Hi guys, can we see a close-up with light on these glass surfaces. The title of the video is named how to clear up streaky dirty glass . At the end it was just demonstrated how "hydrophobic" the glass got. Aren't there any scratches left behind by the polisher, pads and products?
I regularly use clay, compound, and sealants on glass. All products involved are safe for paint and clears. Since glass is many many times harder, this would not scratch glass(exceptions is if you prep poorly and used a polisher that picked up a rock or something lol).
🤔 where would the scratches come from ? And if there was already scratches on the window then this video can’t help with that. It’s about cleaning and streak free.
Streaks and film have to do with product and dirt/residue on the surface. If its beading and sheeting off cleanly, you can rest assured the surface is clean (not with streaks and film).
Great effort, watching you do the job and explain the process and showing the products we can buy from your shop. If may ask for another video where the camera shows the true progression? So we can decide ! Thank you
Clay bar is a great idea. Just wish my windshield on my truck was that easy to clean. Even at 6'2" I cannot reach the center unless I stand in the door and reach.
@@ChemicalGuysI have a step ladder and even though I am 5ft 11inches tall with a 34 inch sleeve I cannot reach portion of my hood, roof, and windshield of my 2024 Chevy Trail Boss.
If only there could be like a universal tool, that you could use to still be on the ground and reach the middle of the windscreen.... I know... mount it to a wooden stick and BAM you can now clay your windscreen on the ground.
How do I clean a pile of towels when they all have different products on em and u want nothing on it for the next after the wash. What dial and fabric softener. Or just degreaser etc
I find good results with a strong detergent, warm water, and a couple of capfuls of SuperClean degreaser - that stuff breaks through anything. Adding some Borax can be helpful too. Never use fabric softener - it's filled with oil and leaves residue. It doesn't actually soften fabrics but rather makes them feel softer. Don't use any gentle or delicate detergents or washer settings - you want aggressive. Wash microfiber only with other microfiber, and not other clothes - and I try to wash the towels right away after use when possible because a lot of detailing products harden or cure over time and become harder to remove.
The best way to demonstrate glass polishing would be on an old windshield removed from a salvage car. You could light it well from the inside and outside to really show the effectiveness of the process. It's almost impossible to tell how well this is working. Surprised that no windshield polishing videos have figured that out.
Windshield glass nowadays is softer than 30-40 yrs ago so in the bright sunlight micro chips show up much more now. I wonder if going through these steps help to address the issue.
Glad i found this! I have a 56 chevy with old glass likely replaced in late 80s. I properly washed inside n outside, and og clay barred outside of glass Would this clear or at least help clear up for the most part any light and moderate pitting and sun hazing? And light scratches/streak from old windshield wiper blades? Thank you guys for always being helpful! Any suggestions are appreciated. ✌️
You guys picked a cool car.. but probably the easiest windshield you could do.. I like the video.. I honestly hate glass cleaners.. between using adhesive remover, and glass cleaners.. thanks for the tutorial.
It's crazy how much all these products cost honestly... I mean heck, I can get safelite to come put in a brand new windshield for 300 bucks, or spend 200+ on products and still have to do the work.... I dunno, just seems excessive to have to spend that much on glass when it's probably cheaper to have the glass changed lol... Just my HO
Joey, I like the HydroView a lot, and I use VSS scratch and swirl as well. Can't tell in the video, but you're buffing out some old fine scratches that naturally happen after years of driving, from the glass as well, correct?
your buff towel after the clay bar, I know you were talking to us so probably didn't even know, but you wiped off the clay lube, turned it over to buff dry, flipped the towel back to the clay lube side and wiped again. You then were about to refold the towel to a drier side, but didn't and wiped more clay lube on 😂
Hi, i used some water spot remover. I kind of used the towel to reapply it, and it made the glass a little fogy. Do you have anything that can restore it? Thanks
It can be buffed out with right stuff as long as not deep scratch but regular streaks from wipers that you can’t clean off then they for sure can be buffed out .
What kind of pad is good with cerium oxide? I see you use that typical sponge. Which one is the most fine and which the most cutting? I have some stratches so should i start with cutting and then fine? Rayon? wool?
This was super helpful. Looks like I need a few more CG products to add to the kit. Are these products good for plastic headlights too? I want to protect brand new plastic lights front and back. Thanks
I did followed this process recently. Works great for rain except I must have used an inferior microfiber to apply or buff the HydroSlick and now have lint stuck in coating on windshield. How do you recommend I remove the HydroSlick (without stripping wax from other exterior surfaces) to try again for a better application?
Hi guys. Not long ago I put your Hydro Slick Wax on my car. I'm happy with final effect, but on my bonnet looks like loosing repellent effect. I don't know I used stronger foam or what? Btw question-can I re-apply this wax again? Or really should wash away with for example fallout and then start again new layer? Tom
is there any UV protection with the hydro products? I have been using Jet Seal on headlights for the UV protection but id like the ceramic action also. What are my options? Thanks
Hi there! Yes, adding the Hydro Line will resist harsh elements and UV rays using ceramic protection. HydroSlick is an excellent all around choice for repelling these elements and enhancing gloss.
Does this repair thousands of micro scratches and chips? My windshield looks like, well like I sprayed a fine mist on it when looking out from inside in sunlight. It's actually hard to see out of in direct sunlight, so I need a way to polish out all those little specks
Been using your products for a while very happy with results ,when everything is dona properly and cheramic coating applied ,I dont even need to use my vipers when driving on highway ,all water just runs off , btw you have a clay cloath available? Thank you
Tint is always applied to the interior of the glass and polishing it exteriorly would not create any more heat than your vehicle sitting outside in the sun.
Glasweld has a fantastic glass treatment for residue as well as hard water spots, it's called pro clean, I offer it to my clients with their walk in showers as theres a ton of hard water in my area..
Exterior window cleaning is not that difficult. I have rarely seen any video or products from Chemical Guys for cleaning the windows from inside on tinted glass. Cleaning windows from inside is as important as cleaning it from outside. Hope you recommend a product and cleaning procedure.
OK, so I watched one of your videos and put a coating to protect the windshield. Problem is it leaves streaks. How do I totally strip a windshield and start over?
Hey! Use Streak Free Glass Cleaner to remove haze and grime from the interior side of the glass. www.chemicalguys.com/streak-free-window-clean/streak-free-window-clean.html
This man really just said a cool 70 degrees 😂😂😂 I don’t wanna know your hots then! For us 50 degrees is nice. 70 degrees you’re sweating your butt off 😂
I used your heavy duty waterspot remover on my 2022 Chevy truck windshield and it left streaks that cannot be removed. It can not be washed off or buffed out! This product should be recalled. How do I fix this?!
![SIMPLE SOLUTION! How To Deep Clean A Windshield and Repel Water [DIY]](/img/1.gif)
I did the same routine as in the video on our walk in shower glass - looks amazing - thank you Joey
Enjoy your detailing products!
I remember the first time I had a beer😂 jk nice vid. What about cleaning the vape juice off the inside? Any ideas?
Hi guys, can we see a close-up with light on these glass surfaces. The title of the video is named how to clear up streaky dirty glass . At the end it was just demonstrated how "hydrophobic" the glass got. Aren't there any scratches left behind by the polisher, pads and products?
👍💯🔥 exactly
I regularly use clay, compound, and sealants on glass. All products involved are safe for paint and clears. Since glass is many many times harder, this would not scratch glass(exceptions is if you prep poorly and used a polisher that picked up a rock or something lol).
Smooth un scratched surfaces won't have water stick to it like the coated glass, instead it will bead up. A hydro test is a good indicator of that
🤔 where would the scratches come from ? And if there was already scratches on the window then this video can’t help with that. It’s about cleaning and streak free.
Streaks and film have to do with product and dirt/residue on the surface. If its beading and sheeting off cleanly, you can rest assured the surface is clean (not with streaks and film).
Great effort, watching you do the job and explain the process and showing the products we can buy from your shop.
If may ask for another video where the camera shows the true progression? So we can decide !
Thank you
Thanks so much for your feedback!!
Respect. I'm a Chemical Guys fan and look forward to doing this to my wife's and I windows. I love the products and tutorials, keep up the good work.
Thanks so much for being part of the Chemical Guys family!!!
Very interesting...had no idea there was so much stuff u can do to your windshield!
Clay bar is a great idea. Just wish my windshield on my truck was that easy to clean. Even at 6'2" I cannot reach the center unless I stand in the door and reach.
Working with larger vehicles can be tricky however using a stepladder may be useful.
@@ChemicalGuysI have a step ladder and even though I am 5ft 11inches tall with a 34 inch sleeve I cannot reach portion of my hood, roof, and windshield of my 2024 Chevy Trail Boss.
If only there could be like a universal tool, that you could use to still be on the ground and reach the middle of the windscreen.... I know... mount it to a wooden stick and BAM you can now clay your windscreen on the ground.
What do you use for the interior side?
How do I clean a pile of towels when they all have different products on em and u want nothing on it for the next after the wash. What dial and fabric softener. Or just degreaser etc
I find good results with a strong detergent, warm water, and a couple of capfuls of SuperClean degreaser - that stuff breaks through anything. Adding some Borax can be helpful too. Never use fabric softener - it's filled with oil and leaves residue. It doesn't actually soften fabrics but rather makes them feel softer. Don't use any gentle or delicate detergents or washer settings - you want aggressive. Wash microfiber only with other microfiber, and not other clothes - and I try to wash the towels right away after use when possible because a lot of detailing products harden or cure over time and become harder to remove.
The best way to demonstrate glass polishing would be on an old windshield removed from a salvage car. You could light it well from the inside and outside to really show the effectiveness of the process. It's almost impossible to tell how well this is working. Surprised that no windshield polishing videos have figured that out.
Windshield glass nowadays is softer than 30-40 yrs ago so in the bright sunlight micro chips show up much more now. I wonder if going through these steps help to address the issue.
Glad i found this! I have a 56 chevy with old glass likely replaced in late 80s. I properly washed inside n outside, and og clay barred outside of glass Would this clear or at least help clear up for the most part any light and moderate pitting and sun hazing? And light scratches/streak from old windshield wiper blades? Thank you guys for always being helpful! Any suggestions are appreciated. ✌️
You guys picked a cool car.. but probably the easiest windshield you could do.. I like the video.. I honestly hate glass cleaners.. between using adhesive remover, and glass cleaners.. thanks for the tutorial.
Thanks so much for tuning in!
Wait is coated supposed to be better?
It's crazy how much all these products cost honestly... I mean heck, I can get safelite to come put in a brand new windshield for 300 bucks, or spend 200+ on products and still have to do the work.... I dunno, just seems excessive to have to spend that much on glass when it's probably cheaper to have the glass changed lol... Just my HO
Thank you for the informative video. Which one do I need to remove heavy scratches from my windshield, V32 V34 or V36? Thanks.
Joey, I like the HydroView a lot, and I use VSS scratch and swirl as well. Can't tell in the video, but you're buffing out some old fine scratches that naturally happen after years of driving, from the glass as well, correct?
Great video! Enjoy watching these videos to gain more knowledge for my auto detail business. 💯
Glad to have you as part of the Chemical Guys family!!
your buff towel after the clay bar, I know you were talking to us so probably didn't even know, but you wiped off the clay lube, turned it over to buff dry, flipped the towel back to the clay lube side and wiped again. You then were about to refold the towel to a drier side, but didn't and wiped more clay lube on 😂
Thanks so much for tuning in!
How do you wash microfiber towels after you use a ceramic coating like Hydro Charge+, Hydro Slick, or Hydro Speed?
They also make a micro fiber wash product that works well
My Method of Doing Laundry
Fabric Clothes- Steam Clean, Extract, Blow Dry (15 mins), Protect
Leather Clothes- Spray Leather Cleaner, Steam Cleaner or a Leather Brush, Wipe It Off, Leather Conditioner, Microfiber Applicator Pads
Towels- Steam Clean, Extract, Blow Dry (15 mins)
Hi, i used some water spot remover. I kind of used the towel to reapply it, and it made the glass a little fogy.
Do you have anything that can restore it? Thanks
What else can you use hydroslick for? Thankyou for sharing the valuable information 🙏
Hey! Use HydroSlick to protect any surface that is gloss painted, shiny or clear.
Any ideas on how to safely remove a streak in the glass from a bad wiper?
came here hoping for this answer
Same 😢 any answers
It can be buffed out with right stuff as long as not deep scratch but regular streaks from wipers that you can’t clean off then they for sure can be buffed out .
5:49 your smoke alarm needs a new battery
😆
Excellent video! Do you have a window video without the electric polisher?
I'll be the same process but with extra elbow grease.
What about the inside of the windshield? I can NEVER get that clean. There is always residue plus the angles of cars you can't get a buffer in there.
Hey! We will make sure to make a video on this issue yo are having to show you how we do it!
New to this channel, love your knowledge and subscribed.
What kind of pad is good with cerium oxide? I see you use that typical sponge. Which one is the most fine and which the most cutting? I have some stratches so should i start with cutting and then fine? Rayon? wool?
Do these products fill in any small pitting of the glass surface caused by local sand and dust storms here in Arizona?
I would love to know the answer to that as well
Will the Clay Bar pick up small pine tar droplets?
Absolutely!
This was super helpful. Looks like I need a few more CG products to add to the kit. Are these products good for plastic headlights too? I want to protect brand new plastic lights front and back. Thanks
Absolutely!!
Would the wiper blades judder after the products are applied to the glass ?
Hi there! HydroSlick and HydroView will not cause the wiper blades to chatter.
Quick question: Does ceramic coating will cause the wiper blade to be shaky/vibrate when being used in light raining condition?
Its will happen
Depends on what blade you are using and if product was applied correctly for glass .
Can you do this on tinted windows?
I did followed this process recently. Works great for rain except I must have used an inferior microfiber to apply or buff the HydroSlick and now have lint stuck in coating on windshield. How do you recommend I remove the HydroSlick (without stripping wax from other exterior surfaces) to try again for a better application?
Dawn ultra will strip it off
Will this mess up my windshield on my 2022 Lexus cause it came with a special film on top of the glass
Yes, theres no benefit to doing this unless maybe your windshield is 30 years old anyway.
Hi guys. Not long ago I put your Hydro Slick Wax on my car. I'm happy with final effect, but on my bonnet looks like loosing repellent effect. I don't know I used stronger foam or what? Btw question-can I re-apply this wax again? Or really should wash away with for example fallout and then start again new layer? Tom
What do you suggest for clarifying the inside rear glass. It has the defroster material on it.
White scrub pad, bottle of water mixed with a little soap and glass cleaner.
Use microfiber towel and squeegee to dry.
Do you decontaminate the wiper blades?
Cleaning the wiper blades ? ..the logical answer is yes
I am curious, is your product water or alcohol based?
Would it be safe to use C4 or P4 instead on glass with that green pad?
can I do this once a month, or would that be too harsh in the long run on the window?
I may have etched my windshield with your water spot remover gel. Will the polish fix that?
Hey! Yes, machine polishing is the best option for removing stains and blemishes.
How the hell do you guys know to post the info I need exactly when I need it? Who hired you? Am I being watched?
Thanks so much for tuning in!!
Probably 😅
Can you share the make and model of the Gloves you use please?
is there any UV protection with the hydro products? I have been using Jet Seal on headlights for the UV protection but id like the ceramic action also. What are my options? Thanks
Hi there! Yes, adding the Hydro Line will resist harsh elements and UV rays using ceramic protection. HydroSlick is an excellent all around choice for repelling these elements and enhancing gloss.
after the correction, would you apply a water resistor?
Hey there! Yes, apply HydroSlick and/or HydroView to shield the surface.
Does this repair thousands of micro scratches and chips? My windshield looks like, well like I sprayed a fine mist on it when looking out from inside in sunlight. It's actually hard to see out of in direct sunlight, so I need a way to polish out all those little specks
I just do a dense wool pad and cerium oxide and that was more than enough to make water roll off by itself on my Sambar, and my Interceptor.
Will this work on homes and commercial glass?
Absolutely!
can you use it on the inside windsheild
Wow I only have to buy 200 dollars of your products to clean my glass? That sounds like a smart move to me. 😂
If you're broke just say that, I make $1,000 dollars a day.
Q. Can this process be applied to head lights?
Absolutely!!
Can you use this process on mirrors?
Been using your products for a while very happy with results ,when everything is dona properly and cheramic coating applied ,I dont even need to use my vipers when driving on highway ,all water just runs off , btw you have a clay cloath available? Thank you
Hi Roy! Check out our Clay Block for a clay bar alternative.
www.chemicalguys.com/clay-block-surface-cleaner/CLAY_BLOCK.html
Joey, great presentation.
Glad you enjoyed the video!
You guys have great products!
Glad to have you as part of the Chemical Guys family!
Hello, I plan on having my glass detailed. How long will the surface remain clean?
Detailed glass durability is not long, unless you also use glass coating
Can you apply your glass products on tint?
Tint is always applied to the interior of the glass and polishing it exteriorly would not create any more heat than your vehicle sitting outside in the sun.
What kind of car wash is a non ceramic, or I can apply with a sponge.
Can I do this on tint?
Man I love that acty I have and acty street and I actually want to do this same procedure
Happy detailing!!!
Does it work on tint
can this be done on exterior house or store front windows?
Is it glass?
I just got a brand new windshield. Which steps can I skip?
1 wash glass with dish soap
2 go over it with vinegar
3 use good quality wax
Job done save money and time
Glasweld has a fantastic glass treatment for residue as well as hard water spots, it's called pro clean, I offer it to my clients with their walk in showers as theres a ton of hard water in my area..
Do you clean the windshield with an IPA solution after polishing or no since it may streak?
I have had a windwo cleaning bes for 35 years now Jjust get some dawn dish soap really sudsy and you will never leave streaks again
Great video thanks guys. You guys are the Bob Ross of car paint. 🎨
🤩🤩
Please compare the glass at night from inside
We will make sure to make a video on that!
Am I the only one wasting time on trying to find that video promised 9 months ago?
Can u guys try on a glass that has watermarks. And do a close up. In this video that glass looks clean even before polishing
Hey! Check out this video.
ruclips.net/video/QYxvGYd2OtQ/видео.htmlsi=Uz7mS77blZPrcOL8
Exterior window cleaning is not that difficult. I have rarely seen any video or products from Chemical Guys for cleaning the windows from inside on tinted glass.
Cleaning windows from inside is as important as cleaning it from outside.
Hope you recommend a product and cleaning procedure.
Hi there! Thanks so much for your feedback. Check out this video.
ruclips.net/video/6WXCUVs95M8/видео.html
what do you use to remove acid rain on glass?
Love watching your videos. You guys are awesome.
Thanks so much for being part of the Chemical Guys family!
hi guys can i to get all 4 products for windshield and can you give me some detail and thank you
Great work, Joey. 💪🏾💪🏾💪🏾
Happy detailing!
I need to do this
Happy detailing!
OK, so I watched one of your videos and put a coating to protect the windshield. Problem is it leaves streaks. How do I totally strip a windshield and start over?
If you're still looking for a solution, their clean slate should do the trick. Or you can try diluted dawn dish soap
Much appreciated!
Happy detailing!!
What about the other side of the glass inside vehicle ?
Hey! Use Streak Free Glass Cleaner to remove haze and grime from the interior side of the glass.
www.chemicalguys.com/streak-free-window-clean/streak-free-window-clean.html
We have a lot of that car here in Japan D51 Suzuki carry 4 gear manual isn't?
Hey! This is a Honda Acty 😃
@@ChemicalGuys it should be 80's model then
great video
Happy detailing!
You guys up for a challenge to try and repair a sand damage windshield?
ngl the non-coated takes the cake
This man really just said a cool 70 degrees 😂😂😂 I don’t wanna know your hots then! For us 50 degrees is nice. 70 degrees you’re sweating your butt off 😂
😄
70 degrees Farenheit is considered perfect warm temperature. It's not cool or hot at all.
I used your heavy duty waterspot remover on my 2022 Chevy truck windshield and it left streaks that cannot be removed. It can not be washed off or buffed out! This product should be recalled. How do I fix this?!
Double down? Maybe it only removed streaks of the water spots?
What if your glass is pitted who this help out make it worse?
First time ,watching,awesome
Hey there, thanks so much for tuning in!
Don’t forget to clean the wiper blade
Great tip!
Great information and detail thank you....
Glad it was helpful!
At the end non coated is better
What Honda is this ?
Hey! This is a Honda Acty Truck.
I'm wondering if it will also work on my glass shower doors?
Absolutely!
Just get Stoner’s, $20 for glass cleaning is ridiculous and unnecessary…
I vape inside my car any way to restore the inside of my glass so it’s not foggy inside?
Voice crack ? 0:56?😂 sorryy still love vids 💪🏽
😄
If I have a ceramic coat on my vehicle, will using the clay bar remove any of that?
Hi there! Clay bar will not remove ceramic coatings.
@@ChemicalGuys awesome! Looking at kits now
Wouldn’t you want have used a iso wash?
I didn’t know you could polish glass
Absolutely!
Man never even mentioned the brand of glass cleaner he used
😂😂😂
Watch on 2x thank me later
Yea...
Need a location in New Jersey
Thanks so much for your suggestion!