2007 GMC Sierra / Silverado CV Axle Replacement - How to remove and replace CV Axles
HTML-код
- Опубликовано: 7 окт 2024
- In this video I show you how I replaced the CV Axles on a 2007 GMC Sierra (Chevy Silverado). It's a fairly easy process, even with simple mechanics tools.
If you enjoyed this video and found it helpful, please give it a like (it helps me out!) and browse through my channel for other informative and fun videos. If I’ve earned your subscription, please subscribe and click the bell icon so you will be notified when I post new content.
I appreciate the support!
-----------------------------------------------------
NEW DANINATOR MERCH IS AVAILABLE!
Check it out:
teespring.com/...
Use Coupon Code: DAN10 to save 10%!
-----------------------------------------------------
SPONSORS:
• CarParts.com - (PLEASE USE THIS LINK IF YOU ORDER PARTS FROM CARPARTS.COM) www.carparts.c...
• Super Clean Tough Task Cleaner Degreaser - Visit superclean.com... for a super clean deal - 50% off mail-in rebate!
• Branded Bills
• Lasfit Auto LED Lighting
• Auxbeam
• FIXD app
-----------------------------------------------------
For business inquiries, please contact The Daninator at:
the_daninator@hotmail.com
Instagram: @the_daninator_yt
Vortec V8 LM7, LQ4, LQ9, LS1, LSX, 4.8L, 5.3L, 5.7L, 6.0L, Sierra, Silverado, Z71 4x4 Off Road Ford Dodge Chevy Ram CV Axles Suspension Remove Replace
Disclaimer:
Due to factors beyond the control of The Daninator, I cannot guarantee against improper use or unauthorized modifications of this information. The Daninator assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Daninator recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of The Daninator, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Daninator.
#DIY #CVaxles #thedaninator
As the owner of a 2013 Sierra and a 2003 sierra I appreciate your videos 🤘
I know it been a year since you made this, but I just found out today that if you remove the sway bar links on both sides you have enough room to remove the axle shafts without reomoving the struts. But great video ! Thanks.
Good tip 👍
U don’t have move all that just take the cv axle out
Great video! I did my yesterday. I just removed lower struts bolts and sway bar link pin. A little manipulation & boom badda bing got it done. Thanks for your help.
Nice work!
Thanks dude for showing me how to do this . Made life so much simpler .
Best video I've seen on this topic, liked & subscribed. You sir are a national treasure.
I like that you use basic tools good work
Awesome! Good video, Summary at the end about the simplicity of the job helps others feel confident enough to tackle it! You are correct, the strut removal probably scares enough away from doing this.🤙
Pretty simple fix. I’m just glad the axles weren’t stuck in the hubs! Ain’t nobody got time for that.
True dat.
Good job homeslice getting the shot just did mine on Ford Edge I did seals to and that interesting more ppl should fix there cars
Brother you make it look so easy
Thanks
I’m going to try
Much more simpler with your instructions 😛 Thanks so much 😉😁
Man..... It is so nice when they slide right outta there! I remember the fused CV Axle 😅... Great video!
A “no fuss” repair! Always a welcomed sight!
Glad I watched this video. Thought I had to drop the lower ball joint to get it out. Thanks man 👍👍
I hate paying the "stealership" for work I can do myself, so I really appreciate your content. New sub to your channel, also. My next big project looks like it's going to be a front brake job on my '15 Silverado.
I've got to do this on my truck this weekend. I wonder if it would be enough wiggle room just cranking the wheel over all the way instead of messing with the strut.
Only one way to find out I guess.
Thanks for the video. This doesn't look nearly as complicated as I imagined.
In the same boat as you, let me know if you didnt need to remove the strut!
@@Wombuffet you definitely do. It "should" have enough wiggle room to drop the strut out, but on my truck, it had a small leveling spacer on top, so it was under tension. I had to pop out the outer tie rod end, and the upper ball joint to get it out.
Yes just use a swivel it in your socket and you can wiggle it and get it out
I see there is a little oil leak around were you bolted the cv axel, i have the same oil leak on my 08 sierra, did this stop the leak ? loved the way you explained in this video, doesn't seem to difficult, will be doing this myself after watching this, thanks 😉
Dang that is a cheap cv axle. I just paid $140+ each for mine at Advance Auto Parts.
Great tutorial video. Thank you
Auto parts stores charge double than ordering it yourself
Great video! I wish you would do a cv axle video for a 2nd gen Toyota Tacoma! Most of the videos for it on here are trash!
Can you just remove the sway bar end link and get enough clearance that way? If you remove the side bolted to the diff and lower it-I think you can get it out without messing up any alignment
That’s exactly what I was thinking
thank you for making this video!
Glad it was helpful!
Very informative, how much did you save doing the job yourself would you say? I'm looking at doing the job myself to save some money I have a few tools to buy to get it completed but it looks fairly simple.
Awesome video! Thanks!
You'd benefit practice this with lug nut in place to protect your threads while using the pry bar as a counter lever.
Excellent tip. Thank you!
Used all hand tools that's nice! 💪
Good job man very informative and very good with the cinematography..
Put anti-seize on that axle spline? No more stuck hubs if ya do. 🤘😎
Have to do this in the next few days. Thanks for explaining everything clearly and doing it where there is plenty of light in the video! 🤘🤘🤘
Great how to. Good job
should i put a bit of anti seize on the splines when i put the new axle in the wheel hub?
Yes
Aren’t you suppose to replace both sides of that cv joint axel install. ??? Keep the balance or if one’s out then the other is bound to fail as well soon??? Idk I’m asking
Thanks for the video!!
Do I have to take the strut out or is it basically just convenient to have it off to remove the cv axle ?
It's best to remove the strut, otherwise it's nearly impossible to remove the axel.
Great video!!
Very helpful thanks
are the axles the same on both sides? same part number?
I’ve seen people put locktite blue on those three bolts that hold the strut down. Is that good to do?????????
Nice job, yer awesome!
Yo Daninator can i get an update how the part held up?
So far so good 👍
Put new axel on
And not it only rotates half way around. Is that normal ?
Love your channel im a subscriber now WHERE CAN I GET A XXL CHECK YOUR WALLET SHIRT?
Thanks man. There’s a link in the description of this video. 👍
How about an impact?
You should have showed how to loosen the bottom of that strut
Cannot get that axle nut out for the life of me. Tried the impact and full body weight jumping on a breaker bar
Why did you replace them ?
Anybody got a idea in what cause my 2016 sierra to shake at highway speeds and sway side to side at very low driveway speed?
You can get it out without removing the struck
U don't need to remove the strut to remove the cv axle, just the top ball joint
No parking brake
Get yourself an impact....
You don't need to remove the strut bud🤣
Wouldn't it be easier to just remove brakes , caliper and rotor then the axle Is just limp there
9😊o😊😊9o
Liar
bill nyes an actor