Это видео недоступно.
Сожалеем об этом.
How To Modify ANY Semi Auto Nerf Flywheel Blaster || Semi Auto Rewire
HTML-код
- Опубликовано: 3 авг 2024
- THANKS FOR WATCHING!
In this video I show you how to overhaul ANY semi-auto flywheel Nerf blaster this tutorial can show you how to mod the:
- Rayven
- Stryfe
- Fearlessfire
- Demolisher
- Rapidred
- Barricade
- Stockade
- Zeus-mxv1200
- Hailfire
- Incisor
- Modulus ECS-10
- Cam ESC-12
- Desilator
- Captain Cassini Andor Blaster (Deluxe and Standard)
For the video I use the Nerf Rayven it’s very easy to understand and is an awesome blaster to mod.
All the parts used in this video and MORE! Can be found on the blastertech store, check them out below.
www.blastertech.com.au/
Wiring Diagram: drive.google.com/file/d/0B7AX...
Like my content? Subscribe! / @cobbabuilds
Or follow me on my social media:
Facebook: / cobbascustomnerf
Instagram: bang_cobba...
Music:
- Silky Thoughts and Peace of Mind - FortyThr33
- Sthlm Sunset - Ehrling
the fvj darts with the stock rayven are just sad
Shortz videos | Gaming and more! Flop, flop, flop, flop, flop..... goes 3 feet
I must admit, this is a really in depth mod guide (especially for the Rayven) Fantastic job!
Such an easy to follow tutorial. Thank you so much for this
awesome vid man i was confused for a little bit cause i set my flywheel cages in exact opposite like in every way but i guess it doesn't matter still awesome and comprehensive guide definitely the best iv'e seen shows all the little details a lot of modders skip over or put into a 20 minute documentary.
brendon arthur thank you man 👍🏼
8:55 I needed that tip so badly
love the keralis timelapse music in the background lol
By far the best guide I've seen on modding semi automatic blasters
Maybe make a video on tips for modders on a budget
thanks man really appreciate it, yes I have plans on doing similar videos. stay tuned.
COBBAcrazy it was a bit confusing on the connectors part
Can't really mod the stockade, has weird ass uncommon motors
You can always replace the cage altogether. buy an OFP cage, or salvage a cage from an old stryfe hypothetically.
Good vids,keepup the good works oneday your channel will get popular
Close your eyes at 9:38 😂
You will only get a blackeye
Great vid keep up the good work.
awesome guide! ive only got one flywheel spinning ideas?
Nice guide man!
thank you my friend
Fantastic stuff, are you planning to do a guide for automatics?
Hey, I did this with a stryfe and installed Cyclone flywheels. Now it takes about 10 seconds for the motors to stop. Tips?
naphen that’s usually what happens, you will have to add motor braking to stop it, but it will reduce the life of your motors
The cyclones are pretty heavy flywheels so after the motors turn off they take longer to spin down as the wheels hold more potential energy compared to stock wheels
Uhh isn't that good?
will this work on a belt fed fosm dart blaster that isnt nerf branded aswell?
Does the adventure force spectrum fall under the semi auto flywheel category that can be modded this way?
I like this guide
bro i shot water out my nose @ 9:35 - 9:40 i wasnt ready 🤣
thx for this vid
I hope this works for a dart zone tomahawk 60
What about the nerf smg e I heard the cage geometry is different but I'm not sure
This is a bit weird but I have something stuck in my fly wheel and I’m not sure how to get it out because it won’t shoot any darts
I followed this guide step by step and its still not running. I tried to use a 9v battery to test but nothing any tips?
is there a reason you close the shell without showing you put back the trigger plunger that pushes the projectiles ...
Hey thanks man! I don't have a lipo but this mod, will this still work with nimh battery? And can I use Fang 130 motors instead of rhino motors? Thanks in advance when replying!
Of course you can but you have to use 2s check foamblasts video
@@Cringemoment4045 alright thanks mate!
Is the better battery essential?
can you specify the micro switch you used please?
Great video 👌
Juan Andrade hope it helps 😊
Yeah it was very clear! I'm just getting into it with my son, this was very helpful thank you!
Woopsies, threw away my stock flywheel wheels. Any good replacement ones?
Is there any issue having the power Positive go to the motors and the negative to the micro switch? i asked MTB but no answer yet.
Dharmaboy I dont think so, the switch will still act as a circuit breaker so it should be okay. Question is why ?
Can I do this to the corner fire???
i ran 3 9v batteries trough a stock stryfe for 8 months. idk what you're on about
Do you have to use LiPo batteries? Or can you use 14500's?
You HAVE too. 14500 have low stall current and are dangerous
If you had a 3d printer would it be possible to just print a mount for the micro switch?
DisSum GudStufM8 yes definitely possible, nothing a printer cant do tbh.
Difference between fyg nerf darts and elite darts
On most semi auto nerf guns there is a circuit that will break the motors if different batteries are used
Yeah, but you aren't putting the thermistor back in are you?
It’s of parts that aren’t need all you need to do is bypass the volt restricter and then add higher volt battery’s I use 6 volts and 8 volts
Jake Libonati thats the old way of doing things, this is a proper guide for high performance
That's how you cold solder gees,
What if I made a nerf gun that shot like 5000 darts per seconds and shot 250 fps
In the end you only show fvj darts, are normal nerf darts still better when modded?
Yes but no
You should put the lipo in the stock
Does this work with the ghost ops evader?
Sure does, the evader is just newer than this video hahaha
how hard is this hitting
Make sure the hot glue doesn't make it's way into the internals of the switch! It sucks!!
Link to items???
What is the switch?
It's a 10 amp, good but not top tier
good Video, but it's pretty much the same as the one from MTB
My parents won't let me work with high powered batteries :(
I don’t have a solder!!
The battery is the problem
not fulling auto its just more powerful!
How much was this
80 including the lipo safety stuff
The soldering is unclear u should not jump cut on this because it is unclear for us inexperienced modders
Alex Martinez Search bar: soldering tutorial, thats how i learned.
I don't have a soldering iron or a dremel tool and my mum will never let me have one
Without an iron, you can't do rewires. But flush cutters and a hobby knife work instead of a dremel
Put some brushless motor in it 🤣😂
Me before: man this is going to be awesome!
Me after: NOPE
wow, this is gonna be complicated....
its really not, basic electricity
This dude has stretched the video to just barley over 10:00 by making you watch him repetitively fire the gun over and over again at the start. He’s only in it for the money.
You're not the clown or the circus you're the whole fair
Is it a problem if I use a 1500mah 11.1v battery pack?
If the amperage is more than 20A then go for it