1. Thank for being DAMN GOOD at what you do!!!! 2. Thank you for the safety protocols!!! 3. Thank you for the informative video I look forward to seeing more!!!!
Well done Evan..when it comes to polishing aluminum surfaces..its you then everyone else in my book If I need to have something polished..you would be my choice..cause I know it will be done properly and the finish will be top notch...stuff you do gleams...))
You need to invent an electric roller that you can sit on the ground to spin the tires for you. Maybe have a foot pedal controller like a sewing machine.
Am I able to polish ceramic coated A.F. aluminum wheels following the steps you're taking to polish the wheels as you are? If not, what other steps would I need to take?
Just curious when I used to polish in early 2000s I would have used 800 1200 1500 1800 and 2000 grit before I started buffing. I didnt use the same rouge as you . But my stuff always came out deep. Does yours look cloudy only standing to 600 or does your rouge take care of it.
What do I do if my stock tires were 29 inches and now I have 4Ds? I have no "A"-frame to use as a lift point for my jack....where do I raise my BGT from?
Damn bro , what's the name of your company ? .... 2 Guys details ? named shake back and on point because you shook those rims back ........AND THEY ON POINT .
Devin Taylor The Bars are polishing compounds with very fine abrasives fillers that can polish a variety of surfaces. The green and brown bars are typically used for aluminum paired with an angle grinder and buffing wheel. You can get everything you see used in this video from out website! www.renegadeproductsUSA.com Hope that helped. Let us know if you have any other questions!
I just purchased my first set of 24x14 polished American Force Wheels they've been on the truck two days. Is there any reccomended care I should take on a new wheel?
Thats why ill stick with my cast wheels black and milled. Its a shame, spend high $$ for some forces but takes soo much work to keep looking nice. At least ceramic coat them or something
Do you have an email. Im having a hard time bringing my shine back on my 2007 chevy hhr LT 17 inch wheels. If you could quickly mentor me, i will appreciate that greatly. Thanks Rich
Damn good to watch someone who you can tell is 100% competent in what hes doin... Solid work man
Those wheels look amazing and thank you for explaining how its done.
Who is in charge of this guy music 🎶 this guy video be straight jamming!!!! Enjoy ur videos thanks from Atlanta
Love how this guy explains every step that his is doing 👍
This is why I love billet wheels. So easy to fix imperfections
1. Thank for being DAMN GOOD at what you do!!!!
2. Thank you for the safety protocols!!!
3. Thank you for the informative video I look forward to seeing more!!!!
You are the Master Polisher.. thanks JD
what kind of sealer do you use, or do you just leave it after the final buffer passes?
Came put so sweet & clean
Nice work
Amzing work well done
🙏🏼🙏🏼
Wow Thats unbelievable. Excellent job!
This dude knows his shit fo sho but the TUNES is BANGGIN!! Anyone know the group or song?
Is that just regular 600 and 400 grit sandpaper
The beat is at 0:22 is a hit! Do you happen to know the instrumental?
You really know your stuff man that was beautiful work
Hey Evan I watched all your videos man great job I’m new to sanding and polishing what speed do you run Makita DA at?
Well done Evan..when it comes to polishing aluminum surfaces..its you then everyone else in my book If I need to have something polished..you would be my choice..cause I know it will be done properly and the finish will be top notch...stuff you do gleams...))
How much does a pro polisher charge for a job like this?
Beautiful work sir
Shew that looks like a lot of work. Turned out great though. As expensive as those are why couldn’t they just clear coat them and be done with it?
Dammmm whole new wheel
How much do you charge to polish wheels
You need to invent an electric roller that you can sit on the ground to spin the tires for you. Maybe have a foot pedal controller like a sewing machine.
question... can you ceramic coat on top of polished surfaces for an easier cleaning?
It’s not recommended as oxidation will still occur and then you have to sand the ceramic coating off to polish
you are bad ass with that
Wish you lived in Texas, I would pay to have this done!
LOL,,,,that is not a truck,,,,it’s a street princes. As for your work,,,,amazing and very professional.
Where in the fuck can i find a variable speed grinder or a low speed one. So hard to find around here
Am I able to polish ceramic coated A.F. aluminum wheels following the steps you're taking to polish the wheels as you are? If not, what other steps would I need to take?
What size grinder is the Makita? And it’s called an orbital sander as well correct?
New to this abs trying the learn. do you always have to sand it first and if so why?
What do you use to seal the aluminum from corrosion over the next 2 years?
What was the last grit that you used before polishing?
Ok now how would I go about sanding inside the spokes on a AF wheel like mine are pretty nasty on the back of barrel and the inside of spokes
By hand
What grit sand papers did you use in order only thing I didn't hear you say? Thanks
You can start at any grit but usually most polisher sand up to 800 grit
Looks great, Keep up the good work. 👍
How do you keep from having the polishing wheel grap the faces. When I try my wheel grabs or shreds my wheel. Speed? More polish?
What do you think about ceramic coating them after polishing them??
10:20 кто догадался вам крутить колесо машины голыми руками это просто жесть !!!!перчатки трудно было одеть...
Just curious when I used to polish in early 2000s I would have used 800 1200 1500 1800 and 2000 grit before I started buffing. I didnt use the same rouge as you . But my stuff always came out deep. Does yours look cloudy only standing to 600 or does your rouge take care of it.
What would charge for for polishing 24x14 Specialty Forged's?
Does it matter what direction you go? I seen you went front and back
Lol can you not go into gravel with these mall crawlers? 😂😂
Bob Doee too much money in these rigs for that keep a good lookin beater on the side
What do I do if my stock tires were 29 inches and now I have 4Ds? I have no "A"-frame to use as a lift point for my jack....where do I raise my BGT from?
How do you get around the lug nuts?
What's a job like this typically cost to get done?
Where do ya live I will just bring my truck to ya just kidding thanks for video
What Makita grinder is that? I’m on google and they have many different inch, could you tell me which one it is please?
i need the hook & loop pad the disc goes on the rotary sander.
what is that part number?
How many times can you polish your rims ?
wow grreat job and video thanks
cost to do that 4 wheels
We’re not polishers. We make the polishing products
What rpm should I be running with orange & brown & white & green?
Great video
Can u tell me the compound grades and colours please
Damn bro , what's the name of your company ? .... 2 Guys details ? named shake back and on point because you shook those rims back ........AND THEY ON POINT .
Can I use them compounds on chrome plated wheels ?
It possible to ask some questions? I know this video is old
so how long did it take to do that one wheel
About an hour and a half if you have the skill set
Need a motorized wheel spinner if u doing that full time
Awesome👍🏻
What rpm do you run each pad ?
I’d keep things at 3500 rpm bud
What does a job like this costs?
Amazing! 👌
What exactly is the bar things. And where can I get them from?
Devin Taylor The Bars are polishing compounds with very fine abrasives fillers that can polish a variety of surfaces. The green and brown bars are typically used for aluminum paired with an angle grinder and buffing wheel. You can get everything you see used in this video from out website!
www.renegadeproductsUSA.com
Hope that helped. Let us know if you have any other questions!
Ther no (CC) in this video ?
Nice job💯
I just purchased my first set of 24x14 polished American Force Wheels they've been on the truck two days. Is there any reccomended care I should take on a new wheel?
stay out of the gravel lol
How much do u charge for a job like this?
We are not a Polishing company. We manufacture the polishing products.
What does it usually cost for someone to polish my wheels?
$13.75 + tax
Thats why ill stick with my cast wheels black and milled. Its a shame, spend high $$ for some forces but takes soo much work to keep looking nice. At least ceramic coat them or something
Should have spent the money on new tires and sway bar end links instead of paying for a polish job
Good stuff who is your wheel man?
johnny rotator lol
Do you have an email. Im having a hard time bringing my shine back on my 2007 chevy hhr LT 17 inch wheels. If you could quickly mentor me, i will appreciate that greatly.
Thanks Rich
What type of wheels are those American force what??
Jade
Evan what kind of kresperator do you use what is the model no” is it.
Shhhheeeessshhhh
👌👌👌👌
Shit 5 years now those tires better be changed
Take my money
можно было и изнутри полирнуть было-бы в двойне красивее...
Why is the fast cut a cheap gimmick?
The higher the truck the smaller the huh
Forget it
I lime low riders
great polish. clown truck is a joke.
Oh fuck the guy got hes lifted truck onto gravel😣😔
I cant see myself spending allot on wheels then spending more for them to shine lol fuck that , nice wheels thoe but not for me
Basically a rip off of Zephyr
All that shit! Wasn't necessary
Who would put those wheels in a denali smh
chamuko Oros what’s wrong with that?