Gonna grab a v3 for sure, got the build all planned up ! I loved the v2 and your video definitely makes the v3 shine. Plus I like Daniel too, he’s been very nice and helpful. On a side note, thumbs up for the oldschool kona poster !
Wicked rig !!! I love the power hobby tires. I've got the trail warriors, mud boss and the 52mm MT10 they are on my scx24 bronco. Perfect scale sized tire. They are such a slept on tire company.
Wow! That is definitely one of my favorite looking builds from you. Can't wait to get my long and Short wb from him. The performance looks top notch as well! Well done sir!
Heck, yeah interior with the driver some more scale accessories killer rig love it appreciate the video I’ll watch for the next one until then. Peace and chicken grease😁👍👍👋👋😎
The body is awesome, really stretched out for sure but without the body the build did great. Some lines were good with the body in place.,another awesome build Bro!!
Dude some of those lines were killer 🤙 Definitely thinking of building this chassis for my next build! Just finished my Athos swb build so it might be a bit lol
it looks sick with the body on... it's actually almost a shame that it crawls sooooooo much better with the body off...lol 10:35 should have been your thumbnail... ooooh... and suprise outro... 🤪👍
There's a little Pro tip check the top shaft in your transmission make sure you ain't got a bunch of spur wobble and then if you do what are you up some killer bearings transmission because simple fact is the specs for that transmission housing is so small that if each side is off by a little bit it causes that spur to wobble really bad and that will cause everything to bind up
Awesome looking body!! 🔥💯 Well........... it's definitely an xl wheelbase! 😝 You definitely need OD. That will definitely help putll you up and over better! 🤙🏾😎
That was a nice surprise, didn't think it would run that good with all the weight on top. Cardboard not heavy ( Unless it wet ).looks great streeking !
I had to throw a 3Flow9 brass hind flow to get enough weight on my mofo x15 front axle to counteract my rig's body balance issues. Might be worth a try on this one.
Outboard links triangulate the links providing more lateral stability. Ie: more side hill performance. In this case however, and a lot of other micro chassis’s, moving the links outboard gives you terrible anti squat properties. You can see this when your front end gets light while going up drunken frog even without a body. Ideally you’d want your rear uppers should be parallel to the ground at ride height. I prefer a good amount of A.S on these micros(rear upper link mounting higher than front)
That's freaking nuts bro I just started running the Power Hobby mud boss yesterday and they done phenomenal I'm not going to share my secrets of the answer but it kicks ass
Hmm I thought I had my chassis picked out but now that may change. Sounds like someone's finger nails going over a chalkboard.😂 I have a 10th scale rig that sounds like an old man getting out of bed.
They arent indestructible but if you use the chassis supports and don't over tighten everything it should be fairly stout. I've dropped mine plenty of times with no issues
Fairly new to micro crawlers scene. Want to do a scratch build and came across a chassis on Etsy from vengrc the gatekeeper. You think you can do a review on it? Love your content
The option for front battery mounting with forward facing motor is awesome. I could not get my Komodo and battery to fit right in the last version.
@@chadsmith6268 i'm sure it wont be doable with every setup, but stoked that mine worked!
That is a really cool 3-D printed body!!! and it performed surprisingly well with all that weight
Gonna grab a v3 for sure, got the build all planned up ! I loved the v2 and your video definitely makes the v3 shine. Plus I like Daniel too, he’s been very nice and helpful.
On a side note, thumbs up for the oldschool kona poster !
Karnage for another big win. Super thoughtful in his designs and this shows just how strong of a performer it is.
That’s a really cool rig!! I love the roof rack and the yellow headlights.
Wicked rig !!! I love the power hobby tires. I've got the trail warriors, mud boss and the 52mm MT10 they are on my scx24 bronco. Perfect scale sized tire. They are such a slept on tire company.
That performance is wild out of something that backtop heavy. That chassis is badass!
I'm watching this while waiting for the new drop of these! Those tires are squeaky!
Happy Tuesday Boys!
Joe you're on track for a raise if you continue being this quick
@@24Yepp
If Joe is any quicker, his missus will be disappointed.😜🤣
I hope you Legends enjoyed your Tuesday laugh.👍🏻
That rig is a beast without the body and looks good with it on. I like it, great video ✌🏽
Awesome build damn she long! Thanks for showing the frame. Pumped mine will be here this weekend!
Sure, is it great looking rig I like it👍👍
Wow! That is definitely one of my favorite looking builds from you. Can't wait to get my long and Short wb from him. The performance looks top notch as well! Well done sir!
Got 2 on the way and I’m sooooo stoked. This should hold me over till I’m back from California 🤙🏼
Those trail warriors are good tires. Powerhobby has quite a few good tires if you're curious
Liking the late 90's Kona banner!!!!!!
Heck, yeah interior with the driver some more scale accessories killer rig love it appreciate the video I’ll watch for the next one until then. Peace and chicken grease😁👍👍👋👋😎
There you go it made it up and over, looking awesome doing it , that body is super cool 👍👍
The body is awesome, really stretched out for sure but without the body the build did great. Some lines were good with the body in place.,another awesome build Bro!!
5:49 verrryy nice!!! 👍
That thing looks freaking sweet!!!
That was some sick side hilling 👍👍
Cool seeing his chassis evolve.
Maybe you should get a Land Rover Defender 130 body for that long ass chassis. 😉
Yes, it does. That body looks sweet. I like it.👍👍
👍👍 that looks pretty sweet dude am here watching 4:45 PM Tuesday, November 12
I grabbed that same chassis 🤘🏻love seeing what you did with it. Nice video as always, brotha.
That looks awesome!!! I got a body and also he painted it for me. He’s an awesome guy!!!!
Dude some of those lines were killer 🤙 Definitely thinking of building this chassis for my next build! Just finished my Athos swb build so it might be a bit lol
This rig is bad to the bone! Excellent driving as well dude 🤘
Love being able to see the smp at work. It's such a great motor.
Getting a driver to "hold" the pancake like a steering wheel would be the bestest thing ever.
Shoot for like a 20% overdrive and some more front brass and that thing will stomp fools!
Looks fookin killer!
I’m so excited for my karnage chassis
Always a pleasure to see your vidéos
Cheers from France ❤
it looks sick with the body on... it's actually almost a shame that it crawls sooooooo much better with the body off...lol
10:35 should have been your thumbnail...
ooooh... and suprise outro... 🤪👍
Very nice vidéo 👌👌👌
Thé body shell IS so beutiful.
Good way to spend a little time on Tuesday
There's a little Pro tip check the top shaft in your transmission make sure you ain't got a bunch of spur wobble and then if you do what are you up some killer bearings transmission because simple fact is the specs for that transmission housing is so small that if each side is off by a little bit it causes that spur to wobble really bad and that will cause everything to bind up
Awesome looking body!! 🔥💯
Well........... it's definitely an xl wheelbase! 😝
You definitely need OD. That will definitely help putll you up and over better! 🤙🏾😎
Yes! Forgot to mention that. OD for sure
That was a nice surprise, didn't think it would run that good with all the weight on top. Cardboard not heavy ( Unless it wet ).looks great streeking !
Yep 😎
That is a sweet rig 🤙
Great looking rig
Gota be one of the coolest trucks youve show to date . Needs some green rock lights to set it off 👍
PEACE !
I have some!! Karnage made me a set 😂
Excellent 👍
I would suggest that the lower rear links are too far separated at the chaise mount. Allowing for torque twist. Just a hunch
9:56 Siiiick!
Looks Awesome.
I had to throw a 3Flow9 brass hind flow to get enough weight on my mofo x15 front axle to counteract my rig's body balance issues. Might be worth a try on this one.
Good idea 👍🏻
Outboard links triangulate the links providing more lateral stability. Ie: more side hill performance. In this case however, and a lot of other micro chassis’s, moving the links outboard gives you terrible anti squat properties. You can see this when your front end gets light while going up drunken frog even without a body.
Ideally you’d want your rear uppers should be parallel to the ground at ride height. I prefer a good amount of A.S on these micros(rear upper link mounting higher than front)
Great info thank you
Very nice truck
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
That's freaking nuts bro I just started running the Power Hobby mud boss yesterday and they done phenomenal I'm not going to share my secrets of the answer but it kicks ass
Hmm I thought I had my chassis picked out but now that may change. Sounds like someone's finger nails going over a chalkboard.😂 I have a 10th scale rig that sounds like an old man getting out of bed.
Hahaha, just mute video and turn on some music
Nice!! Peace!!!🏴
What kind of bands are you running for limiting straps on your shocks?
So glad I'm not the only one whose rig sounds like it dying with almost no throttle input...
Those are some sick old fashioned steelie wheels. What are they?
Sweet
Mean you look like to me you have mass design links up front right
@@Gibsonlife573 Yeah mazz fronts
11:18 Remember that episode of SpongeBob where Mr Krabs gives him the rubber boots?
Hahahahhaha
What Esc did you pair up with the rop?
@@ThatboiHunner furitek
Oh no dude that link bar is gona suck. Especially on that long rig. Here we go....
waiting for these to be available. Just wondering, do these chassis handle abuse well? Great video as always sir.
They arent indestructible but if you use the chassis supports and don't over tighten everything it should be fairly stout. I've dropped mine plenty of times with no issues
@@24Yepp damn, now i have to order both lengths🤣
How long were the driveshafts you used?
Gladiator ones with little extensions
@24Yepp what do you mean little extentions?..like the male or female side?
@@HookedOnRocks336 amzn.to/3Z5IS0s
1st like, 1st comment! 🏆 ⭐️ Sup basket boys! I actually lied, I am 3 hours late. I hate when things like work and self care cut into my 24 time!
Fairly new to micro crawlers scene. Want to do a scratch build and came across a chassis on Etsy from vengrc the gatekeeper. You think you can do a review on it? Love your content
Yep! Vengrc stuff is good. My last video was actually a veng one
@ thanks for answering. Didn’t realize till after I wrote.
Wtf was that the smexy Trey outro😂😂😂😂
😏
It says the webpage I’m trying to find is not available on the Etsy link that you put
Fixed it, thanks
sick......noise
Would you say this is better than the cheat code when talking about pure performance?
@@Danielxperez14 cheatcode is more performance oriented with the agressive skid angle
@ alrighty thanks man, this one looks so sick but cheat code just restocks so idk I’m probably going to wait it out and dial in my current build
Scale NIOSES!
sup boys
pickle rig
Needs overdrive
Agreed
That is the most ridiculous sounding contraption I've ever heard 😅
Yeah... most of mine are.. 😂
"Naked lines"
WTF IT HAS INSTRUCTIONS!!!
Nice I really like the tent. Thanks for another great vid 24Yep 🫡
Hell ya, I’m gonna buy more v3s than you🫣😏
@@CrawlHub challenge accepted, I already bought 13
@ Dahm I’m a little behind (I havnt bought one yet)