Dude i love how professional your videos are! Also You should try doing a mod guide on a blaster that doesn’t have many guides on it. (Witch you probably already thought of)
Thank you it means a lot when people think my work is good. Professional is definitely a high rank considering I film on my desk after school with 2 desk lamps for lighting XD On the other mod guide note, i definitely intend to do this once i gain more experience. Honestly i am somewhat of a beginner myself at this point. But as for less known blasters i was thinking the clearshot? Not sure how well known it is i personally love it because the grip is super comfortable, and it can take a heavier spring so it can become a pretty powerful pistol. Let me know what you think. Is there another blaster you'd like to see me mod?
it was EXACTLY the same for me but i was born in 2006 and i was about 4 when i took apart this gun and did something to shoot WAY HARDER just to hurt my sisters and i found youtube in 2012 (6 years old) on my iphone 3 (it was my sisters “old phone” because she just got the “BRAND NEW” iphone 4) what good times back then. we lived in the projects and we were the ONLY white/hispanic family in the complex and all of my friends were black and let me tell you. everyone was so racist to me but at such a young age i didn’t understand what they meant, but looking back at it now i understand it all. 😂😂
Wish this was the video, that came up when I googled maverick mods. As a newbie I made some mistakes due to an older video telling me to stretch the spring 🤦♂️ You’ve earned my subscription!
An additional/alternative modification for this is to fill the dead-space of the reverse-plunger system. The stationary portion of the air-chamber is "dead-space", it provides an area for air-compression that does not contribute to dart-thrust, an issue eliminated (mostly) by direct-plunger systems. Fill this chamber with styrofoam or other material and let a bit extend out from the back to act as the plunger-padding (instead of trying to glue a pad inside the actual plunger). Then put a stiff tube/straw through the foam to allow air to pass unimpeded from the plunger itself to the rotating cylinder. Another trick is to run a continuous layer of electrical-tape around the back of the cylinder where air exits the plunger-chamber to the dart-chambers and punch holes in it where the cylinder-holes are. As you pull the trigger, the cylinder rotates at a slight distance from the air-port UNTIL the plunger is released at the same time as the dart-chamber is properly aligned, whereupon the plunger shoves the entire air-chamber forward against the back of the cylinder and SEALS against the tape as the air is discharged to launch the dart. This is just one more way to ensure a proper air-seal.
did all the mods great vid, I'm in Australia so instead of pennys i used 5c coins fits perfect (used 6 cause they look a little thinner) and also weighted the handle with a stack of taped up 20c coins (five down the bottom they just fit ). from a dumpster find to mod firing elite darts thank you kindly
The maverick doesnt have a cylinder aligned with the plunger as you prime, so i dont think there will be many problems with vaccum loading. You might have issues with the darts falling too far backing the barrel, though.
Thank you so much for this easy to follow guide been moding blasters for a bit but not the ubiquitous Mav funny enough. Mines having firing issues I may have put too much tape under the O-ring also think the rotation is hindered slightly by the plastic on top of the cylinder not being hammered in enough
I had this problem, for me it was that the ring was slipping at the catch, i fixed mine by removing one of the coins to reduce the pressure, and removing some of the lubricant that accumulated on the lower notch of the plunger, 3 years old comment but eh, might help someone in the future
okay, so i met with the same exact problem, the thing is, if your maverick is a little newer, maybe the lower pieces are glued to the rod, thats how mine were at least, honestly speaking, i tried to scrape off the glue, but to no avail, you just gotta do the "barrel falls over fully" part.
Aw man I followed lorddraconical's mod for this blaster and he didnt mention to add foam and I damaged my blaster and it broken it can prime and fire but it doesn't fire the dart
@@breakthebrain1835 dude no joke I am 18 years old I couldn't get it in so I go to my dad he looks at it 30 seconds later he is like " I fixed your thing" lol even after all these years he still fixes my stuff after I have busted it.
@@benjaminhurley1823 lol i know dads are like tech support as soon as you call them in you either embarass yourself when they fix it too easily or when you call them in and it works the moment they come in
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Dude i love how professional your videos are!
Also You should try doing a mod guide on a blaster that doesn’t have many guides on it. (Witch you probably already thought of)
Thank you it means a lot when people think my work is good. Professional is definitely a high rank considering I film on my desk after school with 2 desk lamps for lighting XD
On the other mod guide note, i definitely intend to do this once i gain more experience. Honestly i am somewhat of a beginner myself at this point. But as for less known blasters i was thinking the clearshot? Not sure how well known it is i personally love it because the grip is super comfortable, and it can take a heavier spring so it can become a pretty powerful pistol. Let me know what you think. Is there another blaster you'd like to see me mod?
Clearshot would be juicy!
Which*
@@QuandaleDingle5752 nah i was calling him a witch
Wish this video existed back when the maverick first came out I had to figure this all out on my own I didn't know what RUclips was until 2009
it was EXACTLY the same for me but i was born in 2006 and i was about 4 when i took apart this gun and did something to shoot WAY HARDER just to hurt my sisters and i found youtube in 2012 (6 years old) on my iphone 3 (it was my sisters “old phone” because she just got the “BRAND NEW” iphone 4) what good times back then. we lived in the projects and we were the ONLY white/hispanic family in the complex and all of my friends were black and let me tell you. everyone was so racist to me but at such a young age i didn’t understand what they meant, but looking back at it now i understand it all. 😂😂
Wish this was the video, that came up when I googled maverick mods. As a newbie I made some mistakes due to an older video telling me to stretch the spring 🤦♂️
You’ve earned my subscription!
An additional/alternative modification for this is to fill the dead-space of the reverse-plunger system. The stationary portion of the air-chamber is "dead-space", it provides an area for air-compression that does not contribute to dart-thrust, an issue eliminated (mostly) by direct-plunger systems. Fill this chamber with styrofoam or other material and let a bit extend out from the back to act as the plunger-padding (instead of trying to glue a pad inside the actual plunger). Then put a stiff tube/straw through the foam to allow air to pass unimpeded from the plunger itself to the rotating cylinder.
Another trick is to run a continuous layer of electrical-tape around the back of the cylinder where air exits the plunger-chamber to the dart-chambers and punch holes in it where the cylinder-holes are. As you pull the trigger, the cylinder rotates at a slight distance from the air-port UNTIL the plunger is released at the same time as the dart-chamber is properly aligned, whereupon the plunger shoves the entire air-chamber forward against the back of the cylinder and SEALS against the tape as the air is discharged to launch the dart. This is just one more way to ensure a proper air-seal.
did all the mods great vid, I'm in Australia so instead of pennys i used 5c coins fits perfect (used 6 cause they look a little thinner) and also weighted the handle with a stack of taped up 20c coins (five down the bottom they just fit ). from a dumpster find to mod firing elite darts thank you kindly
I just got into modding, wanted something simple and new the maverick was the way to go. Didnt want anything complex and this was AMAZING! thank you!
Amazing video! Will definitely do most of the mods except for the penny one and just buy a stronger spring instead
Very thorough tutorial that will enable me to attempt my first mod. Thank you
The maverick doesnt have a cylinder aligned with the plunger as you prime, so i dont think there will be many problems with vaccum loading. You might have issues with the darts falling too far backing the barrel, though.
Thank you so much for this easy to follow guide been moding blasters for a bit but not the ubiquitous Mav funny enough. Mines having firing issues I may have put too much tape under the O-ring also think the rotation is hindered slightly by the plastic on top of the cylinder not being hammered in enough
Very nice professional videos :)
Excelente amigo! Tal ves se puede cambiar resorte?
Beautiful, ty man
Good and helpful video
I’ve had the Maverick for a long time but if I prime the gun and release the primer at the click it would shoot the gun is it broken?
?
no, as long you have any added materials in the spring chamber that would compress the spring then that would be why.
I had this problem, for me it was that the ring was slipping at the catch, i fixed mine by removing one of the coins to reduce the pressure, and removing some of the lubricant that accumulated on the lower notch of the plunger, 3 years old comment but eh, might help someone in the future
I use different darts and would the penny change how hard the top prime thing is to pull back?
I know this is a old video, but can someone tell me if those mods work on similar/other nerf guns?
Thanks bro
Good for me I forgot how to put it back LOL
the rod thingy wont pry out for me :(
What should I do if when I pry the thing it doesn’t come off
Pry harder i guess
okay, so i met with the same exact problem, the thing is, if your maverick is a little newer, maybe the lower pieces are glued to the rod, thats how mine were at least, honestly speaking, i tried to scrape off the glue, but to no avail, you just gotta do the "barrel falls over fully" part.
this goddamn metal rod WONT BUDGE this thing is made out of some alien metal bro how tf do you do this
What is the same size as the tiny priming pin?
Aw man I followed lorddraconical's mod for this blaster and he didnt mention to add foam and I damaged my blaster and it broken it can prime and fire but it doesn't fire the dart
Inspect the plunger head, repair if possible, make sure that there is no leak due to a crack
I used a different foam, so will it break?
Dude I can't put the cylinder the way it is supposed to go
hey man, currently doing this mod, the issue you're having is you flipped the cylinder on the wrong side, making it impossible to fit, hope i helped
@@breakthebrain1835 dude no joke I am 18 years old I couldn't get it in so I go to my dad he looks at it 30 seconds later he is like " I fixed your thing" lol even after all these years he still fixes my stuff after I have busted it.
@@benjaminhurley1823 lol i know dads are like tech support as soon as you call them in you either embarass yourself when they fix it too easily or when you call them in and it works the moment they come in
Bruh don’t wanna break my screw driver
If its thick enough it should be fine. I was concerned at first too but those things are pretty strong lol