Nerf Stryfe LiPo Mod Guide

Поделиться
HTML-код
  • Опубликовано: 1 мар 2020
  • Hey, every channel needs their own stryfe mod guide right? In this episode of American Foam, I show you how to mod your stock Nerf Stryfe into a LiPo powered beast.
    Parts List:
    Motors:
    outofdarts.com/collections/mo...
    Flywheels:
    outofdarts.com/collections/fl...
    Cage:
    outofdarts.com/collections/fl...
    Wire:
    outofdarts.com/collections/el...
    Switch:
    outofdarts.com/collections/el...
    XT60 Connector:
    outofdarts.com/collections/el...
    Voltmeter:
    outofdarts.com/collections/el...
    Battery Cover:
    outofdarts.com/collections/3d...
    #nerf #nerfmod #nerfstryfemod
  • РазвлеченияРазвлечения

Комментарии • 188

  • @AmericanFoam
    @AmericanFoam  4 года назад +49

    00:18:49 Chrony Data + Firing Demo

    • @lukesloan8066
      @lukesloan8066 4 года назад +4

      Do you mind giving a link for the battery you used? I know you said that it's a 3s LiPo, but you never listed the discharge rate-

    • @Reg101st
      @Reg101st 3 года назад +2

      Here too, needed a recommendation for minimum discharge rate for battery in a 2/3S lipo. Comment from anyone is welcomed.

    • @VGhosty288
      @VGhosty288 2 года назад

      is there anyway I can make it like 110 fps?

  • @epico5805
    @epico5805 3 года назад +122

    Step one: accumulate a sufficient amount of money to afford parts

    • @AmericanFoam
      @AmericanFoam  3 года назад +29

      The struggle of a nerf modder. It’s real.

    • @Lugemcazel
      @Lugemcazel 3 года назад +3

      Dude yes im saving for components too

    • @jacksonez
      @jacksonez 3 года назад +11

      Step two: learn how to solder.

    • @FoamFlingingHS
      @FoamFlingingHS 3 года назад +2

      @@jacksonez uh huh thats all i need to figure out

    • @voidmobile094
      @voidmobile094 Год назад

      actually its like 65$ not too much

  • @jacksonez
    @jacksonez 3 года назад +21

    There has never been a more accurate depiction of the phrase “ Ferb, I know what we’re gonna do today”

  • @fooshi6514
    @fooshi6514 3 года назад +32

    Tried this with the default rev switch...
    the fireworks were nice

  • @clone734
    @clone734 3 года назад +21

    This is honestly one of the best mod guides for the stryfe on RUclips.

  • @JimmyDean59
    @JimmyDean59 4 года назад +31

    “Mediocre hunk of plastic” it’s the most competitive blaster in stock only wars.

    • @AmericanFoam
      @AmericanFoam  4 года назад +22

      If you’re not including rival. Also, some of the stock dart zone and buzzbee stuff smokes nerf brand blasters in stock form. The dz savage spin gets 100 FPS just on aa’s and holds 45 rounds and only costs $30.

    • @leafrn7059
      @leafrn7059 3 года назад +1

      The dart zone aeon can shoot 130 fps unmodded, so the stryfe is outdated, but its great still because of the ease of modding.

    • @JimmyDean59
      @JimmyDean59 3 года назад

      @@leafrn7059 True, but in CQB if you miss you have to prime it again, and it’s pretty heavy to prime for a stock blaster. The Stryfe does have better rate of fire.
      I’d take a Specter instead of a Stryfe now, though.

    • @floater7082
      @floater7082 3 года назад +2

      @@JimmyDean59 You mean a spectrum?

    • @user-oz2jn4yh2e
      @user-oz2jn4yh2e 24 дня назад

      @@AmericanFoamI use “stock” I just short the cap instead of removing the board.

  • @CoolStuffOrigami
    @CoolStuffOrigami 3 года назад +24

    You are so underrated. You should have around a million subs already

    • @cavanmorber3238
      @cavanmorber3238 3 года назад +9

      I agree. He makes quality content but is not really recognized...

  • @rob010976
    @rob010976 4 года назад +27

    Good job on the mod guide. My son and I have mod’d many different Stryfe and reskin. This video is easy for those who haven’t mod’d a simple flywheel blaster to follow along. It’s important as you alluded to the FPS all depends on the motors selected with the crush of the flywheel cage. My son has a 3s Stryfe with Krakens that we only are able to use at Atomic or BTA games because it hits 175-180 FPS consistently. Good job!

    • @thomasrenelli
      @thomasrenelli 4 года назад +2

      damn sounds like an awesome blaster! What flywheels and cage are you using?

    • @rob010976
      @rob010976 4 года назад +2

      It has those same cyclone flywheels but the cage is a morpheus with the metal dart guide/barrel segment.

    • @TribitFanOpex
      @TribitFanOpex 2 года назад

      @@rob010976 you should make videos about the stryfes and the reskins

  • @wess750
    @wess750 4 года назад +2

    Thanks for the guide. It was very straightforward and very well-explained without becoming overly technical.

  • @crummyautumn
    @crummyautumn 4 года назад +3

    Literally just got into this. Gonna use this guide. Great video, pace and explanation

  • @FortyTwoBlades
    @FortyTwoBlades 4 года назад +5

    Nice touch with the Flyte magazine.

  • @howeslife44
    @howeslife44 4 года назад +4

    That’s pretty BA! One of these days I need to come watch you do one of these mods it’s impressive. So much of it sounds like a foreign language to me.

  • @ericbing8636
    @ericbing8636 4 года назад +2

    Great tutorial! Much needed. Thanks!

  • @zaka0781
    @zaka0781 4 года назад +3

    Great tutorial! Gotta try it on my own! Thanks!

  • @Ch33seYT
    @Ch33seYT 5 месяцев назад

    Thanks for the guide for my first ever lipo mod! it works great!

  • @collindewitt8296
    @collindewitt8296 3 года назад +10

    Great guide and it will help me, a previous collector who just got back into the hobby, to mod my first flywheel. Though I do have one question, and that’s what lipo are you using? I couldn’t find it in the description.

  • @WylunCustoms
    @WylunCustoms Год назад

    does it matter if its the Positive or Negative wire that goes to the trigger switch? I notice you did the negative wire, but in other mod tutorials, i've seen people do the positive.. thanks in advance!

  • @squid2k0
    @squid2k0 3 года назад +1

    BEST MOD GUIDE EVER!!!!!!

  • @lucasvasilev8364
    @lucasvasilev8364 3 года назад +6

    This.
    is the best nerf stryfe mod video I've ever seen
    I love you
    no homo

  • @TungstenEXE
    @TungstenEXE 4 года назад +10

    Long live the stryfe! I love the stryfe! RS too :)

  • @bentstrider
    @bentstrider 2 года назад +1

    Picked up one of these Stryfes at a thrift store for a buck. The battery compartment and presumably other electric components were water-damaged/rusted due to possibly being left outside. Was looking for a basic, re-wiring/repair. But this mod seems to be the better way to go.

    • @Wuqz
      @Wuqz 2 года назад +1

      Great find.. they're hard to come by now and going for like $50 on Ebay.. I just picked one up from FB market with a spare mag and darts for $15.

    • @bentstrider
      @bentstrider 2 года назад

      @@Wuqz Damn. Didn't know that. Of course this was back in I think September or so. I was looking for something to rebuild into a cosplay item for The Walking Dead "Commonwealth" outfit I'm putting together. This was one of those small town, church-affiliated thrift stores in Clayton NM. Always a treasure trove when going through those places.

  • @MJRookieForge
    @MJRookieForge 3 года назад

    Do you think this might work for the new MA40? Or will you be posting a new guide for that?

  • @JakeSymeVlogs
    @JakeSymeVlogs 2 года назад

    This is the best mod guide thanks bro
    Mine likes to melt the accufake tips but elite darts are good anything I should do there? Other than that the things a beast

  • @kortag
    @kortag 4 года назад +1

    Great video! Flywheelers are something I don't mess with and the Stryfe is gonna be my first. Best mod video I've seen on it! Question, any advice for short darts? Looking for the right flywheel and crush to get around 130 fps.

    • @kortag
      @kortag 4 года назад

      Meaning recommendations on said flywheels and short dart pusher.

    • @kartssource5467
      @kartssource5467 4 года назад

      Check out www.outofdarts.com Go into the blog section and open the Stryfe mod guide. Luke from OOD has a one click add to cart list that will upgrade a stock Stryfe to shoot about 150 FPS with full length darts! Which to me is a win as full lengths are cheap, plentiful, and easy to scavenge on the battlefield.

    • @Cringemoment4045
      @Cringemoment4045 4 года назад

      Bro get 43 mm cage, cyclones and valks

  • @eggynub1096
    @eggynub1096 2 года назад +1

    Hey american foam i just subscribe. and one question do i really need to change my flywheel cage or not?

    • @AmericanFoam
      @AmericanFoam  2 года назад +1

      The stock cage is very cheap and not sturdy enough to handle the torque from the new motors and wheels. It will work but not very well.

  • @DaikaijuProductions
    @DaikaijuProductions 4 года назад

    Is it possible to use electrically conductive glue instead of soldering? Or would that not work in the blaster?

  • @iangarforth
    @iangarforth 4 года назад

    Really useful. Will be doing this to my Stryfe. One question - does it need a fuse?

  • @johnathanm1273
    @johnathanm1273 3 года назад +1

    Is the which battery cover is the one needed to fit the lipo? The small or large?

  • @yournumberonepal
    @yournumberonepal 3 года назад +4

    I've wondered how to manage low voltage on the lipo so you don't run it too long.

  • @stephenshelton1822
    @stephenshelton1822 2 года назад

    Quick question, why did you use a 3s lipo? Could you have used a 2s for this build? Thanks! This video is awesome btw! Thanks for putting in the time for the hobby.

    • @Kool_Kid8131
      @Kool_Kid8131 5 месяцев назад +1

      The motors were made for 3s lipo

  • @lemonturtlefpv8053
    @lemonturtlefpv8053 Год назад

    Wow this video is amazing so detailed. Can't wait to try this.
    Does anyone have a link for the flywheel cage. An STL file would be even better

  • @abysforyoucraftsreviews8093
    @abysforyoucraftsreviews8093 3 года назад +6

    nice work bro try to make a fully automatic stryfe mod

    • @AmericanFoam
      @AmericanFoam  3 года назад +3

      I have the parts for that at home! Gonna do that video soon.

  • @voidnerfing5072
    @voidnerfing5072 3 года назад +2

    Great mod guide, however next time please zoom in on what your working on more, that way I can see more detail. Thank you!

  • @fatboyshadetree5139
    @fatboyshadetree5139 9 месяцев назад +1

    I know this is an old video but what battery did you use? Unless i missed it in the parts list.

  • @kofeblok6187
    @kofeblok6187 3 года назад +1

    Which battery is best for my neo-hellcats (180)? I mean the better version which is a bit overkill. And i want to use the whole Power of these engines. How do i know which is good?

  • @bezelyesevenordek
    @bezelyesevenordek Год назад

    that was cool

  • @iancabruhvideos3211
    @iancabruhvideos3211 3 года назад +3

    Hey American foam is there a way you can mod my stryfe for me? I have the kit I can just send it to you?

  • @Atlantic_dummie
    @Atlantic_dummie 3 года назад +5

    you know, modding a springer might be better.
    for my wallet, my ears and peoples skin
    great video! this really helped!

  • @Yehboidanny
    @Yehboidanny 2 года назад

    Did the motor screws come with the flywheel cage

  • @_mathew_2850
    @_mathew_2850 4 года назад +2

    can you please show us how to mod the nerf stockade because i want it to shoot harder.

  • @sleepingbagmanstudios489
    @sleepingbagmanstudios489 4 года назад +3

    What crush on fly wheel cages do you recommend?

    • @AmericanFoam
      @AmericanFoam  4 года назад +1

      42.5 mm is a a good midrange cage spacing. Fang revamped motors and cyclone wheels is a good setup. Not the highest FPS but won’t destroy darts either.

  • @karmnyasehgal6439
    @karmnyasehgal6439 3 года назад

    Can you do a full mod guide with the worker full auto kit for the stryfe

  • @maximk.3194
    @maximk.3194 4 года назад

    What battery did you use??? I'm trying this myself and have no idea of what batteries you used.

    • @Cringemoment4045
      @Cringemoment4045 4 года назад

      3s lipo. It's a turnigy nano tech 1400mah 30c 3s lipo

  • @VelvetLynx11
    @VelvetLynx11 Год назад

    Question. what would i have to do if i was using a 2S battery? would i still need to use a extended battery cover? only because i want to make a sort off sleeper styfe. as i will also be using the Full auto convert from Worker aswell. i dont really want to remove what i dont have to. So if u could Please let me know on what i would have to posably have to remove or change from ur video that would be greatly apreshiated.

  • @exloadingfission3368
    @exloadingfission3368 3 года назад

    Can I upgrade my flywheels but not the cage? Also can I use imr instead of lipo

  • @tapecreationsstudio9574
    @tapecreationsstudio9574 3 года назад +1

    what lipo battery did you use

  • @finteriele4338
    @finteriele4338 3 года назад

    what size battery cover do you recommend?

  • @penghsu8660
    @penghsu8660 3 года назад

    I have a 42.5mm cage but the gap is too small for darts to pass through. Is it because the flywheel diameter is too big or the regular darts are too big?

    • @AmericanFoam
      @AmericanFoam  3 года назад

      I run that gap on my mods. It has no problem with regular darts. It will not accept FVJ (hard tipped darts) though. Those are dangerous anyway. Otherwise it should be just fine with any normal dart.

  • @Dhsbsnskd
    @Dhsbsnskd 3 года назад +2

    Wait how many volts would that lipo be?? Thanks!

    • @AmericanFoam
      @AmericanFoam  3 года назад

      All 3s lipos are 12.6 volts, but this one is a turnigy nano tech 1300mAh 45~90c discharge

  • @templetwinsmum2476
    @templetwinsmum2476 4 месяца назад

    What lipo did you use please?

  • @Tigoros136
    @Tigoros136 Год назад +1

    How do I add a select fire kit in here?

  • @thecursedgamer2400
    @thecursedgamer2400 Год назад

    What Lopo battery do you use

  • @madcuzoflag8946
    @madcuzoflag8946 3 месяца назад

    what spacing is recommended?

  • @gewoonrudo3386
    @gewoonrudo3386 4 года назад

    Wich wire dozen do you have and what is the dozen of your flywheelcage?

    • @Cringemoment4045
      @Cringemoment4045 4 года назад

      Check description
      Wire is 18 awg stranded silicone wire

  • @ryleydecosta3595
    @ryleydecosta3595 2 года назад

    What battery did you use

  • @Mozzarella-ko5sd
    @Mozzarella-ko5sd Год назад

    Does it matter what flywheels you use

  • @edgarflores5047
    @edgarflores5047 3 года назад

    What flywheel cage do you guys recommend from out of darts

    • @AmericanFoam
      @AmericanFoam  3 года назад

      OFP Gen 2 42mm crush. There’s a lot of options out there, but this one is all around good.

  • @mlpboi3862
    @mlpboi3862 10 месяцев назад +1

    Who’s here after the Stryfe X was announced?

  • @anythingwithwheels08
    @anythingwithwheels08 2 года назад

    What battery do you run

  • @Sparroh
    @Sparroh 11 месяцев назад

    Is it possible to put an extended pusher to use short darts?

    • @AmericanFoam
      @AmericanFoam  11 месяцев назад

      Absolutely. A lot of mod shops have simple drop in replacement pushers for that.

  • @sweatyylemonss5237
    @sweatyylemonss5237 5 месяцев назад

    did you use loctite at all?

  • @haakfamily1249
    @haakfamily1249 2 года назад

    I honestly feel bad for this guy’s neighbors lol

  • @emil3890
    @emil3890 4 года назад +3

    Can i use other flywheels (worker)

    • @AmericanFoam
      @AmericanFoam  4 года назад

      Sure. Different wheels yield different results, but they all should fit pretty much.

  • @implied1006
    @implied1006 2 года назад

    how hard does this hurt if it is used in a nerf war?

  • @masteredmello1959
    @masteredmello1959 7 месяцев назад

    wouldnt you need to solder the positive wire to the switch instead? like so it wont bring any current to the motors when we are not using it.

    • @AmericanFoam
      @AmericanFoam  7 месяцев назад

      It doesn’t matter in a simple circuit like this one. When the circuit is open no electricity flows.

    • @masteredmello1959
      @masteredmello1959 7 месяцев назад

      @@AmericanFoamoh! i didnt know that. i am kind of new at modding, i will buy a stryfe for christmas and the out of dart 3s lipo entry level mod kit to make my first stryfe mod. thanks for the tutorial btw

  • @BeardedJibaro
    @BeardedJibaro 2 года назад

    Does that one go full auto?

  • @alicemurray2798
    @alicemurray2798 3 года назад

    Does the way you wired it add motor breaking?

  • @curtisfoster8291
    @curtisfoster8291 4 года назад

    I'm gonna run valkyries with smooth wheels on 3s any tips?

    • @Cringemoment4045
      @Cringemoment4045 4 года назад

      Cage you use will depend on performance. Also if you are using 41.5 switch to krakens

  • @MidnightBlasters
    @MidnightBlasters Год назад

    Where did you get that voltmeter from?

  • @VargaZsolt-ix7dk
    @VargaZsolt-ix7dk Год назад

    how big your cage was

  • @alexanderwolf4941
    @alexanderwolf4941 2 года назад

    Do u remove the locks I. This vid

  • @hri6302
    @hri6302 2 года назад

    what lipo did he use

  • @barryroberts3657
    @barryroberts3657 2 года назад

    Where can I get the battery??

  • @goofyahhtoetickler8645
    @goofyahhtoetickler8645 2 года назад

    I know this is late but what size or cage is needed ???

    • @AmericanFoam
      @AmericanFoam  2 года назад

      Stryfe cages usually vary from 42mm to 43.5mm. The smaller ones have higher FPS but usually need better motors as well. 42.5mm cage plus Fang Revamped motors are a good combo.

  • @HF_Tripp
    @HF_Tripp 4 года назад

    what battery did you use?

  • @mohamadbadrudin6832
    @mohamadbadrudin6832 8 месяцев назад

    Hi just want to ask can i just change only the motor without change anything else like changing remote control car

    • @AmericanFoam
      @AmericanFoam  8 месяцев назад

      No. It’s definitely everything or nothing for the most part in nerf electrical mods. The electrical demands of the motors way outclass the capabilities of the stock switches, wires, and batteries.

    • @mohamadbadrudin6832
      @mohamadbadrudin6832 8 месяцев назад

      @@AmericanFoam oooo

  • @roartsthe3rd328
    @roartsthe3rd328 4 года назад

    What size flywheel cage is that i need to know what size you bought

    • @usmankashif742
      @usmankashif742 4 года назад

      Depends on what level your on I recommend 2.5

    • @Cringemoment4045
      @Cringemoment4045 4 года назад

      Ofp Morpheus, 3d printed any crush but I'm pretty sure that's 42.5mm

  • @jaffarzaidi3451
    @jaffarzaidi3451 4 года назад

    Without modifications can we use lipo 7.4volt rechargeable battery in Nerf infinus instead of 6volts (1.5v 4D size batteries) and max how much volts we can increase in standard Infinus nerf gun? Would it will be safe for gun?

  • @Meme_monkey73
    @Meme_monkey73 Месяц назад

    Does anyone know how to fix a short circuit I had a short circuit in my modified stryfe please help🙏

  • @maximk.3194
    @maximk.3194 4 года назад +1

    how many volts does the battery have?

  • @cheffrog7485
    @cheffrog7485 Год назад +1

    Does anyone know what size wire I would need

    • @AmericanFoam
      @AmericanFoam  Год назад

      16 awg is enough to handle a high powered stryfe mod.

  • @finteriele4338
    @finteriele4338 3 года назад

    can one use the stock flywheels?

    • @AmericanFoam
      @AmericanFoam  3 года назад

      You can. The performance won’t be as good as if you upgraded them though. But if you’re on a budget you can always do that later.

  • @logslayer1269
    @logslayer1269 3 года назад +3

    Does this work for a blue stryfe?

    • @AmericanFoam
      @AmericanFoam  3 года назад +1

      Yes. All five stryfe variants are the same inside.

    • @logslayer1269
      @logslayer1269 3 года назад +2

      Thank you I will definitely be doing this with my stryfe

  • @pogaming3393
    @pogaming3393 3 года назад +1

    WHat type of lipo was used?

  • @asenovbruh8575
    @asenovbruh8575 3 года назад

    Hey,bro. Can I leave the stock motors and just use the lipo?

    • @AmericanFoam
      @AmericanFoam  3 года назад

      No. It’ll burn them out in pretty short order. The stock motors switches and wires all need replaced with that high current.

    • @ilovebagels6943
      @ilovebagels6943 3 года назад

      You can use 3 IMRS and a dummy battery tho

  • @itsalez1435
    @itsalez1435 3 года назад +1

    Does this work with a modulus strife?

  • @dylandosh
    @dylandosh 2 года назад

    How did u learn how to soder

    • @AmericanFoam
      @AmericanFoam  2 года назад +1

      Watching the MakeTestBattle Super Stryfe video. It’s an outdated mod guide now but it’s got a lot of good info including great close ups of the soldering process.

  • @Roogalt
    @Roogalt 2 года назад

    American foam
    "A centimeter"

  • @sigveeidstedvardsen9511
    @sigveeidstedvardsen9511 3 года назад

    What does it mean when you “upgrade” the flywheels?

    • @AmericanFoam
      @AmericanFoam  3 года назад

      There are aftermarket flywheels available from a lot of different hobby shops like Containment Crew, FoamBlast, Out of Darts, etc. each has pros and con depending on which motors and flywheel cage you combine them with. It seems like a lot to grasp at first but it’s pretty simple. I usually go with Cyclone wheels from containment crew, fang revamped motors, and a 42.5mm crush flywheel cage when I’m modding my own Stryfes.

    • @AmericanFoam
      @AmericanFoam  3 года назад

      I may make a video on this topic in the near future as well.

    • @sigveeidstedvardsen9511
      @sigveeidstedvardsen9511 3 года назад

      American Foam 😊

  • @freshwaffles1749
    @freshwaffles1749 3 года назад

    what size of cage do I get

    • @AmericanFoam
      @AmericanFoam  3 года назад

      Whichever one you want. The smaller the crush the more FPS you get generally.

  • @epico5805
    @epico5805 3 года назад

    Then factor in another 60 bucks for both the charge and battery

  • @dastealthoperator4138
    @dastealthoperator4138 3 года назад

    How much does this even all cost?

    • @AmericanFoam
      @AmericanFoam  3 года назад

      It really depends on how in depth you want to get with some mods and what game types you want to play in. Some motors are cheap but lower powered some cages give you more accuracy. You could probably get away with $50 or less in parts but you’ll still need a battery and charger for it. That is going to be about another $50, but it’ll last you years and you’ll never need to buy alkaline batteries ever again. So you end up saving on battery costs over time.

  • @juliotabamo1898
    @juliotabamo1898 4 года назад

    What flywheel and flywheel cages do you reccomend for the rapidstrike?

  • @Ghostrider-jg7nu
    @Ghostrider-jg7nu Год назад

    Yo if anyone can give me a good lipo batter brand name and what it’s called because I got no idea what lipo to use

    • @BreezyE.
      @BreezyE. Год назад

      Really depends on what motors you’re using.

  • @Guvnorjor
    @Guvnorjor 4 года назад +1

    How much did it cost

    • @Cringemoment4045
      @Cringemoment4045 4 года назад

      Builds like these should cost about $60. My build costs about $130

    • @Alice-zx7ib
      @Alice-zx7ib 3 года назад

      I personally added up all of the things in the description, and then tacked in another $30 2s LIPO, so around $120

    • @Cringemoment4045
      @Cringemoment4045 3 года назад

      @@Alice-zx7ib I never really add lipo costs that's why my build looked cheaper

  • @infinitypat-brawlstars9452
    @infinitypat-brawlstars9452 4 года назад

    Can I also use fang motors

    • @AmericanFoam
      @AmericanFoam  4 года назад

      Yes

    • @Cringemoment4045
      @Cringemoment4045 4 года назад

      @@AmericanFoam but he has to cut shell

    • @Cringemoment4045
      @Cringemoment4045 3 года назад

      @COACHTURTLE 9124 no fangs are 132

    • @AmericanFoam
      @AmericanFoam  3 года назад

      The original fang motors are 132 though I don’t know anyone that sells those anymore.

  • @corn789
    @corn789 3 года назад

    Why dosent mine work

  • @corn789
    @corn789 3 года назад +1

    It Only fires if mag in and the bullet gets stuck or dosent go fast

  • @Gameup2332
    @Gameup2332 2 года назад +1

    i thought this was mor then a hundrund$ but it like 30

    • @Gameup2332
      @Gameup2332 2 года назад

      also what type of battery

  • @FoamFlingingHS
    @FoamFlingingHS 3 года назад

    "replace flywheelz n stuff"
    Me: yeah okay i can do that
    "replace wiring solder add heatthingy microswitch n stuff"
    Me: mayyyybe not