Building an Outdoor Pull-Up Bar | DIY Chin-Up Bar
HTML-код
- Опубликовано: 10 июл 2024
- Follow us on Instagram: / benjaminuyeda
Check out Fracture the sponsor for this video and print your photos on glass: fractureme.com/modern
This DIY Freestanding Outdoor Pull-Bar is made out of 2x6s and 2x4s with a 4-foot long 3/4" steel pipe for the pull up bar. This is an easy DIY fitness project that only requires a circular saw and drill to make.
For additional projects and information check out our website:
www.homemade-modern.com/ 
Хобби
We have done a few DIY fitness equipment projects. here is a playlist with them: ruclips.net/p/PL1hIfCnA2XemevYcMYaVWCgFbguQUp81_
pls do a tribute to the musicians workstation "platform" desk by output
HomeMadeModern hi would it be stable when doing a muscle up exercise? thanks
Hello there, I have built this following your video but I'm stuck as I do not know if I should buy a pipe with threaded endings as the pipe flanges are threaded, or should I sand down the inner thread on the flanges?
💪 Props for knocking out 10 pull ups.
If they're doing it correctly that is
Solid foundation both
Easy
@@eckysgaming why wouldn’t they be?
I built this yesterday. Used pressure treated so it could last outdoors and skipped the painting. I used 1 inch black pipe and a 1 3/8 spade bit to go through the wood then attached the flanges from the outside using 1/4 lag screws. The flanges do not reverse (face inward) so I had to make a countersink in the wood to accept a small raised area around the flange threads. I didn't have a larger spade bit so I used a palm router to make the lip. turned out great. I am going to add a short cross piece to each side of the "A" for easier transport and small cleats inside so my kids can step up to reach the bar. Great ,quick project, about $75 total and done in less than 90 minutes (with kids as helpers).
You will likely regret the black pipe, if not already. Better get galvanized.
took me 4 days showoff
Nice job, I've been thinking about building one of these. From my experience building swings and tree houses for my kids, I would also consider using some galvanized carriage bolds (maybe 5/16) to hold the main structure together (stronger than deck screws).
Love your design! I just made a DIY video for a heavy duty pullup bar for my apartment, but I really am liking this larger build!
I like the holes you drilled to hold the pipe, rather than floor flanges for it. You saved about $14 by using glue and screws to hold the bar securely.
Awesome job! I just built a modified version of this with a squat rack on the front! Had to move the front bottom support back 16 inches, then add a vertical support next to the front 2x6, which I am using to attach 2x4s to hold the barbell
I like the layered 2x4 to build the strong base, great simple solution.
Great video! Looking forward to seeing the pull-up off!
Awesome! The best DIY pull up bar! Simple and cheap...Thanks for sharing bro...
After seeing a lot of videos, this is the best one so far and it’s a two in one. I finished building a dip stand yesterday and will start making my squat rack today. I have plenty of wood I just need the bolts.All this is on account of the Covid-19.
I love the gym creations, I want to make my own home gym with this videos
Worked out perfectly. Thank you!
Nice! easy to build. Thanks for this video!
Such a cool idea. Love it! Inspiration 👌👍
Great work Ben!!
Thanks. Just used your design to build this for my 16 year old son. Quick and easy.
Hey man this turned out great but I thought it will be on your deck in your loft place. This backyard looks huge - a place to be filled with lots of projects
Awesome simple and effective design. Looks like you made sure it was really strong. A little tip to make the pull-up attachment even stronger. Those flanges will receive a lot of stress and torque, I've seen them worm their way out of the supports. So, drill through the support rails and attach the flanges on the outside with the stem inside the wood hole.
I think the the way you install the steel bar is not sturdy enough. Just 4 small screws go into the wood on each side? This is not going to last long. I recommend drilling two big holes on the wood and let the steel bar go all the way through them. Then, install two flanges on the outside to lock the bar in place.
I used screws on my bar and it's lasted 2 years now. Depends on the quality of the wood and how you care for it
4 small screws can hold a lot
Alternatively, why not have the vertical beams cross and lay the bar across the middle? No concern about screws failing, but less aesthetic perhaps
@@samuelcocar7109 good idea!
Those 8 screws can handle a heck of a lot more than 170 lbs
Fantastic! I wanna build one now
Great build
Cool build
Pretty cool brother!
Really Good job 😃👍
Would be much more helpful if all the info was in the bio for the amount of stock we need and measurements
Material @ Quantity
8 ft 2x6 @ 4
4 ft 2x4 @ 4
48.5 in 2x4 @ 2
54.5 in 2x4 @ 2
pipe flanges @ 2
4 ft metal pipe @ 1
box in 3 in screws @ 1
box of 3.5 in screws @ 1
Tools: Power saw, drill, marker, sawhorse (optional), paint (optiona)
*When I built it, I had to make a few adjustments different from the video. These are the materials I used. The angles of my A-frame were 62.7, 62.7, and 54.6
@@n0yn0y im am 5,9 do u think ill touch the ground if i hang on it ?
How’re you not able to figure it out yourself??
@@n0yn0y looks like $110 in parts.
@@n0yn0y hey dude, how high would you say the bar is?
You know, every time I see a new video from HomeMadeModern my soul does a little happy dance. Good project and you are not older, I am, but I make up for it by being really immature.
I can’t find it on the home made modern site
Thanks great video. I made a a pull up bar after seeing this video. Good stuff. God up.
Awesome i like this 👍👍👍👍
..I love this design...
Good job!)
The muscle up warning! He was reading my mind. Great video
Thang go hard ngl !
Thanks just built this in my backyard!
How is it holding up?
Nice job! I'm curious to see how this paint holds up outside. If you're anything like me, when I have something readily available, I'm not likely to use it...and that includes exercise.
Very nice. Though the bar placement seemed the weakest part by far on this build. I would have added little over 3" to the bar length and run it through the top of the A frame pieces and had it lock into the flanges on the outside. Far great weight capacity, not relying on screws. Subbed.
my last 2 brain cells trying to understand what the living hell ure talking about
+EpicESP You must not have had many to start with then if you can't understand basic English.
@@akalion213 TBH ain't dat basic
@@epicesp9204 That wasn't confusing. He's suggesting running the bar through the frame on each side and putting caps on the end to hold it in place.
This is stronger, but leaves little room for error when drilling holes for the bar. So unless it's done very carefully, the bar might end up not level.
Thanks legend!
I like this idea, I can place it at the corner of the driveway, it won't detract from the look of the yard, get a lot of use out of it and if I change my mind or want to upgrade, it's easily moved or even sold.
Gettin swole!
Good stuff
Excellent Thanks
Hahah so nice the way you move it
This is a great staring point. I’d put the bar through the woods though for better weight distribution and support. I’d also use wood glue in addition to the screws.
Brilliant
Are you guys going to upload the details of the build in a step by step manner onto your website ?
I like it.
this is awesome, thanks!
Add a few brackets on the bottom for plates and you have a overhead yoke walk too .
Made it!
Want this but with dip bars too
my backyard has a decent slope. Would you suggest to make one side of A-frame longer? I feel if I repeat your design, it could flip over.
I would wrap the bar with athletic tape. The paint on on the bar during high rep sets or when slick will become slippery and possibly cause your hands to rip. Grip tape or padded horse stall tape would help address the issue.
Gloves do the trick as well, besides the rain wont do the tape any good I think
OriginalCatfish it doesn’t rain too much in the desert😂
Great build! Would also be great in apartments too when landlord's don't want holes in the walls.
Great video. Great build.
Insha Allah I'm going to use this pattern to make mine only difference is I'm going to make my higher so I don't have to bend my legs when I do pullups. I like to dangle when I do pullups, I like for the bar to be so high that I have to jump to grab it. I can focus more on my pull and not on having my legs bent and thats what doing pullups is all about.
Great vid tho.
Being tall, I have to bend my legs at almost all street pull-up bars. It's such a good feeling to find a really high one and focus 100% on the pullups, like you said!
That said, if you have to jump to grab the bar, it won't be so easy to pick it up and move it (like in the video). Not an issue if you have a permanent place where it is going to stand.
This is cool.
How about a heavy bag frame for outdoors.
@@paulvollmer4215 I do plan on hitting it. It will flop over on its side.
Hi. What alternative can I do when I want to do muscle ups on this design if tying it to is not possible?
If Home Depot is open imma build this been slacking using Coronavirus and gym being closed as an excuse not to work out
Sounds legit
russell brass yea there’s two types of people the people who will slack on times like this and the other breed that surprisingly thrives in times like this.
me 2.. about to go to home depot to build one.. so sick of my gym being closed
tawdry existence I did it’s not as sturdy as the one in the video but it gets the job done
Andres 007 just built mine today.
Instead of 2x6s can you jist use use 2x4s all around?
Do you have a materials and tools list you can share? I searched your website and couldn't find this pull-up bar on it.
Could you attach to a 4 x 6 frame that is wider than the base and throw plates on it to add more weight/stability for kipping pull ups?
Also, how tall are you?
Does the bar rotate or do the end caps hold it in place?
about how much did it take to build?
Current cost for the wood, flanges, and 1-1/4" black pipe (not including screws, paint, or tax) is $113 at Home Depot. That's not bad for a solid outdoor rack. That said, Rogue offers a very nice above-door pull up bar for about $135 including shipping.
Is it possible to build this 10ft high with the same design?
Is it the same steps if you do it 6feets instead of 8?
So i made this about a year ago and i did it with a handsaw (works :)). Unfortunately i made a mistake during the process, so its now 2,60mtr high! Haha, my wife cant use it without a step and i need to jump quite high, but still.. Amazing tutorial!
Material @ Quantity
8 ft 2x6 @ 4
4 ft 2x4 @ 4
48.5 in 2x4 @ 2
54.5 in 2x4 @ 2
pipe flanges @ 2
4 ft metal pipe @ 1
box in 3 in screws @ 1
box of 3.5 in screws @ 1
Tools: Power saw, drill, marker, sawhorse (optional), paint (optiona)
*When I built it, I had to make a few adjustments different from the video. These are the materials I used. The angles of my A-frame were 62.7, 62.7, and 54.6
What type of wood did you use?
@@allylaird9605 just loblolly wood because it was cheap. You can't go wrong with any type of wood
How tall is it? (Only up to the bar)
Great as usual !!! who is the guy at 3:25 ? Mike?
*Corona virus sent me here*
MLG CZ/SK
Good for you. Corona is sending all of us to grave yard..
@@sultanheart Jesus is bringing me into eternal life! 😇😎
Forgiveness is available for all! 😇😎
Jeffrey Potter no need for Jesus ( peace be upon him ) .. i have Allah , the creator of Jesus , Mohammad , Muses and all creatures..
@@sultanheart you've been deceived. Muhammad was told to go to the people of "the Book". Muhammad was attacked by a demon and was encouraged by pagans that he was talked to by God. Islam is a made up religion promoted by Muhammad. This is the truth.
Jesus forgives sins. And cannot lie...
Allah... Is the greatest of all deceivers. Why trust this made up religion?
Jeffrey Potter please , worship what u want and let me worship what i want.. end of discussion ..
COVID-19 got me in a building mode
Can't get any wood though
Great home gym project, my girl wants me to build us one for our home so we can stay fit during the lockdown
Exactly what I'm doing this/next week, just need to wait for the wood to be delivered 😂
Awesome 👍, I'm just glad the home improvement store down the road from me is still open
do it!
So is outside of the bar tapped for it to screw into the flanges?
this white paint is glossy or matt or something else i mean anti slipping paint or normal?
I want to build this real bad, but I'm thinking of using bolts instead of nails to take down for the harsh wisconsin winters.
Don't use bolts anyway, just buy good screws such as grk, I would also consider using nails in some joints in this as this project requires shear strength resistance.
Will this be too short for someone who is 6' tall with long arms?
Hey, What is the thickness of the steel bar you used please?
How tall did your pull up bar actually come out to?
I love it, now I just need to build a wood deck. My ground is too mushy and soft without a proper base.
“Knocking out 10 was struggle city” lol
I wonder how to make it foldable so i can take it on the road for work
Try making a swing using the same desighn and yes im fourth comment
Planning to start building this tomorrow but I'll have to buy the wood. Excluding the bar is it true that I will need 4 2x6x8 and 5 2x4x8 assuming there are no mistakes?
You could do 3 2X4X8 and 1 2X4X10
How tall are you? Need to determine if 8' will work or if I should go with 10'. Im 6'2.
Hi. What’s the size of the boards in centimeters.
The physics in this structure is basic but beautiful
Nice job. I would rather use that rhino liner paint for the bar tho. It would add grip.
Nice build...but I would have drilled holes at the top of the uprights for the bar to protrude through and securde with the flanges on the outer face of the uprights for additional rigidity and strength. Otherwise it looks great.
Hi, I live in brazil... what kind of wood is this?
This build isn't on the website. Why not? Can you guys please post it.
Lol, because bros also need their DIY fix 😆.
But seriously cool simple build. 😉
Where to buy the bar
Bicycle handlebar wraps could be a nice upgrade.
Ryobi GANG! Way better than Milwaukee!
I'm gonna use an old swing set (childrens swing) and just put some timber around the base and spray it a cool colour
This doesn't look too hard, even for a girl like me. I might wanna try it!
I just made this for my boys and they love it. But it has a fair amount of sway near the top if they wiggle much (and they do). Any ideas to reinforce it?
I’d also like to know
Can u do muscle up on it?
If you were doubling the length of the bar to 8ft what extra reinforcement would you recommend
I think it wouldn't matter with regards to the wooden frame. The long bar will sag a lot more, though, so up the diameter and/or wall thickness of the bar itself.
It's for sale or not?
Nowadays, being first comment is most likeable ,and most important thing.