How to Replace Engine Mount 2009-2019 Ford Flex
HTML-код
- Опубликовано: 20 июл 2024
- Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ia/1AEMT00459
This video shows you how to install a new engine mount on your 2009-2019 Ford Flex. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.
This process should be similar on the following vehicles:
2009 Ford Flex
2010 Ford Flex
2011 Ford Flex
2012 Ford Flex
2013 Ford Flex
2014 Ford Flex
2015 Ford Flex
2016 Ford Flex
2017 Ford Flex
2018 Ford Flex
2019 Ford Flex
Tools you will need:
• Pocket Screwdriver
• 10mm Socket 1aau.to/oa5V/1AXAA00017
• 15mm Socket 1aau.to/obpk/1AXAA00015
• 18mm Socket 1aau.to/oad6/1AXAA00043
• Needle nose pliers 1aau.to/oCn/1AXAA00051
• Needle nose pliers 1aau.to/oCn/1AXAA00052
• Ratchet 1aau.to/obwS/1AXAA00016
• Socket Extensions 1aau.to/obpk/1AXAA00015
• Torque Wrench 1aau.to/oaAJ/1AXAA00044
• Floor Jack 1aau.to/o2q/1AXAA00068
• Jack Stands 1aau.to/oRv/1AXAA00065
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
One of The best mount removal video I’ve seen so far. Great job my friend 👍
Excellently done video and instruction! Thank you!
I think most importantly the 3 threaded holes on the body need clesned out with a thread chaser or wire brush for a drill, because the dried loctite can make putting those bolts back in a lot harder than taking them out because itll seem like the hole is undersized but they just need cleaned out.
very detailed. thank you
No video for the other engine mounts?
+@russknight6211 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
Could this be what’s causing all of my torque steer?
Newbie question, why are we replacing motor mounts ?