How to Commission the NEW Vaillant Ecotec Plus Combination Boiler with it's New Touch Screen Display
HTML-код
- Опубликовано: 12 июн 2024
- This video is for "Installers" showing you the "New Vaillant Ecotec Plus Combination Boiler with it's all New Touch Screen Display". Unboxing, what's changed and what's new and of course "Commissioning the New Vaillant Ecotec Plus Combination Boiler ".
I'll show you how to run though the commissioning proses. Because there are some new parameters to be set or adjusted. But I will explain everything so you can commission the boiler with out any problems.
Hopefully I answer your questions so you have no unexpected surprises.
I really appreciate your support and a cup of coffee goes along way. Helping me to make more videos to help you
Any donation in my “TOOL BOX FUND” is amazing and really appreciated
www.paypal.com/donate/?cmd=_s...
Please click "THUMBS UP" and "SUBSCRIBE" if my video was useful to you. Click on the "BELL" if you would like a notification next time I upload a new help Video
"SHARE" me with your friends
Find MORE HELP on my Web Site, where all my videos are categorised to make them easy to find.
With links to products and parts I recommend
www.markballard-ltd.com
You can leave a message in the comments, your feed back is always appreciated, I will try to reply to as many as possible. Thank You
Chapters.
0:00 Commissioning the New Vaillant Ecotec Plus Combination Boiler Introduction
2:08 Unboxing the New Vaillant Ecotec Plus Boiler
3:06 On the Bottom of the New Vaillant Ecotec Plus Boiler
4:01 New insulation on the back of the New Vaillant Ecotec Plus Boiler
4:28 Installing the New Vaillant Ecotec Plus Combination Boiler
5:08 Wiring up the New Vaillant Ecotec Plus Combination Boiler
5:52 New ignition unit, gas Valve and ionisation probe on the Bottom of the New Vaillant Ecotec Plus Boiler
6:10 Condensation rubber connection on the Bottom of the New Vaillant Ecotec Plus Boiler
6:54 First switch on and commissioning the New Vaillant Ecotec Plus Combination Boiler
14:36 Menu for home owner on the New Vaillant Ecotec Plus Combination Boiler
14:56 Introducing Mark Ballard LTD
15:34 Continuing the menu for home owner on the New Vaillant Ecotec Plus Combination Boiler
18:11 Important information when setting heating temperature on the New Vaillant Ecotec Plus Combination Boiler
18:58 Setting hot water temperature on the New Vaillant Ecotec Plus Combination Boiler
19:21 How to turn ON & OFF Pre Heat on the New Vaillant Ecotec Plus Combination Boiler
20:43 Information Menu on the New Vaillant Ecotec Plus Boiler
21:22 Settings Menu on the New Vaillant Ecotec Plus Boiler
22:34 Installer Level on the New Vaillant Ecotec Plus Boiler
25:26 F 28, F29 How to reset the New Vaillant Ecotec Plus Boiler
More Help Videos
VIDEO: How to install, setup & adjust Vaillant's new built in timer with the "SensoRoom Pure" Room Thermostat
• How to Install Set Up ...
VIDEO: How to install, setup Vaillant's "MyVaillant Connect+SensoRoom" Wireless Thermostat and Smart APP
• How to Install MyVaill...
VIDEO: How to Find "DATA OVERVIEW" Menu. "QR SERVICE CODE" Amazingly Useful Vaillant ecoTEC Plus
• How to Find "DATA OVER...
VIDEO: Issues I found when installing the new Vaillant ecotec plus boiler
• New Vaillant Ecotec Pl...
VIDEO: How to Operate "Brand New Vaillant Ecotec combi boiler.
• How to Use the Vaillan...
VIDEO: A Presentation By Vaillant on their New Vaillant ecotec Plus Combination Boiler Range
• Presentation by Vailla...
Video: Easiest way to Add Inhibitor into a Vaillant Filter or Spirotech filter or Any Filter with a 3/4 Drain Point
• How to Add Inhibitor I...
VIDEO: How and Why you should add "INHIBITOR" to your heating system. Including "System Cleaner" and other "Chemicals"..
• How and Why You Should...
Video: How to Operate Previous Vaillant ecoTec Plus Combination Boiler
• How to Operate Your Va...
Video: How to Operate Your Vaillant ecoTec Pro Combination Boiler
• How to Operate Your Va...
Video: How to adjust set and turn on and off Vaillant 24 hour boiler timer
• How To Operate and Adj...
Video: How to Operate Honeywell T3R Programmer
• How to USE, Program & ...
VIDEO: How to Fix F75 on a Vaillant & Glow-Worm Boiler
• How to Fix F75 on a V...
VIDEO: A Presentation by Vaillant on their "Vaillant Heat Pumps".
• Presentation by Vailla...
VIDEO: How to Balance your Heating System to make it more efficient. Which will REDUCE YOUR GAS BILL.
• How to Balance Your He...
VIDEO: How To Remove a Olive, Five Different Ways To Remove a Old Olive Off a Pipe
• How To Remove a Olive,...
Recommended Tools
VIDEO: Einhell Classic TC VC1930S Wet & Dry Vacuum Review, 30L 1500watt
• Einhell Classic TC VC1...
LINK: Water Vacuum. I use this vacuum daily. Highly Recommended. www.markballard-ltd.com/recomm... (Amazon)
“As an Amazon Associate I earn from qualifying purchases”
Thank you for this, I couldn't figure out where the reset button was after I had my gas meter changed. Much appreiciated!
Thanks very good perfect
Nice one 👍
Many thanks Nice one
Hi Mark, Great very instructive video. I really enjoyed it. Small question. Can one use a timer function on the “home domestic water comfort function” (eg. from 07 am to 07 PM and then off) or do you have to change it manually in the app? Looking forward to your new videos.
Hi Mark, great video - thanks. I also bougt an ecoTec Plus a few weeks ago and when testing some things i put it into summer mode by pressing the heater button 3 seconds. My problem is that i use a Tado smart controller on the eBus instead of a Vaillant controller - Tado can not end the summer mode - will resetting the boiler to factory settings and configure it new based on the diagnostic infos end the summer mode on the boiler? And is there any risk when resetting to factory settings?
Great video Mark! I get all installs are different, but what kind of cost should people expect for installing this particular boiler?
Please help me I have a very simple control unit and my boiler won't heat the house up simply wont go over 18c⁰
Hi, Mark
Thanks for the info. I have a question. I have Vaillant Ecotec Plus system boiler plus unvented cylinder. When the boiler is on, the radiator is working but there is no hot water. I have tried the DHW (domestic hot water) setting on and off seperately, but still no hot water. Wondering what go wrong, thanks
With regards to filling, if you power up before filling it will enter purge mode whilst filling to clear air from the heat exchanger via the AAV. 👍🏻
Hello Mark,
Can I replace my old VRC470/4 controller with a newer controller? Do they all work with 24V ? Do I need an adapter plug for the newer controller? I have a VWL 85/2 A heating/cooling system. Thanks.
Hi Mark
having installed a couple of the new 625 models we have had problems with them stuck on low flame so will only reach around 53c
if we reset it will go to full flame and the next day it reverts back to low flame any idea's
Regards
Richard
Hi Mark, what is the fault code F.105 about please? It reads "Gas valve offset incorrectly set"
Please help 😬
Radiator mode has dash across it meaning it's off - how do you get it on ?
Is it the same price as its predecessor?
Would be great to see video of other Vaillant eBus controls such as the wiring centre for S Plan and Senso home thermostats, no one has put any up for some strange reason
Vaillant have some good tutorial videos for engineers, on their Advanced e-learning portal, which covers this
hello mister greetings from turkey i'm getting a vaillant ecotec plus f105 malfunction.could you please share information to solve the problem. thank you.have a nice day.
Weird things happening with out install (occurring as I type this) there is no option to set whether the boiler is using weather compensation, and under the diagnostic codes there is no option for 162, there is just 161 and 164. Tried a factory reset and nothing.
Hi, where can I find enter access code ? Thanks
How do you undo the test point in the gas valve
Alan key.
Did they just take the sensoComfort and integrate in into the boiler?
Sorry cant answered that as I've never liked the Vaillant controls so I've never used them before now
F57 eroare?
F57?
What is the access code
That code should be secret only for engineers to know
! N.100 please thanks
Be smart choose atag
The code is 17
They made an easy menu from past models into a tedious and long winded annoying one!
Best keep the installer number hidden. Customers love to play around with boiler settings then claim they didn't touch it.
I wont be walking my customers through that menu. Totally Agree. I've seen other videos showing the code, that's why I asked.
Hi there
In your opinion what’s the best boiler for a three bed detached house
With eight radiators
17 installer access code
Be smart, choose Viessmann
And wait weeks for parts, no thanks 😂