have the blue drill and impact driver. As I look to replace them with something more compact, it's obvious that Ryobi is also held back by their larger battery footprint. I want to stay with them, as I have 12+ batteries, all 4+ Ahr, but I'm also drawn to the more compact offerings, especially those 12 volt ones. I would love to see Ryobi offer a limited 12V lineup that does not cannibalize their One+ 18V tool commitment.
Great video! All of my battery tools are Ryobi. My plug-in tools (110v) are a mix of Milwaukee, DeWalt, Makita, Ryobi and Rigid. I agree completely on the DeWalt saws. I had both a Ryobi miter saw and table saw and it took a lot more time to build something square and straight compared to my DeWalt miter saw and table saw because I kept having to remeasure. The DeWalt saws are just on point every time. I've only had 1 newer (green) Ryobi tool give up the ghost on me and it was the multitool - replaced it with a Rigid plug in and have had no issues. My drills and drivers from Ryobi have been great the only issues I've run into is with batteries failing prematurely. I had a couple of older blue Ryobi tools that went up in smoke but they lasted for many years. Thanks for the content.
The poll results really surprise me. I bought the ryobi 18 gauge brad nailer and started making wooden American flags in late August last year (never done any woodworking before then) and as soon I I posted them on Facebook the orders started flying in. From basically the first of September to Christmas I made 31 flags and used it pretty much every day with absolutely no problems. And even with all that use I only had to charge the battery once. I got the ryobi radio with Bluetooth for Christmas and it works great also. Now I’m thinking about a project for my scrap. I’m thinking about doing end grain coaster sets. My next ryobi purchase I’m planning on is the angle grinder. I want to give wavy flags a try. So needless to say I guess I’m one of the few that has nothing but good things to say about ryobi.
I relish the Ryobi hate while I build great stuff for way less. I've had a couple of their tools I thought "damn... this could've been better", but more often than not they're great. I bought the high pressure inflator for like $26 with a Christmas gift card. Instantly one of my favorite tools.
I bought one of those a month or two ago, it has saved me a few times now here in the winter. So much better than lugging out the compressor. love that it clamps on to the tire stem and has a long enough hose that you dont have to stay hunched over while filling your tire. Best 15 bucks I ever spent (I think it was on sale from 20)
@@chaddrumhiller8301 100% agree. I don't have a compressor at all so for me it's the difference between going to a gas station with (hopefully) free air or walking to my garage.
yeah I love my inflator too, but I did manage to break it charging up a fire extinguisher; a water and air pressure type; I pumped it up to over 100lbs and the inflater hose separated from the compressor. I was able to fix it by taking the cover off and use a hose clamp to re attach the hose backnti the compressor.
Im an average Joe DIYer and I love Ryobi tools. I never understood any hate on them unless people are just set in their ways on super high-end pro brands. One of the best things imo is the battery platform. Even if you're buying a new product you dont have to worry about getting new batteries because the same ones you have at home will fit. Also, they have SO many sales and bundles that you end up acquiring extra batteries at basically no cost to you. Never have to worry about whether you have enough power to take on a project and its peace of mind knowing im not gonna have to lose my momentum on something just to sit around and wait on a battery to charge. Also they are very affordable. Ive never done any pro level construction so I can't speak to how they perform in a professional environment but from what I have read they do well. But I digress. My option is you can't choose a better brand as a DIYer.
If you're a Contractor who makes money with his power-tools, you buy Makita, Milwaukee, or the higher end DeWALT models. If you're a typical homeowner who needs power-tools to get occasional projects done, or to help maintain your house; you buy Ryobi. That's it in a nutshell.
Im a Ryobi junkie, used to walk by them too until i tried the lithium line years back. The 40v chainsaw, mower, weedeater, pole saw are fantastic! So far, havent tried an 18v tool we haven't loved! Way better than the old 96' models!
I actually had much experience with ryobi. It started out with the starter kit like you bought and I have added many more since. I am in the final stages of finishing my house and I am proud to say that the entire thing was built with nothing but ryobi tools. The only time I have had them fail on me was when I was constantly cutting pressure treated 2x12 and when I was using the drill to stir some concrete. Other than that no problems whatsoever
I've been using Ryobi 1+ system for years. Started out with the blue, and have since added the green in almost everything I could dream of needing. I am a weekend wood worker (woods wood works) and plan to retire to the wood shop with my Ryobi, they have only let me down once with the Sawzall. But I bought another one just like it😃
You convinced me, after watching this video I purchased the Ryobi circular saw and nailer, plus two batteries and charger. I will only use them for very occasional dyi projects, so I don’t need the most expensive tools.
![Ryobi is Awesome and Bad [wrong!]](/img/1.gif)
▼EXPAND FOR LINKS TO THE TOOLS▼
🎥 Watch Next - Hater's Guide to Harbor Freight - ruclips.net/video/_WzDCxfJXAY/видео.html
🛠 Tools In This Video:
Ryobi 8-Tool Combo Kit - homedepot.sjv.io/a1qKRj
Ryobi Router - homedepot.sjv.io/Jr1LE2
Ryobi Variable Speed Router - homedepot.sjv.io/oeAXEo
Ryobi Brushless Tools - homedepot.sjv.io/0JbxLO
DeWALT Jobsite Table Saw - amzn.to/3QrlO6r
DeWALT Miter Saw - amzn.to/3QkPulL
Metabo Miter Saw - amzn.to/3ZhWlR1
Skil Miter Saw - amzn.to/3QmbHQe
Milwaukee M12 Kit - homedepot.sjv.io/rnZg4G
Milwaukee M18 Router - homedepot.sjv.io/EaMNNP
Ridgid Router - homedepot.sjv.io/RyzOvX
Other Tools/Equipment I'm Asked About Often:
Where I get my t-shirts (mostly) www.kerusso.com
Toolbox in Background - homedepot.sjv.io/x9B2xy
Tool Wall over Miter Station - amzn.to/3ZgWq7B
Digital RUclips Sign - amzn.to/3GL2a2e
Some of my Favorite Under $30 Tools
DFM Square: amzn.to/3Jfb5H2
Thin Rip Jig: amzn.to/3LKm2lB
DFM Saw Height Gauge: amzn.to/3jidia1
Small F-Clamps: lddy.no/157u9
(If you use one of these Amazon and other affiliate links, I may receive a commission)
Some other useful links:
Daily Tool Deals on my website: www.731woodworks.com/tool-deals
Subscribe the 731 Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
Check out our easy-to-follow woodworking plans: www.731woodworks.com/store use code 5NEWTOOLS to save 20% off your order.
Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
Love the shirt 💪
Ryobi did split in 2018 and Kyocera got Ryobi limited in Japan and handles power tool markets in , Asia , Latin America , Middle east and Africa .
TTI handles Ryobi brand in North America , Europe , Australia and New Zealand ... totally different tool lines .Blue Ryobi tools are Kyocera .
I have over 20 Ryobi tools. I use them for everything basement , tiles, cabnets, countertops, wood working for over 10 years. They work as good as Dewalt, milwaukee . I used them before
highly recommend getting the HP Oscillating Multi-tool over the regular. The regular requires a hex nut to change blades and drives me crazy, whereas the HP has the lever for switching blades. HP is also 30% more powerful, which you'll need for metal (the regular can get by on max power but leaves more to be desired).
@pete_lind did you know that TTI
Make Milwaukee tools. The same thing as Ryobi
Their commitment to battery compatability over time is key. It's easier justifying a tool purchase when you know that access to a battery is a non-issue.
it's the reason i stuck with them. Also, I have NEVER had one break on me after years of house fixes, projects, and weekend warrior work on my car.
@@FTsingos I havent exactly had a ryobi tool fail on me but I did over work and overheat one of their cheap brushed 5.5" circ saws. And smoked it. I dont blame the tool for failing under abuse. Ive got a ryobi brushless 7.25 with likely a spotty trigger switch. Doesnt reliably start when trigger is pulled. Havent gotten to fixing it yet.
@@fixerupperer I do NOT understand tool snobbery. I get it. You can buy cheap stuff and it's cheap for a reason, breaking, etc. But hearing people rip on ryobi when I've had nothing but dependable service from them perplexes me.
This is exactly right. I still have an old set of blue tools from them that I still use. There was a time when you could buy a new "set" for not much more than new batteries, so I have newer duplicates of tools that I use more often, but I don't think any of my tools are non-functional even after all of these years.
It is fair to say that some of the other brands may be higher quality and beefier, but for my home shop I'm invested in the Ryobi ecosystem. I will agree with the assessment on the table saw and miter saw. Although it was cheap and it works, the table saw is pretty sloppy. The miter saw is better and works for me, but if I were to do it again, I would probably spend a little more money and get something better.
What you gotta do is avoid 2009-2017 lmao
I buy Ryobi tools. No one steals my tools. Checkmate.
😂😂😂😂😂😂
but local pawnshop won't buy them!
@@lelandsmith2320 less reason to steal lol
@@lelandsmith2320 That's why!
Same no one is stealing my tools
I use Ryobi tools almost exclusively. They have come a very long way in the last 10 years. All my Ryobi tools work great and have never let me down. They are coming out with so many great products for their 18 volt line. I am not ashamed to be a Ryobi user.
I have a 1991 120v ryobi table saw thats an absolute tank
Ryobi has a special place in my heart. My entire life, my Dad used Ryobi for household fixes. So I grew up watching him use them. They were a reasonable price and got the job done. When he passed away in 2014, my mom gave me a lot of his Ryobi tools since I am a woodworker. I love those tools. I love even more that I can buy new batteries and use them in my Dad’s tools. ♥️
I'm still using a DeWalt Radial Arm Saw, made in Towson, Maryland, that my dad bought brand new in 1971. Finally had to have the motor rewound. But after all these years, the saw is still square and has no play.
Big ups to your old man and may he rest in peace. Those tools will be cherished.
Make sure to give them some grease every once in a while to keep em running. My dad is a dewalt guy but used ryrobi for houshold things as well. I got my own dewalt set of tools but ryobi is special to us
How dare you make me teary-eyed at 9 in the morning...
Sorry for your great loss, you have a treasure using your dad's tools.
I love the fact that Ryobi kept the same 18 volt battery when they went to lithium batteries. It breathed new life into my old blue tools I bought back in the early 2000’s. I still have every blue tool and they all work flawlessly. I’ve been adding the newer tools to my collection and my two favorites are the grease gun and the backpack sprayer. I run a lawn care business and have been using the backpack sprayer almost every day with zero issues.
Do you know if the Ryobi weed wackers and air blowers are as powerful as they need to be?
@@Deno2100 No offense intended but that's a bit of a loaded question I think. If they are powerful enough to do the job you need them to do, they're as powerful as they need to be. What is powerful enough for me may not be for you ... One thing I have noticed however that directly addresses your question, my leaf blower is twice as powerful when I use the 6amp battery than the 2 amp battery. This could be by design but I always thought that more amps meant more time between charges. Hope that helps.
i quit them got sick of batteries dying
Amazing! 🤩
All my old blue Ryobi tools are also still working over 20 years later. They don't look pretty, but they still do the job
I’m very much a Ryobi fan. Love the wide array of tools available. I’m an avid DIYer and woodworker. I don’t work on a job site or stress the tools daily. For light to moderate duty use I think these work just fine and have a great price point.
I feel sorry for you looking at the ugly lime green. When you use it.
@@patbird9694you look at your work, not your tool.
And with Ryobi a lot more green $bills stay in your pocket!
One green helps the other!
I totally agree. I'm an HVAC contractor, and I use Milwaukee and Dewalt tools in the field for daily abuse, but I use Ryobi for my own home projects or occasional repairs. Don't get me wrong. They're capable tools for the field as well!
I keep hearing "if your a home owner or DIY'er". I have used Ryobi for over 25 years in commercially work and still use them today. I still own blue Ryobi tools that work like new...once I updated to lithium batteries powering them, it was like renewing them. have had great results while costing less than others. The battery compatibility is also a huge plus. I have dropped them several stories and they survived, never broken one yet. Love them. Really like the channel.
I have numerous old blue ryobi tools. Also several 10+ year old batteries still kicking
Nice review
Only ryobi I've ever seen actually fail was a lower end drill. The clutch eventually stripped out, was 15 years or so old and was used to do everything from hanging planters to build entire decks.
I will say ryobi doesn't necessarily make the most powerful tools and occasionally comes out swinging with a few garbage tools(like the purpose and function) like their battery fogger device or their lackluster palm sander... granted the other 99% of their products are solid as can be.
Great video man- I think people hate on Ryobi because everyone can afford it whereas the big brands are more of a status symbol
Yup. Its like cars. A budget car still functions as a car. Maybe it doesn't have all the bells and whistles but it can get the job done at a large cost savings.
huge part of it
I only ever used their drill driver and i hated that you cant tighten it by hand but you have to press the trigger, so you can never get it tight
@Gigachad-mc5qz huh? Have you ever used another drill? Mine works amazing
Definitely an element of this at play, yes.
Like car models sometimes being a 🍆 extension.
Ryobi the Nickleback of cordless tools. Everyone hates on them, but they aren't that bad.
😀
My shop is predominantly Ryobi. I am a hobbiest, but they have been great and I have had them for many years and handed the older ones down to my son.
Great review, have a very large Ryobi tool collection, probably 80% of what they offer from drills, saws, snow blower, inverter, and even a chainsaw. These tools are ideal for me and a lot of people because of the cost and the diy factor, which let's you keep the tool after the job is done, unlike when you hire a pro. Pros will always down these tools because of durability, warranty, quality, power, and reliability, which is probably only a 10-17% difference between Ryobi or tools like Milwaukee or DeWalt. The thing I did like about Ryobi is that Hart tools look exactly like Ryobi and will do nothing but devalue Ryobi and my collection.
I bet you have to take the battery out and pop it back in every 20 minutes. I know from experience and it's common across all of their tools.
never ha\d to do this.@@DudeEggs
@@DudeEggsI use corded tools from Ryobi. Love it so far
I'm a professional cabinetmaker. I've used Ryobi tools since they were still blue and grey and ran on Ni-Cad batteries. The commonality of the battery design was the deciding factor for buying the new brushless models; the new batteries would fit my old tools which would become my "Home" set. I still have a few of the new, green tools that are not brushless, but the majority of my collection is. I have pretty much every tool type in this video and 10, 3 and 4 amp hour batteries along with five chargers. Pro Tip: Wait until the "Ryobi Days" sale, buy the 2 batteries and charger combo and get a free (brushed) tool. I've picked up a couple like that. The tools with brushed motors are being discontinued so don't have the best features.
I use these tools every day, both to build cabinets and countertops, as well as install them. The brushless impact driver will drive 3" #8 screws hard enough to snap them on it's high setting. The 6" circular saw is a battery hog, but handy for quick cuts, the router _is_ top heavy, and the table saw has alignment problems at times. That said, I had a coworker over-stress a sander and kill a new battery. Ryobi replaced it with no questions asked, I just had to go to Home Depot and pick it up. Some of my coworkers have Rigid and Milwaukee tools, but don't have the variety I do, so my tools get a LOT of use. These are NOT DeWalt. But I think DeWalt are overpriced for what they are. What Ryobi has produced in the One+ line are good tools for the money they charge. They are not the best you can get, but they are worth every penny and then some.
I still have some of those “blue tools”!!!! A jig saw, light and reciprocating saw. I don’t use those particular ones often. Yet every time I slap in the battery, they fire up and get the job done.
I finally had to discard the last old battery that I bought probably 20+ years ago as it no longer would hold a charge. I’ve done everything from minor repairs to tearing a 1920’s kitchen down to the studs and joints and rebuilding it with my Ryobi. We did have to buy a corded circular saw to cut through the hardwood and subfloor, but everything else was done with battery Ryobi.
And as a woman, I like that they are not overly heavy and fit in my hands.
The brushed tools are not being discontinued. Just like Ridgid and Milwaukee, Ryobi also has base tools they use to bring new customers in with attractive prices and basic features for the home owner. Most of their old brushed tools were revamped like a year ago: The drill, impact driver, impact wrench, circ saw, sander, jigsaw, you name it
Good video. When people ask me which is best, I say “pick a color and stick with it.” I chose black and yellow, I don’t want 3 different chargers taking up room in my shop. For most, the green, yellow, blue or red brand will do everything they need it to do.
Have you found the newer random orbit sanders to be battery hogs as well? Asking for some friends. I like their lil compact router, and their yard equipment is actually really decent not considering the pricepoint.
The router is awful imo, but almost all of our tool are ryobi. We've done a lot with them
I live totally off grid in the wilderness. I have 22 Ryobi Lithium tools. They have been reliable and cost effective for me. I had a 7 1/4 inch Ryobi brushless circular saw that was used daily to cut firewood for my wood stove. I cut thousands of pieces of ironwood and mesquite with it. I also used it for wood working. It lasted 3 years before it died, so I without question bought a second one.
So it’s conveniently died right at the end of their warranty? Highly suspicious….
@@GokouZWAR not if you are cutting iron wood and misquite.
The biggest thing I love about Ryobi is that they were the first one to adopt the battery platform idea and really run with it. Since the beginning of battery-operated tools my biggest complaint was that they changed the battery every time the new tool came out almost forcing you to buy it and throw your old tool away.
Me too. The 18+ is a great platform and they have so many tools available for it!
I have several Ryobi tools that worked just fine
It's so dumb to orphan a cordless tool line. Once the customer has committed to a manufacturer, he's more or less locked into the manufacturer. It's not like coded tools, where brand loyalty isn't enforced. At the price of batteries, once a customer buys a tool (the reason for sales, BTW) he's pretty much locked into that line by the battery. Orphaning the battery design not only gives the customer an opportunity to jump ship but almost pushes him out the door, perhaps never to return.
I've switched brand at least twice when the old batteries were obsoleted. Makita was the first. Their batteries were absolute junk (had them rebuild several times) and when they changed to NMH, I went with DeWalt. When DeWalt switched to LiIon and a new form factor (for no reason), I went to Bosch. I just threw away my last DeWalt tool as my final battery died. Yes, I know there is a converter but that's a kludgy afterthought.
I'm not going back to either Makita or DeWalt for anything. There are too many, better, alternatives. Ryobi, in its own way, is one.
@@kwilliams2239 Makita batteries was the exact reason why I finally bit the bullet on the Ryobi cordless world. My Makita drill/driver itself was great, but neither battery was particularly good, even when new. The first one died completely a while back, and when the second one recently hit its last legs I discovered those batteries aren't even available any more. Sure you can get ones that *look* the same on Amazon/Ebay, but batteries are something I'll only trust if I know they're genuine - and the original ones were crappy anyway, so it was time to change.
I took the motor out of the Makita and added a power supply and controls to make an electric table lift mechanism for my DIY drill press though, so it's not all bad :)
@@rickmartin7674 Yup, say what they want about Ryobi but I have batteries from them that are 10 years old and still working.
My first power tools were Ryobi and Ive been planning on upgrading to more premium brands over time. However Ive been having a hard time since my Ryobi tools just wont die, they have never done me wrong. I will agree you should stay away from the larger saws and whatnot, but their drill/drivers and other small tools are great for the price minded diy/homeowner.
I agree..sort of. I got my ryobi tools before the brushless versions and intend on replacing each tool as they break or fail with the newer brushless, however, they haven't died yet.
Same story. 18 years ago I was a new homeowner on a budget. Bought a starter set of Ryobi tools. They have all been heavily used and are all still in operation.
Yes my exact same experience! As far as durability I am still running some Blue tools. I am so vested in Ryobi now that I just won't switch.
Yup. My dad left me a couple of the old blue Ryobi tools ... and they still work. They are bulkier, but they just won't die.
The only problem I've had with any Ryobi tool was a 10 year old 18v blower I used ALL the time. The switch failed, but I definitely got my value out of it, and didn't cry about buying another one - for $79.00 !!! I'm not going to knock a brand that has been so good to me for 10+ years.
The big saws works great you just need a bigger battery. I use 9ah batteries for my Ryobi tools that need the extra power. Ryobi brushless are the bomb.
I bought the brushless Ryobi tool set for home renovation projects 4 years ago & they were all great. I've never ran across issues & they've all held up well over the years, doing 4-7 projects/year. I recently bought their hedge trimmer & absolutely love it! I have no idea how these tools will hold up if you were to use them everyday but it's the best bang for your buck for casual hobbiest DIYers + homeowners!
I've been a custom home builder for almost 25 years now and the majority of my tools are Ryobi. Using the right tool for the job as well as the larger capacity batteries is what truly makes a difference. I have some makita hammer drills and drivers that i abuse the crap out of for more industrial work. My Ryobi tools have lasted me many years in residential construction and still perform very well. I even have lots of that older blue line, still running strong today with the help of the newer battery technology. I do feel the cheap combo kits are for beginners and are priced really affordable for them, but the separate perchased tools and HP brushless line are game changers. I've also over the years wasted tonnes of money and have bags of broken Dewalt and Milwaukee tools in my garage, that suffered burn outs, multiple motor and battery failers, non brushless and brushless. I like Dewalts larger tools chop saws, table saws etc, but avoid their cordless hand tools like the plague.
Same here. I'm a contractor both residential and commercial. I switched to Ryobi years ago and love them. Durable and cheap. Like you I have bags of Milwaukee, DeWalt, Bosch, Makita etc; I'm sold on Ryobi. I always hit Home Depot each year around the holidays and buy the 2 batteries, charger, bag, and get a free tool too. I own about everyone they make now.
@ronlovell5374 would you be willing to sell those broken tools? Struggling to make ends meet and am trying to do furniture repair on the side so upgrades to old tools i have would be great
Yup, I have a similar story especially about the blue tools. I have a blue tool box set that I bought from Home Depot in 2002 and I still use it for my main moneymaker. Got a lot of the newer Ryobi stuff too but I like the box set because everything is together, and I just wheel it around the job site with the new batteries. The new batteries make the blue tools better than ever. They’re kind of like they are on steroids. Long as you have a good blades, drillbits and accessories you can’t go wrong. Started using Ryobi in the late 90s.
Meat loaf
I've just recently burned out a ryobi oscillating tool and a 5 1/2 circular saw, but too be fair, it was with a lot of hardwood cutting on a huge house. If I smack the oscillator it will jump start. LOL! The saw is toast but I'm thinking of purchasing the 7 1/4 brushless as it's half price currently.
I am a big fan of Ryobi. My collection of tools spans almost the full breadth of the 18v line (both brushed and brushless) and a good chunk of the 40v line. The versatility of the 18v battery across so many tool options is a godsend for the hobbyist and home owner because I can make a big mess during a project using several 18v tools, then turn around and use the same 18v platform to clean up my mess as well as finish and polish my project. Then I can turn around and use that same 18v battery platform to make and clean up another mess in my yard from trimming my trees to pruning my hedges and string trimming my grass before switching to the 40v platform to cut and bag my grass and blow everything into a nice pile. And if I were feeling particularly productive, I could switch back to the 18v platform and wash, polish, and vacuum out my car after covering it in grass clippings from the string trimmer.
All that being said, I do think that you have a point about full scale construction site durability. Do I think the batteries or equipment would fail if used for their intended purposes on a job site, no. But I, too, used to do construction, and I have witnessed the thoughtless abuse of tools by workers because the tools weren't their own. So, I believe that under those circumstances I would opt for more robustly constructed tools simply because people are going to be people, and often they have a more callused approach to things that are not their own or that they don't have a vested interest in.
I appreciate the honest assessment you gave of the tools you purchased. Great video.
For me thats the biggest problem with Ryobi....NOT ADDING TO MY GROWING COLLECTION!
@@shadowbanned5164 true, it can be addicting. But there comes a point where you own so many that there's really nothing new to buy. Lol. That's me. Sure there are some 18v and 40v items of theirs that I don't own, but I absolutely have no justifiable use for those items, so I can now resist the urge to purchase them. Ha!!
@@Brad_R_LiveFit Bought that Ryobi drain auger the other week just in case my drain gets blocked lol Im screwed....(using a ryobi impact driver)
I have had some Ryobi tools for many years. Started with the Blue ones and now am into the new styles. I was working on the roof of a van and knocked my drill off. It went about 7ft down and bounced a couple of times. Still works perfect years later.
Used them professionally for a few years. I stepped up to Dewalt 20v XR and the difference is huge. That being said, I use Ryobi for all my diy stuff and couldn't recommend it more highly for that purpose. Ryobi is 100% the best for at home. The versatility is crazy. They make a pool cleaner for Gods sake haha.
Ryobi is getting WAY too expensive! I bought a DeWalt pole saw that is far better than the POS Ryobi pole saw that I returned AND IT WAS THE SAME PRICE! WTH???
@@joeking433 WOW
I started my woodworking several years ago with Ryobi. I picked them up at a swap meet from a guy that bought return pallets, and he would test them and sell the ones that worked. I only had a couple that failed in the first year, and the rest I am still using. I have added and upgraded with new ones from Home Depot over the last couple years when they sold more brushless tools. I have been very happy with them. The $$ I save on tools allows me to buy wood other than pine.
I have a Ryobi reciprocating saw that I bought about 25 years ago and I've abused it, cutting everything from truck exhausts to nails and everything else since, and it's still going strong. If I can't kill it, it's a good tool.
At my highschool we use Ryobi exclusively in tech theater for building sets, I’ve seen a drill or impact drop 50 feet from the catwalk while we were changing lights. It still works. The main problem with the older ones is that the rubber grips peel a bit but they get used with people who have no idea how to use tools all the time and hold up well.
That is the good reason to have an economic tool. I worked in a university wood shop where they had every high end tool. The 2 table saws where 20k each. Every semester we have new students do a safety class. Five minutes after they are set loose to do their personal project a 1/3 of the class are miss using the tools.
When I was a student I bought all my own tools and never let anyone use them.
I'm a maintenance technician at a local University and every one of my 13 power tools is Ryobi and I have yet to have one fail on me. To be fair I have only been in maintenance for about three years and I just recently decided to buy most of these tools, within the last 6 months. I am absolutely loving all of my tools so far and I hope they do last. I will update if anything changes
Swapping out all my DIY-tools for ryobi when it’s possible or something breaks. They have a really nice feel and the number or products with the same battery makes it for me. Started with garden tools but now also more and more for my hand\build tools. Think they are great value and yes go for the HP brushless. 👍🏻
I’ve been doing HVAC for 10 years and 90% of my tools are Ryobi 18V. Never had an issue with lack of power. From their portable band saw for cutting 1 1/4” black iron pipe on a boiler, to the impact torque wrench for changing out anode rods. My go to brand for tools
Once you have a few batteries, the logistics of Ryobi tools makes so much sense. My wife and I have 11 tools, 4 batteries and two chargers. We can get projects done in our home. My blue corded Ryobi drill is still working, too. Ryobi rocks on. :-)
As a home DIY person with only the basic home set up my Ryobi power tools and gardening gear has been very good and served me well. Having everything use the same batteries is a big bonus.
I have had Ryobi tools for years now. It started with an old blue drill and driver set that my father gave me and I have stuck with the platform ever since. I love the compatibility and versatility of their tool line and have never had an issue with anything breaking or failing. I would highly recommend any of their tools.
Ryobi is great for the price. I own over 20 Ryobi product. I love the versatility of the battery platform. My wife bought me a combo set back in 2008 and they lasted over 10 years.
Nice!
I'm a Ryobi fan boy(78 year old kid), they work great and I like the ergonomics. The only tool I wasn't to happy with was the 12" chain saw, leaks bar oil out all over the place(maybe the line is off, will take it apart and see). I even have the 40+ system for lawn care and quite impressed with the 20" lawn mower, works much better than I thought it would. Will keep buying Ryobi for my home shop.
I'm a DIYer so these tools suit me just fine. Price and availability are key points. I do small projects and minor fixes around the house so this is why I've been a Ryobi user. And those battery deals that they've had in the past are hard to pass up, hahaha.
The tools aren’t as bad. One friend has a set and he uses them for his DIY. I also owned a pressure washer that comes handy removing the snow with a bucket (I don’t need to get a long hose and risking forgetting not closing the water and leaving it the pipes) and ice with is less damaging than trying to scratch your windshield with an icebreaker.
I have gone mostly all in on Ryobi over the past 3-4 years and have been completely satisfied. The single greatest motivation is the battery compatibility. Ryobi has gone on the record to say their batteries will always have compatibility. I had bought a set of Craftsman cordless 20 years ago but they eventually not only left the C-3 system behind but disappeared as a store. I use not only the drill driver, impact driver, saws and sanders but also have the tire inflater, impact wrench, hedge trimmer and caulk gun. Yes. The caulk gun. It gives a smoother bead when filling long, narrow cracks in my blacktop driveway than I ever could using a manual caulk gun. I have a few if their portable lights as well that are as handy under the bathroom sink as they are under the hood of a car.
Happy to see this cuz I was curious about the caulk gun
The Caulk gun works perfectly. My wife even uses the battery powered hot glue gun for her crafts. We have about 25 or 26 battery powered items. One we use daily is the vacuum that looks like a Dyson with the foot or so wide brush head.
I have two 20 year old Ryobi drill drivers that have been used and abused and just keep on working. The fact that the new batteries will work in these drills is awesome. I am adding to my cordless Ryobi collection and am 100% satisfied!!!
I'm considered a beginner woodworker but, I've used Ryobi tools due to the price and I've found them to be pretty durable for what I use them for. I do exclusively Barrel Stave Art and small projects. I will continue to use the Ryobi tools. Thanks for the video and I really enjoy your content.
Howdy Mr. 731...
I am EXTATIC at this video!!!....
I literally put down my buffer and work in my shop came to a COMPLETE stop so I could watch this video. 😅
I feel personally responsible for this videos creation as I've been harping on you about Ryobi for over a year now.
Am I a fan. Yeap. Absolutely. And keep in mind, I'm a Dewalt guy. Let's also keep in mind to those who don't know and "hate" Ryobi....Dewalt is made by Black and Decker. How many woodworkers out there wouldn't even think about having a Black and Decker in their shop? Well, if ya got a Dewalt, congratulations, you've got a Black and Decker. SURPRISE!!!! Back in the day, "Dewalt" was sold exclusively by Sears. Which also exclusively sold Black and Decker. This was Dewalts infancy, the "call to action" if ya will of Black and Decker stepping up to include "Contractor" grade tools. So, those who shy away from Ryobi...take that under consideration.
Ryobi does have its caveats. As you mentioned, tablesaws and miter saws. Those are an outstanding NOOOOO!!!!! As well, Ryobi has recently got into the "Dremel" side of tools and bits. I can't personally speak about their line of carvers n such, but I can speak about their bits. AVOID THEM!!!! Spend a little extra and get the Dremel line of bits or Kutsall.
Ryobi, for the most part, make excellent tools "DEPENDING" on your purpose of that tool. Drills and Impacts. Fantastic. I've had mine for over a decade. You're drilling a hole. Do you need a $200-$300 drill for that? Absolutely not. Circular saw. Mine is corded, I wouldn't go battery powered for that regardless of manufacturer. Mine holds a standard 7.25 blade and has a laser...albeit laser had to be adjusted, no biggie. Again, what am I using that saw for? I am rough cutting lumber. Do I need a $300-$400 saw for that? Absolutely not.
Allow me to list my "Ryobi" tools if ya will.
Ryobi: Drill and Impact-battery, Drill corded. Buffer. Miter saw STAND (extremely well made, holds my Dewalt miter saw). Router table, very well made and durable. Router, plunge, plunge ain't so great, but the router itself has LOTS of power and variable speed. Battery powered trim router, agreed, a bit awkward but I got it on an Xmas sale for $50 bucks. Works great. Wet Saw Tile cutter. Less than $100 bucks, upgraded my entire bathroom with it including curved cuts around the toilet. Corded belt sander, fantastic. Angle grinder, WOW!!! Mosquito sprayer, TOTALLY kick ass!!! Leaf blower, HOLY CRAP!!!! What leaves? Grass trimmer and brush cutter. Kick ass. AND, they all Fir onto the same gas powered motor, just swap them out. Starts on first few pulls, have had it for several years, no maintenance and starts right up. Tree trimmer chain saw. I've got 12 Oaks in my front yard alone over 70' tall. Slap that saw on a pole and go to town. Battery powered fan and shop light....Got both PLUS a battery and charger for less than $100 bucks.
ALL of those tools....NEVER had to return and ALL still work flawlessly. I've had Makitas, Boshe, Milwaukee tools, each of them failed. Dewalt and Ryobi are the only tools in my shop and I can build ANYTHING someone else can with more expensive tools and have equal or BETTER results for wayyyyy less money.
I will BASH Ryobi on one thing though.....Their batteries.....There is ZERO indication that it's about to die on ya.
One minute you're using it and everything is fine....Ya put it down, pick it back up and BAMMM. Dead battery.
You yall read all of that....Virtual Fist Bump to ya.
Thanks Mike! Ha yes, you have been a voice for me to try Ryobi. I appreciate your input!
Great review in itself
Great review! Impartial and not biased. I have Ryobi products and purchased them just for reasons you mentioned. I don't use them daily but have put them through the paces over time. I do take care of all my tools and imagine that is why my drill driver and impact driver have lasted 13 years and still kicking. You hit the nail on the head when you spoke of the batteries and cost. That is what attracted me to Ryobi initially.
I am a handyman/carpenter and I have committed to Ryobi HP platform for all the reasons you have stated. I have no regrets. Great video, God Bless.
This is the way the HP platform is the sweetspot
As a DIYer, I’ve been using Ryobi for about ten years. I love the battery compatibility. The only issue I’ve had with my Ryobi tools have been with their 18v nailers. I’ve had two, and both broke. I personally love their drills/drivers 1) because they have a light and 2) they have the magnetic base to hold bits.
same here. 18v nailer seems to be stuck after a few months use. I've tried to adjust everywhere that is adjustable and non of them works.
I've never used an electric nailer that didn't have issues. They just don't have enough power to reliably clear each nail and they jam up all the time. After enough jams, things go seriously wrong. For cordless nailing, gas fired (which I guess have electric ignition, so they are technically battery powered as well) seem to be the only type that are reliable over time. And, if you don't use it all the time, the gas cylinders are a lot cheaper than even the smallest air compressor.
Same here! The mosfet can’t handle 18 volts. I had to pull mine apart and direct wire it to finish a job.
I have bosch for work but recently started using ryobi garden tools and they're fantastic especially for the price. Mower, chainsaw, brush cutter and hedge trimmer work great. Their features and ergonomics are really well considered. I'm aware that I need to be more careful with them compared to my bosch tools but I'm still very pleased.
I'm same, Bosch blue 18v cordless for my trade tools, and ryobi 1+ for my garden - mower, line trimmer & edger (expand-it) and a hedge trimmer. I have found the said garden tools to be brilliant.
I feel like Ryobi has stepped up a lot in recent years. Went from like a Black & Decker type brand to something pretty legit. My chop saw and circular saw are Ryobi.
Love my ryobi. They allowed my to start and build mu toolkit rapidly. A few years ago when I bought a medium sized chainsaw and a polesaw, greenworks' had much better reviews than ryobis so I went with greenworks for cordless, electric chainsaws.
Good description. Definitely not the top of the class tools, but very descent products for light duty us. I just build a wall closing off a loft. Used my Ryobi circle saw, impact driver (brushless), drill, and I'll be using the brad nail gun for putting the trim back on. All the tools work well and are fine for small projects. If I were building a whole house, then get the Milwaukie. Ryobi is great value for solid quality products.
black and decker and ryobi junk tools
@@yourkiwimatelike your mother
I have been using a set from Ryobi for at least 15 years. Exactly as you stated, they are a good choice for the home DIYer, but would not be first choice for contractor service. That said, I have been satisfied with them.
You never get better tool reviews than from the US, these guys, like you, are enthusiastic and balanced. Great, interesting video. Thanks.
First time home buyer, here. Your described use case for these is exactly why I went with Ryobi. They're great for the occasional DIYer. I have their 40v brushless string trimmer, one of their impact wrenches, and one of their palm sanders. I've been really happy with all of them. Their battery compatability throughout their massive product catalog definitely played a role in why I chose them. Great video!
Being almost entirely A Dewalt shop, I was hesitant to buy into a new battery platform. But then I found the Dewalt Battery to Ryobi tool adapter, which allows me to buy Ryobi tools, but still use my Dewalt batteries. I especially love the Ryobi glue gun…it’s terrific! As always, thanks for your videos!
Dewalt has terrible cordless drill i has some but big shit i fight all my Dewalt tools to trash because have too heavy use,no balance in hand use, broken alltime very expensive, not good, i buy all my factory handtools ryobi 3 year before and fight all Dewalt,makita,boch to trash, lot better working now. and not has come broken any tools after i change all tools to ryobi. Dewalt,rigid,bosch,festools has alltime broken or shit battery need many battery one little work, ryobi can workig one battery all day 8-12 hour no need change battery.
@@mattivirta wow - i borrowed 2 drill dewalt XR drill motors from a buddy - and then were both much more balanced than my ryobi drill motors and esp. my ryobi impact .. which is noisy and one speed.
Thank you , great content ,I was a Bosch person until I started with ryobi, now I have 9 tools and I’m waiting for my birthday to get a brushless drill to replace current one. I agree with the weighty situation with the router as well . Keep up the good work
I purchased my first Ryobi cordless drill 25 years ago. I was a cheap DIY and couldn't spend 2.5X for another brand. The tools were blue at the time. When I decided to finish my basement, I purchased the cordless combo kit and a cordless reciprocating saw. These were inexpensive and used the same 18V batteries that I already had. They were blue as well. Since then, I've purchased the new line of brushless tools including their cordless circular saw and new drills. All of the Ryobi tools that I've purchased are still working. All of them...even the ones I purchased 25+ years ago. I own a bunch of Festool tools as well and know what works best for me. The Ryobi line is great for a lot of folks. Tools snobs and those married to another platform won't love them, but to each their own. The only Ryobi tool I've been disappointed in is the jigsaw. I replaced it with a Festool jigsaw last week. :-)
The Ryobi drill is amazing. I treated mine so badly - completely overloaded it mixing tons of concrete, dropped it off decks, accidentally left it in the rain for days, spilled paint all over it etc. It lasted 5 years and I was amazed. Bought a replacement immediately and was so cheap. For the price you just can't go wrong.
Damn
not cool man
That’s not cool bro!
I love mine as well; I have a drill driver and impact driver that I got in a combo kit (along with a nonreciprocating saw, circular saw, and multi tool) about a decade ago; the drill driver is still going strong, despite constant use and abuse (not quite what you put yours through, but still!). My wife suggested I might want to get a new driver this past black Friday and, while I thought about it, when I saw that the newer model lacks the mag tray, I decided mine worked just fine, even if it was a little rough looking around the edges. In fact, everything in that bag is still going strong, and I used all five of the tools within the last week.
Don't believe a single word you say! no cordless will survive rain for days!! is a tool! is not a magic show!
My problem: female with tiny hands that has problem removing battery; brain fart- just put BLASTER on the inside connection and inserting removing the battery is slick & easy. Thank you for your informative 731 Woodworks Videos. I am basically self taught from books and ‘RUclips’ videos.🦋
As a DiY homeowner, it's Ryobi for me. Battery compatibility is key for me. I've several of them and one of their pod chargers. Had them for years and convenient knowing I can just grab a battery and a tool and do the job. Not one battery for this tool, another for that one plus whatever chargers. Great review.
I love my Ryobi tools, have been in the platform since they were all blue. Have never had one actually fail on me and I have remodeled more than half my house and built a 12x12 shed using them. I probably have more than 30 of the tools now and will continue to buy them as needed. Just bought the stick vacuum and speaker last weekend, wife loves the vacuum and the speaker lasted almost 12 hours with the 4ah battery and sounds pretty good.
I use my Ryobi half inch impact wrench almost every day putting boat trailers together. Also have a mini weed whacker, transfer pump, portable vacuum, reciprocating saw, flashlight, even a mini 5 inch fan in my bed room. I've had the half inch impact wrench for 2 years when I paid $99 for it with a 4AH battery and charger and that's the start of me getting into Ryobi. Love them.
As a beginner woodworker, I've been researching different brands to slowly replace my old cordless Porter Cable power tools(tools still work great, but the batteries are wearing down after 15 years). I started looking at Ryobi and was impressed with the variety of tools available and they almost fit my budget. Looking at the larger tools, I agree that the table saw quality isn't the best, so I would probably go with a more premium brand. However, I bought the Ryobi 18v miter saw and it seems like a much better quality tool, plus it was a great value for the price this past Christmas. I've only had it a few weeks, so I'll have to see how it performs long-term.
Hey Matt, this seems like an extremely fair assessment of Ryobi, from what I can tell. I appreciate that you dug deep for the history and even took polls about the tools before hand… You did your homework and we appreciate that thoroughness! I have a few Ryobi tools. I’ve been happy with the cordless brad nailer and caulking gun, not too crazy about the router or the drill bits & router bits... my Ryobi plunge router always plunged unevenly, and actually got worse as I had it.
I switched to Ryobi years ago and I'm super happy with them as a home DIYer.
I have the table saw and sliding mitre and actually use them quite a bit, no issues.
I personally love Ryobi tools. I have never had an issue with them. The only thing I would probably skip out on is the drill bit and countersink drill bit sets. They are not the steadiest, and I have broken a few before. I love how lightweight they are, as well as how they fit in my hands. Gotta love the interchangeable battery system, too!
ME TOO!!! I am a woman and love my Ryobi tools!
I've used drill bits from everyone. They are all mediocre at best. Harbor Freight bits just as good as name brands.
@NATIONAL Security and Automation very true...I love Harbor Freight. I get some of my essentials from there instead of getting them from the big box stores.
I find the impact driver and drill a little uncomfortable, same with Milwaukee's little drill and impact. I like the way dewalt feels after a few hours but value-wise Ryobi has them beat.
I started as a handyman 3 years ago and I picked Ryobi because of the amount of tools and the battery. Out of the 3 years I've been doing my handyman service, I only had one tool die on me. That was the oscillating tool. I do have that table saw and that miter saw, I think it does all right. For what I needed to do which is cut wood relatively straight it does a job.
same
Great review. We live on a 3 acre country property in Western Australia and have loads of Ryobi and they all work well. We have two 8” chainsaws, one on an extender pole, sprayer, lawn mower with mulcher, hammer drill, Secateurs and an angle grinder. No issues with any of them. Small chainsaws cut much thicker than recommended and since a lawnmower catcher is useless on a property the mulcher insert works a treat. So they do get more of a workout than your average home diyer but have not had any fail.
I live in Anderson and drive by the Ryobi facility a few times a week on I-85. I never really knew why they built such large offices until this video. That's really cool to know that their innovation center is there. They've also been building some additional buildings 1-2 exits down.
I think the main takeaway from all of these tool brand review videos is to "do what's right for you."
Nice Matt. FYI I had a Bosch corded router that burnt up just like that. I exchanged it for the exact make and model and haven’t had any other issues. It seems that no matter what brand you choose, sometimes you just get a dud!
As a new woodworker, Ryobi was the most approachable brand and most affordable. Personally so far they fit in my hands better than some of the more expensive brands
Yeah, I think you nailed it. I was a professional cabinet maker / contractor, and I used pro tools. I am not a pro now, and I use tools maybe 10 hours a month, rather than 10 hours per day. Ryobi are just fine for me. Actually likely better for someone who has the "feel" for when a tool is being abused. A lot of beginners are going to over stress the little brushed motors. The brushless are quite a bit better.
Having already been bought into another power tool line, I decided to expand into Ryobi also for their oddball tools that either have no equivalent with the line I have, or are seldom needed but quite useful on those occasions. At Ryobi's price point, I can justify the purchase.
They're PVC cutter is very good and half the cost of the big boy brands.
I have a lot of Ryobi tools and never has a single one broken. They're the best I've ever own and will keep buying them. I have a reciprocating saw, blower, edger, weed trimmer, push mower, drill, hedge trimmer, and circular saw. Love em all
I have a few of Ryobi tools and I LOVE them. The only thing I would advise (and that is probably valid for other brands) - is to stay away from sets and kits. Their tools might look the same as the ones you can buy separately, but they actually are not. Separately available ones are usually more powerful and/or offer more features. Plus, you buy what you actually need, and not what the company tells you what you need.
The Ryobi days tool sets, buy a battery kit and get a tool, are usually lower quality tools compared to the single tools for sale. You can find good ones, I got a P262 impact wrench and a battery kit for a good price. I ended up buying a lower price impact driver - it worked for the job, which is important, but I am going to return it for a better model cause the P262 spoiled me, and I guess the better model will have better future proofing.
Do some research about product models before purchasing!
Especially true of the impact wrenches
I doubt that! The tools are the same in the kits or not it's just that they have varying tool models just as the big boy brands have various models of a drill.
I started with a Ryobi string trimmer because it was $20 used with battery and charger. Now I've got their driver and a drill and feel they work really well for the price. I'm not doing heavy construction with them, but they handled building a laundry room very well. What sold me was the battery compatibility.
I got a Ryobi string trimmer in 2009 for like $60. The old NiCad batteries didn't last more than 10 minutes and my home had a LOT of edging and trim that needed cut. I also picked up the cheap leaf blower which was under-powered for the 3 trees that needed the leaves blown each year. I gave up on it and went back to my beloved gas powered tools. Now 16 years later, I've moved into a new home with a larger property. It's super easy to take care of the 1/2 acre here and way less trimming. I've pulled out the old trimmer and blower and upgraded to a 9 amp hour Lithium battery. I can now trim and blow my entire yard when I use the riding mower to cut the grass. They are 1/4 the weight of my gas powered equipment. And the battery lasts for 2 mowing/trimmings without charging.
I love most of Ryobi's smaller tools. I have been using them for years and have never has a bad experience. I have used Dewalt, and Milwaukee tools on jobsites and found that for the type of projects I do on a regular basis at home, Ryobi works. They have stood the test of time for me and have been through some abuse on my part. I agree that when you get to larger tools, chop saw, table saw, etc. you definitely get what you pay for. I am about to retire my Ryobi table saw and upgrade to a higher quality brand. It served its purpose but I would not trust the its accuracy for fine precision woodworking. Thank you for putting out these videos and helping all of us DIYers see where we can add value to our tool collection without breaking the bank.
My first table saw was a Ryobi, 10 + plus years ago. Then I tried the Dewalt!!! BIG difference. The Dewalt fence is much more accurate and the micro-adjustments knob is a game changer.
That's how my shop is too... the cordless tools are mostly Ryobi but the heavier bread and butter machines like my contractor saw and planer are DeWalt. With Ryobi, I can catch sales regularly enough that knock off another 30%+. With a little planning, I can generally save a ton, especially on their batteries.
I started using Ryobi tools when they were blue. I choose them due to price and at one point wanted to try another brand but again price won. In my opinion, Ryobi is now competing with professional brands and can handle bigger jobs. I've had two contractors test my P238 impact driver and was impressed. One used it to drill several lag bolts through 6x6 cedar posts for a gazabo and another drilled self-tapping screw through 2x4's into a 14 gauge square tube for a sliding gate, they both continued using the impact! Majority of my tools are Ryobi and I will admit not all of Ryobi's line is ready for heavy lifting, so I do have other brands in my shop.
i've used the Ridgid lifetime warranty a few times and they always take care of me.. they even send me just parts to make repairs myself instead of forcing me to take the tool to an authorized repair facility and have them do the repair.. internal parts that require disassembly too.. that was impressive..
I am a full time wood worker. I decided to upgrade to “better” drill and driver and purchased Porter Cable. I’m back to using my Ryobi drills. The battery life is longer and provides better power.
20 years ago, Porter Cable was a good tool. Now they are Harbor Freight material
@@ewetoobblowzdogg8410 there is an argument to be made harbor freight has some better drills and drivers than porter cable & most of the gutted stanley B&D lines
@@moldyzucchinis3251 Gotta agree with you on that one, especially these days. HF has stepped up their game alot, but has always carried some decent stuff for any market. Their floor jacks are top notch
@@ewetoobblowzdogg8410 that new daytona the talk of the town where I work
@@moldyzucchinis3251 Gotta get the 3 ton low profile, not the 2. I lifted an incinerator that was the size of a large safe like it was made of feathers
Great video Matt. Couple of things.
Go brushless if you can.
The gearboxes are not built for continuous use, so, when you run a battery from 100 to 0, leave the tool cool down especially the grinder & the sawzall.
The 18 gauge nailer is one of the best thing they make.
Hedge clippers, brush cutter & chemical sprayer are great too.
Good platform for the price & the range is fantastic.
I liked alot of the stuff they make, but you managed to circle in the worst two tools they have; recip saw and angle grinder are... well... really not good.
My old Ryobi grinder could heat the house after light use. 🤣
I liked the drill, impact driver, OMT and even the small inflator.
I have a roofing and siding company and i started using ryobi tools for fun over 20 years ago, and not a single one has ever failed! So i just keep using them :)
I think another point is that Ryobi often make multiple versions and models of the same type of product. The impact driver is a perfect example, there are at least (that I've counted) 3 or 4 models you can buy that all have different features. The driver I have does have 3 speed modes on it but costs obviously a little more than the base model. So for those that want those features they exist, and for those that don't need them you can save a few bucks.
i remem ber seeing the picture of that giant impact driver.
I got an early driver. Recently got the high torque one for taking off lug nuts. Because the old ones didn't develop enough torque.
Great video Matt, the tti facility is about 10 minutes from my house in anderson sc. it’s a spectacular facility, and they have a factory outlet where you can go buy discounted tools
Very cool!
Bought a small kit and added to it. Love the 18 gage nailer. Ryobi days are like Christmas for 4 amp batteries. Love your channel. Keep up the good work.
sadly this year's Ryobi Days sale is crappy. 1 4ah, 1 2ah, and get 1 4ah as a tool. Unlike last year. It sucks. Makes me not want to get anything lol
Thanks, Matt. This has rapidly become my fav channel. You are super insightful and people can tell you are a been there done that kinda guy based on the way you review tools. As far as ryobi, i bought my set based on everything you said at the beginning, but primarily because of battery swapability. For bigger jobs and longevity, obviously go for the plug in highend stuff. For us weekenders, ryobi has my money. I've built a garden, deck, cutting boards, workbench, and numerous other projects around the house with just ryobi. Keep up the great work. I'm interested to see if you ever get into lathe work. I'll stay tuned.
I have a ton of Ryobi tools both 18 and 40 V. I agree with you that some of them are really worth having. I like the versatility that Ryobi offers. I would love to see you build something using the Ryobi tools you have.
I’ve had a Ryobi chop(miter) saw since 2009 and I have built kids playhouses and cut railroad ties for garden beds secret door bookshelves and more… I love it.
Ryobi really seem to have stepped up their tool game over the last few years. The quality you get for the price makes them pretty damn appealing these days.
Plus the 6 year replacement warranty they have here (3 yrs for batteries) is pretty attractive
Most definitely, they're up there with Ridgid now, not as good as Dewalt or Milwaukee or Makita but they are definitely much better now
I sold all my craftsman and switched to Ryobi. I love their tools for general crafting like the clamp on magnifier/ light. Makes my life so much easier. Picked up a vacuum and the HP 10” sliding miter too. The 10” sliding miter came with a 4 amp battery and the saw stand for $270. Kinda hard to beat and does everything I need as a non professional. I’ll always love my dewalt stuff but I think Ryobi will take a considerable amount more of my money in the future.
Craftsman is vile. They are merely riding on their 20th century glory. They are equal with Black and Decker in quality although B&D is a far better ecosystem.
We started with the Ryobi 1 system a very long-time ago and love them with heavy use! Only had one break- mider saw (operator error) and it was fixed and no cost! Just got the brushless jigsaw and love it! Im over all the tool snobs! Peace ✌️ and great video
As a ryobi guy myself i can say some tools have their downsides but starting off especially just for a hobby they can do everything you need them to at an affordable price
I don’t have much experience with Ryobi, but I do think they have their place in the tool world.
I really think you should try out Flex tools. They really hit the ground running since their release of their 24 volt line in 2021. They have also extended their lifetime founders warranty through 2023. I bought into the line and love them. Definitely worth a try. Only downside of the line is the amount of tools they have at the moment, but that is because it is so new. They are releasing many more tools this year.
Have around 25 tools from Ryobi. One tool have totaly broke down on me, a sander thats 10 years old. Some of my tools are not that great, but all of them is useful and do what they should. What most people hating on Ryobi is not getting where Ryobi is placed in the market. If you are a professional carpenter or something like that (I am not btw), you probobaly should go with something else. Ryobi is located in the market for home owners and similar use, and is priced like that. Many of those hating on Ryobi is comparing the brand and the tools with much more expensive brands and thinking its the same. I love my Ryobi tools even though they are not perfect. The variety, price and performance is awesome and I do not regret getting into this ecosystem one bit.
Love the different options that Ryobi offers, it was the major selling point, along with the battery platform not likely to change. My newest favorite Ryobi tool is the air-inflator which works great as a duster for my PC. No more cans of compressed air, this thing does great. I have lights, USB-charger, saw, drill, etc with Ryobi. Makes it hard to move to another brand with so many useful tools. Hot glue gun, tire pump, dremel, soldering iron, I mean does Dewalt do all that? I don't think so. My old Dewalt drill? Yeah they don't make the batteries anymore. I had to buy an knockoff battery, and I gave it to my Mom to keep at her place. Haters gonna hate, but to me it's just ignorance.
Not only does Dewalt not make the batteries anymore but their own battery adaptor is unnecessarily clunky (like it looks like an aftermarket creation rather than an official one in the way it plugs into the old tools) and above all else, expensive: it costs almost as much as their smallest Li-ion batteries, which is really kind of insane when you think of what it actually is - some plastic, some pins and wires and a control board. Indeed the clunky adaptor with its weird offset angle thing causes it to limit the range of cutting depths on my old circular saw when it has one of the bigger batteries (5Ah) attached. I really wish I had bought into Ryobi rather Dewalt about a decade ago when we still in the late Ni-Cad era.
I am a beginner woodworker and I have a Ryobi table saw and so far it is working well for me. If I pursue this any further then I most likely upgrade, but for mow I am very happy and satisfied with this table saw. If you ever make a comparison I would love to see that.
Funny. I tell buddies Ryobi is perfectly fine, but just steer clear of their table saws. I had one for awhile and it always felt under powered and dialing in the fence was annoying. I ended up replacing it with the DeWalt 10in jobsite saw, and good lord that was a huge upgrade. That being said, Ive also owned Ryobi miter saws and never had a problem with them. They're great.
@@CPtheCoug Agree. Hated that table saw. Replaced it with the Skil(not the best but a great upgrade). No matter what I did, it couldn't stay "inline". Miter saw is really good, drills are good... stay clear of the biscuit cutter(oye so bad). Save some more $$ and find a Directtools outlet. Great set of tools for a home worker.
@@CPtheCoug - hahahaa, I JUST commented that too
He has a video on the Skil as a great entry level or budget table saw. WHEN the motor on yours fails, or when the fence inevitably won't lock correctly, Skil might be your next step (yeah, that's my story too lol)
@@CPtheCoug I started out with a Ryobi table saw and the fence drove me crazy. I had to calibrate it almost every time it was moved.
I bought a set of 18v ryobi tools when we bought our house 12 years ago, and more over time. They’ve held up very well with light and medium duty use. A couple years ago the batteries started failing, so I’ve replaced them, but to get 10-12 years out of the batteries and have none of the units fail in that time is quite good in my opinion.
You hit the nail on the head here. If you're a professional, or someone using these tools heavily every day, its best to avoid Ryobi. But for 90% of homeowners and hobbyists who use the tools occasionally, Ryobi is great.
Agreed. I’m a DIY homeowner (pretty handy) using Ryobi tools for years and haven’t had any problems with any of them. I will say though, I’m an Electrical Engineer working in construction and visit a lot of job sites and see contractors using Ryobi tools all the time. Most say that they work great and cheap enough that if they break due to employee neglect, they don’t feel bad about buying another.
I use the brushless Ryobi tools professionally and I haven't had any issues the past couple of years. I burned out a recip saw that wasn't brushless. It still works, but I got it to smoke so I don't use it anymore.
The only thing I haven't figured out yet is if the batteries are lasting as long as other brands. Never have a second tool doing the same job to compare it.
@hulkhuggett The brushless Ryobi are pretty decent, but I wouldn't want to be using them all day, everyday. More for comfort. I have Ryobi and Milwaukee m12 and m18. I really love the m12 stuff for comfort and size, but whenever I want the extra power, the m18 stuff is just more comfortable and feels better than Ryobi.
@@mikebonom My first thought was the same that Milwaukee felt better in my hand. After using the brushless Ryobi for a while and then grabbing my Milwaukee I didn't really notice it anymore. I haven't used the M12. I keep my Milwaukee at home and take Ryobi to work.
@@mikebonom not necessarily true. I see more and more Ryobi tools on construction site
I've been invested in Ryobi since my first years as a homeowner in the blue tool days. I stayed with them for compatibility and because the value was there for my limited needs. I now have 20+ tools and have really enjoyed the non-traditional ones. The nail guns and the outdoor line have been especially helpful and somewhat unique at the time I picked them up. I still have the blue drill and impact driver. As I look to replace them with something more compact, it's obvious that Ryobi is also held back by their larger battery footprint. I want to stay with them, as I have 12+ batteries, all 4+ Ahr, but I'm also drawn to the more compact offerings, especially those 12 volt ones. I would love to see Ryobi offer a limited 12V lineup that does not cannibalize their One+ 18V tool commitment.
Great video! All of my battery tools are Ryobi. My plug-in tools (110v) are a mix of Milwaukee, DeWalt, Makita, Ryobi and Rigid. I agree completely on the DeWalt saws. I had both a Ryobi miter saw and table saw and it took a lot more time to build something square and straight compared to my DeWalt miter saw and table saw because I kept having to remeasure. The DeWalt saws are just on point every time. I've only had 1 newer (green) Ryobi tool give up the ghost on me and it was the multitool - replaced it with a Rigid plug in and have had no issues. My drills and drivers from Ryobi have been great the only issues I've run into is with batteries failing prematurely. I had a couple of older blue Ryobi tools that went up in smoke but they lasted for many years. Thanks for the content.
The poll results really surprise me. I bought the ryobi 18 gauge brad nailer and started making wooden American flags in late August last year (never done any woodworking before then) and as soon I I posted them on Facebook the orders started flying in. From basically the first of September to Christmas I made 31 flags and used it pretty much every day with absolutely no problems. And even with all that use I only had to charge the battery once. I got the ryobi radio with Bluetooth for Christmas and it works great also. Now I’m thinking about a project for my scrap. I’m thinking about doing end grain coaster sets. My next ryobi purchase I’m planning on is the angle grinder. I want to give wavy flags a try. So needless to say I guess I’m one of the few that has nothing but good things to say about ryobi.
The Ryobi nailer really is punching above it’s weight for the price.
I relish the Ryobi hate while I build great stuff for way less. I've had a couple of their tools I thought "damn... this could've been better", but more often than not they're great. I bought the high pressure inflator for like $26 with a Christmas gift card. Instantly one of my favorite tools.
That’s a great tool. I bought one and a hand vac for each car in my family. Works great.
I bought one of those a month or two ago, it has saved me a few times now here in the winter. So much better than lugging out the compressor. love that it clamps on to the tire stem and has a long enough hose that you dont have to stay hunched over while filling your tire. Best 15 bucks I ever spent (I think it was on sale from 20)
@@chaddrumhiller8301 100% agree. I don't have a compressor at all so for me it's the difference between going to a gas station with (hopefully) free air or walking to my garage.
@@macbergson hand vac for each car is a great idea. Maybe a hand vac, small flashlight and a battery each. Good little kit.
yeah I love my inflator too, but I did manage to break it charging up a fire extinguisher; a water and air pressure type; I pumped it up to over 100lbs and the inflater hose separated from the compressor. I was able to fix it by taking the cover off and use a hose clamp to re attach the hose backnti the compressor.
I've used Ryobi 18 volt tools for over 20 years. I've found them very durable, and I like the wide variety of tools available.
Im an average Joe DIYer and I love Ryobi tools. I never understood any hate on them unless people are just set in their ways on super high-end pro brands. One of the best things imo is the battery platform. Even if you're buying a new product you dont have to worry about getting new batteries because the same ones you have at home will fit. Also, they have SO many sales and bundles that you end up acquiring extra batteries at basically no cost to you. Never have to worry about whether you have enough power to take on a project and its peace of mind knowing im not gonna have to lose my momentum on something just to sit around and wait on a battery to charge. Also they are very affordable. Ive never done any pro level construction so I can't speak to how they perform in a professional environment but from what I have read they do well. But I digress. My option is you can't choose a better brand as a DIYer.
If you're a Contractor who makes money with his power-tools, you buy Makita, Milwaukee, or the higher end DeWALT models. If you're a typical homeowner who needs power-tools to get occasional projects done, or to help maintain your house; you buy Ryobi. That's it in a nutshell.
Im a Ryobi junkie, used to walk by them too until i tried the lithium line years back. The 40v chainsaw, mower, weedeater, pole saw are fantastic! So far, havent tried an 18v tool we haven't loved! Way better than the old 96' models!
I actually had much experience with ryobi. It started out with the starter kit like you bought and I have added many more since. I am in the final stages of finishing my house and I am proud to say that the entire thing was built with nothing but ryobi tools. The only time I have had them fail on me was when I was constantly cutting pressure treated 2x12 and when I was using the drill to stir some concrete. Other than that no problems whatsoever
I've been using Ryobi 1+ system for years. Started out with the blue, and have since added the green in almost everything I could dream of needing. I am a weekend wood worker (woods wood works) and plan to retire to the wood shop with my Ryobi, they have only let me down once with the Sawzall. But I bought another one just like it😃
You convinced me, after watching this video I purchased the Ryobi circular saw and nailer, plus two batteries and charger. I will only use them for very occasional dyi projects, so I don’t need the most expensive tools.