How to Replace Strut and Spring Assembly 2011-2019 Ford Fiesta

Поделиться
HTML-код
  • Опубликовано: 2 окт 2024
  • Buy Now!
    New Strut & Spring Assembly from 1AAuto.com 1aau.to/ib/1AST...
    This video shows you how to install a strut and spring assembly on your 2011-2019 Ford Fiesta. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
    This process should be similar on the following vehicles:
    2011 Ford Fiesta
    2012 Ford Fiesta
    2013 Ford Fiesta
    2014 Ford Fiesta
    2015 Ford Fiesta
    2016 Ford Fiesta
    2017 Ford Fiesta
    2018 Ford Fiesta
    2019 Ford Fiesta
    Tools you will need:
    • Pry Bar 1aau.to/ob/1AXA...
    • 15mm Wrench 1aau.to/ob/1AXA...
    • 10mm Socket 1aau.to/ob/1AXA...
    • 13mm Socket 1aau.to/ob/1AXA...
    • 15mm Socket 1aau.to/ob/1AXA...
    • 18mm Socket 1aau.to/ob/1AXA...
    • 3/8 Inch Air Impact Gun
    • T30 Bit 1aau.to/ob/1AXA...
    • Ratchet 1aau.to/oa/1AXA...
    • Torque Wrench 1aau.to/oa/1AXA...
    • Marker / Writing Utensil
    • Hammer 1aau.to/oa/1AXA...
    • Pick 1aau.to/ob/1AXA...
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 14

  • @TRQ
    @TRQ  2 года назад +2

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @soslimyohyea6874
    @soslimyohyea6874 Год назад +11

    Could have used a wrench instead of having to take all that stuff off uptop

    • @mlindholm
      @mlindholm Год назад +3

      For passenger side yes, on my Fiesta. Uses a 14mm wrench too.
      Drivers side has the chassis ground and brake reservoir bracket in the way, and one of it's bolts is indeed under the edge of the cowel.

  • @MarquisLewis-jk9lx
    @MarquisLewis-jk9lx Год назад +5

    👍🏽 I GREATLY enjoyed this step by step instruction video along with you stating every action and name of part and bolts etc! THANK YOU 😁 I learned something new with my car!

  • @keithdmaust1854
    @keithdmaust1854 Год назад +3

    Why have struts FAILED at 30,000 miles on 2016 Fiesta that has been totally babied??? Owned by my elderly mother.

  • @joeschneider8310
    @joeschneider8310 2 года назад +3

    More then helpful thank you for this video thank you.

  • @rapinncapin123
    @rapinncapin123 Год назад +2

    I can't get the arm back on...smh

  • @luktish
    @luktish 2 месяца назад

    Are the struts on driver and passenger side the same model?

  • @chadburkle1461
    @chadburkle1461 10 месяцев назад +1

    Is it going to get a wheel alignment after this?

  • @columbiariverdetailing1943
    @columbiariverdetailing1943 5 месяцев назад

    Is the CV axle on driver's side supposed to be supper stuff and not have any give

  • @Ridethelightning87571
    @Ridethelightning87571 Год назад +1

  • @Marco_Shouldve
    @Marco_Shouldve 2 года назад

    Would this be about the same on a late model year ford focus?

  • @rapinncapin123
    @rapinncapin123 Год назад

    T30 or a flat head for the head lamp removal.

  • @derekp6636
    @derekp6636 Год назад

    Are the back the same as the fronts?