I REALLY appreciate how thorough this video is, it's even helping me seven years later while my late ass finally gets into New Vegas! Thanks a bunch dude
Definitely THE BEST disassemble/reassemble video anywhere. It includes exact model and every last detail from the first clip to the absolute last screw and part in the box, with nothing left out. Two separate disassemble and reassemble videos makes it completely idiot proof. Thanks a million my man, I couldn't find those damned clips to save my life... I wish I could give you a thousand thumbs up...
i took it apart about a week ago and forgot how to put it back together, thanks to your video i was able to put it back together in a timely manner , thanks and keep up the good work.
@FixYourOwnXbox . You made a great assembly video. Here was what issue we were having. The ''Sync Button'' on the Console was ''Hard'' whenever you'd try to use it. ***This was the problem. Ya know those 4 or 5 ''Long Black Screws'' that run through the console, well, the last time I took the console apart to reapply fresh Heatsink Paste, only 1 of the 5 screws were tight. Thus adding just enough flex on the ''Face'' on the console that the sync button couldn't make the proper contact, result, we couldn't sink any of the new controllers. Thanks for doing such a great job. After I started watching you, I could see where the problem was at...
Thanks a lot man, all went smooth. Very good job putting it together. One detail at 9:40 the correct side is the other side for that piece not as you mentioned.
ya me too the face plate cord has no litle white thing that attaches to the xbo 360 is possible that it will work with out it is there a manual button to turn on the xbox without the touch button
how did you put it back together without any scratches??? Me and my friend over here cutting ourselves, struggling to put it together 90 times before we get it right, crap falling everywhere... Did you use to work at Microsoft???
Great video, very detailed! I only had a few minor issues, I had taken apart a port cover and a screw holder which was located beneath the DVD drive, had to disassemble a couple of things before I figured it out. Also you're missing a long screw which goes in 'F', and you swapped something around 9:30, other than that great video!
Okay so I need help. On the front of the xbox, the pieces next to the main glowing button have come out. Place where you can put more chords IN THE FRONT. How do I fix this?
I cant get the side panels to go back in no matter what I try and tried to boot it up with them on the console and can hear the hard drive spinning but nothing is coming up on my screen?
9.43 Wrong Information: The piece that slides in isn’t the one he is showing. Also the video is edited to avoid showing the mistake at 9.55. Be careful guys this mistake can brake your plastic clips and this parts are rare to find.
Dude, thank you so much, i saw your comment right before I was about to start resorting to forcing it in. I wish the guy had corrected himself. I saw he also made a mistake with the black screws too. I hope your pillows will be fluffed up and cold all summer
I would send a message but I'm posting from an iPad. My slim seems heat up quite a bit despite it being in a completely open environment. Is there a heatsink and fan kit I can buy?
Thank you so much man I took apart the Xbox to fix for girlfriend's son. Left it apart for 3 weeks, because I went out of town to work. Came back and totally forgot how I took it apart 🤣🤣 🤣.
I watched your videos on how to take apart Xbox, dick drive and reassemble because my Xbox wouldn't read disks. My drive was bent , bent it back and now it reads disks, but now it keeps freezing.. It didn't do that before I took it apart. Any suggestions on that?
My 11 year old son got on my last nerve I broke his XBOX and banged it on the floor 3 times because I am not beating him anymore. AN XBOX punishment was the worst. This happened back in January. We just put it back together THANKS to YOU! The only reason is he made high honor roll twice and I wasnt buying a new one. Following your direction took us 20 minutes.Had to tape it up some but guess what it works and all his info was still on it.AMAZing! Downside we can only turn it on with a controller
My son pressed the open button and while tray was out he pulled it down. I've done these steps and now my xbox won't open. It turns on but will not open. You can hear that it tries. Help please!
There are multiple errors in this video where he jumps ahead and even fixes things with the camera stopped and than goes right back to filming like it was the altered way the entire time.
isn't it a bad idea to mess around with electronics (like the MB for instance) on a "carpet"? I understand its "turned off and unplugged" but you don't need electricity to create friction which can be pretty damaging in itself... anyway aside from that blatant disregard, nice vid
I’m wondering to this day is my man alive?
Wondered myself
Watched his video 10 years ago when I had Red Rings on my Xbox 360.
I REALLY appreciate how thorough this video is, it's even helping me seven years later while my late ass finally gets into New Vegas! Thanks a bunch dude
Definitely THE BEST disassemble/reassemble video anywhere. It includes exact model and every last detail from the first clip to the absolute last screw and part in the box, with nothing left out. Two separate disassemble and reassemble videos makes it completely idiot proof.
Thanks a million my man, I couldn't find those damned clips to save my life... I wish I could give you a thousand thumbs up...
i took it apart about a week ago and forgot how to put it back together, thanks to your video i was able to put it back together in a timely manner , thanks and keep up the good work.
@FixYourOwnXbox . You made a great assembly video. Here was what issue we were having. The ''Sync Button'' on the Console was ''Hard'' whenever you'd try to use it. ***This was the problem. Ya know those 4 or 5 ''Long Black Screws'' that run through the console, well, the last time I took the console apart to reapply fresh Heatsink Paste, only 1 of the 5 screws were tight. Thus adding just enough flex on the ''Face'' on the console that the sync button couldn't make the proper contact, result, we couldn't sink any of the new controllers. Thanks for doing such a great job. After I started watching you, I could see where the problem was at...
8:46 Black screw in F as well. I wondered why i had one left over..
I had 2 😭
It magically appeared at 8:44🤣🤣
Thanks a lot man, all went smooth. Very good job putting it together. One detail at 9:40 the correct side is the other side for that piece not as you mentioned.
ya me too the face plate cord has no litle white thing that attaches to the xbo 360 is possible that it will work with out it is there a manual button to turn on the xbox without the touch button
thanks a lot bro, your instructions were clear an easy to follow. This helped a lot
These videos you have made are top notch! Out of all the crap on youtube, these videos are actually informative and extreamely helpful!
how did you put it back together without any scratches??? Me and my friend over here cutting ourselves, struggling to put it together 90 times before we get it right, crap falling everywhere... Did you use to work at Microsoft???
couldn't have done it without you. much appreciated
Great video, very detailed!
I only had a few minor issues, I had taken apart a port cover and a screw holder which was located beneath the DVD drive, had to disassemble a couple of things before I figured it out.
Also you're missing a long screw which goes in 'F', and you swapped something around 9:30, other than that great video!
Okay so I need help. On the front of the xbox, the pieces next to the main glowing button have come out. Place where you can put more chords IN THE FRONT. How do I fix this?
You helped me to put my game back together thanks so much your great at what you're doing keep doing it!
how did you tight down the xbox360 slim x-clamp screws did you do one screw at a time
I cant get the side panels to go back in no matter what I try and tried to boot it up with them on the console and can hear the hard drive spinning but nothing is coming up on my screen?
nice tutorial, helped me out but youre missing a t10 screw letter F theres 5 of them holding the chassi to the mother board H,C,L,B, and F
I MADE RUclips ACC JUST TO SAY THAT THIS GUY IS AMAZING!! THANK YOU
Second video ive watched of yours.... You saved me from my fiance being very mad at me. Thank you so much!
9.43 Wrong Information: The piece that slides in isn’t the one he is showing. Also the video is edited to avoid showing the mistake at 9.55. Be careful guys this mistake can brake your plastic clips and this parts are rare to find.
Dude, thank you so much, i saw your comment right before I was about to start resorting to forcing it in. I wish the guy had corrected himself. I saw he also made a mistake with the black screws too. I hope your pillows will be fluffed up and cold all summer
I would send a message but I'm posting from an iPad. My slim seems heat up quite a bit despite it being in a completely open environment. Is there a heatsink and fan kit I can buy?
Before u do all this what materials do u need to put it together and ow many of the materials and how much will it all cost?
How do you put a second hard drive into the slim?
thank u for the video was confused on a few parts but all set now after seeing this
Dude u saved my life! I was confused on some parts but fixed them! Imma Subscribed
does the beige thing have to be close for it to work cause my xbox wont power on
Thank you! This is the best How To, on the Internet.
The tiny green thing in the corner that bends keeps making it to were I can't put the top on someone please help
Thank you so much man I took apart the Xbox to fix for girlfriend's son. Left it apart for 3 weeks, because I went out of town to work. Came back and totally forgot how I took it apart 🤣🤣 🤣.
best video for xbox assembly and dis-assembly
Dude, you helped me a lot. Thanks for posting this
Thank you! Read someone ask if you were still alive. Hope all is well, the video was great.
I watched your videos on how to take apart Xbox, dick drive and reassemble because my Xbox wouldn't read disks. My drive was bent , bent it back and now it reads disks, but now it keeps freezing.. It didn't do that before I took it apart. Any suggestions on that?
You did a great job thanks for helping me to out my game back together!
everythings working except my controller ist working /detecting and my disc tray dosent come out... HELPP
Im back togheter and i dont have power in console what is going on ?Plz help me
i put the blue strip back on but my dvd drive wont open. I know the problem is the blue strip but i cant fix it. any suggestions?
thank you bro you're a life saver !!
Do you have to put the 8 screws in I reassemled my xbox withoutscrewing them in and the xbox doesn't turn on
Thanks
I think the scews act as a ground terminal in some spots at least the ps3 has that feature
Great Video M8...
helped me many times...
Hi so I tried to pop it back in byt for some reason it won't do it
Thanks for the video man i spent like ten minutes trying to put it together wrong
My 11 year old son got on my last nerve I broke his XBOX and banged it on the floor 3 times because I am not beating him anymore. AN XBOX punishment was the worst. This happened back in January. We just put it back together THANKS to YOU! The only reason is he made high honor roll twice and I wasnt buying a new one. Following your direction took us 20 minutes.Had to tape it up some but guess what it works and all his info was still on it.AMAZing! Downside we can only turn it on with a controller
Thank you, Bro! This helped. I liked and subscribed. Awesome job!
I thought the new xbox doesn't have problems at all, does it?
in 2020 you're still the best
Thank you for your video's Sir, you helped me fix my childrens Xbox. Thank you for your kindness.
when i push my eject button nothing happends so sound nothing, but when i push the power button it works fine , how do i fix my eject button?
thank you but i have a HUGE problem i cant turn on my xbox for the console and i cant open my tray drive plzzz help
My son pressed the open button and while tray was out he pulled it down. I've done these steps and now my xbox won't open. It turns on but will not open. You can hear that it tries. Help please!
Did not want to work because i put a wire controller in it and it turned red and it did not turn on any more.
There are multiple errors in this video where he jumps ahead and even fixes things with the camera stopped and than goes right back to filming like it was the altered way the entire time.
I took my 360 apart to clean it, but when I put it back together and turned it on, it had a red light... :(
thanks mon just got my tray fixed took it all the way out and with your video I was able to put it together..hahah...anyways thanks brah!...
Is anyone else having trouble with putting in the black sides at the end, show at 10:00 and 11:10? It won't fit back in for me, any suggestions?
thanks dude your the man, xbox all up and running again :D
Thank you very much whoever you are it was very helpful👌👏
I took some my xbox apart and put it back together and now I cant connect to my xbox live and I still have some months left on memebership
Bro ihave xbox 360s and there are beep but not power on 😭 please help me
you have switched left and right rims in here it made my brain go nuts, go and compare it to disasemble but still thank you
Thank you this video is the most helpful video ever
Fetus I had trouble with that to but I got it it is easier to do with 2 people
Thanks for helping your video was very helpful
really helped but the power button touch sensitive is not working
VboyVela same and its making me mad
Great video very detailed instructions
My Xbox is not backtogether will it be ok like that my fan you can see will it be ok like that
thanks bro you just help me fix my xbox! awsome job man!
My dad smashed my xbox , i assembled it with your help , thanks alot!
My dad would pass over smash
Thanks for this video!
Thanks, you were a big help.
Thank you so much, i just finished flashing my xbox and it had been a while since i took it apart, lol
isn't it a bad idea to mess around with electronics (like the MB for instance) on a "carpet"? I understand its "turned off and unplugged" but you don't need electricity to create friction which can be pretty damaging in itself...
anyway aside from that blatant disregard, nice vid
I LOVE this guy - your a genuis. thank you, just saved my 200 quid....... thank you
how comes u can do
Compared to ps3s these are such a pain to open and put together
9:45 is actually wrong...the side with the even amount of slots goes on the other side...true story.
wish Ive seen this comment earlier. Thanks
My wireless usb to get online, It does not work
indeed, had to figure that one out for myself mayne
Really helped thanks
Yoooo that intro
Thanks for this video, it helped me a lot
?
Grazie a te sono riuscito a rimontare finalmente la mia xbox ;-)
Thanks!! Really helped!
I did this but the touch turn on button isn't working
+Jose Gamboa lol
You are so helpful I thought I lost my Xbox forever
Thanks again!
Great video
you never turned it on? i did everything you said and now it doesn't turn on at all.
Maybe check you connectors ? Sounds like it's your console.
@@ajsingh4545 I did brother took everything apart again and now it's just a brick.
excellent job keep it up
thanks much for helping my dad fix my xbox! xD
Ok, Basically what the fan guard does it guards the fan...LOL CLASSIC
My face plate is still off track
Awsome video my friend, thanks for shareing.........
Thank you my man
Thanks homie!
Thanks so much dude!
u help me alott ...thanks
why would they say yes to those questions...
Thank you king